Loading exe file using loadMovieNum

I have converted SWF into EXE using SWF Studio 2.2 to be able
to run flash
without havinf a FLASH player installed.
It works fine except one feature. On clicking a picture it is
supposed to
load another movie using loadMovieNum()
That other movie is too converted to EXE and loadMovieNum is
called as
loadMovieNum(another_movie.exe,0) which loads nothing though
another_movie.exe is in the same folder as another_movie.swf
which loads
fine. I indicated the absolute path to another_movie.exe like
"c:/folder1/folder2/another_movie.exe" - no joy.
Does this mean that loadMovieNum loads SWF only and cannot be
used to load
EXE. If this is the case, how do I get round this?

Thanks. Do you mean that the main exe file will serve as a
projector for swf
loaded into it?
"the fleece" <[email protected]> wrote in
message
news:e6ov3j$gse$[email protected]..
> no, you cant load up an exe.
> but you dont have to, its just the main file that needs
to be and exe,
export the others as swf

Similar Messages

Loading Captivate files using loadMovieNum

I have a swf that was supplied to me from a client that
exported it from Captivate
I am loading it into another swf using loadMovieNum –
loadMovieNum("file.swf", 10);
When I try to do basic stuff with it such as –
_level10.stop(); or
if (_level10._currentframe==_level10._totalframes){– I
am unable to communicate with the loaded capitvate swf.
Why do they not act like regular loaded swfs, and is there
another way I can communicate with it to find out when the swf is
complete.

A SWF is not necessarily a SWF, if you get my drift. It's
possible that what you want to do can't be done, but are you aware
that Captivate has it's own little set of control and navigation
variables (all left over from RoboDemo days).
The
link is right here, though the same page isw found in your
Captivate Help. This URL is linked directly to that document.
Like I said, it may not help, but FWIW . . .
.

How to execute a exe file using javascript on app window.load.

How to execute a exe file using javascript on app window.load.

Hi sb00349044,
As I have already mentioned in multiple replies to your previous questions, the SUMO forums focuses on providing help to end users with usage-questions and issues.
For developer-related questions, please refer to one of the many resources readily available that I have linked to in the past:
* [https://developer.mozilla.org/en-US/Firefox_OS MDN]
* [http://stackoverflow.com/questions/tagged/firefox-os StackOverflow]
* [https://lists.mozilla.org/listinfo Mozilla Mailing Lists]
- Ralph

Load multiple files using the same data load location

has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
any pointers to possible solutions will be helpful

was able to resolve this. the implementation method is as follows
take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

How to run .exe files using SAP

Hi,
How can I run my .exe files using ABAP/4 language? How can I pass parameters to my executable? Is there any documentation related with my question?
Thanks.

Here is how you can run a .exe from your ABAP. I don't know how you would pass parameters.
report zrich_0001
       no standard page heading
       line-size 300.
data:
           ifile_table type table of file_table,
           xfile_table type file_table,
            return type i..
parameters: p_app type file_table-filename
          default 'C:'.
at selection-screen on value-request for p_app.
clear ifile_table. refresh ifile_table.
call method cl_gui_frontend_services=>file_open_dialog
   exporting
      window_title       = 'Get App'
      multiselection     = space
   changing
      file_table         = ifile_table
      rc                 = return
   exceptions
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      others                  = 4.
read table ifile_table into xfile_table index 1.
if sy-subrc = 0.
    p_app = xfile_table.
endif.
start-of-selection.
data: app type string.
app = p_app.
call method cl_gui_frontend_services=>execute
    exporting
      application            = app.
Regards,
Rich Heilman

Packaging an AIR application in a .EXE file using ADT

Hi All,
I have to package a .AIR file in .exe file with ADT.
Is it possible setting a default installation path in exe file using ADT tool?
I would like to create a .exe file where user can't interact with installation wizard to set a particular path.
Does it exist a particular option?
Would you suggest an example?
(...adt -package -target native ??? myApp.exe myApp.air)
Thanks in advance
Gianni

Hi All,
I have to package a .AIR file in .exe file with ADT.
Is it possible setting a default installation path in exe file using ADT tool?
I would like to create a .exe file where user can't interact with installation wizard to set a particular path.
Does it exist a particular option?
Would you suggest an example?
(...adt -package -target native ??? myApp.exe myApp.air)
Thanks in advance
Gianni

How to run exe file using oracles procedure (ASAP) ?

i am finding difficulties in running an exe file using an oracle procedure.I need this for a pure .NET application

I want the solution for both,An Oracle stored procedure cannot generally run an executable on the client machine. Stored procedures run on the server and have no access to your client machine. You could potentially do something convoluted like run a web server on the client with an ASP page that called the executable and have the stored procedure make a UTL_HTTP call to the ASP page, but that's generally not an option.
If the executable is on the server and it's only available as an executable, you could write a Java stored procedure that called out to the command line and invoked the executable (assuming the operating system user running the Oracle database has permission to do so). If the Oracle database is on Windows and you've got 10.2, you may also be able to write a .Net stored procedure that would do the same sort of thing.
If you can expose the functionality as a DLL, a more elegant solution would be to use an external procedure.
Justin

I am unable to load GRAPHIC files using the transaction SFP.

