Archiving Logging message on Local Storage device not work XR 4.3.2
Hi XR folks,
I enabled this feature on XR 4.3.2 as following configuration,
logging archive
device harddisk
severity notifications
file-size 5
frequency daily
archive-size 100
archive-length 4
The issue is,
There have no Archiving logging file be generated on each weekly directory as following output command.
RP/0/RSP1/CPU0:ASR9010#dir harddisk:/var/log/2015/02 location 0/RSP0/CPU0
Fri Feb 20 14:08:43.822 BKK
Directory of net/node0_RSP0_CPU0/harddisk:/var/log/2015/02
20562674 drwx 4096 Sun Feb 1 07:00:00 2015 01
20562675 drwx 4096 Sun Feb 8 07:00:00 2015 08
6576652288 bytes total (5195808256 bytes free)
RP/0/RSP1/CPU0:ASR9010#dir harddisk:/var/log/2015/02/01 location 0/RSP0/CPU0
Fri Feb 20 14:09:55.756 BKK
Directory of net/node0_RSP0_CPU0/harddisk:/var/log/2015/02/01
No files in directory
6576652288 bytes total (5195806208 bytes free)
RP/0/RSP1/CPU0:ASR9010#dir harddisk:/var/log/2015/02/08 location 0/RSP0/CPU0
Fri Feb 20 14:10:00.169 BKK
Directory of net/node0_RSP0_CPU0/harddisk:/var/log/2015/02/08
No files in directory
6576652288 bytes total (5195805696 bytes free)
Could anyone can suggest me to troubleshoot for root cause of this issue.
Thank you in advance,
Satit
Hi folks,
I'm suspecting if any issue on path harddisk and logging severity,
So i changed the path to disk1 , as following configuration.
logging archive
device disk1
severity debugging
file-size 5
frequency daily
archive-size 100
archive-length 4
I found new symptom,
The log file was created, but Zero bytes of content of file.
RP/0/RSP0/CPU0:PN1#dir
Wed Feb 25 13:23:27.697 BKK
Directory of disk1:/var/log/2015/02
49818 drwx 4096 Wed Feb 25 10:45:51 2015 22
12884885504 bytes total (12881689600 bytes free)
RP/0/RSP0/CPU0:PN1#cd 22
RP/0/RSP0/CPU0:PN1#dir
Wed Feb 25 13:23:31.016 BKK
Directory of disk1:/var/log/2015/02/22
49882 -rw- 0 Tue Feb 24 17:10:22 2015 syslog.24.1
49883 -rw- 0 Wed Feb 25 10:45:51 2015 syslog.25.1
RP/0/RSP0/CPU0:PN1#more disk1:/var/log/2015/02/22/syslog.24.1
Wed Feb 25 13:24:05.464 BKK
RP/0/RSP0/CPU0:PN1#more disk1:/var/log/2015/02/22/syslog.24.1
Wed Feb 25 13:24:07.519 BKK
Thank you in advance,
Satit
Similar Messages
-
USB Storage devices not working with kernel in repositories [Solved]
I am experiencing a quite vexing problem with my USB Mass Storage devices, when I plug one in I get the following error in my dmesg:
[ 1811.976758] usb 2-2: new high speed USB device number 5 using ehci_hcd
[ 1812.101854] scsi7 : usb-storage 2-2:1.0
[ 1813.102576] scsi 7:0:0:0: Direct-Access Verbatim STORE N GO 2.68 PQ: 0 ANSI: 2
[ 1813.103818] sd 7:0:0:0: [sdb] 3913728 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 1813.104327] sd 7:0:0:0: [sdb] Write Protect is off
[ 1813.104331] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 1813.105567] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1813.105572] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.107560] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1813.107565] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.108340] sdb: sdb1
[ 1813.112180] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1813.112186] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1813.112190] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 1813.196828] sdb: detected capacity change from 2003828736 to 0
In the /dev/ folder on the device shows up, not the partitions. When I try to open it with cfdisk I get "FATAL ERROR: Cannot open disk drive". I am pretty sure it iss neither a hardware problem with my laptop or my usb devices, as they both work on my dual-booted Ubuntu. My usb ports in general seem to be functioning, I can still charge a phone through them and use my built in USB webcam.
I am not sure where exactly this issue lies, it started after I upgraded to 3.0.7 (among other updates) from the normal repositories, but still persisted after I downgraded to 3.0.6.
