Livecache stopped
hello,
the livecache shuts down automatically when the database manager window is closed. does anyone have an idea why and how this can be resolved?
thanks!
Hi Regina,
that's pretty much not how it should be. Actually there is no such function for shutting down a DB when you close the DBMGUI application.
So to start I would check the following:
- look into the knldiag of the liveCache. Is the liveCache shutdown via DB_OFFLINE command or does it crash (vabort)?
- If it's shutdown via a DBM-Command - check the dbm.prt file for the full command and from which host the DBM Server had been called.
If you don't find the reason yourself - open a support message. As you use liveCache you are a SAP customer and therefore you get support via Support Messages.
Best regards,
Lars
Similar Messages
-
Hello there,
When starting our liveCache in LC10, I encountered an error message stating that "ERROR DBMCLI COMMANDEXECUTE_ERROR when starting liveCache LC1 on server". But nevertheless, the liveCache status turned green. I read the logs in Messages --> Logs --> History and found the following messages: (i replaced the actual password with <b><password of SAPLC1>)</b>
START *****************************
liveCache LC1 (restart)
Thu 09/13/2007
01:23 PM
installation path = c:\sapdb\lc1\db
OK
OK
DBMServer 7.6.00 Build 029-123-130-265
starting LC1 into ONLINE
OK
Creating liveCache application procedures
ERR
-24964,ERR_EXECUTE: error in program execution
3,""c:\sapdb\lc1\db\bin\x_python" "c:\sapdb\lc1\db\env\lapps.py" -R "c:\sapdb\lc1\db" -d LC1 -u SUPERDBA,*"
Installing APPS
Traceback----
File "c:\sapdb\lc1\db\env\installib.py", line 410, in connectAndInstall
installRoutine (session, options)
File "c:\sapdb\lc1\db\env\lapps.py", line 43, in install
"APPS"
File "c:\sapdb\lc1\db\env\installib.py", line 172, in include
install (session, options)
File "c:\sapdb\lc1\db\env\APPS.py", line 75, in install
loaderCmd (session, 'USE USER %s %s' % (sapuser[0], sapuser[1]))
Command----
USE USER saplc1 <password of SAPLC1>
Error----
loader.LoaderError: [-25008] Logon failure; previous user's (SUPERDBA) connection was restored.
ERROR : liveCache LC1 not started
Thu 09/13/2007
01:24 PM
END ******************************
START *****************************
liveCache LC1 (shutdown)
Thu 09/13/2007
01:31 PM
installation path = c:\sapdb\lc1\db
OK
DBMServer 7.6.00 Build 029-123-130-265
stopping LC1
OK
liveCache LC1 successfully stopped.
Thu 09/13/2007
01:31 PM
END ******************************
START *****************************
liveCache LC1 (restart)
Thu 09/13/2007
01:31 PM
installation path = c:\sapdb\lc1\db
OK
OK
DBMServer 7.6.00 Build 029-123-130-265
starting LC1 into ONLINE
OK
Creating liveCache application procedures
ERR
-24964,ERR_EXECUTE: error in program execution
3,""c:\sapdb\lc1\db\bin\x_python" "c:\sapdb\lc1\db\env\lapps.py" -R "c:\sapdb\lc1\db" -d LC1 -u SUPERDBA,*"
Installing APPS
Traceback----
File "c:\sapdb\lc1\db\env\installib.py", line 410, in connectAndInstall
installRoutine (session, options)
File "c:\sapdb\lc1\db\env\lapps.py", line 43, in install
"APPS"
File "c:\sapdb\lc1\db\env\installib.py", line 172, in include
install (session, options)
File "c:\sapdb\lc1\db\env\APPS.py", line 75, in install
loaderCmd (session, 'USE USER %s %s' % (sapuser[0], sapuser[1]))
Command----
USE USER saplc1 <password of SAPLC1>
Error----
loader.LoaderError: [-25008] Logon failure; previous user's (SUPERDBA) connection was restored.
ERROR : liveCache LC1 not started
Thu 09/13/2007
01:31 PM
END ******************************
Another thing is, the actual password is not the same password I changed in DBMGUI and in Integration. Can you please help me with this error and -24964,ERR_EXECUTE: error in program execution keeps appearing in the logs.
Thank you.Hello Deanna Mariel Marasigan,
-> please check which user you set for LCA connection in LC10 -> Integration.
You wrote, that it's SAPLC1. Correct?
-> run the SQL statement as superdba user & check if this user is listed:
select * from domain.users
-> To make sure that the lcinit script works with the correct Standard liveCache
user then you should run the commands to check the
liveCache user in the upc container:
In a dbmcli session (e.g. in LC10 -> liveCache:Monitoring -> Tools)
sql_execute user-type=SAP select user from dual
Should return this user - SAPLC1
When an error returns ( unknown user/password ), then no user is set or wrong password.
To set the new password for Standard user in the upc container run:
dbmcli -d LC1 -n <LC-server> -u control,<control> user_sap SAPLC1,<pwd-new>
( please see the SAP note 616555 for more details ).
This sets the new user/pwd in the upc container.
After that the above command should return the user.
Restart the liveCache in the LC10 transaction.
Thank you and best regards, Natalia Khlopina -
BI 7.6 Latest Trail version after RSA1 action MaxDB stopped
Hi,
BI 7.6 latest trail version i installed after RSA1 activation once system restarted my DISP+WORK.EXE got stopped, please tel me how to resolve when i see log stated below;
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2560] Thu Dec 27 22:17:56 2007
[Thr 2560] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2556
[Thr 2560] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2556) [msxxserv.c 1824]
[Thr 2560] MsInitAclInfo: acl file D:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2560] MsGetOwnIpAddr: my host addresses are :
[Thr 2560] 1 : [200.200.200.201] jagadesh (HOSTNAME)
[Thr 2560] 2 : [127.0.0.1] jagadesh (LOCALHOST)
[Thr 2560] 3 : [192.168.0.100] jagadesh.hsd1.nj.comcast.net. (NILIST)
[Thr 2560] MsHttpInit: full qualified hostname = jagadesh
[Thr 2560] HTTP logging is switch off
[Thr 2560] set HTTP state to LISTEN
[Thr 2560] ms/icf_info_server : deleted
[Thr 2560] *** I listen to port sapmsNSP (3600) ***
[Thr 2560] *** I listen to internal port 3900 (3900) ***
[Thr 2560] *** HTTP port 8100 state LISTEN ***
[Thr 2560] CUSTOMER KEY: >R1490247412<
[Thr 2560] Thu Dec 27 22:19:09 2007
[Thr 2560] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from jagadesh_NSP_00 [msxxserv.c 4679]
[Thr 2604] Thu Dec 27 22:19:14 2007
[Thr 2604] MsSExit: received SIGINT (2)
[Thr 2604] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2556) [msxxserv.c 5944]
++++++++++++++++++++++++++++++
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 2564
Thu Dec 27 22:17:57 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2564) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Dec 27 22:18:02 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >jagadesh_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F20040
DpShMCreate: allocated wp_adm at 04F21A28
DpShMCreate: allocated tm_adm_list at 04F232E0
DpShMCreate: allocated tm_adm at 04F23310
DpShMCreate: allocated wp_ca_adm at 052935A0
DpShMCreate: allocated appc_ca_adm at 05293A50
DpShMCreate: allocated comm_adm at 05293F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05314DB0
DpShMCreate: allocated gw_adm at 05314DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05314E20
DpShMCreate: allocated wall_adm at 05314E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( jagadesh) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >jagadesh_NSP_00 <)
DpStartStopMsg: start msg sent
Thu Dec 27 22:18:03 2007
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Thu Dec 27 22:18:42 2007
ERROR => W0 (pid 2640) died [dpxxdisp.c 14318]
ERROR => W1 (pid 2648) died [dpxxdisp.c 14318]
ERROR => W2 (pid 2656) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 2664) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2672) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 2680) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 2688) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:52 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Dec 28 03:18:52 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2640 Ended no 1 0 0
1 DIA 2648 Ended no 1 0 0
2 DIA 2656 Ended no 1 0 0
3 UPD 2664 Ended no 1 0 0
4 ENQ 2672 Ended no 1 0 0
5 BTC 2680 Ended no 1 0 0
6 SPO 2688 Ended no 1 0 0
Dispatcher Queue Statistics Fri Dec 28 03:18:52 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Fri Dec 28 03:18:52 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Dec 28 03:18:52 2007
=============================
Slots: 20, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:57 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >jagadesh_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2624) (SOFT_KILL)
Stop icman
killing process (2632) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2624 HANDLE:1636)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:58 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2624 HANDLE:1636)
wait for end of icman
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:59 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:00 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2632 HANDLE:1644)
DpStartStopMsg: send stop message (myname is >jagadesh_NSP_00 <)
NiIMyHostName: hostname = 'jagadesh'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Dec 27 22:19:10 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1600 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1600 (pos=2)
SiSelNRemove: removed sock 1600
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1600
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2564) [dpxxdisp.c 10333]
Good Bye .....
