Load file into Oracle without staging area

Is it possible to change LKM to do this?
Thanks

Yes it is.
You can set the 'Work Schema' (staging) of your topology object to the same as your target (Data Schema), then all objects will be created in the target (C$ I$ etc), therefore no staging area is required - although this is not best practice.
If you want to remove the staging tables altogether, then you can alter the knowledge module to load directly into the target in your LKM. It depends on the method you are using (external tables, sqlloader for example). You IKM will also need amending to basically do nothing, but has to be present for the interface to work.
Cheers
Bos
Edited by: Bos on Apr 7, 2011 8:54 AM

Similar Messages

Does anybody know how Oracle load large N-Triple file into Oracle 11g R1?

Does anybody know how Oracle load large N-Triple(NT) file into Oracle 11g R1 by using sql*loader according to their benchmark results?
Their benchmark results indicate they have over come the large data set problem.
http://www.oracle.com/technology/tech/semantic_technologies/htdocs/performance.html
It means they have loaded LUBM 8000(1.068 Billion+ Triples) into Oracle successfully, but there is no detailed steps provided. For instance, 32-bit or 64-bit platform they used, only one NT file being used corresponding to one dataset or several NT files?
Is there any exception occured during the loading process if the NT file beyond 60GB? When using jena to generate NT file against LUBM(8000), the size of the NT file would definitely beyond 60GB.
We are dividing such large NT file into several small ones? Is it a good approach? I'm hesitating to do so!

A Linux 32-bit platform was used for bulk-load of LUBM-8000 1.106 billion (before duplicate elimination) RDF triples into Oracle.
Multiple gzipped N-Triple files were used to hold the LUBM-8000 data. zcat was used on all these files together to send the complete data into a named pipe. SQL*Loader used this named pipe as the input data file to load the data into a staging table in Oracle. Once the staging table was loaded, the sem_apis.bulk_load_from_staging_table API was used to load the data into Oracle Semantic Store.
(Additional details in http://www.oracle.com/technology/tech/semantic_technologies/htdocs/performance.html )
Thanks.

Open an Excel file to read and load it into Oracle - Oracle COM Automation

Hello All,
Please I need your help for this problem:
I need to load Excel sheet data (read the data) and load it into Oracle database (insert into a table), the excel file created and has data before, and saved with xls format. and I need to do that using the Oracle® COM Automation (ordcom package). The examples I found open and create a new workbook and deletes the old saved data, so I need to open (edit) the sheet just for reading.
I appreciate ans sample code to help me do that, Please help me out. This is very urgent.
Thanks alot and best regards,
Nabil

