Local Heap problem in WLE client
Hi all,
In visual c++ client, I've a local object which is pass to WLE server.
The server will return the value to this local object. However, the local
object is therefore pointing to the memory address of server's output
object . So, in vc++ client, when program try to free memory of local
object. "Debug Assertion Failure" meesage is occur. _CtrlHeapPointerHeap is
always fail for this local object. And my program is dead.
Do U know how to solve this problem?
Thanks!
Sam
In general, the memory for in-out parameters needs to be allocated
dynamically. The caller (i.e., your code) is responsible for allocating and
initializing the memory before passing the parameter. When the call returns,
the WLE library will de-allocate your memory and allocate memory for the object
being returned and change the pointer passed in to refer to that newly
allocated memory. Your code only needs to de-allocate what is in that pointer
once the call returns (and you are finished with the object); you should not
worry about the previously allocated memory as the WLE libraries have already
freed that for you (in accordance with the CORBA specification).
Hope this helps,
Robert
Sam Ho wrote:
Hi all,
In visual c++ client, I've a local object which is pass to WLE server.
The server will return the value to this local object. However, the local
object is therefore pointing to the memory address of server's output
object . So, in vc++ client, when program try to free memory of local
object. "Debug Assertion Failure" meesage is occur. _CtrlHeapPointerHeap is
always fail for this local object. And my program is dead.
Do U know how to solve this problem?
Thanks!
Sam
Similar Messages
-
Hello,
I experiance problems with QuickVPN client (version 1.4.1.2). I'm trying to connect to router SA520 with 1.1.65 firmware,
vpn tunell is established, but client says "The remote gateway is not responding. Do you want to wait?"
in case i click no, it drops vpn tunell
QuickVPN client log looks like this:
2010/08/18 12:13:27 [STATUS]OS Version: Windows 7
2010/08/18 12:13:27 [STATUS]Windows Firewall Domain Profile Settings: ON
2010/08/18 12:13:27 [STATUS]Windows Firewall Private Profile Settings: ON
2010/08/18 12:13:27 [STATUS]Windows Firewall Private Profile Settings: ON
2010/08/18 12:13:27 [STATUS]One network interface detected with IP address 192.168.1.100
2010/08/18 12:13:27 [STATUS]Connecting...
2010/08/18 12:13:27 [DEBUG]Input VPN Server Address = vpn.in-volv.lv
2010/08/18 12:13:28 [STATUS]Connecting to remote gateway with IP address: 78.28.223.10
2010/08/18 12:13:28 [WARNING]Server's certificate doesn't exist on your local computer.
2010/08/18 12:13:30 [STATUS]Remote gateway was reached by https ...
2010/08/18 12:13:30 [STATUS]Provisioning...
2010/08/18 12:13:39 [STATUS]Success to connect.
2010/08/18 12:13:39 [STATUS]Tunnel is configured. Ping test is about to start.
2010/08/18 12:13:39 [STATUS]Verifying Network...
2010/08/18 12:13:44 [WARNING]Failed to ping remote VPN Router!
2010/08/18 12:13:47 [WARNING]Failed to ping remote VPN Router!
2010/08/18 12:13:50 [WARNING]Failed to ping remote VPN Router!
2010/08/18 12:13:53 [WARNING]Failed to ping remote VPN Router!
2010/08/18 12:13:56 [WARNING]Failed to ping remote VPN Router!
2010/08/18 12:14:08 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2010/08/18 12:14:12 [STATUS]Disconnecting...
2010/08/18 12:14:15 [STATUS]Success to disconnect.
Server logs look like this:
2010-08-18 12:28:49: INFO: Adding IPSec configuration with identifier "arvils"
2010-08-18 12:29:02: INFO: Configuration found for 83.243.93.200[500].
2010-08-18 12:29:02: INFO: Received request for new phase 1 negotiation: 78.28.223.10[500]<=>83.243.93.200[500]
2010-08-18 12:29:02: INFO: Beginning Identity Protection mode.
2010-08-18 12:29:02: INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2010-08-18 12:29:02: INFO: Received Vendor ID: RFC 3947
2010-08-18 12:29:02: INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2010-08-18 12:29:02: INFO: Received unknown Vendor ID
2010-08-18 12:29:02: INFO: Received unknown Vendor ID
2010-08-18 12:29:02: INFO: Received unknown Vendor ID
2010-08-18 12:29:02: INFO: Received unknown Vendor ID
2010-08-18 12:29:02: INFO: For 83.243.93.200[500], Selected NAT-T version: RFC 3947
2010-08-18 12:29:02: INFO: NAT-D payload matches for 78.28.223.10[500]
2010-08-18 12:29:02: INFO: NAT-D payload does not match for 83.243.93.200[500]
2010-08-18 12:29:02: INFO: NAT detected: PEER
2010-08-18 12:29:02: INFO: Floating ports for NAT-T with peer 83.243.93.200[4500]
2010-08-18 12:29:02: INFO: ISAKMP-SA established for 78.28.223.10[4500]-83.243.93.200[4500] with spi:e2cd855a75fc0887:6dc3b2e025152444
2010-08-18 12:29:02: INFO: Sending Informational Exchange: notify payload[INITIAL-CONTACT]
2010-08-18 12:29:02: INFO: Responding to new phase 2 negotiation: 78.28.223.10[0]<=>83.243.93.200[0]
2010-08-18 12:29:02: INFO: Using IPsec SA configuration: 192.168.75.0/24<->192.168.1.100/32
2010-08-18 12:29:02: INFO: Adjusting peer's encmode 3(3)->Tunnel(1)
2010-08-18 12:29:02: INFO: IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=47693803(0x2d7bfeb)
2010-08-18 12:29:02: INFO: IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 78.28.223.10->83.243.93.200 with spi=1079189482(0x40531fea)
2010-08-18 12:35:57: INFO: an undead schedule has been deleted: 'pk_recvupdate'.
2010-08-18 12:35:57: INFO: Purged IPsec-SA with proto_id=ESP and spi=1079189482(0x40531fea).
2010-08-18 12:40:46: INFO: Configuration found for 83.243.93.200[500].
2010-08-18 12:40:46: INFO: Received request for new phase 1 negotiation: 78.28.223.10[500]<=>83.243.93.200[500]
2010-08-18 12:40:46: INFO: Beginning Identity Protection mode.
