Local Storage Setting Not Persisting.

Hi all,
I'm having a problem trying to increase the local storage
setting in my Flash Player. Since I installed the flash player the
local storage setting was set to None. Each time I try to increase
it and then go back to settings panel it has reset itself to None.
I think this is an issue with my machine, is there anything that
could cause this problem? Permissions on a directory perhaps? I
have seen that local storage information is stored in
%APPDATA%/Macromedia/Flash Player... but this directory does not
exist for my user.
Thanks in advance,
Paul

I am having the same problem. I even used the online Global
Manager and it kept going back to zero!
I am also having problems with the "Display" hardware
accelerator keeping my flash from going
to fullscreen. I can't uncheck the stupid thing! I am Going
step after step of uninstalling everything
completely and re-installing it again. Vista came with the
2nd version before this new one and it didn't
have the hardware accelerator option. It worked fine with IE,
but I use Firefox and had to download the newest
and achiest. If I find a solution, I will definitely write
back with it.

Similar Messages

How do i change my local storage setting.

i am trying to get an app and its 151 mb i have 280 mb free and its telling me i need more local storage and to go to settings but i cant figure it out

You need to delete some items from your iPod. To purchase/download/install an app can take about three times the file-download size.

MTU setting not persistent?

Hello Guys sorry if this has been posted. I need some help, I've been trying to set my network MTU setting manually however everytime I reboot my MBP it always go back to automatic configuration. I'm aware that you have to be the system admin to change the setting. Do I really have to configure my MTU everytime I reboot my MBP or Am I missing something here? Thanks in advance...

??
1500 is the largest possible value. You can't use a value higher than that. If you entered a value of 1600 in the terminal you were probably using a value of 100.
Usually people suffering from problems caused by MTU find relief using values of 1490 or even 1492.

Archiving Logging message on Local Storage device not work XR 4.3.2

Hi XR folks,
I enabled this feature on XR 4.3.2 as following configuration,
logging archive
device harddisk
severity notifications
file-size 5
frequency daily
archive-size 100
archive-length 4
The issue is,
There have no Archiving logging file be generated on each weekly directory as following output command.
RP/0/RSP1/CPU0:ASR9010#dir harddisk:/var/log/2015/02 location 0/RSP0/CPU0
Fri Feb 20 14:08:43.822 BKK
Directory of net/node0_RSP0_CPU0/harddisk:/var/log/2015/02
20562674    drwx 4096        Sun Feb 1 07:00:00 2015 01
20562675    drwx 4096        Sun Feb 8 07:00:00 2015 08
6576652288 bytes total (5195808256 bytes free)
RP/0/RSP1/CPU0:ASR9010#dir harddisk:/var/log/2015/02/01 location 0/RSP0/CPU0
Fri Feb 20 14:09:55.756 BKK
Directory of net/node0_RSP0_CPU0/harddisk:/var/log/2015/02/01
No files in directory
6576652288 bytes total (5195806208 bytes free)
RP/0/RSP1/CPU0:ASR9010#dir harddisk:/var/log/2015/02/08 location 0/RSP0/CPU0
Fri Feb 20 14:10:00.169 BKK
Directory of net/node0_RSP0_CPU0/harddisk:/var/log/2015/02/08
No files in directory
6576652288 bytes total (5195805696 bytes free)
Could anyone can suggest me to troubleshoot for root cause of this issue.
Thank you in advance,
Satit

