Loading property files from a class and not a servlet...
Hi, I was wondering if anyone has a good solution for loading property files from a class instead of a servlet. I would like to load the property file similarly to how it is done from HttpServlet.
Here is the large picture. I have a tag library that calls a class which needs to access a database. The class needs to know what DB to access so it needs to look at some property file. The problem is that I don't want to hardcode the properties or the path of where the property file exists. I hope this all makes sense.
Thanks.
-PV
I use the getResource method in the java.lang.Class class. Read about this method in the api.
Anyways this is roughly how it's : you must put your properties file in the classpath. Then in your class :
Properties prop = new Properties();
URL url = this.getClass().getResource("/config/db.properties");
prop.load(url.openStream());In this case, you must put the "config" (where you've written your db.properties file) directory's parent in the classpath.
Similar Messages
-
Infopackage-Load Many Files from Application Server and later Archive/Move
Hi All..
I have a doubt, I have a requirement of take many files to load into BI 7.0.. I used the infopackage before with option:
Load Binary File From Application server
I load information successfully... only with one file ...but If I can load many files (with different names) like the next list.. I think it's not a good idea modify the file name (path) on infopackage each time).. :
*All of this files will be on one server that itu2019s map into AL11.. Like
Infopfw
BW_LOAD_20090120.txt
BW_LOAD_20090125.txt
BW_LOAD_OTHER_1.txt
u2026.
Etc..
This directory it's not in BW server.. It's other server..but I can load form this location (one file by one)
Could you help me with this questions:
- How can I Use an infopackage with routine that take all the files..one by oneu2026 in order of creation dateu2026and load into Target? Is it possible?.. I have some knowledge of ABAP.. but I don´t know exactly how I can say to system this logicu2026
- In addition is it possible move this files to other locationu2026 like into Infopfwarchive u2026 just to have an history of files loaded.
I saw that in infopackage you have an option to create a routine.. in ABAP codeu2026 Iu2019m a little bit confused because I donu2019t know how I can specify all the path..
I try with:
Infopfw
InfopfwFile.csv
Infopfw
This is the abap code that automatically you see and you need to modifyu2026
Create a routine for file name
This routine will be called by the adapter,
when the infopackage is executed.
p_filename =
p_subrc = 0.
Thank you for your ideas or recommendations.
AlHi Reddy, thank you for your answer
I have some doubuts.. when you explain me the option:
All the above files are appending dates at the end of the file....
You can load the files through infopackage by using Routines and pick the files based on date at the end of the file..***
I need to ask you if you think that when you know the date of the file and the infopackage pick each file... thi can work for many files??... or how it's possible control this process?
About this option, I want to ask you If when you menction Unix code... where it's programed this code?.. in the routine of BW Infopackage??
****Or
Create two folders in your BW in Application server level, in AL11 (ask Basis team)
I call it is F1 and F2 folders.
First dump the files into F1 I assume that the file name in F1 is "BW_LOAD_20090120.txt", using Unix code you rename the file and then keep in the same foleder F1 or move to F2.
Then create InfoPackage and fix the file name (i.e. you renamed), so you don't need to change everyday your file name at infopackage level.Because in AL11 everyday the file are overwrite.
To I get BW_LOAD_20090120.txt file in F1, then I renamed to BW_LOAD.txt and loaded into BW, then tomorrow I get BW_LOAD_20090125.txt in F1, then I renamed to BW_LOAD.txt....
so in this way it will work.You need to schedule the Ubix script in AL11.
This is the way how to handle the application server...I'm using the same logic.
Thank you soo much.
Al -
Can't find files from purchased music and not allowed to redownload
I can't not find the files to a album i donwloaded and they will not allow me to redownload them from my purchased files
We're having the exact same problem. Spotlight run on the server will find files, when run from a Leopard client will find files, but when run from a Tiger client results are empty every time.