For reading from Excel, there are some easy ways like Oracle Heterogenious Services. If you want to use COM then:
My orawpcom.dll file exists in the directory C:\oracle\product\10.2.0\db_2\bin
C:\oracle\product\10.2.0\db_2\bin>dir orawpco*.dll
Volume in drive C is C_Drive
Volume Serial Number is 8A93-1441
Directory of C:\oracle\product\10.2.0\db_2\bin
03/20/2006 05:06 PM            61,440 orawpcom.dll
10/11/2006 03:20 PM            81,920 orawpcom10.dll
               2 File(s)        143,360 bytes
               0 Dir(s) 65,407,717,376 bytes free
C:\oracle\product\10.2.0\db_2\bin>Information about my database version.
SQL> /* My databaser version */
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
SQL> Preparing the user SCOTT for COM automation.
Now, I will run comwrap.sql from scott user. I have edited the comwrap.sql to adjust my library path here:
create library utils_lib as 'C:\oracle\product\10.2.0\db_3\bin\orawpcom.dll';Running comwrap.sql and ExcelSolution.sql .....
SQL> conn scott@orclsb
Enter password: *****
Connected.
SQL> @c:\comwrap.sql
drop library utils_lib
ERROR at line 1:
ORA-04043: object UTILS_LIB does not exist
Library created.
drop package ORDCOM
ERROR at line 1:
ORA-04043: object ORDCOM does not exist
drop TYPE OAArgTable
ERROR at line 1:
ORA-04043: object OAARGTABLE does not exist
Type created.
drop TYPE OAArgTypeTable
ERROR at line 1:
ORA-04043: object OAARGTYPETABLE does not exist
Type created.
drop function OAgetNumber
ERROR at line 1:
ORA-04043: object OAGETNUMBER does not exist
Function created.
drop function OAgetStr
ERROR at line 1:
ORA-04043: object OAGETSTR does not exist
Function created.
drop function OAgetBool
ERROR at line 1:
ORA-04043: object OAGETBOOL does not exist
Function created.
drop function OAsetNumber
ERROR at line 1:
ORA-04043: object OASETNUMBER does not exist
Function created.
drop function OAsetString
ERROR at line 1:
ORA-04043: object OASETSTRING does not exist
Function created.
drop function OAsetBoolean
ERROR at line 1:
ORA-04043: object OASETBOOLEAN does not exist
Function created.
drop function OAInvokeDouble
ERROR at line 1:
ORA-04043: object OAINVOKEDOUBLE does not exist
Function created.
drop function OAInvokeBoolean
ERROR at line 1:
ORA-04043: object OAINVOKEBOOLEAN does not exist
Function created.
drop function OAInvokeString
ERROR at line 1:
ORA-04043: object OAINVOKESTRING does not exist
Function created.
drop function OACreate
ERROR at line 1:
ORA-04043: object OACREATE does not exist
Function created.
drop function OADestroy
ERROR at line 1:
ORA-04043: object OADESTROY does not exist
Function created.
drop function OAGetLastError
ERROR at line 1:
ORA-04043: object OAGETLASTERROR does not exist
Function created.
drop function OAQueryMethods
ERROR at line 1:
ORA-04043: object OAQUERYMETHODS does not exist
Function created.
Package created.
Package body created.
SQL>
SQL> @c:\ExcelSolution.sql
drop package ORDExcel
ERROR at line 1:
ORA-04043: object ORDEXCEL does not exist
Package created.
Package body created.
SQL>
I have modified ORDExcel a little bit and renamed it as ORDExcelSB. You need this version for reading the excel.
SQL> @C:\ExcelSolutionSB.sql
Package dropped.
Package created.
Package body created.
SQL> The actual code of ORDExcelSB (ExcelSolutionSB.sql) Is:
set serveroutput on;
drop package ORDExcelSB;
CREATE PACKAGE ORDExcelSB AS
   /* Declare externally callable subprograms. */
   FUNCTION CreateExcelApplication(servername VARCHAR2) RETURN binary_integer;
   FUNCTION OpenExcelFile(filename VARCHAR2, sheetname VARCHAR2) RETURN binary_integer;
   FUNCTION CreateExcelWorkSheet(servername varchar2) return binary_integer;
   FUNCTION InsertData(range varchar2, data binary_integer, type varchar2) return binary_integer;
   FUNCTION InsertDataReal(range varchar2, data double precision, type varchar2) return binary_integer;
   FUNCTION GetDataNum(range varchar2) return binary_integer;
   FUNCTION GetDataStr(range varchar2) return varchar2;
   FUNCTION GetDataReal(range varchar2) return double precision;
   FUNCTION GetDataDate(range varchar2) return date;
   FUNCTION InsertData(range varchar2, data varchar2, type varchar2) return binary_integer;
   FUNCTION InsertData(range varchar2, data Date, type varchar2) return binary_integer;
   FUNCTION InsertChart(xpos binary_integer, ypos binary_integer, width binary_integer,
                              height binary_integer, range varchar2, type varchar2) return binary_integer;
   FUNCTION SaveExcelFile(filename varchar2) return binary_integer;
   FUNCTION ExitExcel return binary_integer;
END ORDExcelSB;
CREATE PACKAGE BODY ORDExcelSB AS
   DummyToken          binary_integer;
   applicationToken binary_integer:=-1;
   WorkBooksToken     binary_integer:=-1;
   WorkBookToken     binary_integer:=-1;
   WorkSheetToken     binary_integer:=-1;
   WorkSheetToken1     binary_integer:=-1;
   RangeToken          binary_integer:=-1;
   ChartObjectToken     binary_integer:=-1;
   ChartObject1          binary_integer:=-1;
   Chart1Token          binary_integer:=-1;
   i                    binary_integer;
   retNum               binary_integer;
   retReal               double precision;
   retStr               varchar2(255);
   retDate               DATE;
error_src varchar2(255);
error_description varchar2(255);
error_helpfile varchar2(255);
error_helpID binary_integer;
