Locating correct drivers for kernel [solved]

So I was practicing kernel building today and decided to become more adventurous I am going through each line and removing anything that is not specific to my computer, but I am running into an issue. Here is an example.
Hardware monitoring support.
To find the correct driver I use the scripts from lm_sensors. I do not see it in the list, so I do a search and find Intel Core/Core2/Atom temperature sensor, but there are no options to select it or anything.
So my question why? Did Arch already build this when I installed the first time?
Last edited by mich04 (2012-04-10 11:18:57)

Ok thanks, say I ran
hwdetect --modules
but I was not able to find most of the ones it listed. which is strange because if they are listed than there has to be some record of them some where.

Similar Messages

GTX680-Mac_What are the Correct Drivers for 10.8.5?

GTX680 on MacPro5, mid 2010.... and having issues. What are the correct drivers for Mac GeForce GTX680? And is there another driver for the OS as well? Or not in use when using GTX?
I can not export without my system completely shutting down....many attempts...AME and direct. Using CUDA.
Phil

I'm not sure of the proper process to post crash logs so apologize for long text...but I am really needing help
MacPro5, mid 2010
OS 10.8.5 Mtn Lion
PPro 2014_2 build 8.2
64 GB RAM
current Cuda: 6.5.37
GTX680-2GB RAM
3min seq...5760x864...I know large. Edit clips...mostly mp4 with lots of repo and scaling but no other FX. Export to h284 or mp4 crashes system...tried OpenCL...CUDA...AME and Direct...but some success (vry slow) with softwr only. Can not export. Did cineform in 30sec chunk and struggle thru it.
Tried different CUDA versions...reinstalled CC2014_2
Any ideas?
Here is one of the many logs:
Interval Since Last Panic Report: 263815 sec
Panics Since Last Report:          5
Anonymous UUID:                    AD95F73E-7904-DFA2-7B2C-2376C652F401
Tue Jan 20 20:29:34 2015
panic(cpu 2 caller 0xffffff8002eb8945): Kernel trap at 0xffffff7f844b4633, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000008, CR3: 0x0000000191d2f011, CR4: 0x00000000000206e0
RAX: 0xffffff8080325628, RBX: 0xffffff807b2fae00, RCX: 0x0000000000000000, RDX: 0xffffff87093e3778
RSP: 0xffffff87093e3740, RBP: 0xffffff87093e37b0, RSI: 0xffffff87093e3778, RDI: 0x0000000000000001
R8: 0xffffff87093e32a0, R9: 0xffffff87093e3298, R10: 0xffffff8080325608, R11: 0x0000000000000000
R12: 0xffffff80783064c0, R13: 0xffffff80783064b0, R14: 0xffffff808e702608, R15: 0xffffff8078306400
RFL: 0x0000000000010283, RIP: 0xffffff7f844b4633, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000008, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff87093e33e0 : 0xffffff8002e1d636
0xffffff87093e3450 : 0xffffff8002eb8945
0xffffff87093e3620 : 0xffffff8002ecebfd
0xffffff87093e3640 : 0xffffff7f844b4633
0xffffff87093e37b0 : 0xffffff7f844b38f4
0xffffff87093e3860 : 0xffffff7f844c0668
0xffffff87093e38d0 : 0xffffff7f84486c60
0xffffff87093e3910 : 0xffffff7f8447c20f
0xffffff87093e3a90 : 0xffffff7f844a8a0b
0xffffff87093e3b50 : 0xffffff7f8447aea1
0xffffff87093e3ba0 : 0xffffff800326f789
0xffffff87093e3bc0 : 0xffffff8003270d30
0xffffff87093e3c20 : 0xffffff800326e74f
0xffffff87093e3d70 : 0xffffff8002e98c21
0xffffff87093e3e80 : 0xffffff8002e20b4d
0xffffff87093e3eb0 : 0xffffff8002e10448
0xffffff87093e3f00 : 0xffffff8002e1961b
0xffffff87093e3f70 : 0xffffff8002ea6546
0xffffff87093e3fb0 : 0xffffff8002ecf473
      Kernel Extensions in backtrace:
         com.apple.GeForceWeb(8.1.7)[B1C23155-23F5-39D0-8037-7FFB273DA8C6]@0xffffff7f84469000->0xf fffff7f84534fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff7f83417000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xffffff7f835b c000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0xffffff7f8 3579000
            dependency: com.apple.NVDAResmanWeb(8.1.7)[CA80D169-93F0-36E0-AAD0-9A255D45C036]@0xffffff7f835d0000
BSD process name corresponding to current thread: Adobe Premiere P
Boot args: nvda_drv=1 darkwake=8
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide:     0x0000000002c00000
Kernel text base: 0xffffff8002e00000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 1380434831924
