Loading images in a table and show this image in a html form

Hi All,
I'am a newbie in Oracle and PL/SQL.
I need to load a image in a table and restrive this image and show it in a html form. I'd like to use a PL/SQL procedure.
Thanks in advance for any suggestions.

Hi,
This forum is for Oracle9iAS Web Services discussion.
I would recommend that you post your question to the 9iAS - General discussion forum.
Regards,
Tim

Similar Messages

Use loadSWF load my stage3D game swf and show In AIR , This swf may crash when running

Problem Description:
use loadSWF load my stage3D game swf and show , This swf may crash when running
Steps to Reproduce:
run my Upload Project . Fill in the login box, any account and password . Because of network problems, you may need to wait a long time to show up login box
Actual Result:
this swf crash when running
Expected Result:
this swf do not crash when running
Any Workarounds:
Test Configuration
My Hardware and Environment details:
1.this url's swf load files in worker
2.this url's swf use SDK is Flex 4.6.0(bulid23201)
3.this url's swf is Flex Project
Upload Project Url:
http://fight.fuhuodao.com/fight/testUrl/!FightAirShell.zip

The loading of SWFs from AIR has a different Security model than that of the WebPlayer. There is a workaround to loading plugins in AIR: If you use a static plugin this should work for you. To do this: Link in the plugin at compile time, and pass the PluginInfoResource to the loadPlugin() method.

How to count records from 2 tables and show in RDLC Report

hi all,
its being a one day searching for the solution but No Luck.
I have two SQL tables tblstudetail and tblfeereceiptdetail.
i just want to count records from both tables and show in RDLC report.
I tried SQl Query Like This:
select a.session, a.course,
Count(CASE a.ADstatus WHEN 'OK' THEN 1 ELSE 0 END ) AS Admission,
Count(CASE s .I_receiptstatus WHEN 'OK' THEN 1 ELSE 0 END) AS Feeprint
from
tblstudetail a
FULL join
tblfeereceiptdetail s on s.studentID = a.studentID
where a.session = '2015' AND s.Fsession = '2015' AND a.adcat = 'Regular'
GROUP BY a.session,a.course
ORDER by a.course
The result Show the Same Value in Both columns
Session    Course      Admission       FeeDetail
2015          B.A. I               275              275
2015          B.A. II              307             307
2015         B.A. III             255            255
2015          B.Sc. I             110             110
2015   B.Sc. II           105            105
2015          B.Sc. III            64               64
Actully I want to Count How many ADMISSION have been Taken(FROM tblstudetail) and How many FEE RECEIPT have been Print (From tblfeereceiptdetail).
please guide me for this as soon as possible.
thanks in advance...

I am counting 'OK' in both the table columns I.e 'ADstatus' in tblstudetail and 'feereceiptstatus' in tblfeereceiptdetail
please suggest me

Hide and Show - Toggle image

Hi:
Okay - I admit it! I am completely baffled.
I am trying to use custom "click" images for my hide and show region. I am using a modified version of Theme 20 in Apex 4.0.
I have created two little images, one for open state and one for closed. I have managed to get the "open" image to display and it is clickable and the region closes, but the image does not toggle.
In the region template, I find the following:
onclick="htmldb_ToggleWithImage(this,'#REGION_STATIC_ID#_body')"
Clearly, this is to toggle the image. But, how does it know what image to use? Which image to replace the oen state image with. I am not understanding how it selects the second image.
Please, please, can someone explain to me how to get the toggle to work properly with my custom images.
Thanks in advance.
Regards,
Bruce

So, I figured it out myself.
the function htmldb_togglewithimage actually takes the 'puls' string in the image name and changes it to 'minus'. So your images have to be maned something like:
my_image_plus.gif
my_image_minus.gif
without uswoing this maning convention - it will not work.
Bruce

HT2531 Spotlight lists items and shows preview images. BUT what about showing the location address of an item in my computer. Especially important if I've put the item in the wrong folder and what to locate it without multi-steps. iMac OS 10.5 was more u

Spotlight lists items and shows preview images. BUT what about showing the path/location address of an item in my computer.
Especially important if I've put the item in the wrong folder and what to locate it without multi-steps. iMac OS X 10.5 was more useful.
Old OSX Spotlight function automatically displayed path/location within the machine: e.g. desktop/folder/sub-folder/item.
Can I make Spotlight show the path?

