Load FI data from 2004

Hello BW Experts,
I need to load 0fi_gl_4 data from 2004 to current. and also enable the delta..
please let me know if the below process is correct.
1) full load for year 2004
2) full load for year 2005
3) full load for year 2006, till last fiscal period
4) init from current period - 12/9999
5) delta
let me know if i miss anything..
Thanks,
BWer

Hi,
The above process is correct if you are loading to an info cube.
If you are using ODS in between DS and Cube, you have to convert all your full loads into Reapir Full Requests before Initialization.
Hope this helps.
Praveen

Similar Messages

  • I have hierarchy data in R/3 side how will i load that data from R/3 to BW

    Hi all,
    i have my hierarchy data in the R/3 side how will i load that data from  R/3 to BW side
    Regard
    Kiran Kumar

    Hi Kiran,
    Here is the procedure:
    1.      In the Data Warehousing Workbench under Modeling, select the InfoSource tree.
    2.      Select the InfoSource (with direct update) for the InfoObject, to which you want to load the hierarchy.
    3.      Choose Additional Functions® Create Transfer Rules from the context menu of the hierarchy table object for the InfoObject. The Assign Source System dialog box appears.
    4.      Select the source system from which the hierarchy is to be loaded. The InfoSource maintenance screen appears.
    ○       If the DataSource only supports the transfer method IDoc, then only the transfer structure is displayed (tab page DataSource/Transfer Structure).
    ○       If the DataSource also supports transfer method PSA, you can maintain the transfer rules (tab page Transfer Rules).
    If it is possible and useful, we recommend that you use the transfer method PSA and set the indicator Expand Leaf Values and Node InfoObjects. You can then also load hierarchies with characteristics whose node name has a length >32.
    5.      Save your entries and go back. The InfoSource tree for the Data Warehousing Workbench is displayed.
    6.      Choose Create InfoPackage from the context menu (see Maintaining InfoPackages). The Create InfoPackage dialog box appears.
    7.      Enter the description for the InfoPackage. Select the DataSource (data element Hierarchies) that you require and confirm your entries.
    8.      On the Tab Page: Hierarchy Selection, select the hierarchy that you want to load into your BI system.
    Specify if the hierarchy should be automatically activated after loading or be marked for activation.
    Select an update method (Full Update, Insert Subtree, Update Subtree).
    If you want to load a hierarchy from an external system with BAPI functionality, make BAPI-specific restrictions, if necessary.
    9.      If you want to load a hierarchy from a flat file, maintain the tab page: external data.
    10.      Maintain the tab page: processing.
    11.      Maintain the tab page: updating.
    12.      To schedule the InfoPackage, you have the following options:
    ○       (Manually) in the scheduler, see Scheduling InfoPackages
    ○       (Automatically) using a process chain (see Loading Hierarchies Using a Process Chain)
    When you upload hierarchies, the system carries out a consistency check, making sure that the hierarchy structure is correct. Error messages are logged in the Monitor. You can get technical details about the error and how to correct it in the long text for the respective message.
    For more info visit this help pages on SAP Help:
    http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/3d/320e3d89195c59e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4dae0795-0501-0010-cc96-fe3a9e8959dc
    Cheers,
    Habeeb

  • Unable to load the data from PSA to INFOCUBE

    Hi BI Experts, good afternoon.
        I am loading 3 years data( Full load ) from R/3 to Infocube.
       So loaded the data by monthwise. So i created 36 info packages.
      Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
    So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
      Here i got data in PSA without fail.
      Then i tried to load the data from PSA to Infocube MANUALLY.
    But its not happening.
      One message came this
           SID 60,758 is smaller than the compress SID of cube ZIC_C03; no        request booking.
       Please give me the solution how to solve this problem.
      Thanks & Regards
         Anjali

    Hi Teja,
       Thanks for the good response.
      How can i check whether it is already compressed or not?
      Pls give me the reply.
      Thanks
              Anjali

  • Regarding  Loading the data from DSO to cube.