My attempts at Googling have so far revealed mainly hardware errors, which don't seem to fit with the devices working on another OS on the same pc.
Thanks.
Last edited by MartianW (2011-11-09 16:30:15)Same problem. I try to mount different devices. For each device same result.
The file /var/log/error.log is full of this kind of messages:
Nov 4 21:34:18 moria kernel: [ 113.455195] sd 6:0:0:0: [sdb] No Caching mode page present
Nov 4 21:34:18 moria kernel: [ 113.455200] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:35:29 moria kernel: [ 184.077728] sd 7:0:0:0: [sdb] No Caching mode page present
Nov 4 21:35:29 moria kernel: [ 184.077736] sd 7:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:35:29 moria kernel: [ 184.080720] sd 7:0:0:0: [sdb] No Caching mode page present
Nov 4 21:35:29 moria kernel: [ 184.080730] sd 7:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:35:30 moria kernel: [ 184.808109] sd 7:0:0:0: [sdb] No Caching mode page present
Nov 4 21:35:30 moria kernel: [ 184.808116] sd 7:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:41:10 moria kernel: [ 525.107109] sd 8:0:0:0: [sdb] No Caching mode page present
Nov 4 21:41:10 moria kernel: [ 525.107114] sd 8:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:41:10 moria kernel: [ 525.110615] sd 8:0:0:0: [sdb] No Caching mode page present
Nov 4 21:41:10 moria kernel: [ 525.110619] sd 8:0:0:0: [sdb] Assuming drive cache: write through
Nov 4 21:41:11 moria kernel: [ 525.841487] sd 8:0:0:0: [sdb] No Caching mode page present
Nov 4 21:41:11 moria kernel: [ 525.841491] sd 8:0:0:0: [sdb] Assuming drive cache: write through -
USB Thumbdrive causes "Mass Storage Device Not Responding"...
Everytime I connect a thumbdrive to my MBP, I cannot eject it. I always get the "disk in use" message.
When I go into Activity Monitor, I see "Mass Storage Device Not Responding" and it's eating up a lot of system resources.
After a short period of time, the fan will come on full blast, and stay on until I force the program to quit.
The only way I can eject the thumbdrive is to force quit through Activity Monitor.
I've tried multiple thumbdrives on every USB port and I get the same result.
I've searched through the Support site, but haven't found a solution.Hi @Eman_Gamal
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your USB ports are no longer functioning correctly. When you checked Device Manager under device status you see this message" cannot verify the digital signature for the drivers required for this device".
As they were previously working have you tried rolling back the drive in Device Manager?
Have you ran the HP Support Assistant to acquire any HP updates?
Have you tried using MS Fix it ?
Here is a link to the recommended drivers for your notebook. HP Pavilion dv6-6c45se Entertainment Notebook PC Drivers Please ensure you have all the latest updates installed.
If the above has not helped as it was previously working you could try a restore back to a known good date.
Using Microsoft System Restore (Windows 7)
Lastly you could do a recover back to factory.
Performing an HP system recovery (Windows 7)
There is an opportunity during the recovery to backup your personal files to prevent data loss. Now is the time to do one if not previously done.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
At any time you may contact HP support for assistance. They can remotely access your system tto help you overcome difficulties.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Runtime error R6025 message after log on to Vista - Flash Card not working
Hi
I'm a newbie & would appreciate any advice.
I am getting a runtime error message R6025 when I log on to Windows Vista.
When I click out of the box I then get a message saying Toshiba Flash Card not working.
I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
Sorry if I sound thick
Thanks
NeelieHi
I found this MS knowledge base article:
+Description of the R6025 run-time error in Visual C++\+
http://support.microsoft.com/kb/125749
But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
Bye -
Dual-Boot; Restart and boot other o/s USB devices not working
I have issue with my msi z97-g43 mobo and Windows dual o/s PC.
Booting with win-8.1, USB devices working very well.Restaring windows 8.1 have NOT any issue.
After shutdown & start PC, choosing to boot windows 7 on bootmanager, USB devices not working in Win-7.
System no hang or occur any error/BSOD message.All startup programs run as normal.
I tried to re-plug usb devices but notting happens... Still not working
But after the win-8.1 shutdown, if i switch off PSU power button, watting ~1 munute for discharge.
After power up PC and boot with windows 7 all usb devices works normaly.
I checked all internal connections. 2 times disassembly all hardware and re-built system, nothing changed.All windows updates and latest drivers installed.