Press option-command and the path is displayed at the bottom of the little preview window. Press command-return and the enclosing folder opens.

I want to store an image in R3 table and retrive it

Hi,
i want to store an image in R3 table and retrive it from my function module.
Can any one tell me what is the step by step procedure to do that.
I am new to ABAP.
Regards,
H.V.Swathi

Dear Swethi,
You can move images to SAP using SE78. then u can use them where ever u you require them.
SE78->GRAPHICS->BMAP here give ur image name and click on save
Rgds,
Kiran
Edited by: Kiran on Jun 11, 2009 7:15 AM

I tried to restore my Apple TV. It froze on a connect to iTunes screen and showed an image of a USB cord. Now it is frozen there. Any ideas?

I tried to restore my Apple TV. It froze on a connect to iTunes screen and showed an image of a USB cord. Now it is frozen there. Any ideas?

Did you try restore from teh AppleTV menu connecetd to TV.
If so sounds as though something went wrong.
Hook up to a computer using a micro USB cable alone, run iTunes and select the AppleTV to restore:
http://support.apple.com/kb/HT4367

I deleted my download folder by accident i waz moving it and it just deleted it and showed this smoke. i found it in my trash so put it on my dock then clicked on it and it shows preview?! plz help how do i get it back!!!

i deleted my download folder by accident i waz moving it and it just deleted it and showed this smoke. i found it in my trash so put it on my dock then clicked on it and it shows preview?! plz help how do i get it back!!!

You need to restore the folder using the (Put back) selection (CTRL click).

An i4 MC603ZA cant upgrade iOS from 4.2.1 to 4.3.2 and show "This device isn't eligible for the requested build"

An i4 MC603ZA cant upgrade iOS from 4.2.1 to 4.3.2 and show "This device isn't eligible for the requested build"

Back up your iphone. Erase all content and settings and try to update again. Also on you computer make sure your signed in as the administrator and All antivirus and firewalls are disabled. http://support.apple.com/kb/ts4451

DISM "you do not have permissions to mount and modify this image"

I have tired to mount a vista and 7 WIM to add a service pack, but I keep getting the error "you do not have permissions to mount and modify this image"
I'm running as administrator I'm running from the waik, I was able to mount with readonly permissions but that not what I need.
Louis Ramirez

Thanks Juboori, this solved the issue for me too.
The odd thing though is that the "Read Only" attribute was NOT ticked in the Right-Click Properties windows but it WAS enabled when checking via a DOS command prompt.
How to check in DOS:
"Attrib Install.wim" (you'll see the 'R' attribute is enabled)
How to disable in DOS
"Attrib Install.wim -R" (Removes the 'Read Only' attribute)

My phone is locked and show (this iphone is currently linked to an apple ID sign in with the appleID

my phone is locked and show (this iphone is currently linked to an apple ID sign in with the appleID that was used to set up this iPhone.
i put my Apple ID and password but dosnt work what shoul i do help please

Find My iPhone Activation Lock- Removing a device from a previous owner’s account
You will have to find the person whose Apple ID is currently tied to the phone. Only they can remove the activation lock. If you are unable to find them or they won't remove the lock, then your phone is useless. Take it back to the vendor and get your money back if you can.

How to Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER in VC++ ?

Hi,
I have : - IMAQ1394 2.0.1
              - NI Vision 7.1
In VB, I can Snap/Grab Image from 1394 camera and display the Image in CWIMAQVIEWER :
    Dim Image0 As New CWIMAQImage
    imaq1394SnapCW(sid0,Image0)
    CWIMAQViewer1.Attach Image0
Now,How can I do this in VC++6.0?
    I tried:
              C_CWIMAQImage m_imgViewer1;
              m_imgViewer1 = m_CWIMAQVision1.CreateCWIMAQImage();
              m_CWIMAQViewer1.Attach(m_imgViewer1);
              imaq1394SnapCW(Sid,m_imgViewer1); <--there is no "imaq1394SnapCW "function in VC++,why?
    Please help me!
    Thank you!

