LMS 3.2 Windows - 10 minute timeout while using TACACS+ Login Module

Hello,
we have changed our login module to TACACS+ (Non-ACS). All works fine when we use users which are set up in TACACS+. Using an account which does not exist (or only exists in CiscoWorks Local login module - even as fallback user) we register a timeout of 10 minutes until the login module fails the request (turned on Debugging and watching the stdout.log of tomcat). While running the backup.pl script it seems that the user "admin" tries to access the web server, but as this user is not set up in TACACS+ we have to wait 20 or more minutes until the backup starts. So, is there a way to set a timeout value for that login module?Is it known that the admin account is needed to perform the backup?
Thanks and kind regards
Allessandro

This delay is coming from your TACACS server.  Can you shorten the authentication failure there?  As for the user ID, check your System Identity User under Common Services > Server > Security > System Identity Setup.  Make sure this use exists in the TACACS databases.

Similar Messages

  • Error while using the function module..pack_handling_unit_dlvry

    Hi all...
    while using the function module pack_handling_unit_dlvry,
    we need to pass the handling unit number as per the functionality we require.
    but the mandatory field for the function module is the handling unit number in the form of bar code..
    so how to use this function module..
    All the useful answers will be regarded..
    Regards,
    Saroja.

    Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.

  • Error in CC while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module

    Hi,
    We are getting an error in CC monitoring while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module for converting IDoc XML to flat file. Below is the error text:
    "Message processing failed. Cause: com.sap.conn.idoc.IDocParseException: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZDELVRY3>: state=READING_FIELD_VALUE_TAG, charPosition=7404, lineNumber=2, columnNumber=7366"
    Any suggestion how to resolve it.
    Regards
    Pravesh

    Please check the OSS note below and install the mentioned patch accordingly:
    [Note 1278687 - Exception in the IDocXMLProcessor (IDOC_ERROR_PARSE_FAILURE)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1278687]
    If it persists, check if are there any mapping errors on the Audit Logs for the failed message.

  • Dropdown values are missing while using the function module KCD_EXCEL_OLE_TO_INT_CONVERT

    Hi all,
    when i am trying to upload the excel template by using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT" to an internal table some field values are missing.
    i am using the function module " KCD_EXCEL_OLE_TO_INT_CONVERT"  and i am uploading an excel template and downloading that excel data into an internal table but some field values are missing while uploading the excel template and i found that the field which contains the drop down list values those values are missing.
    And also when i am uploading the excel template by using the function module" KCD_EXCEL_OLE_TO_INT_CONVERT"  when i am coming out of this function module one pop up is coming. how can i avoid this popup, can any one please provide me the solution thanks in advance.
    FYI...it is showing the below popup screen ..
    Thanks,
    Koushik