2010-08-18 12:40:46: INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2010-08-18 12:40:46: INFO: Received Vendor ID: RFC 3947
2010-08-18 12:40:46: INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2010-08-18 12:40:46: INFO: Received unknown Vendor ID
2010-08-18 12:40:46: INFO: Received unknown Vendor ID
2010-08-18 12:40:46: INFO: Received unknown Vendor ID
2010-08-18 12:40:46: INFO: For 83.243.93.200[500], Selected NAT-T version: RFC 3947
2010-08-18 12:40:46: INFO: NAT-D payload matches for 78.28.223.10[500]
2010-08-18 12:40:46: INFO: NAT-D payload does not match for 83.243.93.200[500]
2010-08-18 12:40:46: INFO: NAT detected: PEER
2010-08-18 12:40:46: INFO: Floating ports for NAT-T with peer 83.243.93.200[4500]
2010-08-18 12:40:46: INFO: ISAKMP-SA established for 78.28.223.10[4500]-83.243.93.200[4500] with spi:28447d39874689f9:a2b7da19d8d86413
2010-08-18 12:40:46: INFO: Responding to new phase 2 negotiation: 78.28.223.10[0]<=>83.243.93.200[0]
2010-08-18 12:40:46: INFO: Using IPsec SA configuration: 192.168.75.0/24<->192.168.1.100/32
2010-08-18 12:40:46: INFO: Adjusting peer's encmode 3(3)->Tunnel(1)
2010-08-18 12:40:47: INFO: IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=259246202(0xf73c87a)
2010-08-18 12:40:47: INFO: IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 78.28.223.10->83.243.93.200 with spi=3642234214(0xd9181566)
2010-08-18 12:43:27: INFO: IPsec-SA expired: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=33356156(0x1fcf97c)
2010-08-18 12:45:47: INFO: an undead schedule has been deleted: 'pk_recvupdate'.
2010-08-18 12:45:47: INFO: Purged IPsec-SA with proto_id=ESP and spi=3642234214(0xd9181566).
The most interesting thing is that sometimes this message appears, sometimes not (with the same configuration).
Please help!Hi,
I have some problem. I am using Windows 7 Entreprice x64. I use SA520 Firmware 1.1.65 and QuickVPN 1.4.1.2 port 60443.
"The remote gateway is not responding. Do you want to wait"
2010-08-18 17:25:51: INFO: Adding IPSec configuration with identifier "username"
2010-08-18 17:25:51: INFO: Adding IKE configuration with identifer "username"
2010-08-18 17:26:04: INFO: Configuration found for xxx.xxx.xxx.xxx[235].
2010-08-18 17:26:04: INFO: Received request for new phase 1 negotiation: 172.22.5.10[500]<=>xxx.xxx.xxx.xxx[235]
2010-08-18 17:26:04: INFO: Beginning Identity Protection mode.
2010-08-18 17:26:04: INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2010-08-18 17:26:04: INFO: Received Vendor ID: RFC 3947
2010-08-18 17:26:04: INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2010-08-18 17:26:04: INFO: Received unknown Vendor ID
2010-08-18 17:26:04: INFO: Received unknown Vendor ID
2010-08-18 17:26:04: INFO: Received unknown Vendor ID
2010-08-18 17:26:04: INFO: Received unknown Vendor ID
2010-08-18 17:26:04: INFO: For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
2010-08-18 17:26:04: INFO: NAT-D payload does not match for 172.22.5.10[500]
2010-08-18 17:26:04: INFO: NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
2010-08-18 17:26:04: INFO: NAT detected: ME PEER
2010-08-18 17:26:04: INFO: Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
2010-08-18 17:26:04: INFO: ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:ed4f291c71c1b688:7e6a8a0968f878fb
2010-08-18 17:26:04: INFO: Sending Informational Exchange: notify payload[INITIAL-CONTACT]
2010-08-18 17:26:04: INFO: Responding to new phase 2 negotiation: 172.22.5.10[0]<=> xxx.xxx.xxx.xxx[0]
2010-08-18 17:26:04: INFO: Using IPsec SA configuration: 192.168.75.0/24<->192.168.170.224/32
2010-08-18 17:26:04: INFO: Adjusting peer's encmode 3(3)->Tunnel(1)
2010-08-18 17:26:05: INFO: IPsec-SA established[UDP encap 48540->4500]: ESP/Tunnel xxx.xxx.xxx.xxx->172.22.5.10 with spi=239099274(0xe405d8a)
2010-08-18 17:26:05: INFO: IPsec-SA established[UDP encap 4500->48540]: ESP/Tunnel 172.22.5.10-> xxx.xxx.xxx.xxx with spi=3886848189(0xe7ac98bd)
2010-08-18 17:26:07: INFO: Configuration found for xxx.xxx.xxx.xxx[235].
2010-08-18 17:26:07: INFO: Received request for new phase 1 negotiation: 172.22.5.10[500]<=> xxx.xxx.xxx.xxx[235]
2010-08-18 17:26:07: INFO: Beginning Identity Protection mode.
2010-08-18 17:26:07: INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2010-08-18 17:26:07: INFO: Received Vendor ID: RFC 3947
2010-08-18 17:26:07: INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2010-08-18 17:26:07: INFO: Received unknown Vendor ID
2010-08-18 17:26:07: INFO: Received unknown Vendor ID
2010-08-18 17:26:07: INFO: Received unknown Vendor ID
2010-08-18 17:26:07: INFO: For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
2010-08-18 17:26:07: INFO: NAT-D payload does not match for 172.22.5.10[500]
2010-08-18 17:26:07: INFO: NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
2010-08-18 17:26:07: INFO: NAT detected: ME PEER
2010-08-18 17:26:07: INFO: Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
2010-08-18 17:26:07: INFO: ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:699f34b434d4318c:df4adca414787d36
2010-08-18 17:27:14: INFO: Purged ISAKMP-SA with proto_id=ISAKMP and spi=699f34b434d4318c:df4adca414787d36.
2010-08-18 17:27:14: INFO: Configuration found for xxx.xxx.xxx.xxx[235].
2010-08-18 17:27:14: INFO: Received request for new phase 1 negotiation: 172.22.5.10[500]<=> xxx.xxx.xxx.xxx[235]
2010-08-18 17:27:14: INFO: Beginning Identity Protection mode.
2010-08-18 17:27:14: INFO: Received Vendor ID: MS NT5 ISAKMPOAKLEY
2010-08-18 17:27:14: INFO: Received Vendor ID: RFC 3947
2010-08-18 17:27:14: INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2010-08-18 17:27:14: INFO: Received unknown Vendor ID
2010-08-18 17:27:14: INFO: Received unknown Vendor ID
2010-08-18 17:27:14: INFO: Received unknown Vendor ID
2010-08-18 17:27:14: INFO: For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
2010-08-18 17:27:14: INFO: NAT-D payload does not match for 172.22.5.10[500]
2010-08-18 17:27:14: INFO: NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
2010-08-18 17:27:14: INFO: NAT detected: ME PEER
2010-08-18 17:27:15: INFO: ISAKMP-SA deleted for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:699f34b434d4318c:df4adca414787d36
2010-08-18 17:27:15: INFO: Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
2010-08-18 17:27:15: INFO: ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:3fe5eb0bddbf2b9a:f5c11d7f813ca74a
2010-08-18 17:27:15: INFO: Sending Informational Exchange: notify payload[INITIAL-CONTACT]
2010-08-18 17:28:20: INFO: Purged ISAKMP-SA with proto_id=ISAKMP and spi=3fe5eb0bddbf2b9a:f5c11d7f813ca74a.
