Connection closed after many connect/disconnect

Hi!
I'm connecting and disconnecting through OCCI many times in short term. After disconnect I run SQL*Loader through system command (in C). When number of that connect/disconnect pair reached about 128 I receive:
SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [0]
ORA-12537: TNS:connection closedWhat should I do to fix this? Maybe some initialize parameter should be changed?

You are probably not releasing the connection handles properly.
Most likely that you are holding the 128 connection objects.
terminateConnection should be called before connecting again.
You can see how many connections are active in Oracle Server

Similar Messages

How do I speak with customer service above 'manager' title-- Incorrectly charged $280 and finally refunded most of it after many hours, disconnects and transfers!

I have been a Verizon Wireless customer for 11+ years. My monthly payments are usually in the $275 range which includes usage for phones and 2 tablets for my family. That's a lot of $ each year!
I am self employed. My biz slows considerably in the winter-- income is slashed. When I realized I couldn't keep the account up this winter-- with an increase in excessive travel costs for my business due to a new long commute for work, and business being down considerably during winter months-- I called in and requested Verizon to suspend service without billing until I can pay my bill in full. They said sure. We worked together to find a workable payment arrangement, which I had to modify a couple of times, but all in all it worked. Thank you Verizon! But then, I went online to pay the amount agreed to. Several days later, I realized Verizon program apparently has a glitch-- it took the full amount due ($563) rather than the agreed amount ($63 then, with agreement to further pay $250 end of April, $250 end of May). I called immediately. Verizon refused to credit back. My bank researched the situation and resolved in my favor :-) Shame on Verizon. You had an opportunity to honor your loyal customer and you failed.
Worse, this created a snowball effect of further charges. Shame on Verizon. Because the account was considered "paid in full", it automatically turned my account back on. When I realized this, I called in and said TURN THEM BACK OFF WITHOUT BILLING!!! They turned them off. Good job Verizon!
I called again, to be absolutely certain the account was turned off 'without billing'. I was assured they were. I had also asked to ensure there would be no disconnect/reconnect fees. I was assured. Good job Verizon! (I thought...)
Just got my bill. It should show $563 (because when I was credited back, it was the entire amount; instead of minus the intended amount of $63).
The bill shows $851.24. Shame on Verizon!!!!
I have spent many hours on the phone with Verizon. I have explained dozens of times, to dozens of representatives. I have been transferred over and over, disconnected over and over. Spoken with representatives, who transferred to supervisors, who eventually one transferred to her manager. The manager stated she has zero power over her supervisors- that if the supervisor wont credit $, that her hands are tied. I have made 6 calls to Verizon since 7:30 this morning, which means I was disconnected 4 times just today. There were 7 calls yesterday, I believe all of those were disconnected as well. I was not yelling or abusive to the staff-- the disconnects occurred during lengthy holds during transfers.
FINALLY, I was connected to JUST A REP who actually took care of me!!!! Out of the $280, I still have $45 left in incorrect charges. I was so relieved to finally get so much removed that I accepted gratefully. I believe the other $45 should also be removed, but I need to rest. Verizon, you really need to give your representatives more power, and more understanding of people-- I have paid thousands of dollars to your company over 11 years. Is it really better business sense to anger a customer of 11 years at approx. $275 per month than to continue a positive relationship with them and give them back what they believe is theirs-- $280 of incorrect charging??? Is $280 'once' more important than $275 'monthly'? You need to look at the big picture. KUDOS to Andre (removed). That representative rocks and deserves a raise for saving your company a $275 monthly customer!
To all the rest of your staff-- including and especially to 'Acacia' (removed)-- get a new job-- you serve little purpose to your customers, other than angering us further. Acacia told me that her manager (Marissa) does not deal with customers... but that as Operations Manager, "Marissa" serves other purposes. Telling your customers that they are at the end of the line speaking with you (Acacia's words) is the WRONG thing to say. If YOU cannot help them because "your hands are tied", get us to someone who can. As you can see, I do not give up. But many do, and perhaps that is why your staff say these things, to get us to stop fighting for what we believe is right.
If you are a Verizon customer-- do not give up-- stand up and fight for what you believe in. It is YOUR money-- spend it wisely. Dont accept yield signs disguised as stop signs. Yield for the moment, and get back on the road. YOU are your best advocate--- you can always count on YOU.
Private info removed as required by the Verizon Wireless Terms of Service
Message edited by: Admin Moderator

The charges occurred when the account was automatically re-activated due to the over-riding of my payment amount online. I had a pmt arrangement to pay $63 that week, but the system over-rode and took out the entire balance due. About gave me a heart attack. When the account was fully paid, its an automatic process to re-activate the account. I have no idea my phones were back on until my daughter said a text and phone call came through. I called Verizon to ask what happened, and asked that they shut them back off for me. But that process accumulated more charges of $15 per line to reactivate and then again to suspend services again. Then they charged an NSF fee for my bank taking back the funds that their system overrode from $63 to $563. If it had withdrawn the amount I had inputted, there would be no funds to pull back. The charges were ridiculous... fee after fee after fee resulted from the over-riding glitch in the system. I dont remember all of the fees, but they added up FAST! All were a result of paying the account online, with them over-riding the payment amount.

