LoadMovie into target is weird?

I'm trying to load a external movie clip (600x450_test.swf)
to a target (targ02) on the main timeline.
I have a clip on the main timeline which contains all my
buttons. The script (below) is in the first frame of this clip.
The external clip loads but replaces the entire main movie
all together.
I've been away from Flash for a few weeks but I thought this
was what always worked. Not near old files to check.
Script here:
stop();
this.btn_Installingyt.onRelease = function(){
_root.loadMovie("600x450_test.swf", "targ_02");
System: FlashPro8, XP.

then you don't have a movieclip with instance name mov_mc on
the _root timeline when that button is pressed or your/name to
Art_Toggle.swf is incorrect or you really are loading that swf but
you don't see what you expect.

Similar Messages

Getting the Source File name Info into Target Message

Hi all,
I want to get the Source file name Info into Target message of one of the fields.
i followed Michal BLOG /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Requirement :
1) I am able to get the Target file name as same as the source file name when i check the ASMA in Sender & Receiver Adapter , with out any UDF...............this thing is OK
2) I took One field extra in the target structure Like "FileName" & I mapped it Like
Constant(" " )--UDF-----FileName
I Checked the Option ASMA in Both Sender & Receiver Adapters
Here iam getting the Target File name as same as Source file name + Source File name Info in the Target Field " FileName".
I Dont want to get the Target File name as same as Source file name. I want like Out.xml as Target file name.
If i de-select the Option ASMA in Adapters means it is showing " null" value in the target field "FileName".
Please Provide the Solution for this
Regards
Bopanna

Hi All,
Iam able to do this by checking the Option ASMA in only sender adapter itself
Regards
Bopanna

My 12" powerbook logics card crashed. I have a 17". How do i retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"?

My 12" powerbook logics card crashed. I have a 17". How do I retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"? Where on the 12" hard drive do I go to search for them?

If the 12's logic board is trashed, I don't think you can get into FireWire Target Disk Mode. The computer has to start to get to FWTDM. Will it starte and run at all?
If it won;t start, you will have to go inside and extract the hard drive. Then get this gadget:
Newer Technology Universal Drive Adapter USB 3.0/2.0 - connects any 2.5", 3.5" or 5.25" drive
It allows you to connect a bare drive to another computer that has USB. It will act just like an external disk drive. Assuming the 12's drive is not damaged due to the LB failure, you can retrieve files quickly.

IMac G4 won't boot, go into target mode, or verbose, or single-user.

Hi, I am completely flummoxed.
Yesterday I had my iMac G4 networked (via FireWire cable) to my MacBook Pro. I was copying about 14 GB of data from the MBP to the G4. The MBP indicated the copy operation was finished, but the G4 went into a spinning beachball, from which I could not escape -- couldn't force-quit, change applications, open terminal, or anything. So I (reluctantly) did a hard power-down.
When I went to restart the G4, I got a grey screen of death -- for about 2 minutes. Then the screen goes black for a second, then goes grey again, this time with the alternating folder-and-question-mark icon. Bad news.
Here is what I have tried so far:
* Won't boot into target mode -- if I hold down T at startup, the screen stays black (never gets to the grey screen, or to the FireWire icon).
* Won't boot into single-user or verbose mode -- if I hold down cmd-S or cmd-V, computer stays grey.
* Won't boot in safe mode -- ditto.
So my next idea was to try booting from a startup disk. But how to open the optical drive tray? (This is a tray-loader, not a slot-loader.) I pulled down the white external door manually, but do not see an emergency open pinhole inside. But there must be one, right?
Does anybody have any other ideas on how I can break into this thing, or what might have gone wrong with it?

So my next idea was to try booting from a startup disk. But how to open the optical drive tray? (This is a tray-loader, not a slot-loader.) I pulled down the white external door manually, but do not see an emergency open pinhole inside. But there must be one, right?
I'm not at a G4 iMac right now, but other tray-load drives of that generation had a hole but ti's very low in the opening. Probably need a good light to see it.
Try starting the computer and holding the mouse button down while it's trying to boot. This is a startup shortcut to open the drive but may require that the system start to load, something with which yours is obviously struggling.
Does the iMac have the original Apple keyboard? Some third-party keyboards may not support the startup combos for safe mode, single-user, etc.

