Load balancing v/s Clustering with BOXI enterprise premium

We are planning to install Businessobjects enterprise premium on windows2008 server (64 bit) and we are going to use oracle database. my question is
"Can we set up Crystal reports and businessobjects (web intelligence) both either on clustered environment or load balancer ? "
If not, can you please let me know what is the best option ?

Oh. All BOE (this includes Crystal) servers support clustering (and software load balancing via corba). Only the input and output FRS do not support load balancing. i.e. while you can have mulitple input/output FRS, only one of each is active at a time. The others are passive and will only be used if the active FRS is unavailable.
As an aside, if I remember correctly, a BOE Premium license is required for clustering.
So, in essence, you do not need a hardware load balancer to support load balancing for both Crystal and Webi.

Similar Messages

Oracle Applications 11i Load Balancing does not work with RAC one Node

Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
Moussa

This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

Load balancing Reports Services 10g with WebCache?

Hi Guys
Does anybody have any good ideas on how to load balance Oracle Reports Services?
Can I do it with WebCache as with Forms Services?
/Jacob :)

My java application resides in a different server (weblogic) from the Oracle Application server (which has the report server). I do a browser redirect from my java application to a URL of OAS . I have hard coded Oracle Application server and report server name in one of my config files in my java weblogic server
In the above URL, servername:7770 is the Oracle Application Server. I would not have a problem with this since this will be the name of the cluster.
But the problem is server=<report server> . The report server which will pickup my request will be identified only after the browser has redirected to the URL. SO I cannot hard code it in my ajava application.
Can I just remove server=<report server name> when generating URL from my java application when I need to run report server in a clustered load balancing environment?
Sorry if my earlier post was confusing

Load balancing on an applicaton with multi-ports

One of our application open 5 ports and other 4 management ports. the ports can not be ranged.
to load balancing this, I did:
make seperate contents rules for every port. and all of them use aca.
Please advice me :
1. how can I group all the ports into one contents rule?
2. every rule for a port means the balancing in only by based on specialy port?
3. Can I balance the load between ports?
4. for administrator ports, what is the better balancing mothed?
Any comments will be apprecaited
Thanks in advance

Gilles,
What will be the best keepalive on the services to use in this case?
I have had a problem where I tried the same setup you have suggested above but what happen is i get a black hole if the service port(s) goes down on one of the servers.
At the beginning, I used the default ICMP keepalive and then tried the port xx keepalive but because the servers have multiple ports and if the port that is not monitored by keepalive goes down, the content rule still think that the service is still up and this is where I get i blackhole. To get around with the problem I have created multiple services, (one for each port) and configured the subsequent keepalive.
1. is there a better way of doing it? i,e script
2. is there any documentation on Cisco website on how to use the scripting tools on CSS?
Thanks again,
Ben

App.server load balancing for SAP System with 1 PS

Hi,
In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer.
After activating the "App.server load balancing" setting in SAP system definition the application servers are becoming visible in CPS with their load factors (number of BGD wp's on app.servers) and load numbers (number of active jobs on app.servers).
This is so far fine, but the additional functionality is not working as I would expect, I have issues with 2 functionalities:
1. Based on documentation after activating also the XAL connection the CPS should submit the job on app.server with best performance based on XAL monitoring data filling the TARGET_SERVER parameter.
This functionality is not working for me at all
2. A useful functionality after activating the "App.server load balancing" setting is that the ProcessServer is going to "Overloaded" status when all BGD wp's of SAP system are occupied, thus restricting submitting new jobs during overload situation. But I had an issue also with this functionality, after SAP system recovery from overload situation, the CPS still remained in Overload status (so no new jobs were submitted).
As a workaround I had increased the treshold values for loads on all app.servers for this SAP system, what was fine for several days, but after a while I believe this was a reason of unexpected performance issues in CPS, therefore I have deactivated the 'App.server load balancing" setting at all for this ProcessServer.
I would appreciate your feedbacks with this functionality.
Thanks and Regards,
Ernest Liczki