I am unable to load GRAPHIC files using the transaction SFP.
The error message says that there is no connection to the below given url.
http://<hostname:8000>/sap/bc/fp/
is it something like i have to activate this service in transaction sicf ?

Try http://<hostname:8000>/sap/bc/fp/!
! at the end ..
Regards
Juan

Can I load gMax files using Java3D?

Can I load gMax files using Java3D?
I need to know this if I am going to use Java for my project.

What format are the files in? Can you export as .3ds? If you can, there are loaders for these files.
There are also loaders available for VRML, Obj, etc - see what you can export the file as.

Error while loading xml files using JDBC

Hi,
I am trying to load xml files into an xmltype table using JDBC calls and am getting this error for some files
LPX-00200: could not convert from encoding UTF-8 to UCS2
The xml files and our database are both UTF-8 encoded. The version of oracle that we have here is 9.2.0.6
Any suggestions in this matter will be greatly appreciated.
Thanks,
Uma

I also experienced this problem and unfortunately this solution didn't work for me given that the tag you suggested was already on the XML file.

Issue in How-To document "Load flat file using SAPGUI"?

Hi,
I'm having an issue with following lines in the How-To document.
I've a characteristic "CHAR1" which is restricted with multuple values in the planning level.
after the upload using this document, CHAR1 is being loaded incorrect & during my debugging I've noticed that program is changing CHAR1 values while executing following lines of code.
It works fine, if i don't have a restriction for CHAR1 at planning level.
It also works fine, if i restricted CHAR1 with a single value in level.
It's not working as expected, if i restrict CHAR1 with multiple single values.
incase of multiple single values restriction, following is happening.
let's say i load following file & i restricted CHAR1 with values "aaaaa,fffff" in level.
CHAR1 CHAR2 value
aaaaa bbbbb 1000
fffff eeeee 2000
it's being loaded as follows. Program is changing all values of CHAR1 with 1st value of the restricted multiple values and in this case, it is "aaaaa".
CHAR1 CHAR2 value
aaaaa bbbbb 1000
aaaaa eeeee 2000
Has any one encountered the same problem?
Marc,
Could you please comment on this.
>>> INSERT
Set fixed fields
LOOP AT ito_chasel INTO ls_chasel.
READ TABLE ls_chasel-t_charng INTO ls_charng INDEX 1.
IF sy-subrc = 0 AND ls_charng-option = 'EQ'.
ASSIGN COMPONENT ls_chasel-chanm OF STRUCTURE ls_data-s_chas TO <f>.
IF sy-subrc = 0.
<f> = ls_charng-low.
ENDIF.
ENDIF.
ENDLOOP.
<<< INSERT
Appreciate any help.
Hari Immadi
http://immadi.com
SEM BW Analyst

Marc,
I still need to keep the lines of coding as I've few characteristics restrictied to single values & one characteristic restricted to multiple single values.
when the coding is commented out, single value restricted characteristics are not getting populated with any value.
I'm counting the table entries "ls_chasel-t_charng" and if entries are 1, then am activating the code. this seems to be working fine. Do you see any problems/issues with this?
Hari Immadi
http://immadi.com
SEM BW Analyst

Loading accdb file using for each loop in to single target table

I have 3 accdb file as below in single folder, in control flow I have created a for each loop to loop through all the below file. In dataflow task I have created oledb source using connection manager to point to first file a1.accdb. I am trying
to load all the file into single below mentioned target table, here It is only loading first file it is not looping through other two file.
This I have tried to load .txt files and csv files it is working perfectly but similarly when I try to load access db file table it is not working, can any one of you help me?
1. a1.accdb contains only one table a1tab ( col1 col2 col3 )
2. a2.accdb contains only one table a2tab ( col1 col2 col3 )
3. a3.accdb contains only one table a3tab ( col1 col2 col3 )
I have a target table with similar structure as source
Target table <TargetTable> Col1 Col2 Col3
aak

Thanks Arthur, please find below response
How do you handle the different table names? Cant we handle it in a similar manner, how we handle the .csv/.txt files with different name and similar structure for sources(multiple files) and target (single table)
Is it good to drop the idea of for each loop and create a separate task for each accdb file? to be loaded to same target table( performance wise etc.. any justification would be helpful)
You must handle the connection string dynamically?
Can you help me with the logic for handling connection string dynamically
aak