+++++++++++++++++++++++++++++
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 27 22:18:03 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
B Library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
B Version of 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.95)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 2640
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2640) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
M DpShMCreate: allocated sys_adm at 04F20040
M DpShMCreate: allocated wp_adm at 04F21A28
M DpShMCreate: allocated tm_adm_list at 04F232E0
M DpShMCreate: allocated tm_adm at 04F23310
M DpShMCreate: allocated wp_ca_adm at 052935A0
M DpShMCreate: allocated appc_ca_adm at 05293A50
M DpShMCreate: allocated comm_adm at 05293F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05314DB0
M DpShMCreate: allocated gw_adm at 05314DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05314E20
M DpShMCreate: allocated wall_adm at 05314E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 27 22:18:04 2007
M ThInit: running on host jagadesh
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.2 BUILD 014-123-152-175
C SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C
C Thu Dec 27 22:18:05 2007
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:database not running) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server jagadesh_NSP_00 on host jagadesh (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 27 22:18:05 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2640) [dpnttool.c 327]
+++++++++++++++++++++++
Regards
JackHi,
BI 7.6 latest trail version i installed after RSA1 activation once system restarted my DISP+WORK.EXE got stopped, please tel me how to resolve when i see log stated below;
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2560] Thu Dec 27 22:17:56 2007
[Thr 2560] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2556
[Thr 2560] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2556) [msxxserv.c 1824]
[Thr 2560] MsInitAclInfo: acl file D:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2560] MsGetOwnIpAddr: my host addresses are :
[Thr 2560] 1 : [200.200.200.201] jagadesh (HOSTNAME)
[Thr 2560] 2 : [127.0.0.1] jagadesh (LOCALHOST)
[Thr 2560] 3 : [192.168.0.100] jagadesh.hsd1.nj.comcast.net. (NILIST)
[Thr 2560] MsHttpInit: full qualified hostname = jagadesh
[Thr 2560] HTTP logging is switch off
[Thr 2560] set HTTP state to LISTEN
[Thr 2560] ms/icf_info_server : deleted
[Thr 2560] *** I listen to port sapmsNSP (3600) ***
[Thr 2560] *** I listen to internal port 3900 (3900) ***
[Thr 2560] *** HTTP port 8100 state LISTEN ***
[Thr 2560] CUSTOMER KEY: >R1490247412<
[Thr 2560] Thu Dec 27 22:19:09 2007
[Thr 2560] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from jagadesh_NSP_00 [msxxserv.c 4679]
[Thr 2604] Thu Dec 27 22:19:14 2007
[Thr 2604] MsSExit: received SIGINT (2)
[Thr 2604] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2556) [msxxserv.c 5944]
++++++++++++++++++++++++++++++
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 2564
Thu Dec 27 22:17:57 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2564) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Dec 27 22:18:02 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >jagadesh_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F20040
DpShMCreate: allocated wp_adm at 04F21A28
DpShMCreate: allocated tm_adm_list at 04F232E0
DpShMCreate: allocated tm_adm at 04F23310
DpShMCreate: allocated wp_ca_adm at 052935A0
DpShMCreate: allocated appc_ca_adm at 05293A50
DpShMCreate: allocated comm_adm at 05293F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05314DB0
DpShMCreate: allocated gw_adm at 05314DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05314E20
DpShMCreate: allocated wall_adm at 05314E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( jagadesh) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >jagadesh_NSP_00 <)
DpStartStopMsg: start msg sent
Thu Dec 27 22:18:03 2007
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Thu Dec 27 22:18:42 2007
ERROR => W0 (pid 2640) died [dpxxdisp.c 14318]
ERROR => W1 (pid 2648) died [dpxxdisp.c 14318]
ERROR => W2 (pid 2656) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 2664) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2672) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 2680) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 2688) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:52 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Dec 28 03:18:52 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2640 Ended no 1 0 0
1 DIA 2648 Ended no 1 0 0
2 DIA 2656 Ended no 1 0 0
3 UPD 2664 Ended no 1 0 0
4 ENQ 2672 Ended no 1 0 0
5 BTC 2680 Ended no 1 0 0
6 SPO 2688 Ended no 1 0 0
Dispatcher Queue Statistics Fri Dec 28 03:18:52 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Fri Dec 28 03:18:52 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Dec 28 03:18:52 2007
=============================
Slots: 20, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:57 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >jagadesh_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2624) (SOFT_KILL)
Stop icman
killing process (2632) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2624 HANDLE:1636)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:58 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2624 HANDLE:1636)
wait for end of icman
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:59 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:00 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2632 HANDLE:1644)
DpStartStopMsg: send stop message (myname is >jagadesh_NSP_00 <)
NiIMyHostName: hostname = 'jagadesh'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Dec 27 22:19:10 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1600 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1600 (pos=2)
SiSelNRemove: removed sock 1600
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1600
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2564) [dpxxdisp.c 10333]
Good Bye .....
+++++++++++++++++++++++++++++
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 27 22:18:03 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
B Library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
B Version of 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.95)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 2640
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2640) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
M DpShMCreate: allocated sys_adm at 04F20040
M DpShMCreate: allocated wp_adm at 04F21A28
M DpShMCreate: allocated tm_adm_list at 04F232E0
M DpShMCreate: allocated tm_adm at 04F23310
M DpShMCreate: allocated wp_ca_adm at 052935A0
M DpShMCreate: allocated appc_ca_adm at 05293A50
M DpShMCreate: allocated comm_adm at 05293F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05314DB0
M DpShMCreate: allocated gw_adm at 05314DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05314E20
M DpShMCreate: allocated wall_adm at 05314E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 27 22:18:04 2007
M ThInit: running on host jagadesh
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.2 BUILD 014-123-152-175
C SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C
C Thu Dec 27 22:18:05 2007
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:database not running) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server jagadesh_NSP_00 on host jagadesh (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 27 22:18:05 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2640) [dpnttool.c 327]
+++++++++++++++++++++++
Regards
Jack -
To initialize the liveCache instance LCA
Hi all,
I am getting error in initialize the liveCache instance LCA. I am doing a post livecache installation activity.