Putting new MacBook into Target Mode

Is it possible to put a fairly new MacBook with a Thunderbolt Port into Target Mode? I want to connect my MacPro to a MacBook in Target mode. I have connected the MacBook via it's Thunderbolt port to my MacPro Firewire 800 port using the correct cable. For some reason I cannot get the MacPro into Target Mode.. Any Assistance would be appreciated.
Aloha, from Hawaii, David - Hawaii PI

Check your steps http://support.apple.com/kb/ht1661

Drag the image into target

I need to drag the image like (banana.png) and drop that image into target(rectangle),target2(rectangle),etc. but I difficult to replace that target(rectangle) to be (banana.png) in drop event handler, Please help Me..
this is my source code
final Rectangle target = new Rectangle();
target.setOnDragDropped(new EventHandler <DragEvent>() {
@Override
public void handle(DragEvent event) {
System.out.println("onDragDrop");
Dragboard db = event.getDragboard();
if (db.hasImage()) {
db.getImage(); //how to get the image (banana.png) and replace the target (rectangle) ?
event.consume();
});

final Pane rectangleHolder = new Pane();
final Rectangle rectangle = new Rectangle();
rectangleHolder.getChildren().add(rectangle);
// add rectangleHolder to the layout instead of rectangle...
// and then
if (db.hasImage()) {
rectangleHolder.getChildren().setAll(new ImageView(db.getImage());
}Depending on your layout, you may be able simply replace the rectangle in the existing layout without introducing the new Pane. You can always do something like
ObservableList<Node> rectangleAndSiblings = ((Pane)rectangle.getParent()).getChildren();
rectangleAndSiblings.set(rectangleAndSiblings.indexOf(rectangle), new ImageView(db.getImage()));but it doesn't need to be that complex.

Can't get my AGP G4 into Target Mode

I have a new Intel MacMini I want to use for my home computer, so I tried get my old G4 to startup in Target mode (using lower case "t" at startup) to make file backup and account setup easier.
The G4 will not go into Target mode - I've tried both restarting and powerig-up, both with "t" pressed down from the beginning. Their are the usual power-up sounds, but the monitor screen remains blank - it doesn't progress to the floating-Y Firewire icon or the normal login screen.
I read somewhere about Open Firmware Password, but I don't seem to have that on this machine.
Some info about my G4 - is it a model that supports Target Mode?
Machine Name: Power Mac G4 (AGP graphics)
Machine Model: PowerMac3,1
CPU Type: PowerPC G4 (2.8)
Number Of CPUs: 1
CPU Speed: 450 MHz
L2 Cache (per CPU): 1 MB
Memory: 1.25 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
OS: 10.4.11
Two user accounts, both with admin privileges.
It was so great to set up my wife's Intel iMac with her account files from her old PowerPC via Target Mode. I'd love to be able to do the same with my own old PowerPC G4. Any help would be greatly appreciated!

SInce my need is to transfer my accounts from the old G4 to the new Mac Mini, I will drop the hunt for getting Target Mode working on the G4 and use Migration Assistant via Ethernet:
http://support.apple.com/kb/HT3322
http://discussions.apple.com/thread.jspa?threadID=1752061
Doesn't seem to be an entirely trouble-free process:
http://www.ehmac.ca/mac-ipod-help-troubleshooting/73933-help-migration-assistant .html
http://episteme.arstechnica.com/eve/forums/a/tpc/f/8300945231/m/999006696931
I will mark my question as "Answered".

I put my macbook into target disk mode and now it won't start up in regular mode

I put my macbook into target disk mode and now it won't start up in OSX. I have used my install disk and repaired the drive. I have held down the option key to choose the system. I have tried to start in safe mode with same result. The apple screen appears, but the gear just keeps turning. I can get it back into target disk mode by connecting it by firewaire to my macbook pro. It will start up in Windows when I choose that system. What can I do to get it to start up with OSX?
Thanks for your help.