For people looking back at these old posts regarding
CWIMAQViewer - it was not made to be used in the C environments and is made
for VB.
Refer to the following locations for displaying images in C
environments:
Start»All Programs»National Instruments»Vision»Documentation
Start»All
Programs»National Instruments»Vision»Text Based Examples
Make
sure that you look at the examples and documentation that is in
reference to the C environments not the VB environments
Vince M
Applications Engineer

Anchored images in a table and I want to re-arrange them?

Hello,
I want to create a storyboard in InDesign, and I am placing a multipage pdf created from a powerpoint, that represents each slide.
Problem is, I want an easy way to add and delete new images(slide representations) and have them flow as I do this.
I have thought about just making each page its own slide and then printing out thumbnails, and that works, as its easy to add, subtract and re-arrange pages in the pages panel. but I was wonding, if I plce each image in a table cell, is there an easy way to make them all flow if I add or subtract additional images?
thanks!
babs

HI Jeffrey!
Well, that was even quicker..nice... I couldn't find any script in there that would scale each page (I think I looked pretty well into all of them), but this works too.
In the end, I just need to be able to constantly move pages around, as if I was in PowerPoint in the slide Sorter, and be able to print out a document that would show the story told through thumbnails. This certainly makes the placement part much quicker.
thanks!!!
babs

Image background in table NOT showing up! ffs

I am not kidding, but I have seriously spent HOURSSSSSSS
trying to figure out why the freakin picture will not show up.
It’s really irritating, and there’s NO reason why it
shouldn’t show up. I made my template in photoshop and slice
it all up. I save it. Then I save the template as a WEB. The thing
saves all the images and creates an editable site.
So I then go into dreamweaver to load up the site.
Everything’s is fine. I have ONE image which is being a pain
to me because everytime I delete it and replace that image as the
background so that I can type in it, the stupid image doesn’t
appear.
The image I’m trying to get to show up is the GOLD
navigation bar image. PLEASE PLEASE Help. It’s for a project
in my webpage design class and I really need help, thanks.
IMAGES BELOW
http://img.photobucket.com/albums/v185/viperjts10/dreamweaver.gif
http://img.photobucket.com/albums/v185/viperjts10/internetexplorer.gif

There are several issues here, not the least of which is that
you are trying to create a web page with a program designed to
create and edit images, then trying to make it work in a program
designed to create web pages.
The proper approach is create your web page in Dreamweaver
(or notepad or what ever you like) then augment it with images
processed in Photoshop (or Fireworks, etc) optimized for the web.
Next, there are several things that could be causing your
problem, but what we really need to see here is a url to your site
so we can examine the code and tell you what might be causing you
trouble. Pictures of the problem in this case are NOT worth a
thousand words.
Please post the address to your site and I’m sure
someone will post the solution pretty quickly.

Home Page loads slowly because of too many show/hide images.

I was asked to create a home page that displayed the correct product image in the background as you mouse over the menu item in the product portfolio navigation. I built the page using quite a few show/hide behaviors displaying the correct image. Now I have a HUGE home page that loads very slowly. Is there a better way to accomplish the same affect or do I need to scrap this idea and keep the images on the individual pages?
You can see this page here: http://www.keystonewalls.com
(mouseover the PRODUCT PORTFOLIO button and scroll down the menu to see the affect)
The client loves the fact that you don't have to leave the home page to get a good idea of what each product looks like but they aren't happy with how long it takes to load.
Help!

Yup. You've got some trimming to do.
http://www.websiteoptimization.com/services/analyze/
On a T1 connection (1.41 MB/sec) your home page takes 18.50 seconds to load. For dial-ups it's a very painful 395 seconds.
Page size: 1,943,483 bytes. Should be closer to 200 KB.
HTTP server requests: 41. This should be around 10.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Loading images in a table and show this image in a html form

Similar Messages

Maybe you are looking for