    hi Feiyun,
    below is the code(highlighted in bold)and after coming out of the function module i am getting popup and also the drop down values are missing.
    DATA: ls_control         TYPE zsfi_fiupload_control,
             ls_header          TYPE zsfi_fiupload_header_v13,
             ls_item            TYPE zsfi_fiupload_item_v13,
             ls_trailer         TYPE zsfi_fiupload_control,
             l_line_count       LIKE zsfi_fiupload_control-rec_count,
             l_current_curr     TYPE kcde_cells-value,
             l_current_postdate TYPE kcde_cells-value,
             l_current_compcode TYPE kcde_cells-value,
             l_currentrow       TYPE kcde_cells-row,
             l_filename         LIKE rlgrap-filename.
       DATA: BEGIN OF lt_intern OCCURS 0.
               INCLUDE STRUCTURE  kcde_cells.
       DATA: END OF lt_intern.
       DATA: BEGIN OF lt_items OCCURS 0,
               a TYPE kcde_cells-value,
               b TYPE kcde_cells-value,
               c TYPE kcde_cells-value,
               d TYPE kcde_cells-value,
               e TYPE kcde_cells-value,
               f TYPE kcde_cells-value,
               g TYPE kcde_cells-value,
               h TYPE kcde_cells-value,
               i TYPE kcde_cells-value,
               j TYPE kcde_cells-value,
               k TYPE kcde_cells-value,
               l TYPE kcde_cells-value,
               m TYPE kcde_cells-value,
               n TYPE kcde_cells-value,
               o TYPE kcde_cells-value,
               p TYPE kcde_cells-value,
               q TYPE kcde_cells-value,
               r TYPE kcde_cells-value,
               s TYPE kcde_cells-value,
               t TYPE kcde_cells-value,
               u TYPE kcde_cells-value,
               v TYPE kcde_cells-value,
               w TYPE kcde_cells-value,
               x TYPE kcde_cells-value,
               y TYPE kcde_cells-value,
               z TYPE kcde_cells-value,
               aa TYPE kcde_cells-value,
               ab TYPE kcde_cells-value,
               ac TYPE kcde_cells-value,
               ad TYPE kcde_cells-value,
               ae TYPE kcde_cells-value,
               af TYPE kcde_cells-value,
               ag TYPE kcde_cells-value,
               ah TYPE kcde_cells-value,
               ai TYPE kcde_cells-value,
               AJ TYPE KCDE_CELLS-VALUE,
               AK TYPE KCDE_CELLS-VALUE,
               END OF lt_items.
       l_filename = p_flpath.
    * the file must be an xls file, not xlsx or comma seperated
       IF p_flpath NS '.xls' AND p_flpath NS '.XLS'.
         MESSAGE i261(zfi).
         g_error = 'X'.
         EXIT.
       ENDIF.
    * upload excel file to a generic table
       CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
         EXPORTING
           filename                = l_filename
           i_begin_col             = 1
           i_begin_row             = 1
           i_end_col               = 150
           i_end_row               = 65000
         TABLES
           intern                  = lt_intern
         EXCEPTIONS
           inconsistent_parameters = 1
           upload_ole              = 2
           OTHERS                  = 3.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    * validate that the format is in the restatement format
    *  this is the only template to have the ledger group in cell G-2
    **  READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
    **  IF sy-subrc <> 0 OR lt_intern-value IS INITIAL.
    **    MESSAGE i260(zfi).
    **    g_error = 'X'.
    **    EXIT.
    **  ENDIF.
    * create control record values
       ls_control-rec_type = 'C'.
       ls_control-global_id = 'GLU-03000'.
       ls_control-local_id = ''.
       ls_control-rec_count = ''.
       CONCATENATE sy-datum sy-uzeit INTO ls_control-date.
       ls_control-version = '12'.
       ls_control-email = ''.
       ls_control-eor = 'X'.
       ls_trailer = ls_control.
    * open output file and add the control record
       OPEN DATASET p_unixfilename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
       TRANSFER ls_control TO p_unixfilename.
    * create header record values, will be transfered to file in the item loop
       ls_header-rec_type = 'H'.
       READ TABLE lt_intern WITH KEY row = '0017' col = '0003'.
       IF sy-subrc = 0.
         ls_header-header_txt = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH key row = '0020' col = '0002'.
       IF sy-subrc = 0.
         ls_header-comp_code = lt_intern-value.
       ENDIF.
    ************doc date
       READ TABLE lt_intern WITH KEY row = '0011' col = '0003'.
       IF sy-subrc = 0.
         ls_header-pstng_date = lt_intern-value.
       ENDIF.
    ************posting date
         ls_header-doc_date = sy-datum.
       READ TABLE lt_intern WITH KEY row = '0009' col = '0003'.
       IF sy-subrc = 0.
         ls_header-doc_type = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH KEY row = '0014' col = '0003'.
       IF sy-subrc = 0.
         ls_header-ref_doc_no = lt_intern-value.
       ENDIF.
    ************currency moved to line items
         READ TABLE lt_intern WITH KEY row = '0020' col = '0001'.
       IF sy-subrc = 0.
       ls_header-currency = lt_intern-value.
       ENDIF.
       ls_header-trans_date = ''.
       READ TABLE lt_intern WITH KEY row = '0010' col = '0003'.
       IF sy-subrc = 0.
         ls_header-period = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH KEY row = '0006' col = '0003'.
       IF sy-subrc = 0.
         ls_header-reason_rev = lt_intern-value.
       ENDIF.
       READ TABLE lt_intern WITH KEY row = '0007' col = '0003'.
       IF sy-subrc = 0.
         ls_header-rev_date = lt_intern-value.
       ENDIF.
    *  READ TABLE lt_intern WITH KEY row = '0002' col = '0007'.
    *  IF sy-subrc = 0.
         ls_header-ledger_grp = ''.
    *  ENDIF.
    *  READ TABLE lt_intern WITH KEY row = '0013' col = '0013'.
    *  IF sy-subrc = 0.
         ls_header-exch_rate = ''.
    *  ENDIF.
       READ TABLE lt_intern WITH KEY row = '0008' col = '0003'.
       IF sy-subrc = 0.
         ls_header-calc_tax = lt_intern-value.
       ENDIF.
       ls_header-eor = 'X'.
    * loop at the line items and append them to a table with multiple columns
       LOOP AT lt_intern WHERE row GE 20.
         IF l_currentrow <> lt_intern-row AND l_currentrow IS NOT INITIAL.
           APPEND lt_items.
           CLEAR lt_items.
         ENDIF.
         l_currentrow = lt_intern-row.
         CASE lt_intern-col.
           WHEN '0001'. lt_items-a = lt_intern-value.