FUNCTION CreateExcelApplication(servername VARCHAR2) RETURN binary_integer IS
BEGIN
    dbms_output.put_line('Creating Excel application...');
    i := OrdCOM.CreateObject('Excel.Application',
                             0,
                             servername,
                             applicationToken);
    IF (i != 0) THEN
      ORDCOM.GetLastError(error_src,
                          error_description,
                          error_helpfile,
                          error_helpID);
      dbms_output.put_line(error_src);
      dbms_output.put_line(error_description);
      dbms_output.put_line(error_helpfile);
    END IF;
    dbms_output.put_line('Invoking Workbooks...');
    i := ORDCOM.GetProperty(applicationToken,
                            'WorkBooks',
                            0,
                            WorkBooksToken);
    IF (i != 0) THEN
      ORDCOM.GetLastError(error_src,
                          error_description,
                          error_helpfile,
                          error_helpID);
      dbms_output.put_line(error_src);
      dbms_output.put_line(error_description);
      dbms_output.put_line(error_helpfile);
    END IF;
    RETURN i;
END CreateExcelApplication;
FUNCTION OpenExcelFile(filename VARCHAR2, sheetname VARCHAR2)
    RETURN binary_integer IS
BEGIN
    dbms_output.put_line('Opening Excel file ' || filename || ' ...');
    ORDCOM.InitArg();
    ORDCOM.SetArg(filename, 'BSTR');
    i := ORDCOM.Invoke(WorkBooksToken, 'Open', 1, DummyToken);
    IF (i != 0) THEN
      ORDCOM.GetLastError(error_src,
                          error_description,
                          error_helpfile,
                          error_helpID);
      dbms_output.put_line(error_src);
      dbms_output.put_line(error_description);
      dbms_output.put_line(error_helpfile);
    END IF;
    dbms_output.put_line('Opening WorkBook');
    i := ORDCOM.GetProperty(applicationToken,
                            'ActiveWorkbook',
                            0,
                            WorkBookToken);
    IF (i != 0) THEN
      ORDCOM.GetLastError(error_src,
                          error_description,
                          error_helpfile,
                          error_helpID);
      dbms_output.put_line(error_src);
      dbms_output.put_line(error_description);
      dbms_output.put_line(error_helpfile);
    END IF;
    dbms_output.put_line('Invoking WorkSheets..');
    i := ORDCOM.GetProperty(applicationToken,
                            'WorkSheets',
                            0,
                            WorkSheetToken1);
    IF (i != 0) THEN
      ORDCOM.GetLastError(error_src,
                          error_description,
                          error_helpfile,
                          error_helpID);
      dbms_output.put_line(error_src);
      dbms_output.put_line(error_description);
      dbms_output.put_line(error_helpfile);
    END IF;
    dbms_output.put_line('Invoking WorkSheet');
    ORDCOM.InitArg();
    ORDCOM.SetArg(sheetname, 'BSTR');
    i := ORDCOM.GetProperty(WorkBookToken, 'Sheets', 1, WorkSheetToken);
    IF (i != 0) THEN
      ORDCOM.GetLastError(error_src,
                          error_description,
                          error_helpfile,
                          error_helpID);
      dbms_output.put_line(error_src);
      dbms_output.put_line(error_description);
      dbms_output.put_line(error_helpfile);
    END IF;
    dbms_output.put_line('Opened ');
    RETURN i;
END OpenExcelFile;
* Invoke the Excel Automation Server and create a Workbook object as
* well as a worksheet object
FUNCTION CreateExcelWorkSheet(servername varchar2) return binary_integer IS
BEGIN
     dbms_output.put_line('Creating Excel application...');
     i:=ORDCOM.CreateObject('Excel.Application', 0, servername,applicationToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     dbms_output.put_line('Invoking Workbooks...');
     /*i:=ORDCOM.Invoke(applicationToken, 'WorkBooks',0, WorkBooksToken);*/
     i:=ORDCOM.GetProperty(applicationToken, 'WorkBooks', 0, WorkBooksToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     dbms_output.put_line('Invoking Add to WorkBooks...');
     ORDCOM.InitArg();
     ORDCOM.SetArg(-4167,'I4');
     i:=ORDCOM.Invoke(WorkBooksToken, 'Add', 1, WorkBookToken);
IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     dbms_output.put_line('Invoking WorkSheets..');
     ORDCOM.InitArg();
     ORDCOM.SetArg('Sheet 1','BSTR');
/*     i:=ORDCOM.Invoke(applicationToken, 'WorkSheets', 1, WorkSheetToken);*/
i:=ORDCOM.GetProperty(applicationToken, 'WorkSheets', 0, WorkSheetToken1);
IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
i:=ORDCOM.Invoke(WorkSheetToken1, 'Add', 0, WorkSheetToken);
IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     return i;
END CreateExcelWorkSheet;
* Invoke the Range method to obtain a range token. Then set the property value
* at the specified range to the data required
FUNCTION InsertData( range varchar2,
                         data binary_integer,
                         type varchar2)
                         RETURN binary_integer IS
BEGIN
     ORDCOM.InitArg();
     ORDCOM.SetArg(range, 'BSTR');
     i:=ORDCOM.GetProperty(WorkSheetToken, 'Range', 1, RangeToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.SetProperty(RangeToken, 'Value', data, type);
