Lj cm1415 All-in-One printer software will not install in Windows XP

Have windowsxp and no problem with my printer and scanner, lj cm1415fnw, then the scanner stopped working.
my IT guy uninstalled and now we can't install. Error message, does not support this windows software?
It did before, Help please
thanks Terry

Hi Terry,
Try installing the latest drivers below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-85658-7&cc=us&dlc=en&lc=en&...
As well ensure you have full administration rights to install the software, a such may appear due to insufficient permissions of your user account.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

My HP printer software will not install. stated that it no longer supported PowerPC software

I have an HP 5610 All in one printer and while I can still print, I can no longer scan documents. The HP software cannot be re-installed due to a "Power PC" matter. It is no longer supported by Apple. Does this mean I have to buy a new printer.

the web site for that printer is:
http://support.hp.com/us-en/drivers/selfservice/closure/hp-officejet-5600-all-in -one-printer-series/441142/model/441143#…
Here's what it says (There's no download available - so No Download button shown):
This document applies to HP printers supported in Mac OS X v10.10 Yosemite, v10.9 Mavericks, v10.8 Mountain Lion, v10.7 Lion, and v10.6 Snow Leopard that only have drivers available through Apple Software Update.
Install the best available Mac printer driver and software from Apple Software Update.
NOTE:
Where is the download button? The HP printer driver is built into Apple’s Software Update feature on your Mac computer. Your printer is likely supported through Apple Software Update and you do not need to download anything from a website in order to print, scan, or fax.

3005pr software will not install on Windows 8

Hi,
I am using a 3005pr port replicator on a Spectre XT 4010nr laptop running Windows 8
I was rupdating the software for the port replicator and the install prompted me to uninstall the previous version and I said yes. It had to reboot to complete the uninstall so I rebooted systems.
Now when I try to install the port replicator software I get the error:
"A previous uninstall of HP Port Replicator Software is not yet complete. Please reboot your computer and run this installer again to installation."
I've rebooted, powered off, confirmed the port replication software is not installed through ARP, confirmed the device is not listed in Device Manager. But still see the above error any ideas how to reinstall the software?
Thank you

Try the Windows Installer Cleanup Utility:
http://www.techsupportforum.com/attachments/windows-xp-support/6696d1147451985-cannot-uninstall-prog...

HELP!!!! HP Officejet 6500A Plus e-All-in-One Printer - E710n - will not stay online

I have 2 desk tops a net book and a lap top connected to it and all test printed fine and then after a period of time the printer goes off line and then it will not work. I can restart the printer and it still will not work. The router does not even "see it" although it can ping it...??? I have reinstalled software and restored factory settings... I tried saving the IP that did not help. It is brand new and I checked and it has the most recent firmware updates. I have run network test reports and all is fine. I tried an HP print diagnostic and it can't see the printer. I got it to work temporarily after completing a router reboot, but now that is not working either. I just bought this today and I have spent the last 5 hours researching and troubleshooting. I am not overly tech savvy and I have exhausted my knowledge base and the info suggested on blogs and fix it sites.
I was replacing my hp all in one wired printer that the print head just went out on after only a little over a year. I don't know if I need to return this printer or if there is a magic fix??? Please help!

You can refer to the link below for the paper sizes and types supported by this printer here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02291053&tmp_task=prodinfoCategory&cc=sg&dlc=en...
I work for HP.

HP Photosmart Premium All-In-One driver software will not fully install

After downloading and installing the full version of the printer driver (both from on-line site AND from purchased driver CD), the software appears to download fine, but will not fully install. I have run Print and Scan Doctor and tried on-line support, uninstalling, reinstalling the drivers and have tried on-line HP support. My new computer (HP Envy 715 xt) is less than 3 weeks old. I am running Windows 7 Professional 64 bit. The printer/scanner/copier/fax worked fine on my old computer which ran Windows XP. I have tried everything - HP on-line support will not speak to me without charging me, even though my computer is brand new - they insist the problem is with the printer, which is out of warranty.

Hello Deb!
I would recommend performing an L3 uninstall, and reinstalling.
I am listing the L3 uninstall steps below:
-Launch your temp folder
-Go to the 7z folder
-Go to the util\CCC folder
-Launch the uninstall_L3.bat file
Please let me know the results!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printer software will not install

I have recently upgraded to Mountain Lion and use a Canon iP4950 printer. Some of the options had disappeared, such as the quality and media, although it would print. In trying to find where, or how to get to the options, I have obviously done something as the printer has 'vanished' and will not recognise the software so I downloaded the update for the printer from the Apple website and now get a message saying that the installation was successful - but still it won't recognise the software and I am getting a message saying "can't install the software for the Canon iP4900 series because it is not currently available from the Software Update server:.
Can anybody help please?

Problem solved by restarting the machine! Hope this helps

Photosmart A software will not install on Windows 8.1

I have a Photosmart A536 printer and Microsoft Surface Pro 3 running Windows 8.1-x64.
The printer is connected and I see a CD drive HP_A530_series with a setup program. When
I run it I get a dialog telling me to go to the HP download site for my printer. I went there and
downloaded the driver for my O/S, (A530_140_301.exe. The file runs but all that happens is
the same dialog saying "please download the driver from the HP website". I have tried
redownload, reboot, run as admin, run in compatibility mode.
I went to this forum and found the suggestion to download the printer installation wizard,
hppiw.exe, and install and run it. I did so and it ran and said it was looking for devices and
then it exited with no action.
Please advise.