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

Expression cannot be used as an INTO-target of a SESELECT/FETCH Statement

Hello guys
Iam new to oracle and this my first post
I have written this code in sql
declare
2 cursor madecursor is select bus_id ,bus_destination ,seat_no ,
3 driver_name from bus for update of seat_no nowait ; myseat bus.seat_no%type
4 ; begin
5 for bus_id in madecursor loop
6 select myseat into bus.bus_id from bus where
7 bus_id = bus_id
8 ; if
9 myseat < 5 then
10 update bus set seat_no = seat_no*2 WHERE CURRENT OF madecursor
11 ; DBMS_OUTPUT.PUT_LINE('Updated');
12 end if ;
13 end loop;
14 end;
but I have the following errors:-
ERROR at line 6:
ORA-06550: line 6, column 27:
PLS-00403: expression 'BUS.BUS_ID' cannot be used as an INTO-target of a SELECT/FETCH statement
ORA-06550: line 6, column 2:
PL/SQL: SQL Statement ignored
please help me.
Thanks in advance.
user613283

Firstly thank you for replies , I get use of your suggestions and change my code but still having errors please suggest.
SQL> declare
2 I_myseat bus.seat_no%type;
3 begin
4
5
6 select I_myseat into I_myseat from
7 bus where
8 bus_id = bus.bus_id
9 ;
10 if I_myseat < 5 then
11 update bus set seat_no = seat_no*2
12 where I_myseat<5
13 ; DBMS_OUTPUT.PUT_LINE('Updated');
14
15 end if;
16 end;
17 / declare
ERROR at line 1:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at line 6

Update the source record while loading data into target

Hello Friends,
I am loading data from "staging info object" into "target info object".
I have the validation code in 'start routine' in the transformations.
During validations, if the conditions are met, I would like to load the record into target and at the same time, update one specific field of this record ( e.g. say - LoadFlag ) in the source infoobject.
I am successfully able to load the records in the target info objects.
I would like to know, how to update the record in the source-infoobject.
Can anyone please let me know the ABAP syntax for this one.?
I promise to award points.
Thank you for your time.
Pramod.

Instead of ABAP you can:
a) connect the update rule to the target also to the source object as input. In this updaterule you can simple set the load indicator with a constant.
b) use an APD (TR RSANWB).

Load into PSA, then into target - in process chains

Hi
I have a question regarding first loading into PSA, then into target - using process chains
It can be done by executing a package only loading into PSA. Then using the process type "Read PSA and Update Data Target".
My problem is, that I want to split this into two seperate chains. I.e. loading all data into PSAs before loading into targets. But when I do these two tasks in seperate chains I get a syntax error shown below. Can it really be true, that you are not able to do this in seperate chains???
Thanks
Karsten
Process LOADING variant ZPAK_3WI2VMPZM3FE8Y1ELC0TKQHW7 is referenced but is not in the chain
Message no. RSPC060
Diagnosis
Process LOADING, variant ZPAK_3WI2VMPZM3FE8Y1ELC0TKQHW7 must precede the current process. This process is not however available in the chain.
System response
The system is unable to activate the chain.
Procedure
Change the current process so that it no longer references LOADING ZPAK_3WI2VMPZM3FE8Y1ELC0TKQHW7, or schedule process LOADING ZPAK_3WI2VMPZM3FE8Y1ELC0TKQHW7 in the chain so that it precedes the current process.

Hello Karsten
I've discussed this with SAP and even if the response was not clear, it doesn't seem to be possible. We also wanted to do this because we have source system working 24h/24 and 7/7. So as master data and tx data can be created at any time, it was the only way to make sure all master data were available for the load of tx data (loading tx data in PSA, then loading master data, then PSA to target). Is it for the same reason that you want to dissociate the loads ?
What I've done eventually is load in an ODS not BEX relevant (so SID not required), no master check in IP, so the ODS is like the PSA. Then load master data, activate. Then load from this ODS to target. It's working fine. I do not reconsidere changing this.
Good luck
Philippe

Are you ready : G4 MDD 1.25 DP FW400 will not go into Target Mode.

G4 MDD 1.25 DP FW400 will not go into Target Mode.....for migration assistant.
Shuts down every time I try either using "T" on startup or using the Boot Drive panel. G5 1.8DP I'm trying to migrate to shows up on the G4. Essentially, the FW400 ports are working in both directions as long as the G4 is not in target mode.
Ran Diskwarrior on hard drive
Reset PMU
Reset PRAM and NVRAM
AHT test passed
Moved hard drive from ATA100 to the ATA66
No data cables plugged in

Hi! make sure the G4 drive is either jumpered as the master drive and on the end of the ribbon OR if it's jumpered cable select that it is in the master position on the end of the ribbon. FWTDM won't work with the drive in the slave position. Tom