I'm trying to connect a BlueTooth headset to my Mac Mini. I can discover it, but soon after discovery it disconnects. Can't figure out how to reconnect. My only option seems to be re-discovery

I can discover the headset, but soon after discovery it disconnects. Haven't been able to figure out how to try to re-connect. And the help section titled "Use BlueTooth has absolutely no information on how to use it. All I can do is re-discover it. Every time I rediscover it, it disconnects shortly afterward. This headset works well with both my iPhone and iPad and has for quite some time. But it won't stay connected to my Mac.

Tried with another headset that works fine with iPhone and iPad. An LG HBS700. Same problem. It connects for maybe 10 seconds and then disconnects. So it must be a problem on the Mac. But this Mini is out of warrentee so taking it into an Apple store to get it repaired isn't a good solution. Maybe as a last resort.
Is there a way to select connect on the Mac? Everything else I've connected a BlueTooth device to has both a command for pairing and a command for connecting or reconnecting. I can't figure out how to select connect on the Mac.

A connection was abortively closed after one of the peers sent an rst packet

Hello,
i have a dvr on netwoek that is wok fine. i tried to publish it over internet.
i have tmg with two wan connections(load Balancing) and two internal networks.
i create a server application rule and and but dvr protcols on it.
when i try to open it from outside it's not working. on tmg log it's give me this error:
A connection was closed because no SYN/ACK reply was received from the server.
also with others dvr i get this error:
a connection was abortively closed after one of the peers sent an rst packet
i tired to read all post on forums but i didn't get a solution for it.
please not that the network rule from internal to external is route and the publish rule is set to make the request is from local host.
so whats the problem?
thanks.

Hi,
Thank you for your post here.
As far as i know, if you would like to publish server located in internal, you need to set the relationship between internal and external as NAT.
Best Regards
Quan Gu

Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.

Hi,
Time to take your iPod in for service.
You can make a Genius Bar reservation in advance if you are in the U.S.
http://www.apple.com/retail/geniusbar/
Carolyn

Applications move between spaces when connecting/disconnecting second display

During the day I'm constantly connecting/disconnecting/reconnecting my 2nd display to my Mac. When I do that a lot I see a few things happen:
- Applications move to different spaces
- One or two of my spaces dissappear
Has anyone come across this issue before and is there any solutions or options I can try out.
Many thanks!

I just ran a hardware test (on ML you must hold down Option-D so it can access the hardware test bits via the 'net) and the test completed without finding any issues. I wonder if the issue has to do with switching between the integrated and discreet graphics.

Dial-up connection disconnects when importing CDs into iTunes

When importing a CD, my dial-up Internet connection disconnects after each song has finished importing. The importing doesn't seem to be affected, but I keep having to reconnect. This is very annoying!
Has anyone else had this problem, and how can I fix it?

This is also a known phenomenon on Macs with a dial-up connection.
For Macs there is a workaround, but no solution yet.
By using an Applescript, the firewall settings will be toggled on CD insert, preventing iTunes to contact Gracenote (to get track information).
I don't know something similar for Windows.
Maybe you can write some code yourself.
The URL to block (temporary) is "http://service.gracenote.com"
You can always get the track information later by selecting all tracks of an imported CD and choosing 'Get CD Track Names' from the Advanced menu in iTunes.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

Dial-up connection disconnecting

When importing a CD, my dial-up Internet connection disconnects after each song has finished importing. The importing doesn't seem to be affected, but I keep having to reconnect.
Does anyone have any idea why this occurs?

hi Michelle!
where do I begin trying to find the culprit?
actually, i just remembered seeing somewhere (i've lost the thread, though) someone reporting a problem with their internet connection that went away after they updated their
b sound card drivers
(of all things).
so let's try working through this document on sound problems in itunes. let's try/check-on
b everything
there, and see if a sort of "audio spring clean" fixes both problems for you.
(thinking here that since neither of us know
b precisely
what's going on, this can at least provide us with a structured place to start our investigations.)
love, b

Dial-up connection disconnects

dial-up connection disconnects after awhile

Upgraded to Firefox 8.0 . . . dail-up lasting a bit longer, but still disconnects.
It seems like nobody is able to help me.
Perhaps the Firefox developers don't care about dial-up users.

