Loading the e1000 driver automatically

I have to manually load the e1000 driver to be able to boot into zenworks 7
how can I load this automatically so zenworks imaging boots straight to the
bash prompt?
Many thanks

I followed this article,
https://secure-support.novell.com/Ka...AL_Public.html
found the parameters that i required and added them to the z_maint.cmd file
(we use the maintenance mode)
These parameters are newid="0x8086 0x10bd,e1000"
But this doesn't load the e1000 driver automatically
Any ideas? I've read other people have had problems with this
"Oli" <[email protected]> wrote in message
news:yrtzj.7549$[email protected]..
>I have to manually load the e1000 driver to be able to boot into zenworks 7
>
> how can I load this automatically so zenworks imaging boots straight to
> the bash prompt?
>
> Many thanks
>

Similar Messages

Unable to load the jdc driver

Hi,
I am using mckoi, but I don't succed in loading the jdbc driver:
Class.forName("com.mckoi.JDBCDriver");This line throw a ClassNotFoundException. But:
cd $CLASSPATH; ls | grep mkjdbc.jar
mkjdbc.jar
So the jar file is in the CLASSPATH.
I try also:
import com.mckoi.JDBCDriver;But when it compile:
javac ConnectToServerDemo.java
ConnectToServerDemo.java:2: package com.mckoi does not exist
import com.mckoi.JDBCDriver;
Something strange:
java -cp mckoidb.jar com.mckoi.tools.JDBCQueryTool -u "admin_user" -p "aupass00"
It's work very well !
I don't understand and I have no idea.
It will be fine if someone can help me.

You should follow duffymo's advice and explicitly pass classpath on the command line.
However, classpath environment variable can work. It appears you have the directory in which the jar file resides in the classpath. Java won't find JARs automatically, you have to include the name of the JAR file explicitly.
E.g., if your jar is located in "/mydir" and your classpath environment variable contains an entry "/mydir" change it to "/mydir/mckoidb.jar", or better yet add that in addition to "/mydir" so classes are also found.
Tim

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

8.1 will not load the dvd driver error 39

The dvd played with no problem in 8, worked fine. I loaded 8.1 now it will not load the driver, says error 39. I uninstalled and reinstalled still the same. I got a external working DVD, plugged it in and the same code, same problem. windows
8.1 does not load the DVD driver.
what is the fix I understand it 8 does not play dvd movies, video this does not even recognize the player for music CD
jack walsh

Please repost your inquiry in the
Windows 8.1 Community Forum. Thank you!
Carey Frisch

Hi i just bought a iMac 24'' and i can't seem to load the cd drive it will not grab it in!! can anyone please advise? thanks john

hi i just bought a iMac 24'' and i can't seem to load the cd drive it doesnt do anything!! can anyone help?
thanks

The last 24" was a 2009 model and they started in 2006, so which one is yours?
Here is a list of all 24" models:
http://www.everymac.com/search/search.html?cx=partner-pub-8015755554271706%3A2ho jc0-6s67&cof=FORID%3A11&ie=ISO-8859-1&q=24%22+imac&sa=Search&siteurl=www.everyma c.com%2F&ref=&ss=2299j974627j9
All of them had a built in Superdrive. It could be dirt (easy fix) or a malfunctioning mechanism (happened on mine) - in that case, it would have to be replaced and you may be better off getting an external drive (less expensive).
And, you said it has 10.8.5 installed? Did the seller give you the original install DVDs? You will need those sooner or later.

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How can i load the device driver for my ipod nano 7th generation

When I plug in my ipod nano 7th generation (for the first time), I am getting a message about "unknown device" and "driver not installed properly". Can I manually load the device driver some other way?

Hi there Jen292,
You may find the troubleshooting steps in the article below helpful.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.

Equium - Windows can't load the device driver for USB dongle

I have been using a dongle without problems for about a month, however now it is saying (in device manager ) "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
what does this mean and how can i fix it?

hi it's a vodafone 3gb cheap as chips dongle
it's an equium a200 i think
everything cam as one on the dongle, it uninstalled ok after initial problem, but now won't acknowledge it is in fact a dongle, just a 'usb mass filter' something or other?
i know i sound completely stupid, but when it comes to technology i am!

Load the JDBC driver

hi every one,
Iam trying to make a connection to Oracle9i using java, i know that first i have to load the JDBC driver and then establish a connection to the database but if faced 2 problems
1- I don't know the name of the jdbc driver. if any body can show me how can i know it.
2- when connecting to the database i have to provide the server name and the port number unfortunatly i don't know both.
so if any one can help to find them.
Thanks alot

hi every one,
Iam trying to make a connection to Oracle9i using
java, i know that first i have to load the JDBC
driver and then establish a connection to the
database but if faced 2 problems
1- I don't know the name of the jdbc driver. if any
body can show me how can i know it.
It depends on what driver you are using. Look it up and search the Oracle site. Or look through the gazillion examples in the JDBC forum.
2- when connecting to the database i have to provide
the server name and the port number unfortunatly i
don't know both.
Talk to your DBA. There is no way we could or should be able to help you on this one.