I think I read somewhere that Leopard indexes are not backwards compatible, I'm going to turn off Spotlight on the server and delete the indexes - we'll see what happens. -
hi, i purchased a 2 dvd digital set. i cant just download it straight to my ipad. they said i have to down load it to my i tunes, then can transfer to i pad. im not seeing how to click the files from my email, and get them into the i tunes acct... ugh.
i do not have a mac home pc. just a regular pcI had the same problem after I gave my old iPad to my parents and tried to install Netflix. This is what you have to do: Open iTunes on your computer, the one you sync your iPad to. Then go to iTunes Store and search for and download Netflix app. After you download it, if your iPad is set to download new purchases it may start downloading on your iPad. If so, tap and hold to delete the app (because it is trying to install the new version on the iPad) Next step, go to the App Store on your iPad and find Netflix and it should say install since you already purchased it on the computer. Tap to install, and it will say the version is not compatible, tap to download a previous version. Click that and it will install the older version! One more thing, if and when you sync to your computer again it will say something like " Unable to install Netflix on your iPad" Just click the box to never remind you again, because it's trying to sync the newer Netflix app to your iPad, but it doesn't work so it displays the message. The old app will remain on the ipad. Hope this helps, good luck
-
Loading XML using a custom class and accessing it from other classes?
I began with a class for a movie clip rollover function
FigureRollOver. It works marvellously. Three things happen:
1) it loads XML from a file "mod1_fig1.xml" and uses another
class, XMLMember, to retool the scoping of the XML so that I can
get at it
2) an onload call inside of XMLMember calls the myOnLoad
function and transfers the XML into an array.
3) so long as the array is finished building, rolling over a
movie clip attaches a new movie clip with the rollover text in it.
But I don't want all those functions in one because I need it
to be more dynamic, starting with being able to load any old xml
file instead of just "mod1_fig1.xml", plus it seems like
overbuilding to have all of that in one class, so I've separated
out the loading of the XML and building of the array into its own
class, FigureXMLLoader. FigureRollOver is then left to just attach
the rollover with text in it, extracted from the array built by the
new class.
Problem is, though the array builds inside FigureXMLLoader, I
can't figure out how to make it available outside the class. I know
that I'm constructing things in the wrong order, and that the array
needs to be somehow built inside the class function to be
available, but I can't figure out how to do that. A cruddy
work-around is to put a function call at the end of the building of
the array, which calls yet ANOTHER function on the main timeline of
my .swf to put the array I've just built into a new variable. This
works, but it's messy. It seems like I should be able to have one
line of script in the .swf that generates an array on the main
timeline (or just a public array) which I can then access from my
FigureRollOver class:
var myRollOvers:Array = new FigureXMLLoader("mod1_fig1.xml");
Here is FigureXMLLoader (see comments in the code for more
details) which obviously does not return an array as it is, because
of all the working around I've had to do. Note the "testing"
variable, which can be traced from the main timeline of the .swf,
but I will get "not what I want" because of course the array hasn't
been built yet, and never will be, inside of the declaration as it
is. How do I get it in there so I can return an array?
Thanks!Suggest you ask this question in the Actionscript forum as
this forum is
more tuned to database integration questions.
You can create arrays outside a class and pass them into it
by reference and
visa versa build arrays inside a class and pass out via
reference.
The preferred approach is to place the array in a class and
not expose it.
Then add methods to use the array or should we say to use the
class.
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"maija_g" <[email protected]> wrote in
message
news:ed4i43$9v0$[email protected]..
> Update: I've now put this on the main timeline of the
.swf:
>
> myRollOversLoaded = false;
> var myRollOvers:Array;
> var roll_content = new FigureXMLLoader("mod1_fig1.xml");
>
> And inside the "myOnLoad" function in FigureXMLLoader,
just after the
> while
> loop I've put this:
>
> _root.myRollOversLoaded = true;
> _root.myRollOvers = figure_arr;
>
> The movie clip rollover won't act until
myRollOversLoaded is true. It
> works,
> but it still seems klugey. Any suggestions for a more
elegant solution
> would be
> appreciated.
> -
When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. please re install of repair the application and try again. I have done this and it's still not working
anomaly jade,
You only need to use the serial number during installation.
Have you, at least seemingly, been able to install, and then you are unable to start up?
If that is the case, you could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful but I can not find the files on the mac. Any ideas?
When you use Migration Assitant it creates another user account and puts your files there. Please log out of your normal account and log into the new account. Had you use Setup Assistant when it asked if you were migrating that would not have occured. You have a couple of options, combine the two accounts (not recommended) or start over, use Setup Assistant and have everything in one user account. Here is a link to Pondin's guide for Lion Setup Assistant tips however if you want to combine the two accounts he has addressed that in
http://pondini.org/OSX/Transfer.html -
How do a scan a file from my scanner and make it a PDF. . . . I do not see this choice in the Adobe program?