2010-08-18 17:28:21: INFO: ISAKMP-SA deleted for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:3fe5eb0bddbf2b9a:f5c11d7f813ca74a
With windows XP Pro i dont have this problem.
Is there a detailed configuration guide?
10x -
Problem: The wireless client Obtaining IP address.
Problem: The wireless client Obtaining IP address.
Setup.
I have a fiber circuit which feedes my Wan port. Then
I made a local network that then I branch off to five other AirPort Extremes.
Acting as access points with a static IP for local network, with no security enable and extending the wireless network name is off.
With both types of models, the new & older all extreme models.
Sym:
I can reset the head end airport router with will fix the problem for a day or so.
Question:Can the wireless client cause this type of problem. the reason I asked, everything was working fine for the last 2 two years until I added a new access point. I have change it out with another unit which did not help the dhcp problem.
So my thinking either my head end router is starting to go bad with DHCP or a wireless client interaction may be locking up DHCP until I restart the router again.
Has any one had the same type of problems with DHCP???Thanks for the quick response.
The first option sounds like I need some type of wireless software which at the moment I'm not utilizing so don't know how to do that.
option 2 also sounds foreign to me ! ;-)
Can you add some details or point me to any links you can ref me to so I can try to familiarize myself with these options ?
Regards
Mark -
Locale Settings lost on mobile client 7.8.2.14 after creation of BIP report
Hi All,
we went live with BI Publisher reports (Siebel 7.8.2.14) at the beginning of June.
Now some of our users are having trouble with their mobile web client.
For example our colleagues in Poland have their Windows XP regional settings set to "Polish". It will make Siebel use date format for all date fields (e.g. activity start date) display as YYYY-MM-DD - this works just fine until user is creating a BIP report. After successfull report creation, all locale settings in the mobile client are lost. Instead of YYYY-MM-DD, the dates are displayed in DD.MM.YYYY and creation of new records produces and error. Also, currency and number formats are mixed up.
I assume it's a bug - anyone hit this before?
Edited by: Penky on Jun 17, 2011 11:38 AMYes, we finally decided to do so!
The main reason was that we had a lot of new report change requests and did not want to do the work twice (now in Actuate and then again in BIP). Also we plan our 8.x upgrade for second half of 2011 so this was already some kind of preparation, so we can completely focus on the upgrade afterwards and don't need to hassle around with the reports as well.
issues we're still facing include "user's are not able to run reports after they change their position" or "List reports can only be run for few records, otherwise the search spec hit's an IO field's length limitation" or "report popup can not be suppressed although there's no useful information in it" (not to forget the one described in this thread) and some others.
Well ... after 1 1/2 years since I downloaded the first integration QF the BIP journey still does not end - it's like it just started :) -
Problem with Variable Client Support
Hello,
I work with Labview 8.5 and Crio 9014.
I have a problem with Variable Client Support. When I try to compile my project I have the following error:
"The Network Variable Engine and Variable Client Support must be installed on the RT target for this application to function properly..."
I have read that we have to install the Variable Client Support in Measurement and Automation by right-clicking on the software and then choosing add/remove software but I can't install the appropriate shared variable components because I can't see neither Network Variable Engine and Variable Client Support. So what can I do?
Can somebody help me?
ThanksI have exactly the same problem. I wanted go through the "Getting Started with the LabVIEW RT module" and when I use wizard for generating new project I get same notification in my VI...
The Network Variable Engine and Variable Client Support must be installed on the RT target
for this application to function properly. If the Network Variable Engine is not supported on
the target (e.g. FP-2000 with <32MB of RAM), open the project and move the variable library
to My Computer in the project. Doing this will deploy the variables to localhost but
will still require that Variable Client Support be installed on the RT target.
Could someone help please ?
Attachments:
ni.png 95 KB -
Hi,
I have a question on using EJB / or RMI servers with CORBA clients using
RMI-IIOP transport, which in theory should work, but in practice has few
glitches.
Basically, I have implemented a very simple server, StockTreader, which
looks up for a symbol and returns a 'Stock' object. In the first example, I
simplified the 'Stock' object to be a mere java.lang.String, so that lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case 1) and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA and RMI-to-RMI.
But the problem arises when I tried using the RMI server (via IIOP) with the
CORBA client, when the client tries to narrow the object ref obtained from
the naming service into the CORBA idl defined type (StockTrader) it ends up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a PortableRemoteObject derived
class, to make it IIOP compliant), and then the server to register the stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming =NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ": " +obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to register the RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref name (with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the naming
service, the operation StockTraderHelper.narrow() fails in the segment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registered in a CORBA
server (as opposed to an RMI server), but works correctly with no casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hariOn the contrary... all that is being said is that we needed to provide clearer examples/documentation in the 5.1.0 release. There will be no difference between the product as found in the service pack and the product found in the 5.1.1. That is, the only substantive will be that 5.1.1 will also
include the examples.
"<=one way=>" wrote:
With reference to your and other messages, it appears that one should not
expect that WLS RMI-IIOP will work in a complex real-life system, at least
not now. In other words, support for real-life CORBA clients is not an
option in the current release of WLS.
TIA
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
We currently publish an IDL example, even though the IDL programmingmodel in Java is completely non-functional, in anticipation of the support
needs for uses who need to use IDL to talk to the Weblogic server,
generically. This example illustrates the simplest connectivity; it does not
address how
to integrate CORBA and EJB, a broad topic, fraught with peril, imo. I'llnote in passing that, to my knowledge, none of the other vendors attempt
this topic either, a point which is telling if all the less happy to hear.
For the record then, what is missing from our distribution wrt RMI-IIOPare a RMI-IIOP example, an EJB-IIOP example, an EJB-C++. In this you are
correct; better examples are forth coming.
Still, I would not call our RMI-IIOP implementation fragile. I would saythat customers have an understandably hard time accepting that the IDL
programming model is busted; busted in the sense that there are no C++
libraries to support the EJB model, and busted in the sense that there is
simply no
support in Java for an IDL interface to an EJB. Weblogic has nothing to doit being busted, although we are trying to help our customers deal with it
in productive ways.