    Hello Experts,
    I have DSO which loads data from psa  using 7.0 tranformation (using DTP).  And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by  right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
    Please help me with this.
    i want to load the data in the init request to cube..
    Thanks

    Hi Shanthi,
    Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
    Thanks

  • Loading Textual Data from HttpService Would Not Show Up on TextArea

    Hi,
      I have something fairly strange here that I have a little problem getting it to work. I am loading some data from XML and attempt to format it a little more on Actiosncript and print it out on the TextArea. For some reason, it would not show up, even though when I used Alert.show it does spit out the entire xml data set. Based on this, I know my data has been loaded correctly, but I am not sure why it is not showing up on my page.
    Here is the code,
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
        <mx:states>   
            <mx:State name="view">
              <mx:RemoveChild target="{intro}"/>
                <mx:AddChild relativeTo="{applicationcontrolbar1}" position="before">
                    <mx:TextArea editable="false" id="viewText" width="450" height="279" text="{messageInfo}"/>
                </mx:AddChild>
            </mx:State>
        </mx:states>
        <mx:Script>
            <![CDATA[
                import mx.events.ItemClickEvent;
                import mx.controls.Alert;
                import mx.rpc.events.ResultEvent;
                import mx.rpc.events.FaultEvent;
                [Bindable]private var message:XMLList;
                [Bindable]private var messageInfo:XMLList;
                private var savedIndex:int = 99999;
       private function clickHandler(event:ItemClickEvent):void {
                    if (event.index == savedIndex) {
                        //don't do a thing
                    else {
                        savedIndex = event.index;
                          navigateToURL(new URLRequest("../"+ event.item.data));
                private function toggleButtonBar_itemClick(evt:ItemClickEvent):void {
                    currentState = evt.item.data;
                    if(evt.item.data == "view") view();
               private function view():void{
                  currentState="view";
                  userView.send();          
               private function httpService_fault(evt:FaultEvent):void {
                    var title:String = evt.type + " (" + evt.fault.faultCode + ")";
                    var text:String = evt.fault.faultString;
                    Alert.show("There is an error! Type " + title + " " + text);
               private function httpService_result(evt:ResultEvent):void {
                    messageInfo = XML(evt.result).messages.message;
                    Alert.show(messageInfo);
                    message = XML(evt.result);
                    var message_name:String = "";
                    var message_phone:String = "";
        for each (var message:XML in messageInfo.messages.message) { 
              viewText.text += "Name " + messageInfo.name + "\n";
              viewText.text += "Phone " + messageInfo.phone + "\n";               
            ]]>
        </mx:Script>
    <mx:HTTPService id="userView" url="messages.xml" resultFormat="e4x"
      fault="httpService_fault(event);" result="httpService_result(event)" />
    <mx:PhoneNumberValidator id="pnVal" source="{your_phone}" property="text"/>
    <mx:EmailValidator id="emailVal" source="{your_email}" property="text"/>
        <mx:Array id="dp">
            <mx:Object data="view" label="View"/>
        </mx:Array>
        <mx:Panel id="panel" title="My Home" height="70%">            
        <mx:TextArea id="intro" width="77%" height="100" borderStyle="none" paddingLeft="10" color="black">
                <mx:htmlText><![CDATA[Welcome to my page.]]></mx:htmlText>
            </mx:TextArea>
             <mx:ApplicationControlBar id="applicationcontrolbar1">
            <mx:ToggleButtonBar id="toggleButtonBar" color="#FFFFCC"
                    dataProvider="{dp}"
                    itemClick="toggleButtonBar_itemClick(event);" />
        </mx:ApplicationControlBar>           
        </mx:Panel> 
    </mx:Application>
    Note, there are other items in the array, but those are not relevant to the question of the topic here, and therefore I am not posting the code for those sections.
    When I click on the View button, it does give me the correct state, but I get a blank box of textArea with no data when I know there is output from Alert.show in the view(). What have I missed?
    Thanks for your help.

    Thanks for the pointer. As a matter of fact, I found out that it is because of my xml nodes messing up, and that the text was displayed as white for someb reason. With a white background, of course I would not see a thing.
    Thanks again.

  • ITunes was unable to load provider data from Sync Services

    Hello,
    My itunes says : "iTunes was unable to load provider data from Sync Services", when i connect my iphones.
    My iphones sync fine on my other computer.
    This problem occurred when formatting my pc from work.
    And this problem prevents me only sync tab "info" (contacts, calendar and Outlook). This does not prevent me to synchronize other tabs.
    I already tried to reinstall itunes, and the diagnostic option.
    Thanks in advance.

    This problem has been ongoing since 9.2 came out ... i.e. quite some time.
    I uninstalled and then removed all traces off Apple applications, then reinstalled back to the prior version and ran with no problems.
    When I upgraded to V4 iPhone software I had to upgrade again and ran into the same problem.
    Upgrading from Outlook 2000 to Outlook 2003 was of no benefit.
    I have purchased Sync2, set up a gmail account and sync over wireless from Outlook to gamil, then from gamil to iPhone.
    This only does calendar and contacts (haven't found a solution for notes) but waiting for Apple to sort this will probably see you old and gray.
    Good luck.