Please see below error
"Server: usalpapsq339
Users: DDIC
Logical Command: DBMRFC
Parameter: exec_lcinit -e unicode init
Name and Server : LR4 - usalpapsq339
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit -e unicode init
Error : DBM Error
Return Code : -24964
Error Message : ERR_EXECUTE: Error in program execution#
0,sap/lcinit LR4 init -e UNICODE -uDBM , -uDBA , -uSQL ,
liveCache LR4 (init)
The liveCache state is ONLINE
DBMServer 7.7.07 Build 020-123-236-782
Stopping LR4
Starting LR4 into ADMIN
Executing ACTIVATE SERVERDB
Loading SYSTEM TABLES
Creating user LR4ADM with DEFAULTCODE UNICODE
topping LR4
tarting LR4 into ADMIN
xecuting ACTIVATE SERVERDB
oading SYSTEM TABLES
reating user LR4ADM with DEFAULTCODE UNICODE
topping LR4
tarting LR4 into ONLINE
reating liveCache application procedures
nabling user LR4ADM
RROR : liveCache LR4 not initialized (see "/sapdb/data/wrk/LR4/lcinit.log")."
tail -25 /sapdb/data/wrk/LR4/lcinit.log
SAPTS_RELATIONS_GET
SAPTS_RELATION_GET_DETAIL
SAPTS_REMOVE_LAYER
SAPTS_REPLACE_COMPLETE_TSKF
SAPTS_SET_DATA
SAPTS_SET_DATA_OLD
SAPTS_SET_DATA_RIW
SAPTS_SET_INITIAL_DATA
SAPTS_SET_INITIAL_DATA_OLD
SAPTS_SET_UNIT
SAPTS_TIMESERIES_GET
SAPTS_TRACE_FILTER
SAPTS_UPDATE_TIMESERIES
==================================
Installation successfully finished
==================================
Enabling user LR4ADM
ERR
-24988,ERR_SQL: SQL error
-2014,Identifier too long
ERROR : liveCache LR4 not initialized
02.02.2011
18:54
END *****************************
Can somebody helpHi
Please post in the below forum
SAP MaxDB
Best Regards
Vinod -
Cannot open SQL connection to liveCache LCA
Hi All,
when I'm trying to start liveCache I'm getting an error: "Cannot open SQL connection to liveCache LCA".
Operational state is online.
Kernel - 7.7.07
Next steps are successful:
"LC10 -> liveCache monitoring -> Tools -> dbmcli ::
a) sql_execute select * from users"
From Alert monitor I see an error: "Instance ONLINE, but no SQL access possible". If i try connection test, thenI see:
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4025
For detailed information, see the developer trace for work process: 2
How to see this developer trace I do not know...Mark, I have this tool installed.
In those logs I found that:
Thread 0x1A8 Task 35 2010-11-30 23:30:20 Pager 20018: First DataCacheSegment:31
Thread 0x1A8 Task 1 2010-11-30 23:30:21 SrvTasks 31: Permanently reserved 13 servertasks for 'Backup / Restore'.
Thread 0x1A8 Task 1 2010-11-30 23:30:21 SrvTasks 31: Permanently reserved 2 servertasks for 'Backup / Restore'.
Thread 0x1A8 Task 1 2010-11-30 23:30:21 SrvTasks 31: Permanently reserved 1 servertasks for 'Savepoint'.
Thread 0x1A8 Task 1 2010-11-30 23:30:21 RTETask 18: Kernel initialization done
DESCRIPTION:
The initialization of the Kernel components has finished. All special tasks are started now.
Thread 0x1A5 Task - 2010-11-30 23:30:21 RunTime 3: State changed from STARTING to ADMIN
Thread 0x1A5 Task - 2010-11-30 23:30:21 STATE 19601: SERVERDB is ready
============================================ begin of write cycle ==================
Thread 0x1AA Task 71 2010-11-30 23:30:22 CONNECT 19633: Connect req. (LCI, T71, connection obj. 0x000007FFFFE30BF0, Node:'kleva', PID: 6676)
Thread 0x1AA Task 71 2010-11-30 23:30:22 ERR RTEIO 12: attach of volume DATA_VOLUME_0001 failed during open,VOLUME_NO=1,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=1776
DESCRIPTION:
An error accurred when trying to add the volume DATA_VOLUME_0001 with the logical number 1 to the configuration and physically attach it.
ACTION:
Contact your system administrator. Show him the error message which points to an operating system configuration error and then contact the database support if your system administrator can not fix the error.
2010-11-30 23:30:22 ERR RTEIO 1: The opening of path 'C:\sapdb\LCI\sapdata\DISKD0001' failed,DESCRIPTION=CreateFile(READWRITE,OPEN_EXISTING),ERRORTEXT=The system cannot find the file specified.
,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=2385
DESCRIPTION:
An attempt to open the path 'C:\sapdb\LCI\sapdata\DISKD0001' failed. The operating system returned the error code 2 and the error text 'The system cannot find the file specified.
'. The complete command line reads 'CreateFile(READWRITE,OPEN_EXISTING)'.
Thread 0x1AA Task 71 2010-11-30 23:30:22 ERR Admin 3: Database state: OFFLINE,_FILE=Kernel_Administration.cpp,_LINE=692
2010-11-30 23:30:22 KernelComm 6: Internal errorcode, Error code 9050 "disk_not_accessible"
2010-11-30 23:30:22 ERR Admin 20017: RestartFilesystem failed with 'I/O error',_FILE=Kernel_Administration.cpp,_LINE=410
Thread 0x1AA Task 71 2010-11-30 23:30:22 CONNECT 19651: Connection released (LCI, T71, connection obj. 000007FFFFE30BF0)
Thread 0x1AA Task 71 2010-11-30 23:30:22 RTEKernel 112: Offline KILL requested
Thread 0x1AA Task 71 2010-11-30 23:30:22 RunTime 3: State changed from ADMIN to SHUTDOWNKILL
Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR Messages 7: Begin of dump of registered messages,_FILE=Msg_List.cpp,_LINE=3527
Thread 0x1A0 Task - 2010-11-30 23:30:19 RTEHSS 13951: No hot standby node configured -> No HotStandby configuration
Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR RTEIO 1: The opening of path 'C:\sapdb\LCI\sapdata\DISKD0001' failed,DESCRIPTION=CreateFile(READWRITE,OPEN_EXISTING),ERRORTEXT=The system cannot find the file specified.
,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=2385
DESCRIPTION:
An attempt to open the path 'C:\sapdb\LCI\sapdata\DISKD0001' failed. The operating system returned the error code 2 and the error text 'The system cannot find the file specified.
'. The complete command line reads 'CreateFile(READWRITE,OPEN_EXISTING)'.
Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR RTEIO 1: The opening of path 'C:\sapdb\LCI\sapdata\DISKD0001' failed,DESCRIPTION=CreateFile(READWRITE,OPEN_EXISTING),ERRORTEXT=The system cannot find the file specified.
,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=2385
DESCRIPTION:
An attempt to open the path 'C:\sapdb\LCI\sapdata\DISKD0001' failed. The operating system returned the error code 2 and the error text 'The system cannot find the file specified.
'. The complete command line reads 'CreateFile(READWRITE,OPEN_EXISTING)'.
Thread 0x1A0 Task - 2010-11-30 23:30:22 KernelComm 6: Internal errorcode, Error code 9050 "disk_not_accessible"
Thread 0x1A0 Task -Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR Admin 3: Database state: OFFLINE,_FILE=Kernel_Administration.cpp,_LINE=692
2010-11-30 23:30:22 KernelComm 6: Internal errorcode, Error code 9050 "disk_not_accessible"
2010-11-30 23:30:22 ERR Admin 20017: RestartFilesystem failed with 'I/O error',_FILE=Kernel_Administration.cpp,_LINE=410
Thread 0x1A0 Task -Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR Messages 8: End of the message list registry dump,_FILE=Msg_List.cpp,_LINE=3555
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 61: rtedump written to file 'rtedump'
Thread 0x1A6 Task 3 2010-11-30 23:30:22 Trace 20000: Start flush kernel trace
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 111: Tracewriter resumed
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 94: Waiting for tracewriter to finish work
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 116: Tracewriter termination timeout: 1200 seconds
Thread 0x1A6 Task 3 2010-11-30 23:30:22 Trace 20001: Stop flush kernel trace
Thread 0x1A6 Task 3 2010-11-30 23:30:22 Trace 20002: Start flush kernel dump
Thread 0x1A6 Task 3 2010-11-30 23:30:22 Trace 20003: Stop flush kernel dump
Thread 0x1A6 Task 3 2010-11-30 23:30:22 RTEKernel 110: Releasing tracewriter
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6712 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6868 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEThread 13: The thread Requestor_LCI is finished
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEThread 13: The thread LegacyRequestor is finished
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6836 joining
Thread 0x1AC Task - 2010-11-30 23:30:22 RTE 20214: CONSOLE thread stopped
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6716 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6860 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6708 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6864 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 58: Backup of diagnostic files will be forced at next restart
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 118: SERVERDB LCI has stopped
2010-11-30 23:30:22 RTEKernel 14: Kernel version: Kernel 7.7.04 Build 029-123-196-543
Thread 0x1A0 Task - 2010-11-30 23:30:22 RunTime 3: State changed from SHUTDOWNKILL to STOPPED
Thread 0x1A0 Task - 2010-11-30 23:30:22 TENANT 20005: Tenant database LCI has stopped
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Looks like I'm not authorized to created folders/files in 'C:\sapdb\LCI\sapdata\'? But I can... -
Uploading ibooks... when to stop?!