Hi Preetish,
This connect string option is to loadbalance RFC connections. These are balanced upon login, once you are connected to a particular application server (AS) you stay on that server until you reconnect.
Since CPS uses multiple RFC connections, this will result in the connections being distributed over the available AS resources which is fine as long as they are generally evenly loaded. If you have certain AS hosts that are continuosly more loaded than the rest, then you probably don't want the CPS RFC connections to end up on these servers.
The original question is about loadbalancing of batch jobs over the available AS resources, and this is done independent of the RFC connection load balancing. Even if all CPS RFC connections are pinned to the DB/CI host, you can still loadbalance jobs over the available SAP AS hosts, either by using SAPs builtin balancing, or the CPS algorithm by activating the checkbox as indicated in the first entry in this thread.
Finally, to reply to Ernest's question: I believe there are some fixes on the app load balancing in the latest release, M26.17 should be available on the SWDC now.
Regards,
Anton.
Edited by: Anton Goselink on May 29, 2009 9:06 PM

Sticky sessions and Load Balancing in WL Clusters

We are using iPlanet Web Server 4.1 with WebLogic App Server; and would like
to implement load balancing with sticky sessions and in-memory state
replication.
The documentation in Weblogic says that -
When using in-memory state replication, your WebLogic Server Cluster must
live behind one or more proxy servers. The proxy servers are smart enough to
send servlet requests, belonging to the same HTTP session, back to the same
server in the cluster that holds the session data.
(Ref: http://www.weblogic.com/docs51/cluster/setup.html)
Does this mean that the sticky session configuration has to be done on the
iPlanet Web Server itself ?
Also, if WebLogic is used as the Web server, does WebLogic provide any
support for sticky sessions?
Any help, suggestions or links to useful info are welcome.
Regards,
Milind.

Mike,
im curious as to why you would recomend using weblogic as a web server in 6.1?
I would not for the following reasons:
- it costs 10x more per cpu list
- it doesnt support hardware accell cards (afaik, please let me know if this has
changed)
iplanet is really good a serving up static html and gif's, especially in ssl if you
have a hardware accell card. So if you have a site with lots of graphics and you use
ssl a lot, I think its still a better solution.
-Joel
Mike Reiche wrote:
You get sticky round-robin by default.
You need to have session tracking turned on (i think it is on by default). You
need to have the WL plugin configured in iPlanet.
When WL creates an httpSession, it writes a cookie (or rewrites the URL) back
to the browser. On subsequent requests, the browser sends the cookie and iPlanet
plug-in directs the request to the correct WL instance based on the ip address
of the WL server embedded in the cookie.
If you are using WLS 6.1, I would recommend using it as a web server (and not
using iPlanet). I imagine that it supports stickly load balancing as well.
Mike
Joel Nylund <[email protected]> wrote:
you get round robin by default, if you want a different scheme you can
use one
of the other 3 options (weight, random or parameter).
-Joel
I think weight can be set in weblogic properties. I havent used any other
than
round robin.
Milind Prabhu wrote:
We are using iPlanet Web Server 4.1 with WebLogic App Server; and wouldlike
to implement load balancing with sticky sessions and in-memory state
replication.
The documentation in Weblogic says that -
When using in-memory state replication, your WebLogic Server Clustermust
live behind one or more proxy servers. The proxy servers are smartenough to
send servlet requests, belonging to the same HTTP session, back tothe same
server in the cluster that holds the session data.
(Ref: http://www.weblogic.com/docs51/cluster/setup.html)
Does this mean that the sticky session configuration has to be doneon the
iPlanet Web Server itself ?
Also, if WebLogic is used as the Web server, does WebLogic provideany
support for sticky sessions?
Any help, suggestions or links to useful info are welcome.
Regards,
Milind.