In the past I would simply place a copy of the document on my scanner, then selected create PDF from scanner. However, there is now no create PDF from scanner alternative, option or choice. The only option available is selected file to convert to PDF. what am I to do?That would have been a function of your scanning software. Adobe Reader is only used to view the pdf that your scanning software created.
-
Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?
Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06 -
After computer would not boot and could not be repaired, I reformatted the HDD, reinstalled Vista plus all service packs and updates, recovered files from Microsoft backup and installed new copy of Firefox 3.6. Firefox will not run.
I have deleted all old M0zilla profile folders and reinstalled Firefox again to no avail.
After intallation was completed, the automatic startup just placed a small box on the screen "Import wiz". This just sat there with no activity. After I closed this box, none of the Firefox start buttons would open the program -- just the blue rotating icon for about 2 seconds then nothing.Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support -
I can not load RAW files from my nikon d810
I Have a problem Reading RAW files from my nikon d810
Thanks,
Joop
Op 26 jul. 2014 om 17:40 heeft Rikk Flohr <[email protected]> het volgende geschreven:
I can not load RAW files from my nikon d810
created by Rikk Flohr in Photoshop Lightroom - View the full discussion
https://forums.adobe.com/search.jspa?q=D810
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6585986#6585986
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
How to Enable Plugin before File Opened And Load PDF File From memory?
hello everyone,
there have two problems,all i want to do is to show a pdf file encrypted by AES algorithm.
1.one is how to enable plugin before file opened?
i developed another two plugin,and each enabled after one pdf file was opened,and now i want to replace the file open command and can do some word by meself,such as decrypt the pdf ?
2.another is how to load pdf file from memory?
if i can enable plugin before file opened,and than i can read the file and decrypt it,and now i want to do is do load the decrypt file (in memory) into the adobe?
i tried many method,but all in vain.who can help me or give me some advice?
thanks.
merry chrismas to everyone.The proper way to handle other file formats (even where it is really a PDF that has been "wrapped") is to create an AVConversionHandler.
To load a PDF from a source other than the file system, you need to create a custom AVFileSys. -
How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell -
Load XML file from addon domain without cross-domain Policy file
Hello.
Assuming that there are two addon domains on the same server: /public_html/domain1.com and /public_html/domain2.com
I try to load XML file from domain2.com into domain1.com without using cross-domain policy file (since it doesn’t work on xml files in my case).
So the idea is to use php file in order to load XML and read it back to flash.
I’ve found an interesting scripts that seems to do the job but unfortunately I can't get it to work. In my opinion there is somewhere problem with AS3 part. Please take a look.
Here are the AS3/PHP scripts:
AS3 (.swf in www.domain1.com):
// location of the xml that you would like to load, full http address
var xmlLoc:String = "http://www.domain2.com/MyFile.xml";
// location of the php xml grabber file, in relation to the .swf
var phpLoc:String = "loadXML.php";
var xml:XML;
var loader:URLLoader = new URLLoader();
var request:URLRequest = new URLRequest(phpLoc+"?location="+escape(xmlLoc) );
loader.addEventListener(Event.COMPLETE, onXMLLoaded);
loader.addEventListener(IOErrorEvent.IO_ERROR, onIOErrorHandler);
loader.load(request);
function onIOErrorHandler(e:IOErrorEvent):void {
trace("There was an error with the xml file "+e);
function onXMLLoaded(e:Event):void {
trace("the rss feed has been loaded");
xml = new XML(loader.data);
// set to string, since it is passed back from php as an object
xml = XML(xml.toString());
xml_txt.text = xml;
PHP (loadXML.php in www.domain1.com):
<?php
header("Content-type: text/xml");
$location = "";
if(isset($_GET["location"])) {
$location = $_GET["location"];
$location = urldecode($location);
$xml_string = getData($location);
// pass the url encoded vars back to Flash
echo $xml_string;
//cURLs a URL and returns it
function getData($query) {
// create curl resource
$ch = curl_init();
// cURL url
curl_setopt($ch, CURLOPT_URL, $query);
//Set some necessary params for using CURL
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
//Execute the curl function, and decode the returned JSON data
$result = curl_exec($ch);
return $result;
// close curl resource to free up system resources
curl_close($ch);
?>I think you might be right about permissions/settings on the server for php. Unfortunately I'm not allowed to adjust them.