  • ITunes 10.5.3, Unable to Load Class Data from Sync Services, Crashes Repeatedly

    Ever since iTunes 10.5.3 on my Windows 7 x64 box, I've been having serious problems keeping iTunes running:
    1)  Any time I connect my iPhone or iPad, or any time they attempt to sync over WiFi, I get the 'Unable to load class data from sync services' error.  It's worth mention that the iPhone or iPad do actually then proceed to sync correctly, and all media / data is synchronized successfully, as far as I've been able to tell.  I've reset sync history, restored the iPhone and iPad, manually moved the SyncServices directory, set both the iPhone and iPad up as new, completely uninstalled iTunes and the mobile device software, re-installed, and *nothing* I do fixes this issue or even seems to impact it.  Uninstalling iTunes 10.5.3 and reinstalling iTunes 10.5.2 resolves this error.
    2)  iTunes 10.5.3 has serious crashing problems on my machine, though I've searched through forums and found a lot of other people with the problem.  In my case, sporadically as iTunes access the iTunes store (for example, I can always make it happen by subscribing to the Diggnation podcast and telling it to refresh the podcast), I get a full application crash which generates the following event in the event log:
    Faulting application name: iTunes.exe, version: 10.5.3.3, time stamp: 0x4f14cc3d
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e211319
    Exception code: 0x80000003
    Fault offset: 0x0001280c
    Faulting process id: 0x564
    Faulting application start time: 0x01cce78789dc009a
    Faulting application path: D:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
    Report Id: ecc77400-537a-11e1-b809-00248c196007
    Again, uninstalling iTunes 10.5.3 and re-installing iTunes 10.5.2 fixes this issue as well, but I really shouldn't have to do that.  Is there any actual solution to these problems other than dowgrading to an older version?
    Yes, I'm running current malware protection (and my system is clean) and yes, I've already checked any other obvious culprits to make sure I don't just have a corrupt library or file somewhere that's causing it.  My Windows 7 install is completely up to date from a Windows Update perspective and also from a driver perspective (even including the motherboard and chipset drivers).  I made sure to do a system file integrity check (sfc /scannow) and it confirmed my install of Windows isn't suspect, but beyond all that I was able to reproduce these failures on a completely separate machine running Windows 7 x64, without any of my media library or data on it -- iTunes 10.5.3 just seems to be bad news on Windows 7 x64 for me, even though I know there are definitely people are using it successfully.  I don't get any other application crashes for any other applications, and I've never had an issue like this with any previous version of iTunes...
    Last but not least, in case it matters, I'm running iOS 5.0.1 on both the iPhone4 and the iPad2.  The iPhone4 is the GSM AT&T model and the iPad2 is the CDMA Verizon model.

    OK, I've given up.  Uninstalled iTunes 10.5.3 permanently.  It's a shame, 10.5.2 works perfectly but 10.5.3 is a complete and total cluster for me.
    Anyone with the same problems who hasn't done this already, just uninstall iTunes and the Apple Mobile Device Service in your Add/Remove Programs, then re-install iTunes 10.5.2.  You won't lose your library or any settings or apps, it will just go back to working again.
    I wish Apple would acknowledge this so that I'd at least know it would be fixed in the future.

  • Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it fr

    Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.

    UPDATE: The true error is : '
    "itunes was unable to load data class information from sync services"
    Any of the topics didnt work.
    Sync on my wife's laptop works.

  • Itunes was unable to load provider data from sync services. Reconnect or try later

    Hi everyone
    This issue has got me stumped.
    I have a Dell Vostro desktop computer with Windows 7 SP1 64 bit edition.
    I used to be able to sync now I cannot bakup or sync.
    The device is an iphone 4s with the latest software IOS 5.1.
    Itunes is version 10.6.0.40, the latest.
    To try to fix this problem I removed itunes/quick time completely. Removed Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update,
    Deleted the itunes and quick time folders, the common file folders and files, deleted anything related to able under appdata local and roaming, removed apple folder under program data, scanned through registry and removed all apple entries.
    Then I rebooted the computer, re-installed itunes/quicktime and have the same error appear again.
    I have gone through this process at least 5 times , but still keep getting the same error, cannot go past it.
    I found a solution on this forum but it only applies to MACOS, could not find anything suitable for windows 7 environment.
    Also searche the web high and low and tried several different advice from people.
    This has to be a bug with Itunes! I would like to hear from Apple developers and programmers why I have to suffer so much to sync my device.
    As a last resort I am planning to rebuild windows 7 from scratch but is is a big job.
    Tried also to disable firewall, antivirus, check the apple windows services are running, nothing works to get me past this error.
    Please help someone!
    Thanks and regards
    Alfred