           WHEN '0002'. lt_items-b = lt_intern-value.
           WHEN '0003'. lt_items-c = lt_intern-value.
           WHEN '0004'. lt_items-d = lt_intern-value.
           WHEN '0005'. lt_items-e = lt_intern-value.
           WHEN '0006'. lt_items-f = lt_intern-value.
           WHEN '0007'. lt_items-g = lt_intern-value.
           WHEN '0008'. lt_items-h = lt_intern-value.
           WHEN '0009'. lt_items-i = lt_intern-value.
           WHEN '0010'. lt_items-j = lt_intern-value.
           WHEN '0011'. lt_items-k = lt_intern-value.
           WHEN '0012'. lt_items-l = lt_intern-value.
           WHEN '0013'. lt_items-m = lt_intern-value.
           WHEN '0014'. lt_items-n = lt_intern-value.
           WHEN '0015'. lt_items-o = lt_intern-value.
           WHEN '0016'. lt_items-p = lt_intern-value.
           WHEN '0017'. lt_items-q = lt_intern-value.
           WHEN '0018'. lt_items-r = lt_intern-value.
           WHEN '0019'. lt_items-s = lt_intern-value.
           WHEN '0020'. lt_items-t = lt_intern-value.
           WHEN '0021'. lt_items-u = lt_intern-value.
           WHEN '0022'. lt_items-v = lt_intern-value.
           WHEN '0023'. lt_items-w = lt_intern-value.
           WHEN '0024'. lt_items-x = lt_intern-value.
           WHEN '0025'. lt_items-y = lt_intern-value.
           WHEN '0026'. lt_items-z = lt_intern-value.
           WHEN '0027'. lt_items-aa = lt_intern-value.
           WHEN '0028'. lt_items-ab = lt_intern-value.
           WHEN '0029'. lt_items-ac = lt_intern-value.
           WHEN '0030'. lt_items-ad = lt_intern-value.
           WHEN '0031'. lt_items-ae = lt_intern-value.
           WHEN '0032'. lt_items-af = lt_intern-value.
           WHEN '0033'. lt_items-ag = lt_intern-value.
           WHEN '0034'. lt_items-ah = lt_intern-value.
           WHEN '0035'. lt_items-ai = lt_intern-value.
           when '0036'. lt_items-aj = lt_intern-value.
           when '0037'. lt_items-ak = lt_intern-value.
         ENDCASE.
       ENDLOOP.
       APPEND lt_items.
    * sort rows by the post date, comp code, curr.
    *  SORT lt_items BY ah a ai.
    * loop at the items, creating a header record if the comp code, curr. or post date changes
       LOOP AT lt_items.
         ls_item-rec_type = 'I'.
         ls_item-post_key = lt_items-c.   "lt_items-b.
         IF lt_items-c GE '20' AND lt_items-c LE '39'.
           ls_item-vendor_no = lt_items-d.
         ELSEIF lt_items-c GE '0' AND lt_items-c LE '19'.
           ls_item-customer = lt_items-d.
         ELSEIF lt_items-c EQ '70' AND lt_items-c EQ '75'.
           ls_item-asset = lt_items-d.
         ELSE.
           ls_item-gl_account = lt_items-d.
         ENDIF.
         ls_item-asset_type = lt_items-m. "lt_items-l.
         ls_item-trans_type = lt_items-n. "lt_items-m.
         ls_item-print_flag = ''.
         ls_item-item_text = lt_items-j. "lt_items-i.
         ls_item-comp_code = lt_items-b. "lt_items-a.
         ls_item-bus_area = ''.
         ls_item-alloc_nmbr = lt_items-l. "lt_items-k.
         ls_item-tax_code = lt_items-q. "lt_items-p.
         ls_item-taxjurcode = lt_items-r. "lt_items-q.
         ls_item-profit_ctr = lt_items-g. "lt_items-f.
         ls_item-costcenter = lt_items-h. "lt_items-g.
         ls_item-orderid = lt_items-ac. "lt_items-ab.
         ls_item-wbs = lt_items-i. "lt_items-h.
         ls_item-trade_id = lt_items-o. "lt_items-n.
         ls_item-part_prctr = lt_items-p. "lt_items-o.
         ls_item-material = lt_items-t. "lt_items-s.
         ls_item-salesorg = lt_items-aa. "lt_items-z.
         ls_item-distr_chan = lt_items-ab. "lt_items-aa.
         ls_item-pmnttrms = ''.
         ls_item-pmtmthd = ''.
         ls_item-pmtmthsupl = ''.
         ls_item-alt_payee = ''.
         REPLACE ALL OCCURRENCES OF '(' IN lt_items-e WITH ''.
         REPLACE ALL OCCURRENCES OF ')' IN lt_items-e WITH ''.
         ls_item-amt_doccur = lt_items-e. "lt_items-d
         REPLACE ALL OCCURRENCES OF '(' IN lt_items-f WITH ''.
         REPLACE ALL OCCURRENCES OF ')' IN lt_items-f WITH ''.
         ls_item-loc_amt = lt_items-f. "lt_items-e
         ls_item-loc  = lt_items-k. "lt_items-j.
         ls_item-sas_revtype = lt_items-s. "lt_items-r.
         ls_item-rev_type = lt_items-u. "lt_items-t.
         ls_item-rev_chnl = lt_items-v. "lt_items-u.
         ls_item-bill_to = lt_items-x. "lt_items-w.
         ls_item-payer = lt_items-z. "lt_items-y.
         ls_item-ship_to = lt_items-y.
         ls_item-tax_amnt = lt_items-x.
         ls_item-func_area = ''.
         ls_item-expend_date = lt_items-ae. "lt_items-ad.
         ls_item-wtax_code = lt_items-af. "lt_items-ae.
         ls_item-wtax_base = lt_items-ag. "lt_items-af.
         ls_item-wtax_amount = lt_items-ah. "lt_items-ag.
         ls_item-payment_block = ''.
         ls_item-grp_amt = ''.
         ls_item-anc_amt = ''.
         ls_item-permit_payee = ''.
         ls_item-value_date = ''.
         ls_item-pernr   = ''.
         ls_item-legacy1 = ''.
         ls_item-legacy2 = ''.
         ls_item-legacy3 = ''.
         ls_item-legacy4 = ''.
         ls_item-legacy5 = ''.
         ls_item-legacy6 = ''.
         ls_item-legacy7 = ''.
         ls_item-legacy8 = ''.
         ls_item-legacy9 = ''.
         ls_item-legacy10 = ''.
         ls_item-eor = 'X'.
         TRANSLATE lt_items-ai TO UPPER CASE.
         TRANSLATE lt_items-b TO UPPER CASE.
         TRANSLATE lt_items-a TO UPPER CASE.
         TRANSLATE lt_items-aj TO UPPER CASE.
         IF l_current_curr <> lt_items-a "lt_items-ai
           OR l_current_postdate <> ls_header-pstng_date "lt_items-aj
           OR l_current_compcode <> lt_items-b.
           l_current_curr = lt_items-a.
           l_current_postdate = ls_header-pstng_date. "lt_items-aj.
           l_current_compcode = lt_items-b.
           ls_header-comp_code = l_current_compcode.
           ls_header-currency = l_current_curr.
           ls_header-pstng_date = l_current_postdate.
           ls_header-doc_date = l_current_postdate.
           TRANSFER ls_header TO p_unixfilename.
           l_line_count = l_line_count + 1.
         ENDIF.
         TRANSFER ls_item TO p_unixfilename.
         l_line_count = l_line_count + 1.
       ENDLOOP.
       ls_trailer-rec_type = 'T'.
       ls_trailer-rec_count = l_line_count.
       TRANSFER ls_trailer TO p_unixfilename.
       CLOSE DATASET p_unixfilename.
    * change the format to fixed format for the remainder of the load program
       p_fixed = 'X'.
       p_rstmnt = ''.
    Thanks,
    Koushik

