Fcp 3 and macbook pro 17" install prob
not sure if this issue has been addressed, or whether it's a unique one, but here goes:
i have fcp 3 (legit: complete w/ box, manuals, serial, etc). i've had it for awhile but never got around to it. now i'm motivated to load it and learn to use the software.
however, at initial installation, it gives me the (something like) "not original cd" error message.
i poked around on the forum and found an apple link that says fcp 4 or earlier won't work on my laptop (is that right?). if that's the case, what are my options?
thx!
We could try dazzling him by refecting the sun from the playing surfaces of Jimi Hendrix CDs.
Gaining enough time for us to run away and hide.
But then one of us would remember we have to go to his house and borrow the DV converter.
As mentioned...very sharp teeth.
Similar Messages
-
Anybody experience with FCP X and Macbook pro 15inch 2.2?
My old mid 2009 macbook harddrive died on me today, and I'm thinking to upgrade. Sell the old one and buy the new 2011 2.2. The old one was slow in rendering and had lots and lots and lots of spinning beachballs. Was I pushing it too hard? Don't know, but it was horrible. I lost so much time.
Anyway, does anybody have this combo fcp x and the new 15inch macbook pro with the 1gig card and what are your findings??
Thanks
PeterI've got a 2011/2.2/8GB/6750 running FCPX. Once I troubleshooted my external HDs (a Drobo that was nearly full with Time Machine backups was slowing down the entire Firewire bus) things run a lot better. I'm currently storing video on a Promise Pegasus R4 Thunderbolt RAID and the entire system is pretty snappy. The only slowdowns are:
1. clips, events, and projects on slower hard drives can slow down launching the app and screen refreshes
2. FCPX is still flakey. It will run great for a whole day and then will refuse to launch the next morning.
3. exporting through Compressor is slow, particularly when I'm under deadline! 10 minute HD segments can take an hour or so. The Activity Monitor shows the CPUs maxed out, so I suspect that's the bottleneck. I've tried setting up distributed rendering but it doesn't work quite yet.
4. FCPX can be a RAM hog, so if you're a rabid multi-tasker like me, prepare to beachball or change your wicked ways.
All in all, FCPX runs pretty well on my MBP. If video editing was my main line of business, I'd seriously consider a Mac Pro stuffed with RAM and as many cores as I can find. I might wait for a newer one with Thunderbolt though for a bit of future-proofing.
Hope this helps... -
FCP 7.0.3 and MacBook Pro Retina Display
I am a videographer, I shoot on DSLR and edit with FCP 7.0.3.
I have recently got a brand new Pro Retina Display Macbook Pro.
I installed my software, including - FCP7 via migration - I had to do this as there is no DVD drive in the macbook pro - it was installed - from my old Mac Book (black 2008)
FCP 7.0.3 is not opening? It gets to the loading page and goes as far as the top tool bar showing up - but will not open so that I can actually use it.
I got this mac to edit on the fly and take my jobs away with me and do not want to use Final Cut X - I am used to and very happy with FCP 7 interface and operating and don't have the time to learn to use other editing software - does anyone know how I can get the my FCP 7 software working on my brand new machine?kathleenav1 wrote:
I cannot sync a new ringtone using Iphone 4s iOS 7.0.3 and macbook pro os x 10.9 and iTunes 11.1.2. It just keeps saying "finishing sync" but it never does! This all new to me! Help!!
Click the Sync button again. -
Hi!
I have 2 IMacs and MacBook Pro and can not work simultaneously on FCP on all workstations when the network port is open. Can anyone help me on this?Did you purchase Final Cut Pro from the Mac app store? Or install it from disk? If from disk, you may have installed it on all machines using the same serial number, and using all of them simultaneously violates the license agreement. If you purchase from the App store the licensing is different and that may not apply.
-
i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates?
yes you need the updates and patches.
Only some of the drivers that Windows will automatically install at times
and always make sure to insure it is using restore points
do all the maintenance andsuch as normal
use MS Security Essentials for AV is really top notch
Clean disk space
Use WinClone new program to inisure you have a restore image -
i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?
Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better. -
I'm a new potential FCP X user. Can I buy software to load onto my imac and macbook pro or is FCP X only available as a download? I'd like to be able to edit on the road as well as at home.