last loaded kext at 248531634318: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f84f9a000, size 65536)
last unloaded kext at 308976154466: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f84f9a000, size 57344)
loaded kexts:
com.nvidia.CUDA 1.1.0
com.paceap.kext.pacesupport.snowleopard 5.8
com.Cycling74.driver.Soundflower 1.6.6
com.logmein.driver.LogMeInSoundDriver 1.0.3
com.rogueamoeba.HermesAudio 4.1.0
com.sonnettech.driver.SonnetSATA 2.2.9
com.owc.driver.Accelsior 1.0 b2
com.apple.filesystems.smbfs 1.8.4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.1.7f2
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.13.14
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.GeForceWeb 8.1.7
com.apple.driver.AppleMikeyDriver 2.4.7fc4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.IOUSBAttachedSCSI 1.0.4
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleUSBHub 635.4.0
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.Intel82574L 2.3.0b5
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBUHCI 621.4.0
com.apple.driver.AppleUSBXHCI 635.4.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f2
com.apple.nvidia.gk100halWeb 8.1.7
com.apple.NVDAResmanWeb 8.1.7
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f2
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.6
com.apple.driver.AppleUSBHIDKeyboard 170.2.4
com.apple.driver.AppleHIDKeyboard 170.2.4
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.5
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 530.5
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 64 GB, SMC 1.39f11
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM 1, 16 GB, DDR3 ECC, 1066 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: DIMM 2, 16 GB, DDR3 ECC, 1066 MHz, 0x8394, 0x393731393830410000000000000000000000
Memory Module: DIMM 5, 16 GB, DDR3 ECC, 1066 MHz, 0x0000, 0x000000000000000000000000000000000000
Memory Module: DIMM 6, 16 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54343247523741465234432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 2 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: FireWire, FireWire, fw0
PCI Card: NVIDIA GeForce GTX 680, sppci_displaycontroller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: pci1b73,1100, Slot-2
PCI Card: pci1b4b,9230, sppci_ahci, Slot-3
PCI Card: Sonnet Tempo SATA E4P, sppci_ide, Slot-4
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: OWC Mercury Accelsior PCIe SSD, 119.88 GB
Serial ATA Device: Hitachi HDS723020BLA642, 4 TB
Serial ATA Device: WDC WD1001FALS-41Y6A0, 1 TB
Serial ATA Device: Samsung SSD 840 EVO 500GB, 500.11 GB
Serial ATA Device: MARVELL VIRTUALL
USB Device: G-RAID, 0x4971, 0x8027, 0x07400000 / 3
USB Device: G-RAID, 0x4971, 0x8027, 0x07200000 / 2
USB Device: G-RAID, 0x4971, 0x8027, 0x07100000 / 1
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa200000 / 2
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfa220000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 3
USB Device: CTH-670, 0x056a (WACOM Co., Ltd.), 0x00df, 0x1d100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50a, 0x3d100000 / 2
FireWire Device: built-in_hub, 800mbit_speed

Correct Drivers For Ethernet MacBook Pro Late 2008 Windows XP on BootCamp

Hi;
I have a late 2008 unibody MacBook Pro running OSC 10.5.8. When I first got it I setup a dual boot with Win XP using Bootcamp.
The problem I have is that the Ethernet NIC port has stopped working and has a yellow exclamation in SYSTEM (its fine in OSX). I have uninstalled it but cannot install the drivers as I do not know what to install.
In SYSTEM HARDWARE it was listed as nForce but I do not know which version of nForce chipset is used in the MacBok Pro. Someone has mentioned upgrading Bootcamp but I do not know which version I currently have and it has also been suggested to simply re-use the drivers from the original install CD, I have them but cannot see where to get the drivers from.
Any help would be great.
Ta

I'm looking into running Windows 7 64bit on the exact same MBP you have, so I'm curious as to whether or not you've found a solution yet outside of the forums.
Do you think it might be that the bootcamp 3.1 update is only for Windows 7 32bit and not for the 64bit version?