  • Timeouts while using LDAP and TNSNAMES for names resolving

    I use an OID for Oracle Names resolving at the client-side.
    I tested some errorcases because there are no HA-features implemented for the OID.
    So i have an LDAP.ORA with the adress and the ports of the OID.
    My SQLNET.ORA has this content:
    NAMES.DEFAULT_DOMAIN = <my_company_domian>
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES)So actually there is no problem. But when i turn off the OID-Server there iss a timeout of about 20 second to resolve the name.
    So my problem is not the resolving. I only want to know if there is a possibility to minimize the timeout to switch between LDAP-name-resolving to tnsnames.ora-name-resolving?

    thanks Oviwan but i think this problem couldn't be solved with a parameter.
    @rgoogld:
    I already feared that i have to live with that timeout.
    But your options are interesting. In the future i will have 2 OIDs and in the first time the TNSNAMES.ORA-names-resolving as backup.
    I already can test this because i have a productive OID and one for test-purposes. So at the moment i have two OIDs listet in my LDAP.ORA.
    example:
    DIRECTORY_SERVERS = (<server_name_oid1>:<Port1>:<Port2>, <server_name_oid2>:<Port1>:<Port2>)
    DEFAULT_ADMIN_CONTEXT = ""
    DIRECTORY_SERVER_TYPE = OIDThere is already a (about 20 seconds) timeout, when the OID1 is powered down or the services are stopped. The client honestly ask the second OID after the "timeout" and resolve the name.
    2 OIDs+TNSNAMS or 1 OID+TNSNAMES in both cases your options could perhaps prevent the timeout. I'm not really a system administrator, but i can discuss it with my colleagues here.
    Do you know a smart way to remove or repoint an DNS-entry in a windows enviroment. For such actions i have also to monitor the status of the OID-services or the servers and make the dns-changes if something is crashed.
    At this moment i have no idea how to do this but perhaps you or someone else here have some tips for me.

  • Windows 10 Annoying sound while using

    There seems to be a crazy sound frequently appearing every minute on Windows 10, when installed on my Vaio. Anyone else having this issue?