     IF (i=0) THEN
           i:=ORDCOM.SetProperty(RangeToken, 'ColumnWidth', 15, 'I2');
     END IF;
     i:=ORDCOM.DestroyObject(RangeToken);
     RETURN i;
END InsertData;
* Invoke the Range method to obtain a range token. Then set the property value
* at the specified range to the data required
FUNCTION GetDataNum( range varchar2)
                         RETURN binary_integer IS
BEGIN
     ORDCOM.InitArg();
     ORDCOM.SetArg(range, 'BSTR');
     i:=ORDCOM.GetProperty(WorkSheetToken, 'Range', 1, RangeToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.GetProperty(RangeToken, 'Value', 0, retNum);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.DestroyObject(RangeToken);
     RETURN retNum;
END GetDataNum;
FUNCTION GetDataReal( range varchar2)
                         RETURN double precision IS
BEGIN
     ORDCOM.InitArg();
     ORDCOM.SetArg(range, 'BSTR');
     i:=ORDCOM.GetProperty(WorkSheetToken, 'Range', 1, RangeToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.GetProperty(RangeToken, 'Value', 0, retReal);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.DestroyObject(RangeToken);
     RETURN retReal;
END GetDataReal;
FUNCTION GetDataStr( range varchar2)
                         RETURN varchar2 IS
BEGIN
     ORDCOM.InitArg();
     ORDCOM.SetArg(range, 'BSTR');
     i:=ORDCOM.GetProperty(WorkSheetToken, 'Range', 1, RangeToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.GetProperty(RangeToken, 'Value', 0, retStr);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.DestroyObject(RangeToken);
     RETURN retStr;
END GetDataStr;
FUNCTION GetDataDate( range varchar2)
                         RETURN Date IS
BEGIN
     ORDCOM.InitArg();
     ORDCOM.SetArg(range, 'BSTR');
     i:=ORDCOM.GetProperty(WorkSheetToken, 'Range', 1, RangeToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.GetProperty(RangeToken, 'Value', 0, retDate);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.DestroyObject(RangeToken);
     RETURN retDate;
END GetDataDate;
FUNCTION InsertData( range varchar2,
                         data DATE,
                         type varchar2)
                         RETURN binary_integer IS
BEGIN
     ORDCOM.InitArg();
     ORDCOM.SetArg(range, 'BSTR');
     i:=ORDCOM.GetProperty(WorkSheetToken, 'Range', 1, RangeToken);
     i:=ORDCOM.SetProperty(RangeToken, 'Value', data, type);
     i:=ORDCOM.DestroyObject(RangeToken);
     RETURN i;
END InsertData;
FUNCTION InsertDataReal( range varchar2,
                         data double precision,
                         type varchar2)
                         RETURN binary_integer IS
BEGIN
     ORDCOM.InitArg();
     ORDCOM.SetArg(range, 'BSTR');
     i:=ORDCOM.GetProperty(WorkSheetToken, 'Range', 1, RangeToken);
     i:=ORDCOM.SetProperty(RangeToken, 'Value', data, type);
     i:=ORDCOM.DestroyObject(RangeToken);
     RETURN i;
END InsertDataReal;
FUNCTION InsertData( range varchar2,
                         data varchar2,
                         type varchar2)
                         RETURN binary_integer IS
BEGIN
     ORDCOM.InitArg();
     ORDCOM.SetArg(range, 'BSTR');
     i:=ORDCOM.GetProperty(WorkSheetToken, 'Range', 1, RangeToken);
     i:=ORDCOM.SetProperty(RangeToken, 'Value', data, type);
     i:=ORDCOM.DestroyObject(RangeToken);
     RETURN i;
END InsertData;
* Insert a chart at the x and y position of the spreadsheet with the desired
* height and width. Then also uses the ChartWizard to draw the graph with data
* in a specified range area with a specified charting type.
FUNCTION InsertChart(xpos binary_integer, ypos binary_integer,
                          width binary_integer, height binary_integer,
                          range varchar2, type varchar2) RETURN binary_integer IS
     charttype binary_integer:= -4099;
BEGIN
     ORDCOM.InitArg();
     i:=ORDCOM.GetProperty(WorkSheetToken, 'ChartObjects', 0, ChartObjectToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     ORDCOM.InitArg();
     ORDCOM.SetArg(xpos,'I2');
     ORDCOM.SetArg(ypos,'I2');
     ORDCOM.SetArg(width,'I2');
     ORDCOM.SetArg(height,'I2');
     i:=ORDCOM.Invoke(ChartObjectToken, 'Add', 4, ChartObject1);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.GetProperty(ChartObject1, 'Chart', 0,Chart1Token);
     ORDCOM.InitArg();
     ORDCOM.SetArg(range, 'BSTR');
     i:=ORDCOM.GetProperty(WorkSheetToken,'Range', 1, RangeToken);
     ORDCOM.InitArg();
     ORDCOM.SetArg(RangeToken, 'DISPATCH');
     IF type='xlPie' THEN
          charttype := -4102;
     ELSIF type='xl3DBar' THEN
          charttype := -4099;
     ELSIF type='xlBar' THEN
          charttype := 2;
     ELSIF type='xl3dLine' THEN
          charttype:= -4101;
     END IF;
     ORDCOM.SetArg(charttype,'I4');
     i:=ORDCOM.Invoke(Chart1Token,'ChartWizard', 2, DummyToken);
     i:=ORDCOM.DestroyObject(RangeToken);
     i:=ORDCOM.DestroyObject(ChartObjectToken);
     i:=ORDCOM.DestroyObject(ChartObject1);
     i:=ORDCOM.DestroyObject(Chart1Token);
     RETURN i;
END InsertChart;
* Save the Excel File. WARNING: Do not specify a filename that already exist
* since there is no graphical context, Oracle would not be able to pop
* out a warning message for existing file. This causes Excel to hang
FUNCTION SaveExcelFile(filename varchar2) return binary_integer IS
BEGIN
     dbms_output.put_line('Saving Excel file...');
     ORDCOM.InitArg();