Can't Install proprietary drivers for HD5770(SOLVED)

I just bought a radeon HD5770 and I've been having trouble trying to install the proprietary linux driver with
sh ./ati-driver-installer-10-11-x86.x86_64.run.I add fglrx to to mod list in /etc/rc.conf and nomodeset to my
kernel line in /boot/grub/menu.lst.When i reboot kde wont start and i get an error saying:
Fatal:module fglrx not found and then im stuck at the cli where i have to uninstall the driver and re-edit
my files so kde will load.I.ve been to the wiki serval times with no luck. any help installing this would be great.
THX
Edit
I figured it it out,i had xf86-video-ati,hd video driver and ati-dri installed once i dealt with that it was fairly easy and learning how to use abs didn't hurt either
Last edited by unilx (2010-12-07 10:23:33)

Running directly ati installer is not the arch way... you have to read this
https://wiki.archlinux.org/index.php/ATI_Catalyst

Unable to locate drivers for my HP DV7 3178CA laptop

Hi,
I reinstalled Windows 7 on my HP DV7 3178CA laptop and am unable to locate the drivers for the following hardware IDs:
PCI\VEN_197B&DEV_2384&SUBSYS_365C103C&REV_00
PCI\VEN_197B&DEV_2384&SUBSYS_365C103C
PCI\VEN_197B&DEV_2384&CC_088000
PCI\VEN_197B&DEV_2384&CC_0880
Can you point me in the right direction?
This question was solved.
View Solution.

Hi,
Download and install the JMicron Card Reader driver on the following link.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45010.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Drivers for Windows Server 2008 and HDD issues

Recently I have had the hard drive with my OS fail. After replacing the hard drive and reinstalling windows server 2008 I seem to have run into a few issues with drivers. After insalling Windows, I had 3 items in my device manager that did not install properly. I was able to get the driver for the LAN port to work but I have not gotten the driver for "Standard VGA Graphics Adapter" and "SM Bus Controller". After a little research, I believe the video card is a Radeon HD4350. With that information I still have been unable toinstlal the correct drivers for either of these items. I've tried several drivers listed on the drivers support page on HP's website but all fo them return the same error about not finding the correct Operating System. The link to the driver I used originally on my previous installation seems to not be valid any longer.
Also I can't seem to access the two additoinal hard drives (connected by sata). They were used with the previous installation of windows with no issues. They appear in the device manager but do not show up under My Computer. A removeable drive does show up that I'm not sure what it is. Previously I had used software to mirror one of the drives onto the other as to prevent losing data if a drive would fail. Is one of the above drives causing the issue with not being able to access the drives or did the software used before cause the problem?
Any help on these issues is greatly appreciated.
This question was solved.
View Solution.

OK.
I can't help you with the drives then. That is out of my realm of knowledge. If they are marked healthy and active in the disk management utility, then that is all I know that they should be indicated.
As for the graphics driver...
Download and install this free file utility.
http://www.7-zip.org/
After you install 7-zip, right click on the graphics driver file and select 7-zip from the list of options.
Select 7-zip to Extract to: and let it extract the file into a folder. I let it extract to the file name of the folder.
Then just follow the rest of my instructions to install the driver.
Of course you will first browse to where 7-zip has extracted the folder to, and proceed from there.

Looking for Win 7 64bit drivers for CQ58-d61SG

Hello,
I installed a win7 on a CQ58-d61SG that came pre-installed with win8.
The Laptop will now go to a customer of us that wanted us to install win 7 on it.
Now the issue is, that I can't seem to find the correct drivers for win7 since there are only win8 drivers listedon the support page.
Feel free to let me know of any additional information you might need.
Help would be much appreciated, thank you in advance.
This question was solved.
View Solution.