    This delay is coming from your TACACS server.  Can you shorten the authentication failure there?  As for the user ID, check your System Identity User under Common Services > Server > Security > System Identity Setup.  Make sure this use exists in the TACACS databases.

  • I'm having an intermittent (yet increasingly frequent) problem. For whatever reason, I'm experiencing windows default system "beeps" while using Firefox. I have isolated this problem to Firefox, as it goes away when I'm not using it. Any thoughts?

    This problem *seems* to occur after using some java based products on Facebook.com but I haven't isolated it to just facebook, as I do have 6 tabs open on Firefox start-up.

    Hi. Thanks for the quick reply. Yes, it just started recently and after not being able to fix the problem, I completely reformatted my computer and started with a fresh slate, but still having the same problems. The videos will not continue to load. They get less than half way and then just totally stop loading, therefore I only get to view the video up to the point where it stops loading. I just took your advice and I disconnected the router and connected my computer directly to the modem and my sound issues were fixed. I went into the voice chat and had sound for over 10 minutes (and then I disconnected) instead of the usual 5 seconds that it'd been. So is it the linksys that is causing this? If so, how can I fix it? Thank-you. Message Edited by nightrider7000 on 01-22-2008 11:34 AM
    Message Edited by nightrider7000 on 01-22-2008 12:44 PM

  • Error while using the function module GUI_UPLOAD

    Hi,
    My requirement is to upload the data from .txt file into internal table.
    I have given my code like this
    PARAMETERS: p_fname LIKE rlgrap-filename.
    data: begin of gt_string occurs 0,
           record type char255,
          end of gt_string.
    AT SELECTION-SCREEN ON VALUE-REQUEST for p_fname.
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
        PROGRAM_NAME        = SYST-REPID
        DYNPRO_NUMBER       = SYST-DYNNR
        FIELD_NAME          = ' '
         STATIC              = 'X'
        MASK                = ' '
        CHANGING
          file_name           = p_fname
       EXCEPTIONS
         MASK_TOO_LONG       = 1
         OTHERS              = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename                      = p_fname
         FILETYPE                      = 'ASC'
         HAS_FIELD_SEPARATOR           = 'X'
         HEADER_LENGTH                 = 0
        READ_BY_LINE                  = 'X'
        DAT_MODE                      = ' '
        CODEPAGE                      = ' '
        IGNORE_CERR                   = ABAP_TRUE
        REPLACEMENT                   = '#'
        CHECK_BOM                     = ' '
        NO_AUTH_CHECK                 = ' '
      IMPORTING
        FILELENGTH                    =
        HEADER                        =
        tables
          data_tab                      = gt_string
       EXCEPTIONS
         FILE_OPEN_ERROR               = 1
         FILE_READ_ERROR               = 2
         NO_BATCH                      = 3
         GUI_REFUSE_FILETRANSFER       = 4
         INVALID_TYPE                  = 5
         NO_AUTHORITY                  = 6
         UNKNOWN_ERROR                 = 7
         BAD_DATA_FORMAT               = 8
         HEADER_NOT_ALLOWED            = 9
         SEPARATOR_NOT_ALLOWED         = 10
         HEADER_TOO_LONG               = 11
         UNKNOWN_DP_ERROR              = 12
         ACCESS_DENIED                 = 13
         DP_OUT_OF_MEMORY              = 14
         DISK_FULL                     = 15
         DP_TIMEOUT                    = 16
         OTHERS                        = 17
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Here I am getting dump error as 'Type conflict when calling a function module.
    The function module interface allows you to specify only fields
    of a particular type under "FILENAME". The field "P_FNAME" specified here has a different field type'.
    What would be the reason for this error?
    Can anyone help me?
    Regards,
    Hema