Firmware bug? No Connect/Disconnect button on "Manual" PPPoE option

Hi,
To the best of my knowledge this is a firmware bug.
There is no Connect/Disconnect option when choosing "Manual" from the PPPoE settings.
There are two related (unanswered) posts:
http://discussions.apple.com/thread.jspa?messageID=8166971&#8166971
http://discussions.apple.com/thread.jspa?messageID=8137893&#8137893
Is there an official way to report such a bug?
Does anybody have another solution?
Thanks,
Omri

I reported the bug and got this response:
This is a follow up to Bug ID# 6286922. After further investigation it has been determined that this is a known issue, which is currently being investigated by engineering. This issue has been filed in our bug database under the original Bug ID# 5847755. The original bug number being used to track this duplicate issue can be found in the State column, in this format: Duplicate/OrigBug#.

My Passport Essential constant connect disconnect on some windows 8.1 machines

Hi All, I have a 500 GB My Passport Essential, it works fine on my win 7 laptop, and my win 8.1 laptop, but on my win 8.1 pc that I recently built it constantly connect and disconnects. I have tried disabling the hard drive sleep mode settings in power settings, tried using WD Drive Utilities on Win 7 but it wouldnt recognise the drive. Turning off the sleep mode settings did make it show up for a very short while, but after that it was back to connecting and disconnecting. The hdd light turns on, I can hear the drive spinning, and I can hear the connect/disconnect sounds from windows. Any ideas?

Hi, welcome to the community.
It seems might be a power issue or the USB port in the board. Have you tried using another port and another cable? Also making sure in the power settings that the USB are not set to be turned off.

Correct way to cleanup lccs state for Connect/Disconnect functionality

I am trying to implement connect/disconnect functionality but I got some errors - when user connects to another room after disconnect different objects(for example AudioPublisher) may end up in incorrect state. Currently I perform following sequence of actions on disconnect: call stop method on AudioPublisher, call close method on AudioPublisher, and then call close method on ConnectionSession. When I reconnect again AudioPublisher object in wrong states and throws different exceptions("Stream not found", "Stream already exists"). Can you recommend some approach to avoid these errors?
Best Regards, Aleksey

Hi Aleksey,
Seems like using multiple connectsession (connecting to different rooms) is messing your app. We handle most of the clean up in the close & stop methods for AudioPublisher. If you are still facing issues can you share your code.
Thanks
Arun

ASA - ASDM shows Red X Connection Disconnected.

Hi everyone,
I have ASDM connection to ASA.
On the bottom i see Red X with two computers that says
ASA Syslog connection
Status is UP
ASA Monitoring Connection disconnected????????
I still have connection to ASDM need to know what does it mean by connection disconnected?
Thanks
Mahesh

Hi Andrew,
Many thanks for useful link.
Regards
Mahesh

PBG4 v92 modem connect-disconnect

Don't usually have to use dial-up connections, but I needed one today. First time, it worked as usual.
But everytime after (2nd thru 6th attempts) the connect script would scroll in the header, and scroll, then go into an attempted disconnect, except it would never never never complete the disconnect. I'd have to reboot to terminate the endless disconnect ribbon.
The only issue I can think of was while trying to clean up Entourage (while being off-line), I got the spinning beach ball of death.
What could be the connection between Entourage 10.1.1 & 10.3.8 that would render the modem incapable of connecting-disconnecting properly??
I tried repairing permissions/priviledges, but there was nothing reported as needing fixing.
OK, go figure! I'm editing this post using the dial up & internal modem. Connected just fine. Guess I'll have to wait for another "odd-ball" incident.

Similar problems here, but my 'book dials, runs through the various sounds, then repeats them never making the final connection. This problem manifested about 4 months ago. At first, it began losing connections more frequently, then having difficulty making the initial connection on the first try, and now it won't connect at all. The error I get in the connection log window is : "Connection Script Failed." I never get the beach ball.
Solutions I've tried: Rebooting, rebuilding permissions, adjusting the modem script to connect at all available speeds (v.34, etc.), using modem scripts from 10.2.8, doing a clean install of 10.3.3. None have produced any results.
The phone lines in my area are not great. However, I was able to sucessfully connect on said lines for 2 years previously, so I doubt that's the issue. My wife connects, using the same cable on her PC laptop, with no problem.

Connection closed after many connect/disconnect

Similar Messages

Maybe you are looking for