Load Balancing Forms and Reports with Web Cache

We are planning to add a second OracleAS 10g middle-tier application server to an existing 10g middle-tier.
Both middle tiers will provide Forms and Reports.
Users must pass through two static HTML pages before starting Forms.
We plan to use Web Cache to load-balance (probably using round-robin) between the two middle-tiers.
Does anyone see any problems with this solution?
All comments/suggestions welcome.
Thanks,
Jim

You could also load balance the two OC4J's using standard servlet mechanisms. I know that there exists a couple of good notes on Metalink. Go and do a search.
Regards,
Martin Malmstrom

Sticky load balancing across 2 ports with cookies

Hi,
I have a server configuration where I have 1 top level Apache server that deals with SSL termination (and handles static content) and proxy passes dynamic content onto 2 Tomcat servers on 2 ports, one for http requests (9001) and one for the requests that were secure, but have now been un-encrypted by Apache (9002). My 2 Tomcat servers are load balanced using a CSS and I need this load balancing to stick to the tomcat servers regardless of port so that the user is stuck to the same Tomcat server for their entire session.
I would like to use arrowpoint cookies to perform this stickyness, but the documentation suggests that arrowpoint cookie load balancing (in fact any cookie based load balancing) requires the port to be specified in the content rule. Is this correct? Is my only option to use the source IP for stickyness? I don't understand why the port should be required if the stickyness is via a cookie. Can I not simply configure my 2 tomcat servers as services with no port and add a single content rule that load balances these services using arrowpoint-cookie advanced balancing?
service tomcat1
ip address x.x.x.x
active
service tomcat2
ip address x.x.x.x
active
owner me
   content sticky
     vip address x.x.x.x
     protocol tcp
     url "/*"
     add service tomcat-1
     add service tomcat-2
     advanced-balance arrowpoint-cookie
     active

Angela-
The issue with port is that cookies are very specifically HTTP only and the CSS has no way of knowing what protocol will hit a VIP prior to trying to address it as HTTP. Your issue is actually a bit clearer than it is initially led to be - you can still use 2 different rules by using the configuration below.
However, you might be headed for a headache if you don't implicitly control the client's actions. By default, browsers don't generally send cookies cross-protocol and definitely not cross-domain. Use something like httpwatch or iewatch to check out the headers your client sends to your site. Make sure when the 200ok arrives with the set-cookie that the client sends that cookie in all preceeding packets that are HTTP and HTTPS both.
service tomcat1
string "tomcat1"
ip address x.x.x.x
active
service tomcat2
string "tomcat2"
ip address x.x.x.x
active
owner me
   content sticky9001
     vip address x.x.x.x
     protocol tcp
     url "/*"
     port 9001
     add service tomcat-1
     add service tomcat-2
     advanced-balance arrowpoint-cookie
     active
   content sticky9002
     vip address x.x.x.x
     protocol tcp
     url "/*"
     port 9002
     add service tomcat-1
     add service tomcat-2
     advanced-balance arrowpoint-cookie
     active
With this configuration, the CSS will use the "string" as the cookie value. So if the client were to recieve set-cookie: ArrowpointCookie=tomcat1, it should use it for either rule, and end up on tomcat1 accessing either VIP.
Regards,
Chris

Load balance configuration for clustering

we are going to setup multiple servers (clustering) for the BIEE. What configuration needs to be done to make them clustering? And, what is the load balancing alogrithmn behind? Pls help. thks.

Which articles & documentation have you read already? I don't want to duplicate what they've covered.
http://catb.org/~esr/faqs/smart-questions.html#beprecise

Load Balancing on a URL with parameters in it.

Hi,
We have two main Server Farms. I have been asked to load balance to each farm based on the url. The problem:
The url looks like this
https://www.domain.com/test/ci/?par1=Default&par2=main&userRole=userrole&mcId=companyname&par4=somethingelse
The bit of the url for the decision making is "mcId", but as I understand it, I cannot use a "?" in the url text string on the CSS. So, how do i do it ?
Many thanks
Wayne

Wayne,
the documentation is actually incorrect.
The '?' does not prevent the advanced-balance url feature to work.
It just changes where the CSS starts looking for the string.
Check this url for a sample config.
http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a0080409807.html#wp1115519
Regards,
Gilles.