For the moment, what there is is a RMI (over IIOP) programming model, aninherently Java to Java programming model, and true to that, we accept and
dispatch IIOP request into RMI server objects. The way I look at it is this:
it's just a protocol, like HTTP, or JRMP; it's not IDL and it has
practically nothing to do with CORBA.
ST wrote:
Eduardo,
Can you give us more details about the comment below:
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult ot
use an idl client in java to work.It seems to me that Weblogic's RMI-IIOP is a very fragile
implementation. We
don't need a "HelloWorld" example, we need a concrete serious example(fully
tested and seriously documented) that works so that we can get a betteridea
on how to integrate CORBA and EJB.
Thanks,
Said
"Eduardo Ceballos" <[email protected]> wrote in message
news:[email protected]...
Please post request to the news group...
As I said, you must separate the idl related classes (class files and
java
files) from the rmi classes... in the rmic step, you must set a newtarget
(as you did), emit the java files into that directory (it's not clearyou
did this), then remove all the rmi class files from the class path... ifyou
need to compile more classes at that point, copy the java files to theidl
directly is you must, but you can not share the types in any way.
I fear that as soon as the call to narrow succeeds, the remainingapplication will fail to work correctly because it is too difficult otuse
an idl client in java to work.
Harindra Rajapakshe wrote:
Hi Eduardo,
Thanks for the help. That is the way I compiled my CORBA client, by
separating the IDL-generated stubs from the RMI ones, but still I
get a
CORBA.BAD_PARAM upon narrowing the client proxy to the interfacetype.
Here's what I did;
+ Define the RMI interfaces, in this case a StockTrader interface.
+ Implement RMI interface by extendingjavax.rmi.PortableRemoteObject
making
it IIOP compliant
+ Implemnnt an RMI server, and compile using JDK1.2.2
+ use the RMI implementation to generate CORBA idl, using RMI-IIOPplugin
utility rmic;
rmic -idl -noValueMethods -always -d idl stock.StockTraderImpl
+ generate Java mappings to the IDL generated above, using RMI-IIOPplugin
util,
idlj -v -fclient -emitAll -tf src stocks\StockTrader.idl
This creates source for the package stock and also
org.omg.CORBA.*
package, presumably IIOP type marshalling
+ compile all classes generated above using JDK1.2.2
+ Implement client (CORBA) using the classes generated above, NOTthe
RMI
proxies.
+ start RMI server, with stockTrader server obj
+ start tnameserv
+ start CORBA client
Then the client errors when trying to narrow the obj ref from the
naming
service, into the CORBA IDL defined interface using,
org.omg.CORBA.Object obj =naming.resolve(nn);
StockTrader trader =StockTraderHelper.narrow(obj); // THIS
ERRORS..!!!
throwing a CORBA.BAD_PARAM exception.
any ideas..?
Thanks in advance,
-hari
----- Original Message -----
From: Eduardo Ceballos <[email protected]>
Newsgroups: weblogic.developer.interest.rmi-iiop
To: Hari Rajapakshe <[email protected]>
Sent: Wednesday, July 26, 2000 4:38 AM
Subject: Re: problem using CORBA clients with RMI/EJBservers..!!!???
Please see the post on june 26, re Errors compiling... somewherein
there,
I suspect, you are referring to the rmi class file when you are
obliged
to
completely segregate these from the idl class files.
Hari Rajapakshe wrote:
Hi,
I have a question on using EJB / or RMI servers with CORBA
clients
using
RMI-IIOP transport, which in theory should work, but in practice
has
few
glitches.
Basically, I have implemented a very simple server,
StockTreader,
which
looks up for a symbol and returns a 'Stock' object. In the firstexample, I
simplified the 'Stock' object to be a mere java.lang.String, so
that
lookup
would simply return the 'synbol'.
Then I have implemented the above, as an RMI-IIOP server (case
1)
and a
CORBA server (case 2) with respective clients, and the pair of
client-servers work fine as long as they are CORBA-to-CORBA andRMI-to-RMI.
But the problem arises when I tried using the RMI server (via
IIOP)
with
the
CORBA client, when the client tries to narrow the object ref
obtained
from
the naming service into the CORBA idl defined type (StockTrader)
it
ends
up
with a class cast exception.
This is what I did to achieve the above results:
[1] Define an RMI interface StockTrader.java (extending
java.rmi.Remote)
with the method,
public String lookup( String symbol) throws RMIException;
[2] Implement the StorckTrader interface (on a
PortableRemoteObject
derived
class, to make it IIOP compliant), and then the server to
register
the
stock
trader with COS Naming service as follows:
String homeName =....
StockTraderImpl trader =new StockTraderImpl();
System.out.println("binding obj <" homeName ">...");
java.util.Hashtable ht =new java.util.Hashtable();
ht.put("java.naming.factory.initial", args[2]);
ht.put("java.naming.provider.url", args[3]);
Context ctx =new InitialContext(ht);
ctx.rebind(homeName, trader);
[3] Generate the RMI-IIOP skeletons for the Implementation
class,
rmic -iiop stock.StockTraderImpl
[4] generate the IDL for the RMI interface,
rmic -idl stock.StockTraderImpl
[5] Generate IDL stubs for the CORBA client,
idlj -v -fclient -emitAll StockTraderImpl.idl
[6] Write the client to use the IDL-defined stock trader,
String serverName =args[0];
String symList =args[1];
StockClient client =new StockClient();
System.out.println("init orb...");
ORB orb =ORB.init(args, null);
System.out.println("resolve init name service...");
org.omg.CORBA.Object objRef
=orb.resolve_initial_references("NameService");
NamingContext naming=NamingContextHelper.narrow(objRef);
... define a naming component etc...
org.omg.CORBA.Object obj =naming.resolve(...);
System.out.println("narrow objRef: " obj.getClass() ":"
+obj);
StockTrader trader =StockTraderHelper.narrow(obj);
[7] Compile all the classes using Java 1.2.2
[8] start tnameserv (naming service), then the server to
register
the
RMI
server obj
[9] Run the CORBA client, passing it the COSNaming service ref
name
(with
which the server obj is registered)
The CORBA client successfully finds the server obj ref in the
naming
service, the operation StockTraderHelper.narrow() fails in thesegment
below, with a class cast exception:
org.omg.CORBA.Object obj =naming.resolve(...);
StockTrader trader =StockTraderHelper.narrow(obj);
The <obj> returned by naming service turns out to be of the
type;
class com.sun.rmi.iiop.CDRInputStream$1
This is of the same type when stock trader object is registeredin a
CORBA
server (as opposed to an RMI server), but works correctly with
no
casting
excpetions..
Any ideas / hints very welcome.
thanks in advance,
-hari -
There is problem for every client.