     ORDCOM.SetArg(filename,'BSTR');
     i:=ORDCOM.Invoke(WorkBookToken, 'SaveAs', 1, DummyToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     RETURN i;
END SaveExcelFile;
* Close the Excel spreadsheet and exit from it
FUNCTION ExitExcel return binary_integer is
BEGIN
     dbms_output.put_line('Closing workbook and quitting...');
     ORDCOM.InitArg();
     ORDCOM.InitArg();
     ORDCOM.SetArg(FALSE,'BOOL');
     dbms_output.put_line('Closing workbook...');
     i:=ORDCOM.Invoke(WorkBookToken, 'Close', 0, DummyToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.DestroyObject(WorkBookToken);
     ORDCOM.InitArg();
     dbms_output.put_line('Closing workbooks...');
     i:=ORDCOM.Invoke(WorkBooksToken, 'Close', 0, DummyToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.DestroyObject(WorkBooksToken);
     i:=ORDCOM.Invoke(applicationToken, 'Quit', 0, DummyToken);
     IF (i!=0) THEN
     ORDCOM.GetLastError(error_src, error_description, error_helpfile, error_helpID);
     dbms_output.put_line(error_src);
     dbms_output.put_line(error_description);
     dbms_output.put_line(error_helpfile);
     END IF;
     i:=ORDCOM.DestroyObject(WorkSheetToken);
     i:=ORDCOM.DestroyObject(WorkSheetToken1);
     i:=ORDCOM.DestroyObject(applicationToken);
     i:=ORDCOM.DestroyObject(ChartObjectToken);
     i:=ORDCOM.DestroyObject(Chart1Token);
     i:=ORDCOM.DestroyObject(ChartObject1);
     i:=ORDCOM.DestroyObject(dummyToken);
     RETURN i;
END ExitExcel;
END ORDExcelSB;
/I have created an excel named as C:\Example.xls.
Name     SlNo     Job     Dept     Salary     Bonus
Saubhik Banerjee     706090     IT Specialist     GBS     100     10
Partha S Mohanty     706091     Pogrmmer     APPS     70     20
Partha Sarkar     889300     Condultant     FIN     200     30
Useless     98009     PM     PM     900     90
SQL> SET SERVEROUT ON
SQL> DECLARE
2
3    v_Name          varchar2(90);
4    v_SlNo          varchar2(100);
5    v_Job           varchar2(200);
6    v_Dept          varchar2(100);
7    v_recon_remark varchar2(50);
8    v_sal_amt_usd   number;
9    v_Bonus_amt_usd number;
10
11    result INTEGER;
12
13    i        binary_integer;
14    filename varchar2(255);
15
16 BEGIN
17
18    filename := 'C:\Example.xls';
19
20    result := ORDExcelSB.CreateExcelApplication('');
21    result := ORDExcelSB.OpenExcelFile(filename, 'Sheet1');
22
23    /* Excluding the header row and reading the first 5 row */
24    FOR n in 2 .. 5 LOOP
25
26      v_Name          := ORDExcelSB.GetDataStr('A' || n);
27      v_SlNo          := ORDExcelSB.GetDataReal('B' || n);
28      v_Job           := ORDExcelSB.GetDataStr('C' || n);
29      v_Dept          := ORDExcelSB.GetDataStr('D' || n);
30      v_sal_amt_usd   := ORDExcelSB.GetDataNum('E' || n);
31      v_Bonus_amt_usd := ORDExcelSB.GetDataNum('F' || n);
32
33      dbms_output.put_line(v_Name || ' ' || v_SlNo || ' ' || v_Job || ' ' ||
34                           v_Dept || ' ' || v_sal_amt_usd || ' ' ||
35                           v_Bonus_amt_usd);
36
37    END LOOP;
38
39    result := ORDExcelSB.ExitExcel();
40 EXCEPTION
41    WHEN OTHERS THEN
42      result := ORDExcelSB.ExitExcel();
43      RAISE;
44 END;
45 /
Creating Excel application...
Invoking Workbooks...
Opening Excel file C:\Example.xls ...
Opening WorkBook
Invoking WorkSheets..
Invoking WorkSheet
Opened
Saubhik Banerjee 706090 IT Specialist GBS 100 10
Partha S Mohanty 706091 Pogrmmer APPS 70 20
Partha Sarkar 889300 Condultant FIN 200 30
Useless 98009 PM PM 900 90
Closing workbook and quitting...
Closing workbook...
Closing workbooks...
PL/SQL procedure successfully completed.
SQL> Although, You haven't asked, but you can use this code to write to excel file (.xls)
DECLARE
CURSOR c1 IS
     SELECT empno, ename, dname, sal, hiredate
     FROM emp e, dept d
     WHERE e.deptno = d.deptno;
error_message varchar2(1200);
n binary_integer:=2;
i binary_integer;
filename varchar2(255);
cellIndex varchar2(40);
cellValue varchar2(40);
cellColumn varchar2(10);
returnedTime varchar2(20);
currencyvalue double precision;
datevalue DATE;
empno binary_integer;
looptext varchar2(20);
error_src varchar2(255);
error_description varchar2(255);
error_helpfile varchar2(255);
error_helpID binary_integer;
begin
filename:='c:\example2.xls';
i:=ORDExcel.CreateExcelWorkSheet('');
i:=ORDExcel.InsertData('A1', 'EmpNo', 'BSTR');
i:=ORDExcel.InsertData('B1', 'Name', 'BSTR');
i:=ORDExcel.InsertData('C1', 'Dept', 'BSTR');
i:=ORDExcel.InsertData('D1', 'Salary', 'BSTR');
i:=ORDExcel.InsertData('E1', 'HireDate', 'BSTR');
For c1_rec IN c1 LOOP
cellColumn:=TO_CHAR(n);
cellIndex:=CONCAT('A',cellColumn);
cellValue:=TO_CHAR(c1_rec.empno);
empno:=cellValue;
i:=ORDExcel.InsertData(cellIndex, empno, 'I2');
cellIndex:=CONCAT('B',cellColumn);
cellValue:=c1_rec.ename;
i:=ORDExcel.InsertData(cellIndex, cellValue, 'BSTR');
cellIndex:=CONCAT('C',cellColumn);
cellValue:=c1_rec.dname;
i:=ORDExcel.InsertData(cellIndex, cellValue, 'BSTR');
cellIndex:=CONCAT('D',cellColumn);
cellValue:=c1_rec.sal;
currencyValue:=cellValue;
i:=ORDExcel.InsertData(cellIndex, currencyValue, 'CY');
cellIndex:=CONCAT('E',cellColumn);
dateValue:=c1_rec.hiredate;
i:=ORDExcel.InsertData(cellIndex, dateValue, 'DATE');
n:=n+1;
END LOOP;
i:=ORDExcel.SaveExcelFile(filename);
i:=ORDExcel.ExitExcel();
EXCEPTION
WHEN OTHERS THEN
i:=ORDExcel.ExitExcel();
RAISE;
END;