I'm sure other H/W is OK, but I thnik this mobo have a fault.Thank you for reply.My PC system specs:
CPU: Intel Pentium G3258 3.2ghz
Board: MSI Z97-G43 /Bios: Ver. V17.7
MEM: G.Skill Ripjaws 2x4gb DDR3-1600mhz cl9 1.5v F3-12800CL9-4GBRL
VGA: Sapphire AMD Redeon HD6670
CASE: Zalman z3 plus white (5x 120mm fan)
PSU: Thermaltake Litepower 500w (12v1+12v2=36amp)
HDD-1: Seagate 1TB ST1000DM003 /HDD-2: Seagate 2TB ST2000DM001
COOLER: Akasa 92mm PWM Blue Led
OC: CPU:Default /MEM: X.M.P mode=1600mhz 9-9-9-24-2t 1.5v
O/S: Win7 x64 PRO + Win8.1 x64 PRO (Genuine)
All hdd's have MBR based partition table.Windows 7 & 8.1 installed in non-efi mode.In BIOS Boot sequence is setting up to non-efi Boot(system) drive as primary.
Before I suspect maybe have a short circuit to pcb or similar thing cause this issue.I take out all parts outside the chassis, and ran this system on the antistatic bag and box.Nothing has been changed.
I have Cooler Master Devastator(MB24 + MS2k) USB keyb+mouse set and tplink wn722n usb wireless dongle.
I have one more pc,based on AMD 970+SB950 chipset mainboard and AMD CPU.I exchange all parts to this amd mainbaord and tested for faulted hardware.All intel system H/W's is ok.All works great
Dual boot works perfectly.Not needs to switch off psu/power back and run system again.
I think msi z97-g43 mainbıoard have a problem. -
After upgrading ACS 3.3.1 to 4.2 on windows the local database is not working
Hi,
I have upgaded the ACS 3.3.1 for windows server to 4.2. Everything went fine but the local database is not working.
The CD is an upgrade kit from 3.x to 4.2 on windows. I tried to install directly the 4.2 I was able to install but integration with AD/LDAp is not working. Anysay its an upgrade kit so I cant expect it shoud work when install drectly the 4.2 but by upgrading from 3.3 to 4.2 everything should work fine.
I followed the upgradation path as recomended.
Also we have a requirment that once it is upgraded to 4.2 we need to shift the whole thing from the physical server to a virtual machine on VMware ESX server 3.5.
Can anybody pls guide me if anything else to do after the upgradation.
Thanks & Regards
SachiHi Javier,
First of all I was facing a problem of restoring the old database of 3.3 to 4.2. Somehow I overcame that issue by following the below steps. Now local authentication is working fine but AD/other External database authentication is not working. As you told the setting for the unknown users are configured to fetch the credentials from the external database if it is not in the local database.
Do we need to do anything in the AD itself?
Regards
Sachi
Steps for ACS upgrade to 4.2 version
Below are the requested steps mentioned for the up gradation from ACS 3.3.2 to ACS 4.2.
1) Take a configuration backup from existing ACS. ACS--->System
configuration----> ACS Backup
2) now if you have ACS 3.3.2 on server. take backup of the ACS
3) Insert the cd or if you have the set up on the system then Run the setup of ACS 3.3.4. During the process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
4) Once you are at 3.3.4, take a backup and keep it handy.
5) Run the setup of 4.1.1. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.1 upgrade.
6)Once you are at 4.1.1.24 take a backup and keep it handy.
7) Run the setup of 4.2. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.2 upgrade.
8) Once you are at 4.2 take a backup and keep it handy. Now run the
patch 12 and take a backup again.
9) Now fresh install 4.2 on your new production server and install patch
12. Restore the 4.2 patch 12 backup and you should be all set. -
Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?
You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html
-
I have an Ipod Touch, it appears inactive and says "connect to Itunes". When I connect to the PC, the PC says "USB device not working". How could do to solve this problem?
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!
iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
Computers are not airplay compatible unless you have downloaded an app to make them so.
User to user forum, so I don't care if you switch to android or any other threats you make. -
My laptop biometric device not working.
HI,
I am facing one problem with my hp pavilion dv6 6160se biometric device not working and i also lost my recovery deta. kindly provide me the solution.
and my system also very slow how can i make it fast.
m. asifHi there @Sweeto684
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your fingerprint reader is not working and that your system is running very slow, but please clarify what you mean by saying you lost the recovery data. Are you referring to the factory recovery image stored on your system, or are you meaning something else?