Hi folks,
I'm suspecting if any issue on path harddisk and logging severity,
So i changed the path to disk1 , as following configuration.
logging archive
device disk1
severity debugging
file-size 5
frequency daily
archive-size 100
archive-length 4
I found new symptom,
The log file was created, but Zero bytes of content of file.
RP/0/RSP0/CPU0:PN1#dir
Wed Feb 25 13:23:27.697 BKK
Directory of disk1:/var/log/2015/02
49818       drwx 4096        Wed Feb 25 10:45:51 2015 22
12884885504 bytes total (12881689600 bytes free)
RP/0/RSP0/CPU0:PN1#cd 22
RP/0/RSP0/CPU0:PN1#dir
Wed Feb 25 13:23:31.016 BKK
Directory of disk1:/var/log/2015/02/22
49882       -rw- 0           Tue Feb 24 17:10:22 2015 syslog.24.1
49883       -rw- 0           Wed Feb 25 10:45:51 2015 syslog.25.1
RP/0/RSP0/CPU0:PN1#more disk1:/var/log/2015/02/22/syslog.24.1
Wed Feb 25 13:24:05.464 BKK
RP/0/RSP0/CPU0:PN1#more disk1:/var/log/2015/02/22/syslog.24.1
Wed Feb 25 13:24:07.519 BKK
Thank you in advance,
Satit

How can I allow or block the use of local storage by specific sites for all users in my domain.

How can I allow or block the use of local storage by specific sites for all users in my domain.
I tried to do this by MMS.cfg but it is not working, the problem is also described in your blog "http://forums.adobe.com/message/3272907".
What I Want -: "I want to allow youtube for all the users in my domain and this should be listed in Control panel-->flash player-->storage-->local storage setting by site-->websites tab."

Wow, cor-el... Did you -intend- your reply to be inane, inappropriate and completely inapplicable?
How would that possibly do what I asked?
You -might- consider '''''reading''''' the question, -=before=- you reply. And it's really okay to NOT REPLY if you just don't know. Just an idea.
Feel better, real soon.

Adobe Flash Player 10 - Enable Local Storage Issue

Hi all,
Having and issue after upgrading to Flash Player 10 from 9.
Some chat room applications are indicating that they cannot run
since local storage is not enabled. If I log into the PC as the
domain admin everything works fine. If a regular user logs in, that
message appears. What has adobe changed in Flash Player 10 that I
need to update?
Thanks.

Me too!
On both IE8 and Firefox. Win 7 32 bit on IBM T42 - 1GB ram.
Old laptop I know but the 10.1.x.x Flash Players worked just fine. Problem started with 10.2.152.26 flash player.
Now BBC TV live and iPlayer work just fine, however YouTube does not - audio but no video. Just a black rectangle where the video should be.
Right click to get the menu and "settings" is greyed out. However select the pop-out option and the video plays. Right click on the pop-out and "settings" is available. So deselect "enable hardware acceleration", close the pop-out and refresh the window (F5) and now YouTube videos play. Switch hardware acceleration back on and now they don't.
This video works fine with hardware acceleration enabled. http://www.adobe.com/products/flashplayer/features/video/h264/
These also work. http://www.adobe.com/devnet/flashplayer/stagevideo.html
Something broken in 10.2, I think.

Local storage resource need and use. How it difference from actual VM instance drives?

Hi,
I am not able to quite understand the use of local storage resource that we configure from service definition file. The local storage is not durable and provides access same as file storage we would typically use in local environment like c:\my.txt.
As this local storage is not durable; so is the information stored on (for example C drive) role instance VM. So what is the advantage we get by using local storage resource? Instead we can save it on C drive of role instance VM. Why local storage
is recommended instead of using VM's drive?
Please let me know your views.
Mark As Answer if it helps you |
My Blog

Hi,
>>So what is the advantage we get by using local storage resource?
Because of the local storage is not durable, On a cloud service, we can create a small local storage where you can save temporary files, this is a powerful model for some scenarios, , especially highly scalable applications, please have
a look at below articlesfor more details.
#http://vkreynin.wordpress.com/2010/01/10/learning-azure-local-storage-with-me/
#http://www.intertech.com/Blog/windows-azure-local-file-storage-how-to-guide-and-warnings/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Deleting IMAP account & local storage

I accidentally deleted an old domain which had an imap account plugged into Apple Mail. Not a big disaster and I have moved all the emails into local storage that used that domain.
Q. If I delete the account in apple mail's prefs, it suggests all email (local) associated with that domain will be deleted. Is this true ?
Thanks
J

On My Mac folders (what I assume you refer to as local storage) are not impacted from the removal of an account. Only the mailboxes/folders in that IMAP account folder would be affected.
Ernie

Setting Storage Classification on Local Storage (e.g. local SSDs.)