How to load a java file into Oracle?

Hello,
I have some problem in loading a java file into Oracle 8i. I used "loadjava -user <userName/Password> -resolve <javaClassName>" command.
JAVA Version used JDK 1.5
When calling this class file from a trigger gives this error
ORA-29541: class ANTONY1.DBTrigger could not be resolved.
Can anyone help me to resolve this problem?

Hello,
Which username did you use to load the class, and which user is running the trigger?
The default resolver searches only the current user's schema and PUBLIC so the java class needs to be loaded into one of these.
cheers,
Anthony

Loading data from .csv file into Oracle Table

Hi,
I have a requirement where I need to populate data from .csv file into oracle table.
Is there any mechanism so that i can follow the same?
Any help will be fruitful.
Thanks and regards

You can use Sql Loader or External tables for your requirement
Missed Karthick's post ...alredy there :)
Edited by: Rajneesh Kumar on Dec 4, 2008 10:54 AM

How to load XML files into oracle

I am new to XML.I have a few XML files.I want to load them into oracle.I have oracle client on my win2000 machine version 8.1.6.3.
I cannot find Loadjava.jar file in ORACLE_HOME\bin directory.
Where is the XSU-dsl and the XDK utility?Do i need to down load it?

This forum is dedicated to the XML Features of 9iR2, and to a lesser extent 9i. Questions related to XML and earlier versions of the database should be posted in Technologies -> General -> XML...
I will move this thread to the appropriate forum if required.

SQL Loader - Loading Text File into Oracle Table that has carriage returns

Hi All,
I have a text file that I need to load into a table in Oracle using SQL Loader. I'm used to loading csv or comma delimited files into Oracle so I'm not sure what the syntax is when it comes to loading a text file that essentially has one value per row and each row is separated by a carriage return. So when you open the text file, the records look like this:
999999999 <CRLF>
888888889 <CRLF>
456777777 <CRLF>
456555535 <CRLF>
345688888 <CRLF>
So each row is separated by a hard return and I need to tell sql loader that the hard return or next row is the next value to insert into the table. Below is an example of a control file I tend to use as a template for loading csv files but I need to modify it to accomodate this new structure.
OPTIONS (DIRECT=TRUE,ROWS=100000)
UNRECOVERABLE
LOAD DATA
INFILE 'C:\input.txt'
BADFILE 'C:\input.bad'
APPEND
INTO TABLE TEST_TABLE
FIELDS TERMINATED BY ","
TRAILING NULLCOLS
COLUMN_1
How to I modify the control file above to use hard returns as the field/row delimiter for my text file?
Thanks

Hi there,
Obviously my intention wasn't to post the same message 4 times....I pressed the "Submit Message" button but the submission hung and I pressed it a few times and finally it worked but it created several versions of my post. You need to allow users the ability to delete there own postings...I was looking for this option but didn't have it.
Sorry

Load XML file into oracle xml buffer

Hi guys,
I'm a starter in Oracle XML Development, I wander how I can load a xml file into oracle xml buffer(xmlctx* document) through programming with c++ in visual studio.
When I use orastream structure, it compiled failed.
Thank you very much!
Edited by: pomelo on 2010-11-15 下午5:39

try this
LOAD DATA
INFILE '/home/oraread/'
INTO TABLE xmlloadtable
(id,
file_name filler,
data_xml lobfile(file_name) terminated by eof
)you can add the file_name field as a column to your table between the id and xml column and remove the filler word in the .ldr file if you need to keep the name of the file

Load flat file into oracle with SQL Loader

Hi All,
Oracle 9i
I want to load flat file into oracle with the help of sqlloader but I want to skip some columns from flat file.
Can anyone tell me how can we skip column from flat file , I can’t open flat file into excel as CSV due to large volume
Does anyone has any solution for the same.
Umesh Goel

Filler can be use when we want to skip database table column or we want to put null in database table column
but if we have 10 column in flat file and we want to load 1,2,5,7 number column from flat file
then I think filler will not work
If yes then plz let me know.
thx
UG

"Load Files into Photoshop Layers" persistent misalignment problem

I'm having a persistent problem which technical support was unable to resolve after being on the phone with them for 1.5 hrs.
I'm working in Bridge CC in ACR, synchronizing all parameters incl. crop, transform, exposure, etc. of a bracketed group of images shot from a solid tripod. When using the Tools / Photoshop / Load files into Photoshop layers command, the images open in photoshop in a layered file, BUT some are knocked out of alignment. Actually they have been cropped slightly smaller than the original file, always by the same number of pixels. Sometimes all layers are affected, sometimes not. Photoshop and Bridge are both up to date, as is the camera raw plugin. I’m on a new iMac i7 4-core, OSX 10.9.4. All software was newly downloaded from Adobe less than two weeks ago. I have reset preferences, even uninstalled and reinstalled Bridge CC 6.1.0.115 to no avail. Any suggestions?