Dear Experts,
There is problem for every client .....
Their inventory is valuated by FIFO method and they use Serial numbers on each and every transaction for their business.
As per the system the valuation at Delivery is taking by the FIFO method.
The customer has a requirement to get the inventory value based on the serial no. Is there any way to get out of this situation.
The Item FG001 is bought at 100 unit price with Qty 2 by having serial numbers Q1,Q2.
In the second transaction
The Item FG001 is bought at 120 unit price with Qty 2 by having serial numbers Q3,Q4.
As per the system if we create delivery document for the same item with qty 2 by giving serial number selection with qwe3 and qwe4, the system is taking the value for the items as 200.
But, my customer wants it to be as 240.
Is there any way to solve this.
Thanks & Regards
Manvendra Singh Niranjan
Edited by: Manvendra Singh Niranjan on May 6, 2009 1:28 PMPlease check these threads:
Cost By Seria Number
Re: Inventory valuation by serial number.
Thanks,
Gordon -
SCCM 2012 - How to add domain id to local administrator group of all clients
SCCM 2012 - How to add domain id to local administrator group of all clients
Hi,
i have a domain id sccmadmin which is a part of domain admins group too.
Need to add this ID to the local administrators group of all clients. How do I do this? Please help!Hi ,
you need to choose the second option .
First option will remove all the domains users from the local administrator group available in all the PC'S .Then local administrator group will only have the users updated on the members list present in group policy.
Note : Local admins accounts on the local administrators groups will not be removed.
Second option will add the newly created group to the local administrator group in all the PC'S and it will not remove the existing members in the local administrators group.
Step 1 : Just try to create one new group for SCCM management .
Step 2 : Then add the SCCM account to that group.
Step 3 : Then please create a new group policy on that just choose the second option.On that option just add the newly created group to be an member of administrator group in all the PC'S
Why i have asked you to create a new group ?
Because in second option , we don't have a option to add a individual user .
Once you have created a group policy it will like below snap.
As an additional i will tell how to find the newly created group policy is applying to computer objects or not ans also i will tell you how to force update the group policy
1.gpresult /r ----> To find the which group policy is applying on user and computer object .
2.rsop.msc ----> There you can able to find the change has been applied or not .
3.gpupdate /force -----> Forcefully updating the group policy in a client machine
4.In gpmc.msc there is one option called group policy results .That option will be used for centralized management to find the policies that are applied to a user and computer account.
5.Just check the event viewer in all the PC'S for group policy related events.
Most importantly you need to make sure all the computer accounts are placed in an ou ,where the newly created group policy is applying and also make sure that OU doesn't contain any inheritance block.
Please feel free to reply me if you have any queries.
Thanks & Regards S.Nithyanandham -
I encountered a problem with some client machines that use Firefox version 24ESR and IE8.
Ajax requests of aspx pages from Firefox are getting the following error from the iis server (iis version 7.5):
Bad Request - Request Too Long
HTTP Error 400. The size of the request headers is too long.
From analyzing the request that was sent to the server, I saw that the request consist of only the viewstate of the aspx page.
I tried to disable the viewstate for one page and the server got the request correctly.
I do not encounter any issues on these laptops with postback requests from Firefox or when running the same application with IE8.Sometimes that means that the page address sent is loo long.
Check the link address you are using.
I can't help you further and will send for more help. -
Problem using application client for local stateful session bean
Hi,
I have deployed a local stateful session bean in Sun J2EE 1.4 application server.
On running the applclient for the stateful session bean application client i get the following error:
Warning: ACC006: No application client descriptor defined for: [null]
cant we use application client for local stateful session beans. becoz the application runs smoothly when i changed the stateful sesion bean to remote.Hi,
No, an ejb that exposes a local view can only be accessed by an ejb or web component packaged within the same application. Parameters and return values for invocations through the ejb local view are passed by reference instead of by value. That can't work for an application client since it's running in a separate JVM.
--ken -
Problem while running client program in Netbeans4.0
Hi,
I am facing the following problem while running a client program in Nebeans4.0.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x7C9012B4
Function=RtlInitAnsiString+0x1B
Library=C:\WINDOWS\system32\ntdll.dll
Current Java thread:
at java.net.Inet4AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:770)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1059)
at java.net.InetAddress.getAllByName0(InetAddress.java:1009)
at java.net.InetAddress.getAllByName0(InetAddress.java:981)
at java.net.InetAddress.getAllByName(InetAddress.java:975)
at weblogic.rjvm.RJVMFinder.getDnsEntries(RJVMFinder.java:370)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:181)
- locked <0x1007ff78> (a weblogic.rjvm.RJVMFinder)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:125)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:291)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:234)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:135)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
at javax.naming.InitialContext.init(InitialContext.java:219)
at javax.naming.InitialContext.<init>(InitialContext.java:195)
at AcfClient.getHomeRef(AcfClient.java:73)
at AcfClient.forceSession(AcfClient.java:43)
at AcfClient.main(AcfClient.java:34)
Dynamic libraries:
0x00400000 - 0x00406000 C:\Data\j2sdk1.4.2_04\jre\bin\java.exe
0x7C900000 - 0x7C9B0000 C:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F4000 C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E6B000 C:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F01000 C:\WINDOWS\system32\RPCRT4.dll
0x77C10000 - 0x77C68000 C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000 C:\Data\j2sdk1.4.2_04\jre\bin\client\jvm.dll
0x77D40000 - 0x77DD0000 C:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F56000 C:\WINDOWS\system32\GDI32.dll
0x76B40000 - 0x76B6D000 C:\WINDOWS\system32\WINMM.dll
0x6BD00000 - 0x6BD0D000 C:\WINDOWS\system32\SYNCOR11.DLL
0x10000000 - 0x10007000 C:\Data\j2sdk1.4.2_04\jre\bin\hpi.dll
0x00390000 - 0x0039E000 C:\Data\j2sdk1.4.2_04\jre\bin\verify.dll
0x003B0000 - 0x003C9000 C:\Data\j2sdk1.4.2_04\jre\bin\java.dll
0x003D0000 - 0x003DD000 C:\Data\j2sdk1.4.2_04\jre\bin\zip.dll
0x02DA0000 - 0x02DAF000 C:\Data\j2sdk1.4.2_04\jre\bin\net.dll
0x71AB0000 - 0x71AC7000 C:\WINDOWS\system32\WS2_32.dll
0x71AA0000 - 0x71AA8000 C:\WINDOWS\system32\WS2HELP.dll
0x71A50000 - 0x71A8F000 C:\WINDOWS\System32\mswsock.dll
0x76F20000 - 0x76F47000 C:\WINDOWS\system32\DNSAPI.dll
0x76FB0000 - 0x76FB8000 C:\WINDOWS\System32\winrnr.dll
0x76F60000 - 0x76F8C000 C:\WINDOWS\system32\WLDAP32.dll
0x66210000 - 0x66219000 C:\WINDOWS\system32\netware\NWWS2NDS.DLL
0x50D50000 - 0x50D95000 C:\WINDOWS\system32\NETWIN32.DLL
0x50D00000 - 0x50D15000 C:\WINDOWS\system32\CLNWIN32.DLL
0x50DF0000 - 0x50E10000 C:\WINDOWS\system32\LOCWIN32.DLL
0x50DB0000 - 0x50DD9000 C:\WINDOWS\system32\NCPWIN32.dll
0x71AD0000 - 0x71AD9000 C:\WINDOWS\system32\WSOCK32.dll
0x66220000 - 0x6622C000 C:\WINDOWS\system32\netware\NWWS2SLP.DLL
0x1C000000 - 0x1C007000 C:\WINDOWS\system32\NWSRVLOC.dll
0x76C90000 - 0x76CB8000 C:\WINDOWS\system32\imagehlp.dll
0x59A60000 - 0x59B01000 C:\WINDOWS\system32\DBGHELP.dll
0x77C00000 - 0x77C08000 C:\WINDOWS\system32\VERSION.dll
0x76BF0000 - 0x76BFB000 C:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 497K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 89% used [0x10010000, 0x10083158, 0x10090000)
from space 64K, 57% used [0x100a0000, 0x100a9478, 0x100b0000)
to space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
tenured generation total 1408K, used 129K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 9% used [0x104f0000, 0x10510438, 0x10510600, 0x10650000)
compacting perm gen total 4096K, used 2122K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 51% used [0x14010000, 0x14222828, 0x14222a00, 0x14410000)
Local Time = Fri Aug 26 10:26:03 2005
Elapsed Time = 2
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_04-b05 mixed mode)