Hi all, I'm integrating SCVMM 2012 SP1 on Windows Server 2012 R2 Hyper-V with XenDesktop 7. When defining storage resources in XenDesktop, it can see the 'Local Storage' classification from SCVMM and use that for VM placement.
What this does though, is treat all local disks that have been marked by SCVMM as 'Available for Placement' as that Local Storage. (i.e. in the SCVMM console, view the properties of a Hyper-V host, select 'Available for placement' on specified volumes under
Hardware and then under Storage view the Storage Classifications on each physical drive.
Instead, I'd like to be able to treat each physical direct attached drive as a separate location for XenDesktop VM placement. To that end, I've been looking at setting a different storage classification for each physical drive I'm targeting. I assume this
is the right approach as XenDesktop looks to query SCVMM for the storage classifications to define VM placement.
When attempting to change a storage classification on a physical drive in the host properties in SCVMM, I receive the following error:
Virtual Machine Manager
VMM is unable to process one of the provided parameters for the cmdlet (Set-SCStorageDisk):
Cannot convert 'System.Object[]' to the type 'Microsoft.SystemCenter.VirtualMachineManager.StorageDisk' required by parameter 'StorageDisk'. Specified method is not supported.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 12416
OK
Directly running the PowerShell code returns the same error (as you would expect).
$vmHost = Get-SCVMHost -ID "31ddbd43-b14f-42a1-9326-710b45eec45d"
$storageClassification = Get-SCStorageClassification -Name "Local Drive D" -ID "a818fcbb-3346-49c4-837b-df2be834f7f7"
$hostDisk = Get-SCStorageDisk -VMHost $vmHost -Name "\\.\PHYSICALDRIVE0"
Set-SCStorageDisk -StorageDisk $hostDisk -StorageClassification $storageClassification -JobGroup "40edcf09-239e-496e-8dce-84b5eec02bb3" -Verbose
Set-SCVMHost -VMHost $vmHost -JobGroup "40edcf09-239e-496e-8dce-84b5eec02bb3" -RunAsynchronously -VMPaths "C:\ProgramData\Microsoft\Windows\Hyper-V|D:\" -BaseDiskPaths ""
Interestingly, if I change $hostDisk to $hostDisk[0], the Set-SCStorageDisk line runs and produces no error, but this does not actually achieve the desired effect.
Can anyone offer some thoughts or reasons why I would be seeing this? Or am I going about this the wrong way (and thus failing).
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Moderator Action:
Your post has been moved to the ASM Installation forum space for better topic alignment.
You are attempting to install and/or configure ASM and the forum members that monitor the ASM Installation space will have much more familiarity with whatever you're going to go through..

Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer.

Using a Windows 2012 RDS Environment, we have users connecting to a CPD website, and as part of the CPD they need to run a systems checker. When they run the systems checker they get the following error message: "Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer". All users are connecting to this environment with Windows CE Clients,I have checked the setting on Adobe Flash and they seem correct but as each user has its own profile on the RDS session, is there something that I should be setting for each user. I have added the website to the trusted sites and it has made no difference. Any ideas

It sounds like what's happening is that Flash Player can't write or read from the local shared objects in the user's redirected home directory because we disallow traversing junctions in the broker process. This behavior was disabled to address a vulnerability identified in some of John Forshaw's research into the IE broker last year.
You can enable this behavior by adding the following setting to mms.cfg:
EnableInsecureJunctionBehavior=1
That said, you can probably gather from the name of the flag that we don't really recommend this approach, and disable this attack surface by default. There's some risk that a network attacker could craft content that abuses fundamental issues with how Windows handles Junctions to write to arbitrary locations.
Unfortunately, there's not a simple or easy workaround that I'm aware of (but it's been ages since I've administered a Windows domain) for this kind of NAS/SAN-backed terminal server environment where Flash is not able to access \Users\<user>\AppData\Roaming\Macromedia\Flash Player\ without traversing a junction.