    see this sample program for F4 help
    *& Report  ZSD_EXCEL_INT_APP
    REPORT  ZSD_EXCEL_INT_APP.
    parameter: file_nm type localfile.
    types : begin of it_tab1,
            f1(20),
            f2(40),
            f3(20),
           end of it_tab1.
    data : it_tab type table of ALSMEX_TABLINE with header line,
           file type rlgrap-filename.
    data : it_tab2 type it_tab1 occurs 1,
           wa_tab2 type it_tab1,
           w_message(100)  TYPE c.
    at selection-screen on value-request for file_nm.
    CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      PROGRAM_NAME        = SYST-REPID
      DYNPRO_NUMBER       = SYST-DYNNR
      FIELD_NAME          = ' '
       STATIC              = 'X'
      MASK                = ' '
      CHANGING
       file_name           = file_nm
    EXCEPTIONS
       MASK_TOO_LONG       = 1
       OTHERS              = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    start-of-selection.
    refresh it_tab2[].clear wa_tab2.
    file = file_nm.
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
      EXPORTING
        filename                      = file
        i_begin_col                   = '1'
        i_begin_row                   =  '1'
        i_end_col                     = '10'
        i_end_row                     = '35'
      tables
        intern                        = it_tab
    EXCEPTIONS
       INCONSISTENT_PARAMETERS       = 1
       UPLOAD_OLE                    = 2
       OTHERS                        = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    loop at it_tab.
      case it_tab-col.
       when '002'.
        wa_tab2-f1 = it_tab-value.
       when '004'.
        wa_tab2-f2 = it_tab-value.
      when '008'.
        wa_tab2-f3 = it_tab-value.
    endcase.
    at end of row.
      append wa_tab2 to it_tab2.
    clear wa_tab2.
      endat.
    endloop.
    data : p_file TYPE  rlgrap-filename value 'TEST3.txt'.
    OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    *--- Display error messages if any.
      IF sy-subrc NE 0.
        MESSAGE e001(zsd_mes).
        EXIT.
      ELSE.
    *---Data is downloaded to the application server file path
        LOOP AT it_tab2 INTO wa_tab2.
          TRANSFER wa_tab2 TO p_file.
        ENDLOOP.
      ENDIF.
    *--Close the Application server file (Mandatory).
      CLOSE DATASET p_file.
    loop at it_tab2 into wa_tab2.
      write : / wa_tab2-f1,wa_tab2-f2,wa_tab2-f3.
    endloop.

  • Error while using Custom File Module..

    Hi Experts,
    I am trying to conver Excel file to xml file using XI , but i am getting this error in communication channel monitoring,
    error : com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at com.syed.FileModule3, the whole lookup name is localejbs/sap.com/com.syed.FileModule3/GetExcelFileBean2.
    how to solve this..
    Regards,
    Syed

    >
    Umar Syed wrote:
    > error : com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at com.syed.FileModule3, the whole lookup name is localejbs/sap.com/com.syed.FileModule3/GetExcelFileBean2.
    What is the JNDI name you had provided when you were developing the module?
    the JNDI name will be your module name. (it seems it is GetExcelFileBean2)
    Ref: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e

  • Drop down values are missing while using the function module KCD_EXCEL_OLE_TO_INT_CONVERT

    Hi all,
    I am using the function module "KCD_EXCEL_OLE_TO_INT_CONVERT"  to upload the excel template to an internal table but i am not getting the complete excel data into the table the fields which contains the drop down list values those values are not coming in to the table.
    Is there any other function module which can read even the drop down list values? can any one please provide me the solution.
    Thanks in advance
    ** FYI...i am using the below code:
    * upload excel file to a generic table
       CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
         EXPORTING
           filename                = l_filename
           i_begin_col             = 1
           i_begin_row             = 1
           i_end_col               = 150
           i_end_row               = 65000
         TABLES
           intern                  = lt_intern
         EXCEPTIONS
           inconsistent_parameters = 1
           upload_ole              = 2
           OTHERS                  = 3.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    Thanks,
    Koushik

    Hi all,
    I am using the function module "KCD_EXCEL_OLE_TO_INT_CONVERT"  to upload the excel template to an internal table but i am not getting the complete excel data into the table the fields which contains the drop down list values those values are not coming in to the table.
    Is there any other function module which can read even the drop down list values? can any one please provide me the solution.
    Thanks in advance
    ** FYI...i am using the below code:
    * upload excel file to a generic table
       CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
         EXPORTING
           filename                = l_filename
           i_begin_col             = 1
           i_begin_row             = 1
           i_end_col               = 150
           i_end_row               = 65000
         TABLES
           intern                  = lt_intern
         EXCEPTIONS
           inconsistent_parameters = 1
           upload_ole              = 2
           OTHERS                  = 3.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    Thanks,
    Koushik

  • Error while using RSDRI_INFOPROV_READ : parallel processing error

    Hi
    I am also facing parallel processing error while using the function module RSDRI_INFOPROV_READ in transformation.
    when only one data package is there, the load happens without any issue.  But when multiple data packages are involved the load fails with an error "Exception in parallel processing".

    Hi Lijo,
    I got the following information from the function module documentation of the FM RSDRI_INFOPROV_READ.
    If neither I_SAVE_IN_FILE nor I_SAVE_IN_TABLE are set, then the return takes place in the form of packages (that is an internal table), of value I_PACKAGESIZE. A negative value means that the return should be in one package.
    Prathish.

  • Problem while using CONVERT_TO_FOREIGN_CURRENCY

    Hi,
    I am facing an issue while using the function module CONVERT_TO_FOREIGN_CURRENCY.
    I am converting a value from EUR to USD. The type of rate that is passed to the FM is 'M'. However the functional module picks the exchange rate of rate type 'EURX' and performs the conversion.
    I also tried with FM CONVERT_TO_LOCAL_CURRENCY but still the results are consistent.
    Can anyone help me sort out what the issue is and how to resolve the same.
    Thanks.
    Regards,
    Senthil G.