So I wrote my own script - this time I used file path instead of http address of the XML file. It works fine in my case.
Here it is:
XML file on domain2.com:
<?xml version="1.0" encoding="UTF-8"?>
<gallery>
<image imagePath="galleries/gallery_1/images/1.jpg" thumbPath="galleries/gallery_1/thumbs/1.jpg" file_name= "1"> </image>
<image imagePath="galleries/gallery_1/images/2.jpg" thumbPath="galleries/gallery_1/thumbs/2.jpg" file_name= "2"> </image>
<image imagePath="galleries/gallery_1/images/3.jpg" thumbPath="galleries/gallery_1/thumbs/3.jpg" file_name= "3"> </image>
</gallery>
swf on domain1.com:
var imagesXML:XML;
var variables:URLVariables = new URLVariables();
var varURL:URLRequest = new URLRequest("MyPHPfile.php");
varURL.method = URLRequestMethod.POST;
varURL.data = variables;
var MyLoader:URLLoader = new URLLoader;
MyLoader.dataFormat =URLLoaderDataFormat.VARIABLES;
MyLoader.addEventListener(Event.COMPLETE, XMLDone);
MyLoader.load(varURL);
function XMLDone(event:Event):void {
var imported_XML:Object = event.target.data.imported_XML;
imagesXML = new XML(imported_XML);
MyTextfield_1.text = imagesXML;
MyTextfield_2.text = imagesXML.image[0].attribute("thumbPath"); // sample reference to attribute "thumbPath" of the first element
php file on domain1.com:
<?php
$xml_file = simplexml_load_file('../../domain2.com/galleries/gallery_1/MyXMLfile.xml'); // directory to XML file on the same server
$imported_XML = $xml_file->asXML();
print "imported_XML=" . $imported_XML;
?>
Regards
PS: for those who read the above discussion: the first and the second script work but you must test which one is better in your situation. The first script will also work between two domains on different servers. No cross domain policy file needed. -
Can I load xml file from SWC without using @embed
I'm developing a mobile application in which I need to load xml files from File.applicationDirectory. This works great if the xml files are part of the main application swf. But I would like to move these xml files into a SWC so they could be shared across multiple applications.
Using FlashBuilder 4.5, when a SWC is built, I can specify files to embed in the library that are not assets (Assets Tab of Flex Library Build Path). For various design reasons, I do NOT want to embed the xml files via @embed.
When the swc is built and I open it up using a zip utility, I see the xml files in there just fine. So they are being bundled with the SWC. But how can I load these files in my main application that does not involve using @embed? When the main application is built, the swc setting for link type is "merged into code".
I wouldn't expect the application to automatically pull out the xml files from the swc and place them in the File.applicationDirectory on the mobile device. I've tried loading from there just in case but file.exists is false (as expected).
I've searched the web (and continue to do so) and all the answers seem to be to use @embed. Is there another way?
RandyIt's actually a lot easier than you think.
Just reference the file like any'ol URL using a path relative to the SWC's src directory.
So if you include the file "assets/xml/some.xml", just use that same string like you would any remote resource.
For example:
var loader:URLLoader = new URLLoader( new URLRequest("assets/xml/some.xml"));
I believe it would also work like this "/assets/xml/some.xml", but I prefer relative paths so the link doesnt break if moved out of the SWC...
Maybe you are looking for
-
Data upload Vendor Master Chinese character from Excel does not upload
Hi Gurus, We are trying to upload Vendor Master from Excel sheet. The Chinese characters in excel sheet is not getting uploaded. After upload, we see in SAP as ????? for these Chinese character. Could any one inform what setting I may need to change?
-
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm
PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true New-PowerPivotServiceApplication : The PowerPivot System Servi
-
Automatic Vendor Evaluation - Partner Roles
Hi SAP Gurus, Please try to help me with the following scenario. My client has different Goods Suppliers (GS1, GS2 and GS3) for a particular vendor (VN). They have been attached as three different partner roles for the vendor (VN). They do evaluation
-
I cannot download Adobe Reader. I only can get to sign on, then it doesn't accept my ID or password
-
I would like to change the ike and NAT-T port from UDP 500 and 4500 to 505 and 4505 Is it possible to do that. This is because i already port forward udp 500 and 4500 to another router (Router B) This router B will setup a VPN to remote site.