LO Cockpit Load - 2lis_03_BF and 2LIS_03_UM - some dups in 1st delta pull

Hello,
I am wondering if I might have done something incorrectly. I am new to lo cockpit and had to create a custom datastore. I did the steps below and then ran deltas from that point on. Only the first delta pull after my initial load had duplicates in it (about 2000 out of 8749 records for BF datasource). The delta job was scheduled hourly.
Any insight would be greatly appreciated.
Lynda
Steps for Loading Raw Materials from ECC to BW - 3/25/2009
1.     ECC/SRM/BW u2013 lock out users u2013 6 pm
2.     ECC - delete 03 setup tables u2013 SBIW
3.     ECC - insure all delta queues do not contain anything for 2lis_03_BF or 2LIS_03_UM
               (rsa7, SMQ1, LBWQ)
4.     ECC - Stop V3 jobs for inventory u2013 SM37 u2013 if any exist
5.     ECC u2013 fill setup tables u2013 SBIW for material movements and revaluations
                 (1085, 1101, 1103, 1104, 1200, and 1201 company codes )
6.     ECC u2013 SM37 u2013 check for RMCBNEUA (MSEG) pull and RMCBNERP (BSEG pulls)
                for successful completion
7.     BW - Run Init W/out data transfer u2013 sets delta pointer
8.     BW - Run Full Repair for 2lis_03_bf and 2lis_03_um datasources to ZGDMVTIM
9.             Run deltas - got 0 records
10.     ECC u2013 schedule V3 jobs using LBWE
11.     Unlock Users
on 3/27/2009 - first real delta pull occurred . Out of 8749 BF records, 2000 were duplicates. Did it have anything to do with the full repair?

closing this question - opened up another similar question.

Similar Messages

Linking 2lis_03_bf and 2lis_03_um

Hello Experts,
I need an inventory report with following details in BW
Material doc (mseg-mblnr), Movement Type (mseg-bwart), material (mseg-matnr), valuated stock, blocked stock, quality hold, value of stock (Bseg-dbmtr).
I have installed standard infocube 0ic_c03 and it contains only higher level detail of material, plant, storage location, stocktype, stock catogery,vendor and batch.
So I am planning to add 0doc_num and movement type to the cube. when I am checking the business content delivered tranfer rules for 2lis_03_bf 0doc_num is mapped to mblnr, and in 2lis_03_um 0doc_num is mapped with belnr.
When I am checking in R/3 mseg-mbler is having only documents starting with 4 and bseg-belnr is having only documents starting with 3.
I am very confused can anyone give me the link between mseg and bseg?
Please help me it is very very urgent, i am bound to reward points
Thanks,
Sri

Hi,
I am sorry for the confusion, I was missing basic point that 2lis_03_bf and 2lis_03_um are based on same communication structure mcmseg, does mblnr in 2lis_03_bf have same value as belnr in 2lis_03_um?
Can some one please give the link between 2lis_03_bf and 2lis_03_um?
Thanks,
Sri

2lis_03_bf and 2lis_03_um Reinitialization precautions?

hi experts,
My client is Using 0IC_C03 Inventory Cube since December 2009. they have generated Opening balance at that time and initialized the 2lis_03_bf and 2lis_03_um data sources and doing deltas.
but the problem is that they have deleted the Init requests from the Target cube and they wanted to analyze the data from Day 1 which is December 2009. so client wanted to delete the complete data from cube and reinitialization has to be done.
My questions are
1          is do i need to Generate the Opening Balance again for 2lis_03_bx??? or not required? if required what are the Selection Criteria i have give while filling setup tables in MCNB TCODE.
2          2lis_03_bf reinitialization Steps like i will extract the Initialize with Data transfer, what are the steps i need to perform after DTP Extraction into 0IC_C03 cube? tell me exactly how to take care of Marker Update.
3         2lis_03_UM reinitialization Steps like i will extract the Initialize with Data transfer, what are the steps i need to perform after DTP Extraction into 0IC_C03 cube?
please give ur inputs..
regards
venuscm