Hi:
Most if not all of the W7 x64 drivers from this model should work on that one. Do not use the BIOS and firmware files.
http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-2000-2a00-notebook-pc-series/5259212/model/52...
In addition, you will need the amd chipset driver.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_118001_1

No drivers for 15-p245sa only option to order recovery media

Hi there,
I am trying to downgrade to windows 7 but i cannot even locate the drivers for Windows 8.1
Any advice? Thank you

HP site is experiencing a major glitch the last 2 days. "Missing drivers" has been reported & is being worked on.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Drivers for USB, Ethernet Controller, etc

I am not able to locate the drivers for a few of my hardware devices. The hardware IDs are:
USB-Controller:
PCI\VEN_8086&DEV_1E31&SUBSYS_1818103C&REV_04
PCI\VEN_8086&DEV_1E31&SUBSYS_1818103C
PCI\VEN_8086&DEV_1E31&CC_0C0330
PCI\VEN_8086&DEV_1E31&CC_0C03
SM-buscontroller:
PCI\VEN_8086&DEV_1E22&SUBSYS_1818103C&REV_04
PCI\VEN_8086&DEV_1E22&SUBSYS_1818103C
PCI\VEN_8086&DEV_1E22&CC_0C0500
PCI\VEN_8086&DEV_1E22&CC_0C05
PCI-unit:
PCI\VEN_10EC&DEV_5229&SUBSYS_1818103C&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_1818103C
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
Ethernet-controller:
PCI\VEN_10EC&DEV_8168&SUBSYS_1818103C&REV_07
PCI\VEN_10EC&DEV_8168&SUBSYS_1818103C
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200
Hope you can help out. Thank you very much!
This question was solved.
View Solution.

Hi:
Below are the links to the drivers you need...
PCI\VEN_8086&DEV_1E22: Install this driver first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102471-1&cc=us&dlc=en&lc=en...
PCI\VEN_8086&DEV_1E31:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103655-1&cc=us&dlc=en&lc=en...
PCI\VEN_10EC&DEV_5229:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102462-1&cc=us&dlc=en&lc=en...
PCI\VEN_10EC&DEV_8168:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102459-1&cc=us&dlc=en&lc=en...

Drivers for HP 255 G3 Latino version

Hello, I bought an HP 255 G3 in Argentina, I did a full format and install Windows 7 64bit version.
The problem that I found is that I cannot find the correct drivers for it. I entered in HP drivers page and specify this model and donwloaded all drivers but yet they dont work. I have left Wireless, USB and a few more devices that this drivers dont match at all.
Please I need to solve this, can anyone help me?
Thanks.

Hi:
Download and install the amd chipset drivers and reboot. That should install the smbus and usb3 controllers.
http://support.amd.com/en-us/download/chipset?os=Windows+7+-+64
I don't know what model wireless network card your model uses, so please do the following steps so I can figure that out and then I will post the links to the drivers you need.
Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category. The network controller device will have a little ! mark next to it.
So, find the network controller device, click on that and then click on the Details tab.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the third item (Hardware ID's).
Post the top string of characters you see in the window.
You can do the same process for the other drivers you need.

Satellite P500 (PSPE8U) - Can't find drivers for it

Hi there,
I've been up and down these forums to no avail. I've looked at loads of forums for drivers for my P500. I've been through the support pages of the toshiba websites of australia, Europe, Uk and japan.. no luck either. I've tried to contact the ebay seller I bought it from, apparently he's out of business now. Needless saying that the laptop came without any driver disk. Unfortunately one of the hard drives died on me and didn't have time to do a recovery disk with all the drivers. So now I'm really stuck. These are the details of the laptop should anyone have any brain wave for me -
P500 - PSPE8U
Windows Vista 64bit
ATI HD 4650
At the moment the biggest headache are the video drivers and my battery life is close to 30 mins without the toshiba software. The stock resolution is disasterous without the right driver. I tried the ATI46** drivers from their website but the application tells me that my hardware is not supported.
Any help would be much appreciated.
Thanks
Chris

Hi Chris,
Satellite P500 with PSPE8U model number belongs to the US models and therefore all drivers and tools you can find on Toshiba US page:
http://www.csd.toshiba.com
Just check the bottom side of your notebook again for exact model number like P500-S1234, then you can find the correct drivers for you model. :)

Drivers for HP Compaq 15-s008tu Notebook PC

Dear Team, My notebook model is Compaq 15-s008tu Notebook PCOS : Windows 7, 64 bit I couldnt find the right drivers for following devices being listed at Drivers 1. Bluetooth controller Hardware ID: PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C&REV_00 2. Network Controller Hardware Id : PCI\VEN_1814&DEV_3290&SUBSYS_18EC103C&REV_00 3. SM Bus controller Hardware id : PCI\VEN_8086&DEV_9C22&SUBSYS_2211103C&REV_04 Kindly help in locating right drivers for these.