Load balancing on rac database with single node appsTier

Hi,
Please advice me, I am working on to configure load balancing on appstier, following is my setup and steps I did so far.
Host name      Services
Clelx062ptlge --     Rac 1 – only database
Clelx063ptlge --     Rac 2 – only database
Clelx042ptlge --     All apps services including concurrent managers
I have two R12 database(UDEV -- development & HRQA -- UAT), I only made changes in apps tier xml file of udev for some load balancing parameters, following are the changes I did.
*<TWO_TASK oa_var="s_tools_twotask" osd="unix"> udev_806_BALANCE </TWO_TASK>*
*<CP_TWOTASK oa_var="s_cp_twotask" customized="yes">udev_806_BALANCE</CP_TWOTASK>*
*<TWO_TASK oa_var="s_weboh_twotask" osd="unix"> udev_BALANCE </TWO_TASK>*
I changed the values from "UDEV" to given above value. After the above change I ran autoconfig. Then Concurrent managers and forms services are not automatically getting failover to second database node, I need to bounce services to fail it back to other available Rac node. Please note that we have only one appsTier
Thanks,
Tanveer Mohammed.

Hi,
Yes, i have checked the doc referenced, and already did the steps given in the doc. Also i did all the steps given into ID 388577.1 but still Concurrent managers and forms services are not automatically getting failover to second database node, I need to bounce services to fail it back to other available Rac node.
Please advice...
Thanks,
Tanveer Mohammed.

Load-balancing inbound sftp connections with ACE

Hi,
Can anyone share experiences or any info relating to issues that might be encountered when load-balancing sftp protocol?
The goal is to distribute inbound file deposits evenly across SFTP servers.
High-level Overview
Clients -> Internet -> Tier-1 Firewall -> ACE Load-balancer -> SFTP Servers
Many Thanks

SFTP is nothing but SSH. It uses a single connection. There are no issues loadbalancing it using traditional Layer 4 load balancing.
So you are good.
On the other hand FTP over SSL (FTPS) can neither offloaded nor loadbalanced using ACE.
FTPS uses multiple channels and Since the control channel is encrypted, ACe is not able to get the port numbers for the data connections.
HTH
Syed Iftekhar Ahmed

Load balancing of PIX firewalls with multiple DMZs

I need a suggestion about how to balance the traffic through two PIX firewalls, with 4 interfaces (IN,OUT,DMZ1,DMZ2)
In all the documentation related to the subject, I see always the firewalls with only two interfaces:
http://www.cisco.com/warp/customer/117/fw_load_balancing.html
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/advcfggd/firewall.htm
What if I need to balance on more than 2 interfaces?
Do I have to add more content switches, one for each interface ?
Or could I use VLANs inside the same content switches, and assign the ports to DMZs appropriately ?
Thank you in advance for any help.

We just had some internal discussions about that at my work, and the suggestion from a local cisco specialist was, if you want to levarage load balacing over multiple DMZ's, then you get the CSS blades for the 65xx's. Right now we have mulriple CSS and LD failover pairs (One pair for each DMZ) and it is starting to become expensive, while we aren't really utilizing the full capacity of them. If you get the Blades, they have Gigabit traces to the backplane of the switch, and you can use them for as many poers as you have on the 6500.
Then again, it depends on if physical security is essential to you, and you are concerned with L2 attacks (VLAN Hopping, etc) There are tradeoffs and benefits when using a consildated infrastructure.

Load balance not working right with jdbc connection string?