Hi Sachin,
Thanks for very useful information regarding Initialization.
2lis_03_bx - ECC SIDE - Do we need to select the Transfer Structure (2lis_03_bx) as well in MCNB and which Radio Buttons i have to select (only valuated stocks, All Stocks (Including non_valut), and what about Zero stock to be transferred do i need to select ?), and what about Time of termination how much i have to give??
for example - i am filling up setup tables on 01-10-2010 at 10.00.00 how much time i have to give at Time of Termination??
BW SIDE - Client has generated the Opening Balance, but when i look at the PSA Data it shows that no Data, but requests are
there.
Just now i tried in Quality System - There are 30596 records in RSA3, and after DTP extraction in the Cube there are about 50000 records and there are routines in the Transformations?? will it any problem??
2lis_03_bf - ECC Side - How Much Time can i give if i am filling up setup tables on 01-10-2010 at 10.00.00 how much time i have to give at Time of Termination?? AND can i fill the setup tables paralally (MCNB,OLI1BW,OLIZBW) ???
BW SIDE - Once i have extracted the Data by initialization with data transfer and DTP to 0IC_C03 Cube, for next Delta Requests do i need to select the check Box (NO MARKER UPDATE)??
2lis_03_um ECC SIDE - regarding 2lis_03_um do we need to ask the Client for Company codes??? I think we cannot give range.How Much Time can i give if i am filling up setup tables on 01-10-2010 at 10.00.00 how much time i have to give at Time of Termination??
BW SIDE - Once i have extracted the Data by initialization with data transfer and DTP to 0IC_C03 Cube, for next Delta Requests do i need to select the check Box (NO MARKER UPDATE)??
Please specify clearly.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 30, 2010 10:15 AM

What is the link between 2lis_03_bf,2lis_03_bx and 2lis_03_uM

HI,
what is the link between 2lis_03_bf,2lis_03_bx and 2lis_03_uM.is these datasources to be loaded in the order.can anybody explain me

Hi
These three datasources are related to inventory. BF is for opening stock, BX is for material movements and UM is valuations. Before loading this data into BW you need to maintain some settings in R/3 side.
According to SAP NOTE:315880.T-code BF11.Activate the flag NDI will reflect in table "TBE11" For the entry "NDI".
2. set the application indicator 'BW' to active using Transaction 'BF11' . which will make tick mark(x) for the field AKTIV for the APPLK ='BW' in table TBE11.
3. Activate the PROCESSKEY under "Maintain Industry Sector"
4. Generated "STOCK INITIALIZATION" for 2LIS_03_BX.
5. Filled setup tables for "INVENTORY CONTROLLING"
6. Scheduled the InfoPackage for 2LIS_03_BX with update mode "GENERATE INITIAL STATUS.
then load BF and UM
There is a PDF available how to load inventory..just search for it in SDN.
REgards
Ram

My iPhone 4S will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

My iPhone will
not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?

Try resetting your network settings.
Settings>Genenal>Reset>Reset Network Settings.

I have multiple iPhoto libraries w/ duplicates in several. How can I consolidate and find the dupes? Some photos are versions of the original.

I have multiple iPhoto libraries w/ duplicates in several. How can I consolidate and find the dupes? Some photos are versions of the original. On my iMac, I also have many folders containing some of the same photos. My computer is used for both personal and business purposes. My libraries should be separated, one for each.

To merge libraries use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - or Aperature
To find duplicates within an iPhoto library use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -
Photos that are not in an iPhoto library can be imported telling iPhoto not to import duplicates (an imperfect procews) and then IPLM can find the duplicates
As to keeping seperate libraries - only you can do that - IPLM can move photos between libraries for you but only you can know which photos should be in which library
LN

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how d

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how do I fix it?

You can't fix it. iTunes bought content is DRM protected. so it can only be played on authorized devices. i.e devices associated with the apple Id used to purchase the content. Its copyright protection that the rights owners demand.
Circumventing it, is illegal in most countries, and as such cannot be discussed here. If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

TS1702 ?Some of my applications have been saying I need the latest version of Adoebe Flash Player. When I try to download it I get the following error message: 'Frame Load interrupted' and the installation stops. Any suggestions

Some of my applications have been saying I need the latest version of Adoebe Flash Player. When I try to download it I get the following error message: 'Frame Load interrupted' and the installation stops. Any suggestions?