    Did you have a look ath this (rather) long thread about it?
    https://discussions.apple.com/message/17214161#17214161 , for example:
    danielfromkongsvinger
    Re: Unable to load provider data from Sync Services 
    16.12.2011 20:21 (in response to wisniak)
    "I then followed a tip found in PCWorld  and performed the following:
    1. Make sure iTunes isn't running.
    2. Click Start, type regedit, then press Enter.
    3. Navigate to this Registry location: HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers
    4. Look in the main pane for a key that refers to iTunes. If you find one, delete it, then exit the Registry.
    5. Start iTunes. The offending message should be gone!"
    This actually worked for me! I have struggeled with this error for years, and now it's gone. Thanks!

  • Load the data from a transparent customised table in BW to an ODS

    Hi there,
    How can you load the data from a transparent customised table created in BW to an ODS.
    Many thanks.
    Sarah

    Hi,
    just create a generic datasource in rso2 for that table, replicate the datasource for source system 'myself', create a infosource and assign the new datasource to that infosource. Create a update rule from infosource to ods, create a infopackage and load the data.
    regards
    Siggi

  • Loading the data from a text file to a table using pl/sql

    Hi Experts,
    I want to load the data from a text (sample1.txt) file to a table using pl/sql
    I have used the below pl/sql code
    declare
    f utl_file.file_type;
    s varchar2(200);
    c number := 0;
    begin
    f := utl_file.fopen('TRY','sample1.txt','R');
    loop
    utl_file.get_line(f,s);
    insert into sampletable (a,b,c) values (s,s,s);
    c := c + 1;
    end loop;
    exception
    when NO_DATA_FOUND then
    utl_file.fclose(f);
    dbms_output.put_line('No. of rows inserted : ' || c);
    end;
    and my sample1.txt file looks like
    1
    2
    3
    The data is getting inserted, with below manner
    select * from sampletable;
    A     B     C
    1     1     1
    2     2     2
    3     3     3
    I want the data to get inserted as
    A     B     C
    1     2     3
    The text file that I have is having three lines, and each line's first value should go to each column
    Please help...
    Thanks

    declare
    f utl_file.file_type;
    s1 varchar2(200);
    s2 varchar2(200);
    s3 varchar2(200);
    c number := 0;
    begin
    f := utl_file.fopen('TRY','sample1.txt','R');
    utl_file.get_line(f,s1);
    utl_file.get_line(f,s2);
    utl_file.get_line(f,s3);
    insert into sampletable (a,b,c) values (s1,s2,s3);
    c := c + 1;
    utl_file.fclose(f);
    exception
    when NO_DATA_FOUND then
    if utl_file.is_open(f) then utl_file.fclose(f); ens if;
    dbms_output.put_line('No. of rows inserted : ' || c);
    end;SY.

  • When Loading the data from a french Language

    Hi all
    First let me Wish u Happy Friendshipday
    When iam loading the data from a french system. Do i need to have a french key board.
    And wht measures should i take to load a load when it is not in english language..

    Hi
    You dont need a french keyboard!
    Just make sure that the french language is installed in your BW system
    TO check this go to transaction RZ10 and select a defined parameter.
    In it, see if apart from English and German, if french is also checked. Installation of language is job of basis guys and check with them too
    Hope this helps
    Prakash
    Assigning points is a way of saying thanks on SDN

  • How to Load Arabic Data from flat file using SQL Loader ?

    Hi All,
    We need to load Arabic data from an xls file to Oracle database, Request you to provide a very good note/step to achieve the same.
    Below are the database parameters used
    NLS_CHARACTERSET AR8ISO8859P6
    nls_language american
    DB version:-10g release 2
    OS: rhel 5
    Thanks in advance,
    Satish

    Try to save your XLS file into CSV format and set either NLS_LANG to the right value or use SQL*Loader control file parameter CHARACTERSET.
    See http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_control_file.htm#i1005287

  • How to Load the data from excel file(Extension is .CSV) into the temp.table

    Hi
    How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
    My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
    Kindly Suggest the Solution.
    Regards,
    Sachin

    Hello Sachin,
    You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
    Instead of copy values into forms you can save them in your temporary table.
    Kind regards,
    Alex
    If someone's helpful or correct please mark it accordingly.

  • How to load the data from .csv file to oracle table???

    Hi,
    I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
    Thanks in advance

    981145 wrote:
    Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
    the command is
    sqlldrType it and see if you have it installed.
    Have a look also at the FAQ link posted by Marwin.
    There are plenty of examples also on the web.
    Regards.
    Al

Maybe you are looking for