# An error report file has been saved as hs_err_pid1280.log.
# Please refer to the file for further information.
Can anyone pls let me know what could be the problem.
Thanks in adv.Hi,
This type of error
java.lang.NoClassDefFoundError: javax/naming/Context
will occur when the client program could not able to locate lib/j2EE.jar file.
So set the classpath correctly and make sure that you have correctly defined the JAVA_HOME environment variable in .bat script.
Hope this will help you.
Regards,
Anil.
Technical Support Engineer. -
Problem with VPN client on Cisco 1801
Hi,
I have configured a new router for a customer.
All works fine but i have a strange issue with the VPN client.
When i start the VPN the client don't close the connection, ask for password, start to negotiate security policy the show the not connected status.
This is the log form the VPN client:
Cisco Systems VPN Client Version 5.0.07.0290
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.1.7601 Service Pack 1
Config file directory: C:\Program Files (x86)\Cisco Systems\VPN Client\
1 14:37:59.133 04/08/13 Sev=Info/6 GUI/0x63B00011
Reloaded the Certificates in all Certificate Stores successfully.
2 14:38:01.321 04/08/13 Sev=Info/4 CM/0x63100002
Begin connection process
3 14:38:01.335 04/08/13 Sev=Info/4 CM/0x63100004
Establish secure connection
4 14:38:01.335 04/08/13 Sev=Info/4 CM/0x63100024
Attempt connection with server "asgardvpn.dyndns.info"
5 14:38:02.380 04/08/13 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with 79.52.36.120.
6 14:38:02.384 04/08/13 Sev=Info/4 IKE/0x63000001
Starting IKE Phase 1 Negotiation
7 14:38:02.388 04/08/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Frag), VID(Nat-T), VID(Unity)) to 79.52.36.120
8 14:38:02.396 04/08/13 Sev=Info/4 IPSEC/0x63700008
IPSec driver successfully started
9 14:38:02.396 04/08/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
10 14:38:02.460 04/08/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 79.52.36.120
11 14:38:02.460 04/08/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, VID(Unity), VID(dpd), VID(?), VID(Xauth), VID(Nat-T), KE, ID, NON, HASH, NAT-D, NAT-D) from 79.52.36.120
12 14:38:02.506 04/08/13 Sev=Info/6 GUI/0x63B00012
Authentication request attributes is 6h.
13 14:38:02.460 04/08/13 Sev=Info/5 IKE/0x63000001
Peer is a Cisco-Unity compliant peer
14 14:38:02.460 04/08/13 Sev=Info/5 IKE/0x63000001
Peer supports DPD
15 14:38:02.460 04/08/13 Sev=Info/5 IKE/0x63000001
Peer supports DWR Code and DWR Text
16 14:38:02.460 04/08/13 Sev=Info/5 IKE/0x63000001
Peer supports XAUTH
17 14:38:02.460 04/08/13 Sev=Info/5 IKE/0x63000001
Peer supports NAT-T
18 14:38:02.465 04/08/13 Sev=Info/6 IKE/0x63000001
IOS Vendor ID Contruction successful
19 14:38:02.465 04/08/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT, NAT-D, NAT-D, VID(?), VID(Unity)) to 79.52.36.120
20 14:38:02.465 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
21 14:38:02.465 04/08/13 Sev=Info/4 IKE/0x63000083
IKE Port in use - Local Port = 0xCEFD, Remote Port = 0x1194
22 14:38:02.465 04/08/13 Sev=Info/5 IKE/0x63000072
Automatic NAT Detection Status:
Remote end is NOT behind a NAT device
This end IS behind a NAT device
23 14:38:02.465 04/08/13 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
24 14:38:02.502 04/08/13 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 79.52.36.120
25 14:38:02.502 04/08/13 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 79.52.36.120
26 14:38:02.502 04/08/13 Sev=Info/4 CM/0x63100015
Launch xAuth application
27 14:38:07.623 04/08/13 Sev=Info/4 CM/0x63100017
xAuth application returned
28 14:38:07.623 04/08/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 79.52.36.120
29 14:38:12.656 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
30 14:38:22.808 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
31 14:38:32.949 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
32 14:38:43.089 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
33 14:38:53.230 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
34 14:39:03.371 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
35 14:39:13.514 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
36 14:39:23.652 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
37 14:39:33.807 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
38 14:39:43.948 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
39 14:39:54.088 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
40 14:40:04.233 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
41 14:40:14.384 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
42 14:40:24.510 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
43 14:40:34.666 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
44 14:40:44.807 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
45 14:40:54.947 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
46 14:41:05.090 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
47 14:41:15.230 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
48 14:41:25.370 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
49 14:41:35.524 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
50 14:41:45.665 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
51 14:41:55.805 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
52 14:42:05.951 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
53 14:42:16.089 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
54 14:42:26.228 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
55 14:42:36.383 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
56 14:42:46.523 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
57 14:42:56.664 04/08/13 Sev=Info/6 IKE/0x63000055
Sent a keepalive on the IPSec SA
58 14:43:02.748 04/08/13 Sev=Info/4 IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=2B1FFC3754E3B290 R_Cookie=73D546631A33B5D6) reason = DEL_REASON_CANNOT_AUTH
59 14:43:02.748 04/08/13 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, DWR) to 79.52.36.120
60 14:43:03.248 04/08/13 Sev=Info/4 IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=2B1FFC3754E3B290 R_Cookie=73D546631A33B5D6) reason = DEL_REASON_CANNOT_AUTH
61 14:43:03.248 04/08/13 Sev=Info/4 CM/0x63100014
Unable to establish Phase 1 SA with server "asgardvpn.dyndns.info" because of "DEL_REASON_CANNOT_AUTH"
62 14:43:03.248 04/08/13 Sev=Info/5 CM/0x63100025
Initializing CVPNDrv
63 14:43:03.262 04/08/13 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 0.