You can only use apps downloaded from the App store, not via a browser. There is no Flash for any iOS device including the iPod.

TS3408 why will some websites which loaded fine before now not load - when other favourites load fine, and new searches are fine? This only affects 2 websites, both of which were bookmarked. I have removed them as bookmarks and this makes no difference.

why will some websites which loaded fine before now not load - when other favourites load fine, and new searches are fine? This only affects 2 websites, both of which were bookmarked. I have removed them as bookmarks and this makes no difference.

From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. help!

was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. who can help?

Not easy if vital information is missing. Sometimes it seems like people are using the internet the first time...
What version of Indesign?
What OS? "Rights" sounds like Windows
What is happening when starting it?
If Windows, where was it installed?
If Windows, do you have admin permissions?

I am having problems with my droid incredible 2 loading texts and so I thought maybe I had too many saved, I tried to delete some of them and it wont seem to delete either?

I am having problems with my droid incredible 2 loading texts and so I thought maybe I had too many saved, I tried to delete some of them and it wont seem to delete either?

Did you pull the battery?

Apr 22, 2011 6:28 PM I've had my iPhone 4 for about 4 months now, and suddenly some apps aren't working. They open and appear to work, but as soon as you try to do something it doesn't load. I tried deleting the app and reinstalling it. I also force shut

Apr 22, 2011 6:28 PM
I've had my iPhone 4 for about 4 months now, and suddenly some apps aren't working. They open and appear to work, but as soon as you try to do something it doesn't load. I tried deleting the app and reinstalling it. I also force shut down my phone. I synced it to iTunes. Nothing is working. Does anyone know what I can do?

Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
You need to go through all steps in succession until your problem is solved. If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement.

Some websites load strange and hyperlinks are ineffective in Windows 7?

I have windows 7, which is a 64 bit system? I have discovered that Firefox is still operating in 32 bits for the time being. Would that explain why certain pages load strange and certain links are unresponsive? Things seem to be working fine with explorer, but I really like Firefox.
== This happened ==
Every time Firefox opened
== New Update? ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; OfficeLiveConnector.1.3; OfficeLivePatch.0.0)

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Missing some master data for delta load( its very urgent please)

Hi,
I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
Address Number/ Addr Ln 1 Txt/ City Dstrct Nm
9025750333/ #/ #
help me its very urgent

Hi Sumanth,
check the delta queue and the V3 job is it running correctly ,
Have a look at OSS note :728687
and also see the following thread
Deltas are not available in Delta que
Delta Queues are not cleared in R/3
No data in RSA7 for 2lis_03_bf : HELP
check the data may b it is in modifide status not active.
regards,
supriya

Problems loading 2LIS_03_BF

Problems when loading Material Movements
In 3.0B release I am having problems when trying to load data into standard cube 0IC_C03.
I followed the "how to handle IM scenarios" document in order to fill the cube.
I load the initial stock correctly using 2LIS_03_BX.
Then I compress the request and tried to load 2LIS_03_BF. It selects data load correctly into BW but then it doesn't insert any data into cube.
To extract data I am using the V3 unserialized.
Regards
Ignacio Olivera

Hi,
So you mean, data from R/3 reaches BW PSA? So the problem is from PSA to the CUBE? Am I correct? Please further answer my questions:
1.) Was there any successful data transfer from PSA to CUBE before? If NONE, check your Transfer RULES, it could be deleting data for some conditions. If YES, what was recently changed that caused the problem to occur? Its not logical that it suddenly stops receiving data, am I right?
2.) Are there any errors that occured in the process?
Try to change your settings in the INFO PACKAGE. Under PROCESSING TAB use the option "Data Targets Only" just to bypass PSA and lets see what will happen.
--Jkyle

LO Cockpit Load - 2lis_03_BF and 2LIS_03_UM - some dups in 1st delta pull

Similar Messages

Maybe you are looking for