Hi @MKairys
Please look at the discrepancy between the compatibility listed, and the description of the file;
Description
Windows XP x64/Vista 64/Mac OS X v10.4-v10.5: Download includes HP Photosmart Software Driver and support links for product. Windows XP 32/Vista 32/Windows 7 32 and 64: No software download for printer. Printer includes HP Quick Connect, which installs when you connect the printer to your computer.
^^ This makes no mention of Windows 8 or 8.1
Compatibility:
Microsoft Windows 8 (32-bit)
Microsoft Windows 8 (64-bit)
Microsoft Windows 8.1 (32-bit)
Microsoft Windows 8.1 (64-bit)
Microsoft Windows 8 Enterprise (32-bit)
Microsoft Windows 8 Enterprise (64-bit)
Microsoft Windows 8 Pro (32-bit)
Microsoft Windows 8 Pro (64-bit)
Microsoft Windows 8.1 Pro (32-bit)
Microsoft Windows 8.1 Enterprise (64-bit)
Microsoft Windows 8.1 Enterprise (32-bit)
Microsoft Windows 8.1 Pro (64-bit)
A530_140_301.exe
Perhaps this would be helpful; Problems printing from Surface can be caused by hardware issues like disconnected cables, software i... I have a feeling though that this may loop too, it says it is compatible then advices you install the free driver, and takes you back to the HP website - A530_140_301.exe. I feel your pain, I am going in circles!
I don't think there actually is a driver for 8.1. You could try an alternate print driver; How to Assign Alternate Print Drivers in Different Versions of Windows.
Please let me know what happens if you try an alternate print driver.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Laserjet 1320 Toolbox software will not install on Windows 7

I bought this 1320 for my xp and the toolbox worked fine. Bought a Windows 7 and the same software fails to install. Running setup and it says there is some kind of java error. i have java installed, use it all the time and it works fine. I try to install the software using other 'exe' or 'setup' files and it tells me to use the windows drivers. The printer works fine, but I want the toolbox to tell me ink level.
update: I finally found the "ini" setup and windows 7 is not supported. So, is there anyway to get new s/w for W7?

If you have a 1320n, then the easiest way to check your ink level would be the Embedded web server (EWS). Put your IP address into your browser and this will take you to the EWS. From there you will be able to check the ink levels of your printer.
Otherwise, toolbox is not available for the windows 7 OS.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Hp Solution Centre software will not install on windows 8.1

I have just replaced my old HP Laptop with a new HP Pavilion 15 Notebook PC and have managed to install my Hp Photosmart C4780 printer but am unable to get the software for the Hp Solutions to install. I have downloaded the file from the Hp site and it states it should work on Windows 8.1 but it extracts the files and then does nothing . I have run print and scan doctor about 10 times now but after many frustrated hours no joy. Worked perfectly on Windows 7 premium but doesnt want to know with WIndows 8.1

Hi,
Carefully follow the steps below and check if that may resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans.
Click on Real time scanning and then on Turn Off.
select Never and confirm by clicking the Turn Off button.
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Reboot your PC
8. Run the installation file and check for any difference.
9. Once you are done, be sure to open McAfee and re-activate Real Time Scanning.
Please let me know of any progress,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I uninstall my Canon all-in-one printer software?

How do I uninstall my Canon all-in-one printer software? I followed the online HELP instructions of moving the apps to TRASH. But I still had lots of files, and one app, that I could not get rid of.

Huh! How simple can it be?
Thank you, very much. I still have a few Canon files and one app remaining. I'll send them to the trash. But, the really annoying scanner icon on the bar at the top of the screen is gone.
Thanks, again.
Dave

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Hi,
I suggest uninstalling the printer drivers from your HP printer. The go to System Preferences> Printer & Fax and in the printer list box go ahead and reset the printing system. Do that by right clicking over the printer list box ad the option should appear. After that close system preferences and reinstall your printer drivers from the HP CD. After installation check if your printer works as expected, if it does, stop here and ignore the rest of the message.
If you don't have the install CDs for the printer or the previous step does not work; connect your printer to your Mac via USB and then again go to system preferences. Open the Print & Fax menu and in the printer list box you should see a "+" sign. Click on it, and a new window should appear with a list of printers that are available to you. If that's the case, go ahead click your printer name and wait for the computer to look in the Apple servers for the drivers. When searching is finished click the "install" button. This process will open software update and install the neccesary drivers.
After that, you should be able to scan documents with the Preview App.
For more information on the printing system in OS X Snow Leopard visit:
http://support.apple.com/kb/HT3771
Hope this helps!

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

With my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why

with my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why isn't it possible?? Bad ssoftware while downloading it from internet because I lost CD rom. No pilot available for scanning with it??? Bad version of soft??? I bauught this printer because of his utility and space occupped: able to print, copy and scan in same machine, gain of room, perfect, but my scanning function is not working!!!! I would like to solve this damned problem which upset me since several weeks.... Waiting for an answer and a solution, best regards

pmonteil31 wrote:
Waiting for an answer and a solution, best regards
Hi,
Sorry you have to wait longer because I can not find your printer model under Google. Must be very old ?
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error.

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error stating please insert black ink cartridge.
Please Help

Make sure it is a genuine HP cartridge. Take it out and clean the contact on the cartridge and in the printer. Try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Airport extreme software will not install on vista, how can i still configure the router?

airport extreme software will not install on vista, how can i still configure the router? Trying to help someone with vista get an airpot extreme configured. 10.0.1.1 does not work, the software will not install correctly on their vista machine. How can I get into the base tation and lock it down?

Hi - Vista can be tricky - I need more info to see if I can be of some help - first, is the Vista machine a desktop or a laptop and is it fully up to date with Windows Update (sp2 or higher)? - next, are you trying to install Airport Utility version 5.5.3 which is the correct one for Vista? - and finally, what do you mean "it will not install" - what kind of error messages or evidence are you getting?

Lj cm1415 All-in-One printer software will not install in Windows XP

Similar Messages

Maybe you are looking for