im uploading ibook to itunes and it seems there is no way of know its done.... after uploading the book here is what i got:
the next button is grayed out... it seems like deliver button is the only viable option. but ive been clicking the deliver a few times now and it seem its uploading the same thing over and over?
i need help =(Hello Chris,
It's NOT mandatory to stop livecache via LC10 every time SAP and the SAP database(Oracle) is stopped/bounced.
If you would like to bounce the SCM system you need to run the following steps:
-> Stop the liveCache in LC10 transaction; < stop x_server, if it's planned >
-> Stop the application server & SCM database -> stopsap
-> Start the application server & SCM database -> startsap
-> < start x_server, if it's stopped on the livecache server >
Start the liveCache in LC10 transaction
For example, the liveCache need to stopped if you are going to run the livecache
upgrade or reboot the livecache server.
When you are going to restart the liveCache the liveCache application users need to be informed about the downtime, when the liveCache will be not available and the liveCache application jobs/activities & CIF queues need to be stopped for the liveCache restart procedure.
For SAP liveCache documentation in English < See the SAP note 767598 >:
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
Thank you and best regards, Natalia Khlopina -
Not able to bring livecache instance into online state
Hi Folks,
I am trying to do a livecache copy for our scm 4.0 ,from our production system into our dev.. I am following note 457425.
I have successfully restored the database using DB gui, and now the instance is in "ADMIN" mode, while bringing it up into "ONLINE" mode, it gives me the following error;
dbmcli on LCA>db_online
ERR
-24895,ERR_SHUTDOWN: shutdown of database occured
-71,connection broken server state 6
This is what the knldiag file contains,I have truncated most part of the file and showing only the last 30 lines or so..
2008-08-27 19:31:35 89 53000 OBJECT Restarted Garbage coll: 0
2008-08-27 19:31:35 89 54003 dynpool DYNP_K51_LOCK_LIST : 75531152
2008-08-27 19:31:35 89 54003 dynpool LOCK maxlocks : 300000
2008-08-27 19:31:35 89 54003 dynpool LOCK items : 902400
2008-08-27 19:31:35 89 54003 dynpool LOCK Regions : 24
2008-08-27 19:31:35 89 54003 dynpool LOCK TransRegions : 8
2008-08-27 19:31:35 89 54003 dynpool LOCK RegionGlob+Space : 3456
2008-08-27 19:31:35 89 54003 dynpool LOCK TransGlob : 768
2008-08-27 19:31:35 89 54003 dynpool LOCK SupplyItemsPerRgn : 100
2008-08-27 19:31:35 89 54003 dynpool LOCK SupplySize : 192000
2008-08-27 19:31:35 89 54003 dynpool LOCK RowHash entries : 300000
2008-08-27 19:31:35 89 54003 dynpool LOCK TabHash entries : 60000
2008-08-27 19:31:35 89 54003 dynpool LOCK Row+Tab hash size :2880000
2008-08-27 19:31:35 89 54003 dynpool LOCK Trans entries : 328
2008-08-27 19:31:35 89 54003 dynpool LOCK trans_list size : 73472
2008-08-27 19:31:35 89 54003 dynpool LOCK TransPtrList : 2624
2008-08-27 19:31:35 89 54003 dynpool LOCK TransHash entries : 328
2008-08-27 19:31:35 89 54003 dynpool LOCK TransHash size : 2688
2008-08-27 19:31:35 89 54003 dynpool LOCK SupplyPoolSegments: 9000
2008-08-27 19:31:35 89 54003 dynpool LOCK SupplyPoolSize : 72216000
2008-08-27 19:31:35 89 54003 dynpool LOCK ObjColl_list size : 10496
2008-08-27 19:31:35 89 54003 dynpool LOCK ObjReq_list size : 5248
2008-08-27 19:31:35 89 ERR 20028 Log DBIdentifier of DataVolume (tpcscmpd:LCA_20061019_161059) and LogVolume (TPCSCMD
D:LCA_20060613_163702) does not mat
2008-08-27 19:31:35 89 ERR 20028 Log ch
2008-08-27 19:31:35 89 11000 vdetach '/sapdb/LCA/saplog/DISKL001' devno 3 T77
2008-08-27 19:31:35 11 12822 TASKING Thread 149 joining
2008-08-27 19:31:35 149 11566 stop DEVi stopped
2008-08-27 19:31:35 11 12822 TASKING Thread 150 joining
2008-08-27 19:31:35 150 11566 stop DEVi stopped
2008-08-27 19:31:35 89 WNG 20026 Admin Initialization of log for 'restart' failed with 'LogAndDataIncompatible'
2008-08-27 19:31:35 89 20040 Admin Kernel state: 'OFFLINE' reached
2008-08-27 19:31:35 89 12696 DBSTATE Change DbState to 'SHUTDOWN'(25)
+++++++++++++++++++++++++++++++++++++++ Kernel Exit ++++++++++++++++++++++++++++
2008-08-27 19:31:35 0 12845 DBSTATE Kernel exited normal
2008-08-27 19:31:35 0 12808 DBSTATE Flushing knltrace pages
2008-08-27 19:31:36 0 11560 COMMUNIC Releasing T77
2008-08-27 19:31:36 0 12696 DBSTATE Change DbState to 'OFFLINE '(29)
Kindly help.> I have done the recovery using database manager gui 7.5 by using recovery option. Infact the log area was empty.
Yes - it may have been empty but it was not formatted - thus the error message.
You can try (on command line/shell):
dbmcli -U c -uUTL util_execute clear log
and after that try to bring the DB online again.
Markus -
Application error during release to LiveCache
Hi Experts.
I got some orders stucked in my Outbound Queue in ECC side as SysFail with the error "Application error during release to LiveCache". When I click to activate the queue the order is released and transferred to APO. The question is Why is getting stopped?
Thank you!Hi Everybody.
SAP Provided me a note to implement to fix this issue. The note number is 1238616 but I need to understand how to reproduce this error in SandBox to implement this note and check if the problem will get fixed...
Currently my OSS is assigned to SAP (Live Cache team) to let me know the root cause for this problem and how to reproduce in lower environment (sandbox) to implement the note and check if the problem will get fixed.
As work around we are manually activating these errors in CIF queues that are getting clean. -
Hi,
I was migrating our SCM 5.1 /Livecache 7.7.03 from Sun Solaris to IBM AIX. The export and import went very well and the sap is up and running now. But, the Livecache is not able to start using LC10 transaction (stop is working with LC10). I use DBM GUI to start. I get a small popup with the following error while try to start using LC10:
20.08.2010 05:49:30
Server: saplc122
Users: 985342IN
Logical Command: DBMRFC
Parameter: exec_lcinit restart
Name and Server : LCP - ushensv122
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit restart
Error : DBM Error
Return Code : -24964
Error Message : ERR_EXECUTE: error in program execution#
256,sap/lcinit LCP restart -uDBM , -uDBA , -uSQL ,
liveCache LCP (restart)
The liveCache state is OFFLINE
DBMServer 7.7.03 Build 023-123-174-368
Starting LCP into ADMIN
ERROR : liveCache LCP not restarted (see /sapdb/data/wrk/LCP/lcinit.log).