I get a pop up of "adobe flash player settings" requesting local storage and it will not respond to either deny or accept. Help please

I get a pop up of "adobe flash player settings" requesting local storage. It will not respond to either deny or accept. Please help.

From the menu bar, select
           ▹ System Preferences... ▹ Flash Player ▹ Storage
Select either one of the radio buttons marked
          Allow sites to save information on this computer
          Block all sites from storing information on this computer
according to your preference. The usual display of Flash content doesn't require that you allow it to save information. Note also that this setting only affects Flash; it has no effect on web cookies or AutoFill.

V2V - Hyper-V 2012R2 / SCVMM 2012R2- ESX to HV - Local storage not recognised in conversion wizard?

Hi,
I am in the final stages of testing for our move from VMWare to Hyper-V. I am currently testing migrations of VMWare VMs to Hyper-V. I've connected SCVMM to the vCentre server and attached to the ESX hosts so I can see all the VMs in the
VMM console.
My Hyper-V servers are running in a failover cluster and have shared storage as well as local storage for less important VMs. When I run the Convert VM Wizard I can't see the local storage listed when selecting a storage location for the newly converted
VM. It appears that VMM assumes that the VMWare VM is high availability and thus only shows me the shared clustered drives. Its not HA in VMWare. although the ESX host is a enterprise version. This theory is born out when I've converted a
VWMare VM to Hyper-V I click on the migrate button to move it to the local storage in the new target server location screen I get a tick box, that is ticked, showing the VM is HA. When I deselect it I can then select local storage and migrate the
VM over.
Is there any way of stopping VMM pre-setting the VMWare VMs as HA so I can select the local storage in the conversion wizard?
Any help gratefully received.
Rob

Hi Simar
Thanks for the advice, I've now got the VM back in a stable state and running HA.
Just to finish off the thread for future I did the following
- Shutdown the VM
- Remove the VM from the Failover Cluster Manager (as you say this did leave the VM configuration intact)
- I was unable to import the VM as per your instructions so I copied the VHD to another folder on the local storage and took a note of the VM configuration.
- Deleted the VM from VMM so this removed all the configuration details/old VHD.
- Built a new VM using the details I saved from the point above
- Copied the VHD into the new VMs folder and attached it to the VM.
- Started it up and reconfigured networking
- Use VMM to make the VM HA.
I believe I have found the reason for the initial error, it appears there was a empty folder in the Snapshot folder, probably from an old Checkpoint that hadn't cleaned up properly when it was deleted.
The system is up and running now so thanks again for the advice.
Rob

I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

5GB is typically not enough space to download a movie. Often, movies take from 3 - 5 GB to begin with. The only option you have is to delete more things from your iPad. You can remove unused Apps, pictures, music, text message (messages with pictures can take up a lot of space), email messages, books, magazines etc.

How do I download a movie to my phone? when I click 'rent' through itunes, I get a message that there is not enough available local storage, but I can manage my local device storage usage in 'Settings'. I have activated icloud, but this has not helped.

How do I download a movie to my iphone 3G? When I click 'rent' in itunes, I get a message that there is not enough available local storage, but I can manage storage on my device in 'Settings'. I have activated icloud, but don't know how to change my storage so that I can rent and watch the movie on my phone. thanks for any help you can give.

I always do my Rentals with the itunes program on the computer.
Make rental from itunes store. It will show in movies under library, DO NOT click to play it. Plug in the device to the computer. Click the name of the device on left. Click on movies. There is an option to copy to the device. Sync. obviously you still need space on ipad to put rental but you can have it take computers hard drive space until you need it.

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

Local Storage Setting Not Persisting.

Similar Messages

Maybe you are looking for