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

"Load files into Photoshop layers" fails to complete CS6

Hi all,
Hoping someone can help with the folling problem with Photoshop & Bridge CS6
When in Bridge, after selecting 6 images (CR2) using the command TOOLS>LOAD FILES INTO PHOTOSHOP LAYERS the first file will load into Photoshop, Photoshop will then generate a second blank layer and then read the second file. At this point the "script" will stop. I am left with a document with 2 layers. The top layer has my first image, the bottom layer is empty.
At this point when I quit Photoshop I am prompted to save this open document which appears to be the only open document. I choose not to save this as a file. I then get a dialogue box prompting to save another open document. Photoshop has loaded the second file to place as a layer but as the "script" has aborted I am left with an open, but invisible file.
When I first loaded CS6 on Snow Leopard, it would demonstrate this behaviour every time I attempted to run this command from Bridge.
I did a clean install on a blank HDD of OSX Lion. Installed CS6. The command worked without fail for about a month.
Then I would get the command aborting occasionally. Restarting Photoshop would let me continue for a few hours before this aborted script problem would happen again.
Over the last week it has become more frequent, to a point where this workflow is unusable.
A restart of Photoshop may fix the problem for the next batch of images, only to fail again soon after, or fail on the first attempt after a relaunch of Photoshop.
A reboot of my computer will allow my to load one or two sets of files before again failing to complete the command.
I have tried the following:
In Photoshop preferences:
disabling the "Use graphics Processor"
Increasing or decreasing the amount of RAM available to Photoshop
Changing the cache levels or changing the cache tile size
changing the scratch disk
Trashing the Photoshop preferences file (Photoshop Settings.psp)
In Bridge
Purging the cache
Increasing or decreasing the cache size
Resetting Bridge preferences (holding Command on launch) and deleting all cache files.
In general system
Quitting extra programs (Safari, Thunderbird, iTunes)
Sometimes this will seem to then allow Photoshop to load a full set of images, only to abort again after a few sets.
Rebooting the computer - again will work for a few images sets before again failing.
Now the fact that it worked fine for several weeks without presenting a problem would indicate that it is not a bug.
The fact that is slowly started happening then became more frequent would indicate something changing slowly over time - a larger cache folder perhaps, although purging known Bridge cache folders has not filed the problem.
Really at the end of my tether here. Even considering downgrading to CS5 - but don't want to have to use the older Adobe Camera Raw.
System is as follows:
Mac Pro 2 x 2.66 Quad Core
24GB RAM
ATI Radeon HD 4870 512
OSX Lion 10.7.4
I have seen a couple of others have posted having a the same problem, both with CS5 and CS6.
Hoping someone has an answer.
Thanks.

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

I am trying to import BPM Project.zip file into Oracle enterpriserepository

I am trying to import BPM Project.zip file into Oracle enterpriserepository from admin tab.
I am getting the following exception. please help if any one know the solution.
Performing import...
Import Failed: Error [100]: An unknown server-side error occurred. Please record stack trace (if available) and contact technical support.
com.flashline.exception.LoggableException: trouble parsing file in import bundle: SampleWScall/activityGuide.agdl
     at com.flashline.cmee.openapi.service.subsystem.impexp.XMLTranslator.decode(XMLTranslator.java:157)
     at com.flashline.cmee.openapi.service.subsystem.impexp.ImportJob.doJob(ImportJob.java:74)
     at com.flashline.cmee.openapi.service.subsystem.impexp.AbstractJob.perform(AbstractJob.java:75)
     at com.flashline.cmee.openapi.service.subsystem.impexp.JobThread.run(JobThread.java:41)
Audit results stored in:
C:\Users\AVINAS~1.YEL\AppData\Local\Temp\import-4705112223687937017.log
Audit for [Import job.] created on [2012-09-24 11:53:59 IST].
2012-09-24 11:53:59 IST - Adding Import job with ID=[50403] to job queue.
Thanks in Advance.

Hi
Why are you trying to import BPM zip file are you trying to configure the out of the box workflows?
They are something that need to be deployed from the process admin on BPM.
There would be the .exp file you would need as its BPM 10g that you would need to use.

How to insert a image file into oracle database

hi all
can anyone guide me how to insert a image file into oracle database now
i have created table using
create table imagestore(image blob);
but when inserting i totally lost don't know what to do how to write query to insert image file