For months we've used the following connection string to get Tomcat to open connections to our Oracle 10g RAC:
jdbc:oracle:thin:@(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST
= db1vip) (PORT = 1521)) (ADDRESS = (PROTOCOL = TCP) (HOST = db2vip)
(PORT = 1521)) (LOAD_BALANCE = yes) (CONNECT_DATA = (SERVER = DEDICATED)
(SERVICE_NAME = orcl) (PREFER_LEAST_LOADED_NODE_ORCL = OFF) ) )
Today, db2 became inaccessible during prime time, and the web app completely hung--when you tried to type in a username and password to log into the site, it would just hang indefinitely, and the Tomcat log files were complaining about being unable to open a connection to the database because of a network adapter error.
I would have expected the JDBC driver Tomcat was using to just switch to the other database server, but none of our Tomcat machines did that, and I'm wondering why (they all just hung trying to connect to db2). Our guess is that the difference this time is not that Oracle was down on db2, but that db2 was down entirely. Maybe that connection string works only if the server is up when the database is down, and not when the server is unreachable (we couldn't SSH to the box, and when we tried to get to it locally using a remote access card, a lot of options were grayed out and we couldn't see a shell, so all we could do was reset the box).

Hi,
Please refer to the link below:
SCOM 2012 – Monitoring Oracle Database OLE DB Management Pack Template
http://stefanroth.net/2012/12/05/scom-2012-monitoring-oracle-database-ole-db-management-pack-template/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Could not retrieve Enterprise Global Template - Load balancer issue

Hi,
We have 4 Project Server 2010 servers. The 4 web servers are load balanced by networking team with sticky session configured.
When we try to connect to the Project Server using MPP 2007 SP2, it fails saying 'Could not retrieve Enterprise Global template'. It works perfect when we point to a specific server by specifying the IP address for server name in the 'hosts'
file.
Earlier we observed some errors in the event viewer related to the SharePoint's internal load balancer for which restarted the 'Project Server Application' on each web server and it got fixed.
Now, the only entries that we see related to load balancer are as mentioned below as Information (not errors).
SharePoint Web Services Round Robin Service Load Balancer Event: Initialization
Process Name: w3wp
Process ID: 15080
AppDomain Name: /LM/W3SVC/539065287/ROOT-1-130462463500778047
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:ae7c7ee5c09b4e8198bdbb1ecb8c1c1b#authority=urn:uuid:9f626d347784423eb14bde4a1f4d13fc&authority=https://lonms12546:32844/Topology/topology.svc
Active Endpoints: 4
Failed Endpoints:0
Endpoint List:
http://lonxxx2532:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2545:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2546:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
http://lonxxx2566:32843/ae7c7ee5c09b4e8198bdbb1ecb8c1c1b/PSI
Could the issue be due to network load balancer?
Could the issue be due to Sticky session configuration on the load balancer.?
How can we get to the root cause of the issue?
Which logging category should we set to 'Verbose' that can give us some hint.
Update: We tried to capture the requests through fiddler and observed that when fiddler is running on the client computer then the connection works perfectly fine even through the load balancer. Probably fiddler is reformatting the SOAP
envelop of the web service requests the way it should before sending the request to the server.
If we do not run fiddler and run some other similar tool (like Charles) then it again gives the issue and the request stucks at /PWA/_vti_bin/psi/winproj.asmx
We ran Wireshark on the servers and found the following for that web service call:
[TCP Previous segment not captured] Continuation or non-HTTP traffic.
Please let me know if someone could provide any hint what can be done next.
Regards, Amit Gupta

There are several ways to configure your load balancer. I would suggest that you work with the network engineer, the load balancer vendor and your project administrator to resolve this issue.
Basically you need URL to be resolved correctly. Also, I don't believe PS2007 did a good job handling load balancing, so you may need to bring someone in good with IIS and see they can tweek IIS to manage the cache better.
As I go back and look at your analysis, I think you should probably look at upgrading to Project Server 2013. They made some improvement in load balancing and the management of distributive cache.
I assume you have 4 WFE because you have thousands of project users. Roughly how many you have? Over 1000, over 5000
Have you tried to see if using two load balancing work? How about just one front end. I often see companies scaling SharePoint and Project server to extremes.
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Load balancing v/s Clustering with BOXI enterprise premium

Similar Messages

Maybe you are looking for