My computer will not load the device drive for my ipone 5. I have uninstalled, reinstalled itunes

my computer will not load the device driver for my ipone 5. I have uninstalled, reinstalled itunes; i have restarted phone; disabled startup devices for windows 7; restarted my computer; Please help- very frustrated

Device not recognized
http://support.apple.com/kb/TS1538
Note: You should only sync to one computer

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the Cannon website for the correct driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

Udev not loading the right driver for usbtmc device

I have a usb beam profiler and I'm trying to get it to work on arch linux. It works using NI-VISA, so I should be able to communicate with it using usbtmc. However, when I plug it in, it does not show up in /dev.
I think the problem is that udev is not loading the tmc interface driver when I plug it in.
Here's a snippet of the output from lsusb -v:
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
I believe that bInterface* should look something like:
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 3 Test and Measurement
bInterfaceProtocol 1 TMC
iInterface 5 TMC488
Is there a way to force udev to load the right interface? Or is the problem that I'm missing something from my kernel?

Could you post the entire output of lsusb -v for the device?
Bus 001 Device 013: ID 1313:8019 ThorLabs
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1313 ThorLabs
idProduct 0x8019
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
What device node name are you expecting?
Not sure, but probably /dev/usbtmc0
Is there a chance that it is being instantiated as a HID device? Does /dev/usbhid0 appear?
Nope, don't have a /dev/usbhid0
What does the journal say when the device has been attached?
I'm not sure what you mean, but dmesg says:
[ 6095.219400] usb 1-1.2: new high-speed USB device number 14 using ehci-pci
and udevadm monitor says:
KERNEL[6098.321484] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[6098.321887] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV [6098.324333] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV [6098.325356] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)

What sequence weblogic load the jdbc driver

I config a oracle thin driver,Oracle oci driver, weblogic oci
driver. But every time I reboot the weblogic ,I found the
sequence is not all the same, I changed the config.xml manally
but seems can not work.
So I want to know how the weblogic load the driver,and can I
make the sequence of load driver not change?
Thanks a lot

In order to create pools in a ordered sequence you may have to create a
startup class that dynamically creates these pools for you in sequence.
sree
"Eric.Nie" <[email protected]> wrote in message
news:[email protected]..
I config a oracle thin driver,Oracle oci driver, weblogic oci
driver. But every time I reboot the weblogic ,I found the
sequence is not all the same, I changed the config.xml manally
but seems can not work.
So I want to know how the weblogic load the driver,and can I
make the sequence of load driver not change?
Thanks a lot

How to make udev load ALSA driver automaticly?

I have added " modprobe snd-via82xx " (ALSA driver) to /etc/profile.d/mysh.sh, and I could use almost every multimedia software except mp3blaster.
But after I installed udev, the udev load "via82cxxx_audio" (OSS driver) automaticly instead of snd-via82xxx. mp3blaster can work now, but the esd output plug-in of XMMS could not work, so did stardict (is here anyone have ever used it?).
I modprobe snd-via82xxx manually, but have no use.
How to make OSS and ALSA work parallelly? And, how to make udev load ALSA automacticly instead of OSS?

I have knew this method. What I mean is that the udev load OSS driver at boot. Although I modprobe the ALSA driver, my software (stardict) can not play a wav sound (Other software can).
I wants udev NOT to load OSS driver at boot. Or, it is the best, make OSS and ALSA work parallelly,

Why is XP COM port complaining it cant load the driver (Error31)

Uninstallation of all NI software and reinstallation of the V1.6 upgrade results in COM3 and COM4 visible in XP Device Manager at the usual addresses and sharing IRQ 7 with an ! over them.
The first port complains "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)". The second port complains "Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)"
Using the NI software to test the ports the software and hardware are ticked off but COM3 and COM4 are not shown ... help!!!
Attachments:
NIBadComPorts.bmp ‏862 KB

Try right-clicking on both devices in the Windows Device Manager and select uninstall. Then open Measurment and Automation Explorer (MAX) and go-to Tools->NI-Serial-> Recover Unused Serial Ports. Hopefully, this will get your system back to a safe state. Then, just reboot your computer.
I hope this helps out.
-JoshuaP

Loading the e1000 driver automatically

Similar Messages

Maybe you are looking for