Here's a short tutorial video about how to move back and forth between your base computer and the on-the-go machine. Very important info about which things can be copied within Finder and which things MUST be copied from within FCP X. Best wishes.
stephen
http://library.creativecow.net/mcauliffe_kevin/FCPX-media-on-the-go/1 -
I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?
Hi twinkytomes,
Welcome to the Support Communities!
The article below may be able to help you with this.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
- Judy -
If my iphone, ipad, MAC and macbook pro are all linked, and then I upgrade only my ipone to IOS 7.0, does that have an effect on the linking to my other MAC products. It seems my calendar has lost a lot of information since the upgrade.
If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards. -
Can I have an iPhone, ipad and MacBook Pro with the same apple id
Can I have an iPhone, ipad and MacBook Pro with the same apple id. When I use I tunes it get confusing and I have a paid app that needs the same id
When syncing the iPhone and iPad with iTunes on your computer that is logged in with the Apple ID you plan on using on all three, the Apple ID should be transferred to the iPhone and iPad for the iTunes & App Stores on each device. If not, you'll need to sign out of the existing Apple ID on the iPhone and iPad followed by signing in with the Apple ID you want to use on both.
Keep in mind that all 3rd party apps include DRM protection which is tied to the iTunes account or Apple ID that was used to download the apps. With an app installed on your iPad and iPhone that was downloaded with a different Apple ID from the one you will be using now, you will need to use that Apple ID and password to install app updates for those apps. Not possible to transfer apps purchased with one Apple ID to another or to merge Apple IDs. -
At first, my macbook couldn't start up. It only displayed apple logo with a spinning wheel on grey screen for hours and hours. Then I decided to reinstall the OS. I tried so many times to install but the installing time said thousands of hours remaining to complete . I left the computer for days but it didn't install OS. I tried that connecting the Ethernet cable as well but it didn't work. Then I took out all my important files by connecting it to another macbook and formatted the hard drive. Then tried to install OS again. But still didn't work. I checked on you tube and changed the hard drive cable as well. Still didn't work. I cannot install OS X Lion on my MacBook Pro. Installing time is in negative hours. (-2,147,483,648 hours). Seriously looking for help.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
MacBook and MacBook Pro Battery Update
http://www.apple.com/support/macbook_macbookpro/batteryupdate/
Apple has recently discovered that some batteries used in its MacBook and MacBook Pro notebooks may have battery performance issues. Apple is offering a software update that is designed to improve battery performance.
The battery update is available immediately via Software Update or downloadable here.
Note: The factors causing the performance issues do not present a safety risk. You may continue to use your current battery.
This battery update should be run on all MacBook and MacBook Pro computers and extra batteries that were purchased between February 2006 and April 2007.
If, after you have installed the battery update, your battery has any of the symptoms listed below, please make a reservation to bring your computer with its battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. If Apple or an AASP determines that your battery is eligible for replacement, you will receive a new battery, free of charge, even if your MacBook or MacBook Pro is out of warranty.
For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Identifying an affected battery
Affected batteries will have one or more of the following symptoms:
Battery is not recognized causing an “X” to appear in the battery icon in the Finder menu bar.
Battery will not charge when computer is plugged into AC power.
Battery exhibits low charge capacity/runtime when using a fully charged battery with a battery cycle count (as shown in System Profiler) of less than 300.
Battery pack is visibly deformed.
Note: If your MacBook or MacBook Pro battery does not have any of the symptoms noted above, your battery does not need to be replaced.
Next Steps
To participate in this worldwide program, your MacBook or MacBook Pro battery must show the symptoms noted above. If it does, please make a reservation to bring your computer and battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. The U.S. support number is 1-800-275-2273. If you are located outside the U.S., please see Apple's international contact list for your local Apple Technical Support phone number. An Apple technical support representative or an Apple Authorized Service Provider (AASP) will determine if the battery is eligible for replacement, free of charge. Customers are responsible for transportation costs to eligible AASPs and retail stores.
If a replacement battery is sent to you via airmail, it is important that you return the older battery to Apple so that it can be properly recycled.