    If the following FMs
    FWOS_CURRENCY_DECIMALS_READ
    CONVERT_TO_LOCAL_CURRENCY
    are not working then
    These FMs will help you ge exchange rate
    BAPI_EXCHANGERATE_GETDETAIL
    READ_EXCHANGE_RATE
    Once you get the exchange rate, multiply the source currency with it and get the target currency.
    Regards,
    Prashant

  • Socket timeouts while downloading huge amount of mails..................

    Problem Statement:
    I have created a utility(using JavaMail API) which downloads mails from the Exchange Server 2003(MS Windows server 2003) using IMAP service.
    The utility uses 5 different threads(each creating it's own separate IMAP session) to download the mails from the same user mailbox account. A separate main controlling thread has been used, which feeds these 5 threads with the start-end message counts with a batching of 100 messages. The 5 threads also set the message delete flag after downloading/processing the messages. And finally the main controlling thread expunges the mail box account after a certain amount of time(1 hour). (The service also takes care of expunging the messages at the startup as well.)
    The utility runs fine for a long time(say 8 to 10 hours) but then it suddenly starts giving socket timeout exceptions and then it continues giving the exceptions. I even introduced a delay of 15 min. and increased the socket timeout period but to no avail. All i had to do was to restart the exchange server and after some time, i again started the utility and it worked finely.
    Exception stack trace:
    * BYE JavaMail Exception: java.net.SocketTimeoutException: Read timed out
    javax.mail.MessagingException: * BYE JavaMail Exception: java.net.SocketTimeoutException: Read timed out;
    nested exception is:
    com.sun.mail.iap.ConnectionException: * BYE JavaMail Exception: java.net.SocketTimeoutException: Read timed out
    at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:477)
    at javax.mail.Service.connect(Service.java:275)
    at com.newgen.omni.mail.mswrapper.MailServerWrapper.connect(MailServerWrapper.java:102)
    at com.newgen.omni.mail.mswrapper.MailServerWrapper.<init>(MailServerWrapper.java:33)
    at com.newgen.omni.mail.scheduler.Scheduler.Process(Scheduler.java:352)
    at com.newgen.omni.mail.scheduler.Scheduler.run(Scheduler.java:293)
    at com.newgen.omni.mail.scheduler.Scheduler.execute(Scheduler.java:1026)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
    Caused by: com.sun.mail.iap.ConnectionException: * BYE JavaMail Exception: java.net.SocketTimeoutException: Read timed out
    at com.sun.mail.iap.Protocol.handleResult(Protocol.java:299)
    at com.sun.mail.iap.Protocol.simpleCommand(Protocol.java:316)
    at com.sun.mail.imap.protocol.IMAPProtocol.login(IMAPProtocol.java:290)
    at com.sun.mail.imap.IMAPStore.login(IMAPStore.java:517)
    at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:458)
    ... 8 more
    The code snippet to make the IMAP connection (all the 6 threads call it separately to create separate sessions):
    Properties prop = new Properties();
    logger.debugMsg("mailCapture :: Process :: Initializing IMAP context...");
    prop.put("mail.imap.appendbuffersize","-1");
    prop.put("mail.imap.allowreadonlyselect","true");
    prop.put("mail.imap.separatestoreconnection","true");
    prop.put("mail.imap.partialfetch","false");
    prop.put("mail.imap.connectiontimeout", "1200000");
    prop.put("mail.imap.timeout", "1200000");
    session = Session.getInstance(prop);
    //session.setDebug(true);
    logger.debugMsg("mailCapture :: Process :: Get Store...");
    store = session.getStore("imap");
    try
    store.connect(mailServerInfo.strServerIP, Integer.parseInt(mailServerInfo.strServerPort), mailServerInfo.strUsername, mailServerInfo.strPassword);
    catch(MessagingException ex)
    logger.logException(ex.getMessage(), ex);
    Thread.sleep(900000);
    throw ex;
    I have tried with session debugging as well when the exceptions started coming(restart the service with session debugging true) but it doesnt give me any information worthwhile, either the utility stucks on the store.connect or otherwise if it connects then it stucks while opening the folder while using (sourceMailAccountFolder.open(Folder.READ_WRITE);) and doesn't move any further.
    NOTE: While the IMAP service is throwing socket time out exceptions, at the same time I am able to access my account using the http://<ip>/exchange/administrator and the server machine cpu and memory usages are very low as well. I am also having a separte utility which uploads mails using smtp and it is also working fine and uploading the mails whilest the imap utility is throwing the socket timeout exceptions.......
    Please help on this as i am not able to resolve it myself.....................