64 14:43:03.262 04/08/13 Sev=Info/4 IKE/0x63000001
IKE received signal to terminate VPN connection
65 14:43:03.265 04/08/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
66 14:43:03.265 04/08/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
67 14:43:03.265 04/08/13 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
68 14:43:03.265 04/08/13 Sev=Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
And this is the conf from the 1801:
hostname xxx
boot-start-marker
boot-end-marker
enable secret 5 xxx
aaa new-model
aaa authentication login xauthlist local
aaa authorization network groupauthor local
aaa session-id common
dot11 syslog
no ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.0.1.1 10.0.1.10
ip dhcp excluded-address 10.0.1.60 10.0.1.200
ip dhcp excluded-address 10.0.1.225
ip dhcp excluded-address 10.0.1.250
ip dhcp pool LAN
network 10.0.1.0 255.255.255.0
default-router 10.0.1.10
dns-server 10.0.1.200 8.8.8.8
domain-name xxx
lease infinite
ip name-server 10.0.1.200
ip name-server 8.8.8.8
ip name-server 8.8.4.4
ip inspect log drop-pkt
ip inspect name Firewall cuseeme
ip inspect name Firewall dns
ip inspect name Firewall ftp
ip inspect name Firewall h323
ip inspect name Firewall icmp
ip inspect name Firewall imap
ip inspect name Firewall pop3
ip inspect name Firewall rcmd
ip inspect name Firewall realaudio
ip inspect name Firewall rtsp
ip inspect name Firewall esmtp
ip inspect name Firewall sqlnet
ip inspect name Firewall streamworks
ip inspect name Firewall tftp
ip inspect name Firewall vdolive
ip inspect name Firewall udp
ip inspect name Firewall tcp
ip inspect name Firewall https
ip inspect name Firewall http
multilink bundle-name authenticated
username xxx password 0 xxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group xxx
key xxx
dns 10.0.1.200
wins 10.0.1.200
domain xxx
pool ippool
acl 101
crypto ipsec transform-set myset esp-3des esp-sha-hmac
crypto ipsec transform-set xauthtransform esp-des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
dsl operating-mode adsl2+
hold-queue 224 in
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Vlan1
ip address 10.0.1.10 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
ppp authentication chap callin
ppp pap sent-username aliceadsl password 0 aliceadsl
crypto map clientmap
ip local pool ippool 10.16.20.1 10.16.20.200
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 0.0.0.0 0.0.0.0 10.0.1.2
ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static udp 10.0.1.60 1056 interface Dialer0 1056
ip nat inside source static tcp 10.0.1.60 1056 interface Dialer0 1056
ip nat inside source static tcp 10.0.1.60 3111 interface Dialer0 3111
ip nat inside source static udp 10.0.1.60 3111 interface Dialer0 3111
ip nat inside source list 101 interface Dialer0 overload
access-list 101 remark *** ACL nonat ***
access-list 101 deny ip 10.0.1.0 0.0.0.255 10.16.20.0 0.0.0.255
access-list 101 permit ip 10.0.1.0 0.0.0.255 any
access-list 150 remark *** ACL split tunnel ***
access-list 150 permit ip 10.0.1.0 0.0.0.255 10.16.20.0 0.0.0.255
control-plane
line con 0
no modem enable
line aux 0
line vty 0 4
password xxx
scheduler max-task-time 5000
end
Anyone can help me ?
Sometimes the vpn can be vreated using the iPhone or iPad vpn client...I am having a simuliar issue with my ASA 5505 that I have set up. I am trying to VPN into the Office. I have no problem accessing the Office network when I am on the internet without the ASA 5505. After I installed the 5505, and there is internet access, I try to connect to the Office network without success. The VPN connects with the following error.
3 Dec 31 2007 05:30:00 305006 xxx.xx.114.97
regular translation creation failed for protocol 50 src inside:192.168.1.9 dst outside:xxx.xx.114.97
HELP? -
Problem with VPN Client and PIX 7.0(5)
Hi, i have a problem configuring my pix 525 7.0(5) as a remote vpn server. I already configure the pix
sollowing this instructions (http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml)
and i can establish a vpn using CISCO VPN Client; but i can't reach any resource from my inside network or any network define in the PIX.
I think that could be a missing nat or an acl; but i have do a lot of research but i can figure out the solution.
This is the configuration i apply
access-list cryptomap-scada extended permit ip any 172.10.0.0 255.255.255.0
access-list acl-vpn-sap-remoto extended permit ip any 172.16.42.64 255.255.255.224
access-list acl-vpn-sap-remoto extended permit icmp any 172.16.42.64 255.255.255.224
access-list acl-vpn-sap-remoto extended permit ip any any
access-list acl-vpn-sap-remoto extended permit icmp any any
ip local pool pool_vpn_sap 172.*.*.1-172.10.0.254 mask 255.255.255.0
nat (inside) 0 access-list cryptomap-scada
group-policy VPN_SAP_PED internal
group-policy VPN_SAP_PED attributes
vpn-filter value acl-vpn-sap-remoto
vpn-tunnel-protocol IPSec
username vpnuser password **** encrypted
username vpnuser attributes
vpn-group-policy VPN_SAP_PED
crypto ipsec transform-set vpn-cliente-remoto esp-3des esp-md5-hmac
crypto dynamic-map vpn-remoto-dymap 7 set transform-set vpn-cliente-remoto
crypto dynamic-map vpn-remoto-dymap 7 set reverse-route
crypto map siemens-scada-map 7 ipsec-isakmp dynamic vpn-remoto-dymap
isakmp policy 7 authentication pre-share
isakmp policy 7 encryption 3des
isakmp policy 7 hash sha
isakmp policy 7 group 2
isakmp policy 7 lifetime 43200
tunnel-group VPN_SAP_PED type ipsec-ra
tunnel-group VPN_SAP_PED general-attributes
address-pool pool_vpn_sap
default-group-policy VPN_SAP_PED
tunnel-group VPN_SAP_PED ipsec-attributes
pre-shared-key clavevpnsap
Thanks in AdvancedHi, thanks for you response, if i remove the acl form de vpn filter, i get the same problem (i can't reach any host). This is the output from the command that you ask for.