Hi I don't have time to explain really, I did have to do this a while ago though so I will post a code snippet. This is using the commons file upload framework.
Firstly you need a multi part form data (if you are using a web page). If you are not using a web page ignore this bit.
out.println("<form name=\"imgFrm\" method=\"post\" enctype=\"multipart/form-data\" action=\"FileUploadServlet?thisPageAction=reloaded\" onSubmit=\"return submitForm();\"><input type=\"FILE\" name=\"imgSource\" size='60' class='smalltext' onKeyPress='return stopUserInput();' onKeyUp='stopUserInput();' onKeyDown='stopUserInput();' onMouseDown='noMouseDown(event);'>");
out.println("   <input type='submit' name='submit' value='Submit' class='smalltext'>");
out.println("</form>"); Import this once you have the jar file:
import org.apache.commons.fileupload.*;Now a method I wrote to upload the file. I am not saying that this is correct, or its the best way to do this. I am just saying it works for me.
private boolean uploadFile(HttpServletRequest request, HttpSession session) throws Exception {
        boolean result = true;
        String fileName = null;
        byte fileData[] = null;
        String fileUploadError = null;
        String imageType = "";
        String error = "";
        DiskFileUpload fb = new DiskFileUpload();
        List fileItems = fb.parseRequest(request);
        Iterator it = fileItems.iterator();
        while(it.hasNext()){
            FileItem fileItem = (FileItem)it.next();
            if (!fileItem.isFormField()) {
                fileName = fileItem.getName();
                fileData = fileItem.get();
                // Get the imageType from the filename extension
                if (fileName != null) {
                    int dotPos = fileName.indexOf('.');
                    if (dotPos >= 0 && dotPos != fileName.length()-1) {
                        imageType = fileName.substring(dotPos+1).toLowerCase();
                        if (imageType.equals("jpg")) {
                            imageType = "jpeg";
        String filePath = request.getParameter("FILE_PATH");
        session.setAttribute("filePath", filePath);
        session.setAttribute("fileData", fileData);
        session.setAttribute("fileName", fileName);
        session.setAttribute("imageType", imageType);
        return result;
     } And now finally the method to actually write the file to the database:
private int writeImageFile(byte[] fileData, String fileName, String imageType, String mode, Integer signatureIDIn, HttpServletRequest request) throws Exception {
        //If the previous code found a file that can be uploaded then
        //save it into the database via a pstmt
        String sql = "";
        UtilDBquery udbq = getUser(request).connectToDatabase();
        Connection con = null;
        int signatureID = 0;
        PreparedStatement pstmt = null;
        try {
            udbq.setUsePreparedStatements(true);
            con = udbq.getPooledConnection();
            con.setAutoCommit(false);
            if((!mode.equals("U")) || (mode.equals("U") && signatureIDIn == 0)) {
                sql = "SELECT SEQ_SIGNATURE_ID.nextval FROM DUAL";
                pstmt = con.prepareStatement(sql);
                ResultSet rs = pstmt.executeQuery();
                while(rs.next()) {
                   signatureID = rs.getInt(1);
                if (fileName != null && imageType != null) {
                    sql = "INSERT INTO T_SIGNATURE (SIGNATURE_ID, SIGNATURE) values (?,?)";
                    InputStream is2 = new ByteArrayInputStream(fileData);
                    pstmt = con.prepareStatement(sql);
                    pstmt.setInt(1, signatureID);
                    pstmt.setBinaryStream(2, is2, (int)(fileData.length));
                    pstmt.executeUpdate();
                    pstmt.close();
                    con.commit();
                    con = null;
            if(mode.equals("U") && signatureIDIn != 0) {
                signatureID = signatureIDIn.intValue();
                if (fileName != null && imageType != null) {
                    sql = "UPDATE T_SIGNATURE SET SIGNATURE = ? WHERE SIGNATURE_ID = ?";
                    InputStream is2 = new ByteArrayInputStream(fileData);
                    pstmt = con.prepareStatement(sql);
                    pstmt.setBinaryStream(1, is2, (int)(fileData.length));
                    pstmt.setInt(2, signatureID);
                    pstmt.executeUpdate();
                    pstmt.close();
                    con.commit();
                    con = null;
        } catch (Exception e) {
            con = null;
            throw new Exception(e.toString());
        return signatureID;
   }

Saving a PDF or DOC file into Oracle 9i using Developer Forms 10g

Hi guys,
I want to save a pdf or doc file into oracle 9i. I am using Developer 10 g. Please help me;
1. What datatype field should be in database table to store such file.
2. Which code should I use in Forms 10g to display open file dialog, get the name and save that into database table.
Thanks in advance

WEBUTIL is a library used with forms to interact with the client. With Forms10G the library comes shipped with the developer suite, for forms 9i i'm not sure, check the forms-page at otn if there is any download available. For documentation about how to do a file-upload, simply search the forum, there are lots of examples.

MISALIGNMENT PROBLEMS USING "LOAD FILES INTO PHOTOSHOP LAYERS" FROM BRIDGE CC

I'm having a persistent problem which technical support was unable to resolve after being on the phone with them for 1.5 hrs. I was told the issue would be escalated... That was five days ago, and I've heard nothing.
Here is the problem: In ACR working on a bracketed group of five images shot from a solid tripod in Bridge CC. I carefully synchronize all parameters incl. crop, transform, exposure, etc. Then I go to Tools / Photoshop / Load files into Photoshop layers, and the images open in photoshop in a layered file..., BUT some are knocked out of alignment. Actually they have been cropped slightly smaller than the original file, always by the same number of pixels. Sometimes all layers are affected, sometimes not.
Photoshop CC & Bridge CC are both up to date, as is the camera raw plugin. I’m on a new iMac i7 4-core, OSX 10.9.4. All software was newly downloaded from Adobe two weeks ago. I have reset preferences, reset tools in Photoshop, even uninstalled and reinstalled Bridge CC 6.1.0.115 all to no avail. Any suggestions? I am desperate for some help.

I run Windows 7 Ultimate, I have 2.00GB of RAM with 1.74 usable, and I selected 40 images, each about 2MB.

Load file into Oracle without staging area

Similar Messages

Maybe you are looking for