Load FI data only for open items

Hi all
I want to load FI data only for open items.
We started off with FI_GL_4 which has STATUSPS(status of FI line item)based on which we have written a start routine to filter out the closed items.
But for other FI-GL datasources we dont have STATUSPS field.
Then can we load data directly without applying any restriction on it as we dont have STATUSPS field in it?
Or is there an other way to find all open items ?
Please helpout.
Awaiting replies.
Harika.

Hi Harikag,
when you are loading delta data in 0FI_GL_4, it is NOT the right approach to load only the open items.
Say for example, you have loaded a record with open status.
If the status of the record gets changed to 'Closed' in SAP, then this will not flow to BW, because of the filter that you are trying to apply in the data load.
So the item will continue to remain open in BW, though it is closed in R3.
hence it is highly recommended to do this filtering at report level.
Otherwise, you are looking at full load option by dropping data everyday, which will have performance issues in loading.
Thanks,
Krishnan

Similar Messages

  • Interest calculation only for open item for customers

    Hi, do you know how to calculate Interest calculation only for open item for customers?I do not want to see cleared   items. I have problem with customization.
    Best Regards
    Tom

    In the item interest calculation, you can tick the  'open items' for calculation of interest and also select the 'no cleared items'.
    Regards

  • S_ALR_87012168 - Due Date Analysis for Open Items - How to add a column?

    Hello,
       I am trying to add a characteristic to the output of this report. I am trying to add the Reference field from BKPF to the list of available characteristics to choose from. It is available in the dynamic selections list so the field should be available in the program, I am just not sure how to get it onto the char. list.
    S_ALR_87012168 - Due Date Analysis for Open Items
    Any help would be greatly appreciated!

    Sorry but had to go in a different direction...
    Thanks!

  • S_ALR_87012168 - Due Date Analysis for Open Items - Add Characteristics?

    Hello,
    I am trying to add a characteristic to the output of this report. I am trying to add the Reference field from BKPF to the list of available characteristics to choose from. It is available in the dynamic selections list so the field should be available in the program, I am just not sure how to get it onto the char. list.
    S_ALR_87012168 - Due Date Analysis for Open Items - SAP delivered Report Painter report.
    Any help would be greatly appreciated!

    Try:
    Go to -> Line items
    You can change the display variant there to include the reference.
    Rob

  • S_ALR_87012078 - Due Date Analysis for Open Items display changers

    Hi
    I need to change this reports( S_ALR_87012078 - Due Date Analysis for Open Items ) display type to column display. How can I do that. I thought of uesing GoTO> Colum display but it is inposible 'cos always they are in inactive mode even in the change mode. pls advice on this
    Thanx

    Hi
    did u try S_ALR_87012077
    Thank You,

  • Due date analysis  for open  items

    Hello All,
    I have to do the following things..can anyone of you help me .....to say is this possible and yes then may be just overview of how could i do this....
    i have been asked to go to transaction S_ALR_87012168...then the report will come ..in that enter say company code..and execute...
    when we will execute my job starts from here ..i have been asked to add one attribute WBS_ELEMENT  to the left navigation..(add one in addition of the entry you see like compnay code ,customer,......)....
    and when i click on the WBS_ELEMENT it should show dues on the riigh as you can see ....
    please help.

    There is not only one type of Open Items reports. For all marketing documents, the Due Dates are readily available.  If you want to combine all Due Dates into one, what is the meaning of this due date then?
    Thanks,
    Gordon

  • FBL5N & S_ALR_87012168 - Due Date Analysis for Open Items

    Hi,
    As per the above mentioned i could find the that there is differene in the account balances in FBL5N report and due date analysis for customers. Where as FBL1N and the vendor due date analysis figure in the report are same.
    Just want to know why is difference in customer related.
    Require a immediate reply.....please help me
    Thanks in advance.
    jai

    Hi
    I could not understand which report you compared with s_alr_87012172.
    Have you tried matching FD10N and FBL5N.  If not matching, then there could be problem with authorizations in FBL5N.
    From report S_ALR_87012168, you can also drill down to view the line items.  Hence if you drill down and list the line items, it will give you some clue.
    Try whether if any parked documents are included in FBL5N.
    Also ensure that in report S_ALR_87012168, Database is selected in Data sources.
    Regards

  • Fields on transaction S_ALR_87012168 -Due Date analysis for open Items

    Hello Gurus
    I am not able to find the technical name for report on fields due date 0-30,31-60 and so on because F1 does not work on those fields.
    Do you know the fields name and SAP table?
    Thanks in advance

    Hello,
    Please go to the FunctionPool  SAPLKYRE  and then click on the statement "INCLUDE lkyref20.                    " Subprograms for reading data". In the subprogram  "LKYREF20" click on INCLUDE LKYREF2B .  " READ_TABLES. Now in the Include LKYREF2B you can see the tables which are used for the output of the transaction S_ALR_87012168. I am not sure, how important it will be for you, but after a lot of R&D, I could get this information. You may let me know your findings.
    Thanks and regards,
    Suresh Jayanthi.