HELP! Macbook won't load into Target Disk Mode

basically long story short i had about 100 mb of memory left on my 200gb macbook pro. i was trying to save a word document when everything froze, i manually restarted the computer and thats when all **** broke loose
heres what happened
-weird sounds coming from computer
-the computer takes about 5-10 min to get to the login prompt
-takes another 5-10 min after login to load desktop wallpaper
-takes about 40 min for it to load anything on the dock and then nothing will load after that none of my desktop icons u cant access any programs..the computer will continue to make weird noises during this time.
heres what ive done so far.
-reset pram (didnt work)
-harddrive test (Did both standard and extended ...test results came back fine nothing seemed to be wrong)
-i tried to use disk utility to repair disk and it said:
+"checking extents overflow file+
+checking catalog file+
+invalid node structure+
+rebuilding catalog b-tree+
+the volume macintosh HD could not be repaired+
+error: the underlying task reported failure on exit+
+1 hfs volum checked+
+-1 volume could not be repaired because of an error+
+repair attempted on 1 volume+
+-1 volume could not be repaired"+
-tried the fsck option and it told me basically the same thing
-tried booting in safe mode ...computer wont boot into safe mode it will just shut itself off
so my last option is trying to get info off of my computer using target disk mode...i have a spare macbook that im using as a host for the macbook pro...
i bought a firewire cable today from the apple store
i followed the directions step by step on the apple website
-i connected the firewire cable, both computers were off.
-i turned the host computer on (target computer remianed off)
- held the T button right as the computer started
- then i got a grey screen with a big firewire logo floating around from left to right
[img]http://www.didntyouhear.com/wp-content/uploads/2007/04/firewire_logo.jpg[/img]
what am i doing wrong!? ??
someone PLEASE HELP!

ok i figured it out however...
everytime i try to click on my harddrive or folders in the harddrive the host computer freezes as does the target computer...
im using a macbook as the host computer to my macbook pro target...
after performing target disk mode on the target computer and connecting the two computers via firewire...
i can see my target drive on my host desktop....
omg and when i clicc on my targe drive i see all my old folders!!! yay!! that means my old files arent lost forever!
the only problem is when i try to access the folders i get the colored pinwheel
and its very slow..... nothin will load and then my host computer freezes and i have to forcequit...i didnt even get to begin transferring the files before the host computer would freeze....as this would happen the fans on the target computer would be whirring up and the floating firewire logo screensaver on the target computer would also stop floating from left to right..
what gives?

Error while importing CIM file into target SLD

Hi
We are in the process of moving our XI objects to QA.
As a first step , we are preparing the QA SLD ( we have a separate SLD instance for XI DEV and QA environments ).
We have our standard objects loaded into the QA SLD. Now for the custom objects :
1.I export the product and the corresponding SWCV from the source SLD .
2. I import the zip file into the target SLD in that order. While importing the product into the target, I get a warning -
<b>The target namespace for the special import already contains data for one or more export lines. Continuing this import may corrupt the state of your data.</b>
I am not sure what this means - should I go ahead and import my custom product and its SWCV ( the next step ) despite this warning ? Or am I missing any step ? I checked the weblog on the SLD preparation and did not see any additional steps other than export/import from the source/target SLDs
Thank you for your time in advance.

Hi Karthik,
Check out this link
==>http://help.sap.com/saphelp_nw04s/helpdata/en/b2/0aae42e5adcd6ae10000000a155106/frameset.htm
Hope this will explain you all the steps in importing...:)
Regards,
Sundararamaprasad.

Mac mini won't boot into target disk mode

Hi
I just bought a Mac mini on eBay. I'm not sure of the spec but I think its a G4.
When it arrived I plugged it in and switched on to find the question mark folder appear.
I put in a 10.5 disk but it would not boot from it. [this was a disk I got with another s/h machine though so may not be bootable]
As I could not install from the disk I figured my best bet would be to target disk in and install osx from a powerbook I have here.
However I can't get target disk to work.
The keyboard is definitely working as it allows me to boot into OF and zap the PRAM
I've also tried pressing what I believe to be the SMU button just behind the connector board to the HD and DVD drive but no luck.
Anybody got any ideas as to whats going on?
Cheers

Ok, I can probably get a copy of OSX
The problem is I think the DVD drive is faulty as it wouldn't give me my disk back I tried "eject cd" in OF but it didn't work and I had to open it up with a screw driver and take it out.
If the disk is corrupted is there a way to erase it without putting it in another machine. ie can it be done from OF?
Thanks for your help btw

LoadMovie into target is weird?

Similar Messages

Maybe you are looking for