PIX-Principal(config)# show running-config nat
nat (inside) 0 access-list cryptomap-scada
nat (inside) 9 JOsorioPC 255.255.255.255
nat (inside) 9 GColinaPC 255.255.255.255
nat (inside) 9 AlfonsoPC 255.255.255.255
nat (inside) 9 AngelPC 255.255.255.255
nat (inside) 9 JerryPC 255.255.255.255
nat (inside) 9 EstebanPC 255.255.255.255
nat (inside) 9 GiancarloPC 255.255.255.255
nat (inside) 9 WilliamsPC 255.255.255.255
nat (inside) 9 PerniaPC 255.255.255.255
nat (inside) 9 ElvisDomPC 255.255.255.255
nat (inside) 8 LBermudezPC 255.255.255.255
nat (inside) 9 HelpDeskPC 255.255.255.255
nat (inside) 9 OscarOPC 255.255.255.255
nat (inside) 9 AnaPC 255.255.255.255
nat (inside) 9 RobertoPC 255.255.255.255
nat (inside) 9 MarthaPC 255.255.255.255
nat (inside) 9 NOCPc5-I 255.255.255.255
nat (inside) 9 NOCPc6-I 255.255.255.255
nat (inside) 9 CiraPC 255.255.255.255
nat (inside) 9 JaimePC 255.255.255.255
nat (inside) 9 EugemarPC 255.255.255.255
nat (inside) 9 JosePC 255.255.255.255
nat (inside) 9 RixioPC 255.255.255.255
nat (inside) 9 DaniellePC 255.255.255.255
nat (inside) 9 NorimarPC 255.255.255.255
nat (inside) 9 NNavaPC 255.255.255.255
nat (inside) 8 ManriquePC 255.255.255.255
nat (inside) 8 MarcialPC 255.255.255.255
nat (inside) 8 JAlbornozPC 255.255.255.255
nat (inside) 9 GUrdanetaPC 255.255.255.255
nat (inside) 9 RVegaPC 255.255.255.255
nat (inside) 9 LLabarcaPC 255.255.255.255
nat (inside) 9 Torondoy-I 255.255.255.255
nat (inside) 9 Escuque-I 255.255.255.255
nat (inside) 9 Turbio-I 255.255.255.255
nat (inside) 9 JoseMora 255.255.255.255
nat (inside) 8 San-Juan-I 255.255.255.255
nat (inside) 8 Router7507 255.255.255.255
nat (inside) 8 NOCPc4-I 255.255.255.255
nat (InterfaceSAN) 8 MonitorHITACHI-I 255.255.255.255 -
Performance Problems with Excel Client
Hello all,
We installed BPC 7.5 SP7 NW on our customeru2019s system and experience massive performance problems on our local clients in combination with Excel and MS Office in general.
u2022When opening u201CMaintain Dimension Membersu201D it takes some time (approx. 2 min) to open the Excel Sheet with the elements. The u201CSave to Serveru201D as well as the u201CProcess Dimensionu201D also takes time to execute. When executing u201CProcess Dimensionu201D the sandbox appears and it takes approx 2 min until the Process popup window appears. The process itself has normal performance.
u2022We also experienced slow performance with the opening or saving dynamic templates dialogue in the Excel Client. It takes some time until this dialogue appears.
In general, we experience slow performance every time BPC is opening a pop up window! We also experience slow performance when opening a (non BPC) MS Office document.
In order to resolve this issue we looked at the following notes and forum entries:
Notes: 1541181, 1531059, 1507575, 1479436, 1448502, 1288810
Forum: BPC NW slow Performance (Expand, Refresh, Saving) - How to enhance it?, [BPC for Excel] Dimension clicked, then Excel hangs
Can anybody give me tipps on how to solve this issue?
Thanks in AdvanceHi,
It will work if in IE, Advanced, Security you uncheck "Check for publisher's certificate revocation "
=======================
http://CSC3-2004-crl.verisign.com/CSC3-2004.crl
http://ocsp.verisign.com/MFEwTzBNMEswSTAJBgUrDgMCGgUABBQ%2FxkCfyHfJr7GQ6M658NRZ4SHo%2FAQUCPVR6Pv%2BPT1kNnxoz1t4qN%2B5xTcCEH6eR%2B%2FPmw5g6qZVJ2HNXK4%3D
http://crl.verisign.com/pca3.crl
=========================
Regards to all,
Laurentiu Bogdan -
Discoverer Viewer Locale language - problems with data retrieved
Hi all, I have a very strange problem.
I'm using Discoverer Viewer 10g and when I connect to the same eul/database using Locale: Locale retrieving from browser, I see all my data different from "0" into my report; if I choose Greek as Greek's language I see ONLY "0" as data.
All the queries for the reports are always the same, but something has problems with the language chosen.
This doesn't happen, for example if I choose another language (Italian or French for example), but ONLY with Greek !!!!
Anyone have had a similar problem in the past ?
Thanks in advance
AlessandroIt appears as though there is a general JDBC problem. Please make sure your JDBC client is up to date with the Server. We have seen data conversion problems when there was a mismatch.
Maybe you are looking for
-
CV() in Model clause
Hi, Although this query returns 6 rows of data (2 rows having data, and rest of the rows are having NULL values), where as my requirement is to to get the following output: RUN_SEQ USAGE_PERIOD_START_DATE_D USAGE_PERIOD_END_DATE_D 1 01-Jan-13 30-Jan-
-
Error while posting PR to an internal order
Hi, We are getting the error as "ME 299 Error in commitments check" while creating PR against an Internal order. We have analyzed the issue from the budget perspective for IO and found that there is adequate amount (in K023 ) for the order. The error
-
TS1363 why does my iphone 3gs not recognize my sim card?
I can't activate my iphone 3gs.. Its not recognizing my sim card.. what do I need to do?
-
There's a very interesting list in http://otn.oracle.com/oramag/webcolumns/2003/techarticles/burleson_cbo_pt2_l1.html, but its format isn't nice. Could you please help me ?
-
Can't export file as pdf?
trying to export idd cs6 file as pdf and get message "cannot save to the file... you may not have permission or the file may be in use. I tried closing the idd file but then cannot save -- catch 22!!!