This program extends repair coverage on the battery for up to two years from the date of purchase of the computer for Intel Core Duo-based MacBook and MacBook Pro computers. Apple will continue to evaluate the battery update program and will provide further extensions as needed. Apple also reserves the right to modify the program if other solutions that address the battery performance issues become available.For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Pretty nice change for those C2D's -
My iPad 2 white 32gb wifi and MacBook Pro still under warranty got stolen because my house got break in last night. I have the serial number and is there any other solution to track it back. I installed Dropbox in my Mac as well as my iPhone. Can I track it via my iPhone? btw below are the serial number of my gadgets .
For MacBook Pro 1.3' = C0******V30
For ipad 2 = DL*******KPJ
Really need to help to find back my gadgets. Lots of important info in there.
<Edited By Host>Call the police. Your items cannot be tracked by their serial numbers.
What To Do If Your iDevice Is Lost Or Stolen
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in Toronto delta Chelsea hotel downtown an I am not able to track it. Please help! [email protected], has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
My new IMac and Macbook Pro are each loaded with Mountain Lion. Have Office for Mac also
When I try to see my Grandson on webcam out of state the login will not activate. For PC use I needed Java and Active X to let it run. My Java is checked as ready to go but nothing happens. Otherwise these are great computers. Please help me through the process. The Geniuses at my apple store can't understand what to do.
[email protected] or [email protected]By default, OS X does NOT come with Java installed nowadays. You need to open the Java Preferences app found in Utilities; when you do that the first time, it will inform you of the fact and offer to install the product for you.
Afterwards, due to a major security issue we had back in the first quarter of the year, the plugin is disabled by default. You need to revisit the Preferences and enable manually. It will auto-disable if unused in awhile.
Lastly, you may have to adjust which Java instance is being used, the 32-bit or the 64-bit. Default is 64-bit, but some applets crash & burn or outright refuse to run in such a platform. You can prioritize which version you prefer by dragging on top in the Preferences. -
Apple MagSafe Airline Adapter for MacBook and MacBook Pro
Does the Apple MagSafe Airline Adapter for MacBook and MacBook Pro work in cars to in the cigerete lighter and how does it work on a airoplane cause in airoplanes there is only a mike connection thats about it ?
This is an alternative solution that works great for me. I always carry a small and lightweight DC to AC converter with me in my case when I'm on the road. It's a Wagan Tech Smart AC 100 USB that I picked up at Costco for under 20 bucks. 100 watt capability and allows me to use all my electronics and chargers on the road. I can use it to charge the cellphone, laptop, ipod, etc.
Even includes a USB port on the side for charging USB based products and also includes the aircraft adaptor (and of course a cigarette lighter adaptor) and everything fits into a small cloth bag (included).
http://www.wagan.com/htmls/detail-2382.html
The link is for the newer 120 watt version but it looks identical otherwise. If you don't have access to Costco then check the link provided for either direct purchase or the availability of other resellers. There's a "where to buy" tab at the top of the screen. Cheers!
P.S. I just noticed that you are from the U.K. I'm sure this will still work as your MacBook charger should autoswitch down to 110v input, you'll just need to make sure you have the North American plug installed. If not, I'm sure there are similiar DC to AC adaptors available in the U.K. Hope that helps!
Message was edited by: joudbren
Maybe you are looking for
-
How to add a dynamic drop down list in RDLC reports in WPF
I have to Load an RDLC report in WPF application and need to include a drop down list in report.Based on the selection of drop down list different reports to be generated.I am using C# and WPF. Eg: I have to list the details of employees in in RDLC r
-
import javax.swing.*; import java.awt.*; public class ControlWindow extends JFrame private JPanel inputPanel = new JPanel(); private JButton inputButton = new JButton("Input"); private JLabel inputLabel = new JLabel("Click here to input values"); pri
-
I'm trying to get screen sharing to work between a 2011 MBP and a 2011 Mac Mini. When the Mini is plugged into a monitor I can get the MBP to connect to it, but if I disconnect the monitor the MBP can't connect to it. In both cases I'm still able to
-
Question about trying to import my itunes library
ok so like i had a problom with my computer and had to toattly unistall and reinstall itunes, after this nothing was in my itunes library, however i backed up all my music and the itunes libary file on my external hard drive, now when i try to import
-
Anyone with any major 3.02 issues as yet ?
So far, this update seems very stable and responsive... Maybe because I've disabled iTunes store so just have My media listed... Maybe it's just a good update... Ok there are a couple of annoyances posted but not many yet. Responsiveness and stabilit