Loading xml file using owb

Hi Gurus,
I am new to owb and as per requirement we need to load xml files into oracle table using owb.
below is the xml file:
<bookstore>
<book category="COOKING">
<title lang="en">Everyday Italian</title>
<author>Giada De Laurentiis</author>
<year>2005</year>
<price>30.00</price>
</book>
<book category="CHILDREN">
<title lang="en">Harry Potter</title>
<author>J K. Rowling</author>
<year>2005</year>
<price>29.99</price>
</book>
<book category="WEB">
<title lang="en">Learning XML</title>
<author>Erik T. Ray</author>
<year>2003</year>
<price>39.95</price>
</book>
</bookstore>
please help me in loading above xml file using owb.

You can leverage the XML SQL functions to extract from XML using the database, see the blog post below;
https://blogs.oracle.com/warehousebuilder/entry/leveraging_xdb
For example to extract information from your XML document the following SQL can be generated from OWB;
select extractValue(value(s), '/book/author'),
extractValue(value(s), '/book/year'),
extractValue(value(s), '/book/price') from
( select XMLType('<bookstore>
+<book category="COOKING">+
+<title lang="en">Everyday Italian</title>+
+<author>Giada De Laurentiis</author>+
+<year>2005</year>+
+<price>30.00</price>+
+</book>+
+<book category="CHILDREN">+
+<title lang="en">Harry Potter</title>+
+<author>J K. Rowling</author>+
+<year>2005</year>+
+<price>29.99</price>+
+</book>+
+<book category="WEB">+
+<title lang="en">Learning XML</title>+
+<author>Erik T. Ray</author>+
+<year>2003</year>+
+<price>39.95</price>+
+</book>+
+</bookstore>') adoc from dual+) r,
table(XMLSequence(extract(r.adoc, '/bookstore/book'))) s;
Cheers
David

How to create an exe file using labview and arduino?

I bought Arduino Mega 2560. I have installed Arduino IDE 1.7.3. I am using Windows 7 64bit version and Labview 2012. I started working after the compilation of LIFA_Base File with Arduino IDE and with labview.
My application is: I have connected my arduino to my PC via USB for read input/output pins. I have to read all the time an analogue input from arduino and I have to draw the graphical representation of the input. I would like to know if I can create an exe file of this application. I would like to use the created exe file to another PC without labview installation.
Please help me to resolve the problem.
Regards

Yup you sure can. With Application Builder, that is bundled with several LabVIEW packages you can make an EXE, and then make an installer that can include the LabVIEW Run-Time engine (free) and you'll also need the VISA run-time for talking to serial devices like your Arduino.
Then you should be able to run that installer on any normal Windows PC and without the development environment be able to run your program.
Note that currently Student, and Home versions of LabVIEW do not have the application builder since it is intended for learning, and hobbyist, not for distributions.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Problem loading XML-file using SQL*Loader

Hello,
I'm using 9.2 and tryin to load a XML-file using SQL*Loader.
Loader control-file:
LOAD DATA
INFILE *
INTO TABLE BATCH_TABLE TRUNCATE
FIELDS TERMINATED BY ','
FILENAME char(255),
XML_DATA LOBFILE (FILENAME) TERMINATED BY EOF
BEGINDATA
data.xml
The BATCH_TABLE is created as:
CREATE TABLE BATCH_TABLE (
FILENAME VARCHAR2 (50),
XML_DATA SYS.XMLTYPE ) ;
And the data.xml contains the following lines:
<?xml version="2.0" encoding="UTF-8"?>
<!DOCTYPE databatch SYSTEM "databatch.dtd">
<batch>
<record>
<data>
<type>10</type>
</data>
</record>
<record>
<data>
<type>20</type>
</data>
</record>
</batch>
However, the sqlldr gives me an error:
Record 1: Rejected - Error on table BATCH_TABLE, column XML_DATA.
ORA-21700: object does not exist or is marked for delete
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at line 1
If I remove the first two lines
"<?xml version="2.0" encoding="UTF-8"?>"
and
"<!DOCTYPE databatch SYSTEM "databatch.dtd">"
from data.xml everything works, and the contentents of data.xml are loaded into the table.
Any idea what I'm missing here? Likely the problem is with special characters.
Thanks in advance,

I'm able to load your file just by removing the second line <!DOCTYPE databatch SYSTEM "databatch.dtd">. I dont have your dtd file, so skipped that line. Can you check if it's problem with ur DTD?

Loading exe file using loadMovieNum

Similar Messages

Maybe you are looking for