=================================================================================
The lcinit.log contents are :
START ****************************
liveCache LCP (restart)
Fri Aug 20 02:48:45 UTC 2010
installation path: /sapdb/LCP/db
operating system : AIX
OK State OFFLINE
DBMServer 7.7.03 Build 023-123-174-368
Starting LCP into ADMIN
ERR
-24994,ERR_RTE: Runtime environment error
1,Check knldiag! Kernel died before reaching ADMIN state (OS error code 11000)
ERROR : liveCache LCP not restarted (see /sapdb/data/wrk/LCP/lcinit.log).
Fri Aug 20 02:48:56 UTC 2010
END *****************************
Can any one please help?
Thanks
SasiHi,
The note which you mentioned is not applicable to me. My LC version is 7.7.03 and my issue is not able to start Lc via LC10.
Any one any suggestion please?
Thanks, -
Livecache crashes when starting dbanalyzer after 7.9.08 build 17 Upgrade
Hello,
We upgraded our livecache to 7.9 build 17. The scm side is upgraded 713 SP3. After we upgraded the livecache, when we start
livecache from LC10, livecache db starts up but when it starting dbnalyzer (dban_start ...), it crashes livecache and stop livecache. We can start
and stop livecache from dbmcli and livecache performs fine without dbanayzer. We also noticed after the upgrade, 7.9 does not like the maxcpu parameter =6. We had to lower that to 1 to start livecache as well.
Steps for Reconstruction
go to LC10 or dbanalyzer, try to start livecache or DB
analyzer:
WP_66 tracefile:
*** ERROR => EXECUTE C_0004 on connection 1, rc=-10807
bslsdb.cpp 9487]
SQLCODE : -10807
SQLERRTEXT : Connection down: [4] connection broken by kernel CRASH
sc_p=1160ce650,no=4,idc_p=
(nil),con=1,astyle='font-family:courier'
style='font-family:courier'
style='font-family:courier'
ct=1,slen=24,smax=256,#vars=0,stmt=1161936d0,table=dual
select 'Ping' from dual ;
***LOG BY2=> sql
error -10807 performing OPC [dbds 437]
***LOG BY0=> Connection down: [4] connection broken by kernel
CRASH [dbds 437]
Disconnecting from connection 1 ...
connection 1 is already down :
rc=-10821
SQLCODE : -10821
SQLERRTEXT : Session not connected
Now
I'm disconnected from MaxDB
start dbanlyzer using dbmcli:
mdt2ds11:li3adm> dbmcli -d LI3 -u control,control dban_start
ERR
-24994,ERR_RTE: Runtime environment error
4,connection broken server state 4
We have created an oss message as well and waiting a response from SAP..
Thanks
DinaliHi Deepak,
Sorry for the delay. We had to wait for root access.
Attached 03 new files. The issue we have is on IA3 system. Ia1 system does not have the issue and we upgraded that few weeks ago. You can see the sapdb client versions are different on IA3 higher than IA1. sdbverify did not show any errors.
The system has the issue starting lkivecache thru LC10:
Installation: CL_IA3 /sapdb/clients/IA3
Base 7.9.08.17 valid 64 bit
DB Analyzer 7.9.08.17 valid 64 bit
Fastload API 7.9.08.17 valid 32 bit
JDBC 7.6.09.00 valid
Loader 7.9.08.17 valid 64 bit
Messages MSG 0.10302 valid
ODBC 7.9.08.17 valid 32 bit
Redist Python 7.9.08.17 valid 64 bit
SAP Utilities 7.9.08.17 valid 64 bit
SQLDBC 7.9.08.17 valid 32 bit
SQLDBC 76 7.6.06.27 valid 64 bit
SQLDBC 77 7.9.08.17 valid 32 bit
The other working system has
Installation: CL_IA1 /sapdb/clients/IA1
Base 7.9.08.16 valid 64 bit
Fastload API 7.9.08.16 valid 32 bit
JDBC 7.6.09.00 valid
Loader 7.9.08.16 valid 64 bit
Messages MSG 0.10302 valid
ODBC 7.9.08.16 valid 32 bit
Redist Python 7.9.08.16 valid 64 bit
SAP Utilities 7.9.08.16 valid 64 bit
SQLDBC 7.9.08.16 valid 32 bit
SQLDBC 76 7.6.06.27 valid 64 bit
SQLDBC 77 7.9.08.16 valid 32 bit
Thanks
Dinali -
Cannot bring liveCache database into "warm" mode
Hello,
We recently added disk capacity to our liveCache server and when we were adding data volumes one of the devices that was assigned to a log volume was also assigned to a new data volume.
When we stopped the database and re-started it, we started getting the following errors:
2006-02-21 10:25:05 364 ERR 11000 page0io_ Illegal file format
2006-02-21 10:25:05 364 ERR 11000 page0io_ blocksize wanted: 8192, blocksize found: 0
2006-02-21 10:25:05 148 ERR 11000 vattach dev0_vattach returned FALSE
2006-02-21 10:25:05 148 ERR 13 IOMan Attach error on Log volume 1: Could not open volume
2006-02-21 10:37:59 148 ERR 27 IOMan DevNo from Log volume in configuration and info page are different: 2 vs 31
2006-02-21 10:54:50 148 ERR 27 IOMan DevNo from Log volume in configuration and info page are different: 2 vs 31
2006-02-21 11:08:54 148 ERR 27 IOMan DevNo from Log volume in configuration and info page are different: 2 vs 31
2006-02-21 11:08:54 148 ERR 51080 SYSERROR -9209 Message not available
2006-02-21 11:20:44 148 ERR 27 IOMan DevNo from Log volume in configuration and info page are different: 2 vs 31
2006-02-21 11:20:44 148 ERR 51080 SYSERROR -9209 Message not available
2006-02-21 11:22:36 148 ERR 27 IOMan DevNo from Log volume in configuration and info page are different: 2 vs 31
2006-02-21 11:22:36 148 ERR 51080 SYSERROR -9209 Message not available
It appears that we've either corrupted or destroyed one of our log volumes so the database will not start. Our recovery method of choice would be to re-initailize our database and restore from a good backup, but recently found out our backups are no good.
We've also tried to clear the logs using the 'util_execute clear log' command, but that is not working either:
dbmcli on LCT>util_execute clear log
ERR
-24988,ERR_SQL: sql error
-902,Message not available
Does anyone have any ideas on how we might be able to fix the issue and save our database?
Thanks.
MatthewHI,
Im facing up the same problem, by restoring a Livecache from 2 differents servers.
10-04-15 09:49:41 603 11597 IO Open '/DISK/backup_log/bck_data' su
ccessfull, fd: 59
2010-04-15 09:49:41 603 ERR 11000 page0io_ Illegal file format
2010-04-15 09:49:41 603 ERR 11000 page0io_ blocksize wanted: 65536, blocksize
found: 131072
2010-04-15 09:49:41 603 ERR 11000 d0_aopen max_block_cnt changed to 16
Did you manage to solve the pb?