    Can simultaneously uploading the mails through smtp affect the imap performance(and hence the javamail).
    Note: The mailbox size is over 200000 mails when it started giving exceptions.
    When the socket timeout exceptions came(i have experienced them for the last three days), i was still able to send mails using smtp and the telnet also working fine and even without any delays, infact as i said, the utility sometimes connects but then fails, while using sourceMailAccountFolder.open(Folder.READ_WRITE); giving socket timeout errors and then dnt go any further.
    Right now i have stopped the smtp uploading the mails(for the first time) but still the javamail takes a long time(variable) to connect to the server and the mail body and attachment accessing speed is also a little slow, will see and post back, if the socket timeout exceptions come again.
    Note: My aim is to download more than some 250000 mails within a day through javamail, whilest i am simultaneously uploading them using SMTP.
    My other survice, using SMTP pumps in messages within a loop.

  • Client-Auth reports: HTTP4030: Timeout while waiting for client certificate

    Hello,
    I'm having problems with the certificate authentication in my Sun Java System Web Server Enterprise Edition 6.1: I have created an ACL in the SJWS that asks for a client certificate when the user goes to a specific URI:
    acl "uri=/server1/myaction.do";
    authenticate (user) {
    method="ssl";
    deny (all)
    user = "admin";
    It works great and, when the user goes to "/server1/myaction.do" (we are using Internet Explorer 7 as Web browser), the window for selecting the client certificate appears:
    - If the user selects a certificate that doesn't require password, everything works fine.
    - The problem comes when the certificate is configured in Internet Explorer for asking for a password every time it is accessed. Once the user has selected the password protected certificate, the window for typing the password appears, but if the user doesn't type it and click OK IN LESS THAN 5 SECONDS (I've timed it), the following messages appear in the SJWS logs:
    [28/Nov/2007:09:25:05] failure ( 2055): for host 10.0.145.11 trying to GET /server1/myaction.do, Client-Auth reports: HTTP4030: Timeout while waiting for client certificate.
    [28/Nov/2007:09:25:05] security ( 2055): HTTP4290: get_auth_user_ssl: client passed no certificate.
    I tried to add the following two lines to the magnus.conf file of the SJWS, but nothing changed:
    SSLClientAuthTimeout 240
    AcceptTimeout 3600
    Has anyone experienced something similar? Any little piece of advice would be greatly appreciated.
    Thank you very much in advance,
    Carlos.

    This is fixed in Web Server 7.0 update 2. Please migrate/upgrade to Web Server 7.0 update 2. Sorry for the inconvenience.

  • How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

    Hi my name is vishal
    For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
    Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using System.Data.SqlClient;
    using iTextSharp.text;
    using iTextSharp.text.pdf;
    using System.Diagnostics;
    using System.IO;
    namespace DRRS_CSharp
    public partial class frmPDF : Form
    public frmPDF()
    InitializeComponent();
    private void button1_Click(object sender, EventArgs e)
    Document doc = new Document(PageSize.A4.Rotate());
    var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    doc.SetMargins(50, 50, 50, 50);
    doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
    doc.Open();
    PdfPTable table = new PdfPTable(6);
    table.TotalWidth =530f;
    table.LockedWidth = true;
    PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
    cell.Colspan = 6;
    cell.HorizontalAlignment = 0;
    table.AddCell(cell);
    Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
    para.Alignment = Element.ALIGN_CENTER;
    iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
    png.ScaleToFit(105f, 105f);
    png.Alignment = Element.ALIGN_RIGHT;
    SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
    SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
    conn.Open();
    SqlDataReader dr;
    dr = cmd.ExecuteReader();
    table.AddCell("Reprocessing Date");
    table.AddCell("Patient Name");
    table.AddCell("Dialyzer(Manufacturer,Size)");
    table.AddCell("No.of Reuse");
    table.AddCell("Verification");
    table.AddCell("DialyzerID");
    while (dr.Read())
    table.AddCell(dr[2].ToString());
    table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
    table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
    table.AddCell("@count".ToString());
    table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
    table.AddCell(dr[0].ToString());
    dr.Close();
    table.SpacingBefore = 15f;
    doc.Add(para);
    doc.Add(png);
    doc.Add(table);
    doc.Close();
    System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
    if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
    var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
    this.Close();
    The above code executes well with no problem at all!
    As you can see the file to which i create and save and open my pdf report is
    AssignedDialyzer.pdf.
    The column headers of table in pdf report from c# windows forms using iTextSharp are
    "Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
    "DialyzerID".
    However the problem i am facing is after execution and opening of document is my
    column headers in table in pdf report from
    c# and datas in it all appear in bold.
    I have browsed through net regarding to solve this problem but with no success.
    What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
    Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
    I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
    Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
    If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
    vb6,adodb with ms access using iTextSharp?
    I have approached Sound Forge.Net for help but with no success.
    I hope anyone/someone truly understands what i am trying to ask!
    I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
    Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
    I hope i get a reply in terms of solving this problem.
    vishal

    Hi,
    About iTextSharp component issue , I think this case is off-topic in here.
    I suggest you consulting to compenent provider.
    http://sourceforge.net/projects/itextsharp/
    Regards,
    Marvin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for