  • S_ALR_87012168 - Due Date Analysis for Open Items

    Please help me about next issue:
    how can I add new characteristic to report. When I try to add with transaction FDIV, SAP only offer predefined characteristic.
    I need to add filed XREF1 as characteristic.

    Hello Dusan
    i have same issue i want to add WBS_ELEMENT field to the characteristics list ..........as you have closed this thread can you suggest how did you do that ........please help ASAP.

  • AP - Transaction S_ALR_87012078 (Due Date Analysis for Open Items)

    Hi,
    I have an enquiry regarding the above mentioned transaction from Accounts Payable.
    After executing this report, the DUE and NOT DUE amounts are group according to the number of days (such as 0-30, 31-60, 61-90).
    Is there any way i can display the lists of all  vendors belonging to say, 0-30 days category?
    I can only drill down to display all the vendors, but this will not show which category each vendor belongs to.
    Ultimately, my aim to find the vendor aging report to display the list of all vendors with the outstanding amounts to be paid.
    Appreciate if any expert can advise, thanks

    Hi
    did u try S_ALR_87012077
    Thank You,

  • Change Currency S_ALR_87012168 - Due Date Analysis for Open Items

    Hi Experts,
    Report S_ALR_87012168 is showing amounts in EUR for all USD company codes. Even all the Invoices' Local and Doc currency is USD.
    Please help where I can change default currency for this report?
    Regards,
    Simar

    I found the solution and want to share with you all.
    On top goto Settings>Currency and change it from EUR to USD. Now from and to is USD.
    Thanks,
    Simar

  • For Open Items

    I needed to make a account receivable report that should include
    Sales engineer (Partner name)  and Sales order No and Invoice No and Invoice Data.
    Only for open items Which tables have to join
    Please Guide me.

    Thanks

  • Tollerence group for open item only

    hii all
    can any one tell me, if I want to make tollerece group fo employees and also want to specify the tollerence limit for amount posted per document only. not want specify tollerence limit for open item account (customer/vendor). is it possible? i have done blank in "amount per open item account" but the system not allow to post any vendor/ customer invoice. is it possible to solve

    Hi,
    It is possible to control the users or employees for a certain amount,by configuring  as shown as following Path
    FA-G/L Accounting-Business Transactions-Open item clearing-Clearing Differences-Define for Employee and the
    G/L acconts.
    MAy i hopeful, ths will hep p
    Regards,
    Kanike

  • FBL1N - field for open item at key date

    Hi All,
    we are developing a customising report like FBL1N.
    for vendor open itesm, we have table BSIK. In that table, we could not find field for open items at key date.
    Could you please suggest which field we can use in table BSIK for that.
    Regards
    Deepak

    Hi
    You may find a list of some famous  tables on FI.. honestly i do not know which one is the required ? \\
    Accounting documents
        BKPF                Accounting documents
        BSEG               item level
        BSID                 Accounting: Secondary index for customers        
        BSIK                 Accounting: Secondary index for vendors          
        BSIM                 Secondary Index, Documents for Material          
        BSIP                 Index for vendor validation of double documents  
        BSIS                 Accounting: Secondary index for G/L accounts
        BSAD               Accounting: Index for customers (cleared items)
        BSAK                Accounting: Index for vendors (cleared items)  
        BSAS                Accounting: Index for G/L accounts (cleared items)
    Regards
    Mahmoud EL Nady

  • Urgently: data provided by t.code FBL5N for open items ....

    Hi All,
    Data provided by t.code FBL5N for open items, are different from data provided by t.code S_ALR_87012168 for the same customer ...
    I can't understand what could it depend on.....
    Could anyone help me?
    Thanks
    Gandalf

    Hi
    This transaction:S_ALR_87012168  is the same for open items but for this report you need to schedule diary  for updating this Evaluations.
    For configure this Evaluations go to: Information System > Tools > Configure.
    I hope this can help you.
    B. Regards
    Cristina

Maybe you are looking for

  • Can't open after archive install and migration

    Hi there, so heres the deal. I recently posted an issue I had with my imac and turned out the only way to save all my data was to do an archive and install. So I upgraded my HD at the same time to a 2 TB. They then installed OS X and did migration wi

  • "Open With" settings lost on reboot

    All file type associations are reset to their defaults when the machine is shut down. Where are the configuration files stored?

  • IPhoto keeps crashing when using book func.

    Hi all, I bought a brand new IbookG4 in august, and last week end wanted to use the book functionnality to create my wedding book. I've never been so angry with a computer.... meaning IPhoto crashed more than 10 times, and finally i've lost everythin

  • Home sharing not working after update to latest version of itunes

    Prior to the latest update I was able to properly share items across Home Sharing from my main computer to the laptop and back.  Now after updating to the newest version on all there is no longer the option to download items acoss into the other mach

  • "Error Compiling movie: Unknown Error" message when rendering

    I've read forums and tried several things but still getting this error message when I try to render footage on my timeline. I was copying footage from one sequence that had a "yellow" bar in the top part of the timeline window into another sequence a