Thanks
John -
Hi Guys,
I have some problem in live cache in APO , i was posting in APO forum could not able to find clear findings
so i am diverting my questions here in this forum
basically the APO and R/3 system are running smoothly with no problem in CIF
but accidently we done the below steps
Entered into transaction LC-10
Click Live cache Monitoring
click the folder - Administration
click Operating under - configuration
There are two Icon bar - start LiveCache and stop LiveCache
First i clicked stop and then after few minutes i click start
After some time i try to open the Product view in APO, the system says Live cache not available
can some one help me in this regard
Thanks
RajHi,
Here is the log you asked me
veCache LC1 (restart)
Mon 10/15/2007
03:00 AM
installation path = e:\sapdb\lc1\db
OK
OK
DBMServer 7.6.03 Build 008-123-159-187
starting LC1 into ONLINE
OK
Creating liveCache application procedures
OK
0,OK: everything works fine
0,""e:\sapdb\lc1\db\bin\x_python" "e:\sapdb\lc1\db\env\lapps.py" -R "e:\sapdb\lc1\db" -d LC1 -u SUPERDBA,*"
Installing APPS
Droping Procedures
LC1ADM
SAPTS
SAPLCK
SAPAPO
SAPATP
SAPREP
SAPSIM
SAPRPM
DBPINSTALL
Creating Procedures
LC1ADM
dbpinstall
FORCE_CHECKPOINT
WAIT_FOR_CHECKPOINT
FORCE_AND_WAIT_FOR_CHECKPOINT
SAPAPO
APS_COM_VERSION_GET
APS_PROPAREA_CHANGE
APS_PROPAREA_GET_DATA
APS_PEGAREA_CHANGE
APS_PEGAREA_GET_DATA
APS_PROPAREA_GET_ALL
APS_ORDERTYPE_GET_ALL
APS_ORDER_GET_ALL
APS_PEGID_GET_ALL
APS_IPPE_GET_ALL
APS_RESOURCE_GET_ALL
APS_PLAN_VERS_GET_ALL
BAS_PLAN_VERS_GET_ALL
APS_PLAN_VERS_GET_ALL_DEFECT
APS_PCM_GET_ALL
APS_OBJECT_GET_ALL
APS_OBJECT_EXISTS
APS_CONTAINER_CHANGE
APS_CONTAINER_GET_DATA
APS_GET_ALL_CONTKEYS
APS_PLAN_VERSION_CHANGE
APS_PLAN_VERSION_GET
APS_THROW_DBP_ERROR
APS_SCHEMA_CREATE
APS_SCHEMA_DELETE
APS_SCHEMA_GET_ALL
APS_SCHEMA_GET_ALL_DEFECT
APS_TIME_GET
APS_MIXIN_ATP_DELTAS
APS_MLEVEL_ATP_PROT_DEL
APS_REORG_ATP
APS_REPAIR_ATP
APS_GET_ATP_DATA
APS_ALERTS_GET_DATA
APS_ALERTS_IN_ORDER_NET
APS_ALERTS_DELAY_ORDER_NET
APS_TRACELEVEL_READ
APS_TRACELEVEL_CHANGE
APS_TRACELEVEL_GET_ALL
APS_TRACE_WRITE
APS_CUST_GET_DATA
APS_CUST_CHANGE
APS_CHECK_PERS_DATA
APS_PERS_OBJ_EDIT
APS_IPPE_CHANGE
APS_IPPE_GET_DATA
APS_IPPE_GET_ORDERS
APS_IPPE_GET_BY_IO
APS_ORDER_GET_TIMES
APS_RG_OF_COVER_MATRIX
APS_RANGE_OF_COVER_GET
APS_OPT_GET_ACTIVITY_NET
APS_OPT_GET_ACTIVITY_NET2
APS_OPT_UPDATE_ACTIVITY_NET
APS_BS_SEND64
APS_PERFTEST_1
APS_PERFTEST_2
APS_PERFTEST_3
APS_PERFTEST_4
APS_PERFTEST_5
APS_PERFTEST_6
APS_PERFTEST_7
APS_PERFTEST_8
APS_PERFTEST_9
APS_PERFTEST_COMB
APS_PERFTEST_READ_100
APS_PERFTEST_WRITE_100
APS_PERFTEST_READ_1000
APS_PERFTEST_WRITE_1000
APS_PERFTEST_READ_8000
APS_PERFTEST_WRITE_8000
APS_PERFTEST_TRANSMISSION
APS_IO_RESET_NETCHG_FLAG
APS_ORDER_GET_DATA
APS_ORDER_CREATE
APS_ORDER_CHANGE
APS_ORDER_DELETE
APS_ORDER_MODIFY
APS_FLEX_ORDER_CHANGE
APS_CHARACT_MODIFY
APS_CONSTRAINT_MODIFY
APS_PEGID_SELECT_ORDERS
APS_ORDER_GET_REQMTS
APS_ORDER_GET_SUPPLY
APS_PCM_DELETE
APS_PCM_GET_ORDERS
APS_PEGID_GET_IO
APS_PEG_REFRESH_IO
APS_PEGID_COUNT_IO
APS_PEGID_GET_VIRT_PEG
APS_PEGID_GET_ORDERS
APS_PEG_CAT_GET_ORDERS
APS_SEARCH_DESC_CHAR
APS_FIX_PEGGING_CHANGE
APS_PEGARC_TYPE_CHANGE
APS_PEGPARAM_CHANGE
APS_PEGID_GEN_PM_TRACE
APS_ACT_STATUS_CHANGE
APS_ACT_UNPLAN
APS_ACT_GET
APS_SFW_INITIALIZE
APS_SFW_IONODE_SCHEDULE
APS_SFW_GET_NEXT_SET
APS_SFW_SCHEDULE_SET
APS_SFW_TERMINATE
APS_STOCK_TSERIES_CMP
APS_STOCK_TSERIES_GET
APS_ACT_SCHEDULE
APS_ACT_GET_BY_RES
APS_ACT_GET_BY_ORDER
APS_ACT_GET_BY_PEGAREA
APS_RESOURCE_GET
APS_ORDER_GET
APS_PEGAREA_GET
APS_PROD_GET_BY_PEGAREA
APS_CUS_ORDER_CHANGE
APS_CUS_ORDER_GET
APS_CUS_SCHD_GET_BY_PEG
APS_CUS_SCHD_GET_BY_IO
APS_DELIVERY_CONF
APS_DELIVERY_MESSAGE
APS_FORECAST_GET_BY_PEG
APS_RESOURCE_CHANGE
APS_RESOURCE_GET_DATA
APS_CAPA_PROFILE_GET
APS_PERS_OBJ_ANALYZE
APS_RES_COLL_MERGE
APS_RES_MAX_COLL_BUFFER
APS_STOCK_CHANGE
APS_STOCK_GET
APS_STOCK_GET_BY_UID
APS_SETUPMATRIX_CHANGE
APS_SETUPMATRIX_UPDATE
APS_SETUPMATRIX_GET_DAT
APS_RESOURCE_GET_BRUTTO
APS_TIMING_PATTERN_GET
APS_BUCKETS_GET_NETTO
APS_DATE_VECTOR_CHANGE
APS_DATE_VECTOR_GET
APS_TIMESTREAM_CHANGE
APS_TIMESTREAM_GET_DATA
APS_TIMESTREAM_GET_BY_RES
APS_TLO_GET_RANGE
APS_TRANS_ORDER_CHANGE
APS_TRANS_ORDER_GET
APS_DRP_AMOUNT_GET
APS_DRP_FLOW_GET
APS_DRP_IO_GET
APS_DRP_CONTI_IO_GET
APS_SNP_ORDER_GET
APS_SNP_CAPA_GET
APS_SPP_FORECAST_MODIFY
APS_SPP_PUR_REQ_MODIFY
APS_SPP_FORECAST_EXT_MODIFY
APS_SPP_ORD_AMOUNT_GET
SAPAPO_COMTEST_1
SAPAPO_COMTEST_2
SAPAPO_COMTEST_NEW_PLANVERS
APS_SET_TEST_PARAMS
SAPAPO_CLEANUP
SAPAPO_RESET_GLOBALS
SAPATP
SAPATP_READ_TIMEAXIS
SAPATP_READ_CSV_ARRAY
SAPATP_SETUP_TIMEAXIS
SAPATP_CLEAR_TIMEAXIS
SAPATP_CHECK_AVAILABILITY
SAPATP_LS_LOGFILES
SAPATP_RM_LOGFILES
SAPATP_CREATE_MATRIX_OBJECT
SAPATP_DELETE_MATRIX_OBJECT
SAPATP_GET_MATRIX_OBJECTS
SAPATP_REORG_MATRIX
SAPATP_GET_CHAR_KEY
SAPATP_GET_CHAR_KEY_MULTI
SAPATP_GET_CHAR_LIST
SAPATP_READ_MATRIX
SAPATP_MATRIX_FIND_VERSIONS
SAPATP_READ_VPL_TIMEAXIS
SAPATP_READ_BUCKET_PARAMS_SIM
SAPATP_READ_TIMEAXIS_BOMID
SAPATP_PAC_CHECK
SAPATP_DELTA_EXIST_ANCHOR
SAPATP_DELTA_GET_REMOVE_ATP
SAPATP_DELTA_GET_REMOVE_ALLVPL
SAPATP_DELTA_GET_AGGREGATES
SAPATP_DELTA_GET_POSG_ATP
SAPATP_DELTA_READ_TOTAL
SAPATP_DELTA_READ_TRGUID_APS
SAPATP_DELTA_READ_DELNRAPS