I am happy to help you with all of this, but need to know more before I can make some useful recommendations. I want to avoid having you do something that could cause a problem with something else, until I know what problem really is.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems
Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.
-
iphone 4S will not charge, error that USB device not working, found any suggestions?
Hello Chambless,
The troubleshooting steps below can help get your iPhone to charge.
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Allen -
USB storage devices not being recognised
Product:
13" Macbook Pro w/ Retina Display (Late 2013 model)
OS X Yosemite (version 10.10.2)
2.4GHz i5, 8gb 1600 MHz DDR3, 256gb HDD
Issue:
- macbook unable to recognise USB storage devices.
- can be found on disk utility but 'greyed out'.
- cannot be found under devices in finder.
- tried restarting laptop, no effect.
- additional storage via Nifty + 64gb micro SD is working fine.
- apple products (iPod/iPhone/iPad) and printer/scanner working fine, only storage devices appear to be affected.
- USB-ethernet adapter appears to be working w/o problems too.
- last technical thing done to the computer was SMC reset 5 days ago for power cable light not working properly (fixed with reset).
Hello everyone,
I seem to having some issues with my macbook and the ability to use USB storage devices. The SD card slot appears to be working fine as I have a nifty device attached on. I'm not sure exactly when this started to happen but it was working last week for sure.
I've put some succinct notes above for anyone who is willing to help out and is able to use it to determine the problem but I don't think it's a hardware issue. Maybe it's a bug with the new OS X update over the weekend?
I've attached a screenshot of the disk utility below as well.
If anyone could help me out then that would be greatly appreciated.
Thanks in advance!Some users on another Apple thread had success in running Kext Utility last November with similar issues.
I ran kext utility 2.6.1, restarted my computer and everything was working again. -
Local Storage Setting Not Persisting.
Hi all,
I'm having a problem trying to increase the local storage
setting in my Flash Player. Since I installed the flash player the
local storage setting was set to None. Each time I try to increase
it and then go back to settings panel it has reset itself to None.
I think this is an issue with my machine, is there anything that
could cause this problem? Permissions on a directory perhaps? I
have seen that local storage information is stored in
%APPDATA%/Macromedia/Flash Player... but this directory does not
exist for my user.
Thanks in advance,
PaulI am having the same problem. I even used the online Global
Manager and it kept going back to zero!
I am also having problems with the "Display" hardware
accelerator keeping my flash from going
to fullscreen. I can't uncheck the stupid thing! I am Going
step after step of uninstalling everything
completely and re-installing it again. Vista came with the
2nd version before this new one and it didn't
have the hardware accelerator option. It worked fine with IE,
but I use Firefox and had to download the newest
and achiest. If I find a solution, I will definitely write
back with it. -
External storage device not showing up in finder
I have an imac with an external storage device for back-up. Up to now when I turned on the device it would show up in Finder. Now it's not. I have checked the connections (firewire), restarted the computer but it's not showing up. What should I do or try?
TRY THIS SOLUTION, EASY!
I'm a GOOD mac user. Not a genius, but pretty good, used it for years.
BUT SOMEHOW THIS ESCAPED ME:
In the finder, on the left side, scrol down to DEVICES.
Mouse over slowly to the right of that word and it says SHOW/HIDE.
Well.. Mine were hidden!
That's it!
Maybe you are looking for
-
I've downloaded the driver several times. rebooted - verify pref's - and it still gives me the same message. very very very very annoying. "Can't install the software for the Canon iP100 series because it is not currently available from the Software
-
What is the largest SSD Drive for my MacBook pro 8,2?
What is the largest solid state drive I can install in my MacBook pro 15" (Version 8,2 - i7 2.3 GHz) with 8GB RAM I currently am running OS X 10.6.8 But I want to upgrade to Mavericks 10.9 and perform a clean install with Mavericks and manually move
-
Inserting Leads into a Text File?
Hello there, I am wondering if there is a way to insert leads into a .txt file once a form is submitted? If so how would this be achieved. I know you can do this with PHP as I have done it before. Thanks Derek Bess
-
how to load external html page into flash? (AS3)
-
Clicking on Dock icon only brings most-recently-used window to front
In Leopard, clicking on the iChat Dock icon would bring all iChat windows (contact lists, chats, etc.) in front of other open applications, and give focus to the most recently used iChat window. After installing Snow Leopard, clicking on the iChat Do