SAPATP_DELTA_ADD_ATP
SAPATP_DELTA_UPD_ALLVPL
SAPATP_DELTA_UPD_ATP
SAPATP_DELTA_COMPRESS_APS
SAPATP_DELTA_REMOVE_TRGUID
SAPATP_DELTA_UPD_POSG_ATP
SAPATP_DELTA_GET_UPD_POSG_ALVP
SAPATP_DELTA_CHANGE_POSGUID
SAPATP_DELTA_REMOVE_DATE
SAPATP_DELTA_GET_PLUIDS_F_TRG
SAPATP_DELTA_GET_PLUIDS_F_DAT
SAPATP_DELTA_CLEAR_ANCHOR
SAPATP_DELTA_GET_ALL_ADMIN_ANC
SAPATP_DELTA_DELETE_ALLOC_ANC
SAPLCK
LCK_ENQUEUE
LCK_DEQUEUE
LCK_RELOAD
LCK_CONSISTENCY
LCK_LIST_ALL
LCK_LIST_SINGLE
LCK_LIST_BY_AREA
LCK_LIST_BY_OWNER
LCK_LIST_BY_USER
LCK_LIST_OWNERS
LCK_DEQUEUE_OWNER
LCK_STATISTICS
LCK_ENQUEUE02
LCK_DEQUEUE02
LCK_LIST_ALL02
LCK_LIST_SINGLE02
LCK_LIST_BY_AREA02
LCK_LIST_BY_OWNER02
LCK_LIST_BY_USER02
SAPSIM
SIM_SIMSESSION_CONTROL
SIM_SIMSESSION_COPY
SIM_SIMSESSION_SAVEAS
SIM_SIMSESSION_UNDO
SIM_SIMSESS_HAS_DELTAS
SIM_SIMSESSION_GET_DATA
SIM_SIMSESSION_GET_DELTAS
SIM_SIMSESSION_GET_ALL
SIM_SIMSESSION_GET_ACTIVE
SAPREP
REP_INIT
REP_CLOSE
REP_CHECK
REP_CHECK_MULTI
REP_ACKNOWLEDGE
REP_REVERT
REP_RETHEAD_READ
REP_RET_READ
REP_CAPA_CHANGE
REP_DEMAND_CHNG
REP_PLNVERS_READ
REP_PLVERS_READ
REP_TX_READ
REP_DELTAS_REORG
REP_CONSI_CHK
REP_DELPOS_DEL
REP_NEWPOS_DEL
REP_DELPOS_GET
REP_NEWPOS_GET
REP_REVERT_MULTI
REP_INST_DELETE
REP_INST_CREATE
REP_DEM_INIT_REC
REP_CHECK_EXIST
REP_TIMELINE_CRE
REP_INST_CHECK
REP_CHK_LOCK_GET
REP_CHK_LOCK_SET
REP_CHK_LOCK_DEL
REP_DELTA_DISP
REP_POSGUID_DISP
REP_CORR_QTY
REP_CHECK_NEW
REP_RESERVE_DEBUG
REP_ACKN_RES_FOR_TX_DEBUG
SAPRPM
RPM_ACTS_FOR_WORKCENTER
RPM_ADD_NODES
RPM_BF_CALC_ORDER_STATUS
RPM_BF_DELETE_ORDER_STATUS
RPM_BF_MODIFY_STATUS
RPM_BF_READ_ORDER_STATUS
RPM_CHG_R_ORD_CF
RPM_COPY_RES_ORD
RPM_CREATE_MATRIX
RPM_CUSTOMIZING_MODIFY
RPM_CUSTOMIZING_READ
RPM_DEL_RES
RPM_DEL_RES_ORD
RPM_DELETE_MATRIX
RPM_DELETE_ONE_CONFIG
RPM_MATRICES_FOR_CUOBJ
RPM_MATRICES_FOR_ORDID
RPM_MATRICES_FOR_ORDID_MUL
RPM_MATRICES_REORG
RPM_MATRIX_PROPERTIES
RPM_MATRIX_PROPS_UPDATE
RPM_MODIFY_CONFIGS
RPM_MODIFY_ONE_CONFIG
RPM_PARKED_ORDERS_READ_ALL
RPM_READ_A_R_ORD
RPM_READ_ALL_ACTIVITIES
RPM_READ_ALL_CONFIGS
RPM_READ_ALL_NODES
RPM_READ_ALL_ORDERS
RPM_READ_ALL_POSVARS
RPM_READ_ALL_RES
RPM_READ_ALL_TOKENS
RPM_READ_CONFIGS_W_TOKENS
RPM_READ_ONE_CONFIG
RPM_READ_ONE_ORDER
RPM_READ_ORDER_BOM
RPM_READ_ORDER_BOM_MUL
RPM_READ_ORDER_SEQUENCE
RPM_READ_ORDERS_FOR_POSVAR
RPM_READ_POS4RS1
RPM_READ_POS4RS2
RPM_READ_RES_ORD
RPM_READ_RES4POS
RPM_READ_ROW_BITS
RPM_REORG_HARD
RPM_REORG_PARKED_ORDERS
RPM_REORG_SOFT
RPM_REQS_FOR_MATERIAL_2
RPM_ROWIDS_FOR_WORKCENTER
RPM_SESSION_SWITCH
RPM_STORE_ACTIVITIES
RPM_STORE_ORDER_SEQUENCE
RPM_STORE_ORDERS
RPM_STORE_POSVARS
RPM_STORE_R_BITS
RPM_STORE_R_ORD
RPM_STORE_RESTR
RPM_STORE_TOKENS
RPM_TIME_LINES_CREATE
RPM_TIME_LINES_DELETE
RPM_TIME_LINES_READ
RPM_TRANSPOSE_PV_MATRIX
RPM_TRANSPOSE_TOKEN_MATRIX
RPM_TRANSPOSED_CONFIGS
RPM_UPDATE_ROW_BITS_TABLE
RPM_WRKCINFO_DELETE
RPM_WRKCINFO_MODIFY
RPM_WRKCINFO_READ
SAPTS
SAPTS_ADAPT_SEASONALITY
SAPTS_AGGMULT_TIMESERIES
SAPTS_AGGSINGLE_TIMESERIES
SAPTS_ASSOCIATE_CH
SAPTS_CALC_DATA
SAPTS_CALC_SNP_INFLOW
SAPTS_CHANGE_CH
SAPTS_CHANGE_FIX_DATA
SAPTS_CHANGE_KF
SAPTS_CHANGE_PT
SAPTS_CHANGE_RELMODE
SAPTS_CHANGE_SH
SAPTS_CHANGE_TG
SAPTS_CHRANGES_IN_AGG
SAPTS_CLEAN_OBJECTS
SAPTS_COMTEST
SAPTS_CONS_OBJECTS
SAPTS_COPY_DATA
SAPTS_CREATE_INCONS_OBJECTS
SAPTS_CREATE_NEW_LAYER
SAPTS_CREATE_REGISTER
SAPTS_CREATE_RELATION
SAPTS_CREATE_SNP_RELATION
SAPTS_CREATE_TIMESERIES
SAPTS_DELETE_KEZ_TS
SAPTS_DELETE_REGISTER
SAPTS_DELETE_RELATION
SAPTS_DELETE_SNP_RELATION
SAPTS_DELETE_TIMESERIES
SAPTS_EXTR_CH_GET
SAPTS_EXTR_CH_SET
SAPTS_EXTR_KF_GET
SAPTS_EXTR_KF_SET
SAPTS_EXTR_PT_GET
SAPTS_EXTR_PT_SET
SAPTS_EXTR_TG_GET
SAPTS_EXTR_TG_SET
SAPTS_EXTR_TSBUF_GET
SAPTS_EXTR_TSBUF_SET
SAPTS_EXTR_TSBUS_GET
SAPTS_EXTR_TSBUS_SET
SAPTS_EXTR_TSH_GET
SAPTS_EXTR_TSH_SET
SAPTS_EXTR_TSKF_GET
SAPTS_EXTR_TSKF_SET
SAPTS_EXTR_TSRLSNP_GET
SAPTS_EXTR_TSRLSNP_SET
SAPTS_EXTR_TSRL_GET
SAPTS_EXTR_TSRL_SET
SAPTS_EXTR_TS_GET
SAPTS_EXTR_TS_SET
SAPTS_GET_AGGREGATED_DATA
SAPTS_GET_AGGREGATED_DATA_RIW
SAPTS_GET_ALL_DATA
SAPTS_GET_ALL_DATA_RIW
SAPTS_GET_DATA
SAPTS_GET_DATA_RIW
SAPTS_GET_INITIAL_DATA
SAPTS_GET_REG_OBJECTS
SAPTS_GET_TS_INFO
SAPTS_GET_TS_INFO2
SAPTS_INITIALIZE_DATA
SAPTS_OBJECTS_BY_CHREF
SAPTS_OBJECTS_BY_KFREF
SAPTS_OBJECTS_BY_TGREF
SAPTS_OBJECTS_GET_ALL
SAPTS_OBJECTS_IN_AGG
SAPTS_OBJECTS_QUERY_STATE
SAPTS_QUERY_OBJECTS
SAPTS_READ_CH
SAPTS_READ_KF
SAPTS_READ_PT
SAPTS_READ_SH
SAPTS_READ_TG
SAPTS_REDISAGG_DATA
SAPTS_REGISTERS_GET
SAPTS_RELATIONS_GET
SAPTS_RELATION_GET_DETAIL
SAPTS_REPLACE_COMPLETE_TSKF
SAPTS_SET_DATA
SAPTS_SET_DATA_RIW
SAPTS_SET_INITIAL_DATA
SAPTS_SET_UNIT
SAPTS_TIMESERIES_GET
SAPTS_TRACE_FILTER
SAPTS_UPDATE_TIMESERIES
==================================
Installation successfully finished
==================================
Enable user LC1ADM
OK
OK
liveCache LC1 successfully started.
Mon 10/15/2007
03:00 AM
The Problem we face is before this problem happen we created planning version name 000 , when we open the product view system says planning version is not available
please advise me
Thanks
Raj -
Installation problems of livecache 7.6 (SCM 5.0 SR2)
I am having problems installing livecache on IA64 HP-UX 11.23. I get up to phase create database instance then I get the following errors.
sapinst.log:
INFO 2007-06-13 22:20:42
Authorizations set for /sapdb/ALP/sapdata.
ERROR 2007-06-13 22:20:43
CJS-00030 Assertion failed: SdbOperations.getDbRoot returned undefined value, please check the database installation
ERROR 2007-06-13 22:20:43
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-06-13 22:20:43
FCO-00011 The step sdb_create_volumes_fs with step key |LIVECACHESERVER|ind|ind|ind|ind|0|0|SdbInstanceDialogs|ind|ind|ind|ind|4|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_create_volumes_fs was executed with status ERROR .
XCMDOUT.LOG:
> Subprocess starts at 20070613221823
Execute Command : /sapdb/programs/bin/dbmcli -n dbciASP db_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070613221824
Error! Connection failed to node dbciASP for database (no dbname):
protocol error
> Subprocess starts at 20070613221903
Execute Command : /sapdb/programs/bin/dbmcli -n dbciASP inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070613221903
Error! Connection failed to node dbciASP for database (no dbname):
protocol error
> Subprocess starts at 20070613222042
Execute Command : /sapdb/programs/bin/dbmcli -n dbciASP inst_enum
Start subprocess as user with uid: root
> Subprocess stops at 20070613222043
Error! Connection failed to node dbciASP for database (no dbname):
protocol error
Can someone please help as I am out of ideas.
Thanks.Hi,
if you're an official SAP customer, please open an official OSS message on queue BC-DB-LVC(-INS). An open Telnet-connection would greatly ease and speedup the analysis of the issue.
My 2 cts on your issue:
I suggest you check the liveCache software installation using 'sdbverify' to make sure that at least the software is installed correctly and all permissions are set as they should. Note <a href="https://websmp104.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=546737&_NLANG=EN>">546737</a> shows more details about sdbverify.
I think the sapinst.log and XCMDOUT.LOG look rather strange, because the sapinst.log shows the liveCache sid to be 'ALP", whereas XCMDOUT.LOG shows DBMCLI commands to a liveCache instance named 'dbciASP' .
I don't think the 'dbciASP' is correct! Can't realy tell where it came from though, without a connection.
Regards,
Roland -
Gurus:
Would you please help tell how to start/stop an Xserver?
Thanks!Hi Linda Li,
Basically it depends on enviroment and If it's unix then it depends on how you configure your scripts in /etc/init.d
1. If you are looking for on how to start & stop XServer for environment APO/LiveCache & MaxDB then below are commands
x_server [<options>] [start]
x_server stop
2. If its on general UNIX then
If you're in X and want to stop it, bring up the terminal window and type:
init 3
To start X from the command line, type either:
startx
or
init 5
I hope this helps you.
Thanks and best regards
Sekhar -
ST22 timeout for all LC related transactions LIVE cache start stop working from LC10
Hi Team
we are a getting a ST22 timeout for all LC related transactions LIVE cache start stop working from LC10
LC version 7.9
OS AIX
SAP SCM 7
SDBVERIFY giving the following error
Checking package Redist Python
Checking package Loader
Checking package ODBC
Checking package Messages
Checking package JDBC
Checking package DB Analyzer
ERR: Failed
ERR: Checking installation "Legacy" failed
ERR: Group of directory /sapdb/data/config/install changed [0 =>
sdbregview -l is showing good.
any idea what might went wrong.
trying to use sdbverify -repair_permissions , but not sure about the exact syntax to use.
and it is not related to timeout parameter, we tested with different timeout values, but still the same error.
thanks
Kishore ChHello Kishore,
you could check the sizing of the liveCache data.
* Report /SAPAPO/TS_LCM_REORG_SNP has checks of the SNP planning areas for superfluous objects.
* Delete old/temporary APO data.
* /SAPAPO/TS_LCM_REORG report checked TS superfluous objects.
If you didn't create the planning versions, copy of planning versions & data load to liveCache, then create the SAP message to check your system on the question of the dataarea usage.
If you have the long running APO transactions => performance of the SCM system has to be checked.
If you have the bottleneck in liveCache & could not solve the case by yourself => create the SAP message to BC-DB-LVC and get SAP support.
Best regards, Natalia Khlopina
Maybe you are looking for
-
Hello, I try to send pdf file as attachments file to mail with XI. I use with this blog https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816 My problems is: 1. to all mails that I send have another
-
How do you display Movies only in iPhoto?
How do you display Movies only in iPhoto?
-
I want to give my book air to a friend how do I reset to original status
Is there a way to reset the book air so I can start from scracth and set it up for my doughter
-
Hi, have any one tried printing a barcode in a classical abap report? if yes, then send procedure & piece of code for it
-
Two constantly repeating messages in log
Both systems are running 10.5.6 server and are xServes. DNS is working properly and both systems use the internal campus DNS and do not run their own DNS services (Which has been working fine for nearly 2 years now). I receive the following error onc