Hi: You need these drivers... SM Bus controller: Use the one directly from Intel and reboot. https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng Wireless: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0004 Bluetooth: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137961-1&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0009

MS6178 Onboard Sound Drivers for Win98?

Hi,
I recently had to install Windows 98 (1st edition) on my computer and am having difficulties locating the Drivers for the Onboard Sound for this particular version of Windows and my MS 6178 Mainboard. I have managed to find them for Windows 98SE and attempted to install those ones, but it keeps on telling me that my OS is the wrong version. I have searched this website, but just cannot find any for Win 98, and not for Win98SE. Can anyone here help? Thanks!

Try http://www.Driversguide.com
Use the basic search enter Soundmax and set the operating system to Win98.
You should find what you're after.
Try http://members.driverguide.com/index.php?action=dosearch&qm0=soundmax&qa7=1399&dp=2&sm=b&jmd=and&fzz=d
you have to register firts, but it costs noothing (and there's no junk email)
cheers
Dunedin67

How To: Identifying and locating the correct driver for your device

I installed a new version of windows 7 on my laptop. But im having issues locating the right drivers for it., Nothing is working correctly and its so Annoying. Can Anyone help me. When i put in the model number it says its not found, But its a satelitte L577D-35204 or the serial no. is XXXXXXXXX. Please help me. Thanks.
[Moderator edit to remove serial number.]
Solved!
Go to Solution.

satelitte L577D-35204 - can you check the model number again this does not look right. also add the part number is on the tag. SEE PICTURE-
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****
Attachments:
how to find model number.png ‏1082 KB

Need to compile nvidia driver for a custom kernel [SOLVED]

I compiled a custom kernel following this wiki page: http://wiki.archlinux.org/index.php/Ker … rom_Source
I can boot into it just fine. I now want to compile an nvidia driver for use with it and followed the steps on this wiki page: http://wiki.archlinux.org/index.php/NVI … tom_kernel
I run into a problem when makepkg trys to compile it. Here is the output:
$ cd ~/devel/abs/nvidia/
$ makepkg -c
==> Making package: nvidia-my 190.42-1 x86_64 (Thu Nov 5 17:42:29 EST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found NVIDIA-Linux-x86_64-190.42-pkg0.run in build dir
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-190.42-pkg0.run ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-190.42-pkg0
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 190.42..................................................................................................................................................
If you are using a Linux 2.4 kernel, please make sure
you either have configured kernel sources matching your
kernel or the correct set of kernel headers installed
on your system.
If you are using a Linux 2.6 kernel, please make sure
you have configured kernel sources matching your kernel
installed on your system. If you specified a separate
output directory using either the "KBUILD_OUTPUT" or
the "O" KBUILD parameter, make sure to specify this
directory with the SYSOUT environment variable or with
the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the
kernel headers) were installed, you may need to specify
their location with the SYSSRC environment variable or
the equivalent nvidia-installer command line option.
*** Unable to determine the target kernel version. ***
make: *** [select_makefile] Error 1
==> ERROR: Build Failed.
Aborting...
The step it's choking on is (from the PKGBUILD), "make SYSSRC=/lib/modules/${_kernver}/build module || return 1"
What am I doing wrong?
My PKGBUILD:
pkgname=nvidia-my
pkgver=190.42
_kernver='2.6.32-rc6-MINE'
pkgrel=1
pkgdesc="NVIDIA drivers for kernel26."
arch=('i686' 'x86_64')
[ "$CARCH" = "i686" ] && ARCH=x86
[ "$CARCH" = "x86_64" ] && ARCH=x86_64
url="http://www.nvidia.com/"
depends=('kernel26>=2.6.31' 'kernel26<2.6.32' "nvidia-utils=${pkgver}")
conflicts=('nvidia-96xx' 'nvidia-173xx')
license=('custom')
install=nvidia.install
source=("http://download.nvidia.com/XFree86/Linux-$ARCH/${pkgver}/NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run")
md5sums=('f94806feee87de756d14fe3e9bcaf05a')
[ "$CARCH" = "x86_64" ] && md5sums=('ae431ff849ec01446e6724f9fcfe3bb4')
build() {
cd $srcdir
sh NVIDIA-Linux-$ARCH-${pkgver}-pkg0.run --extract-only
cd NVIDIA-Linux-$ARCH-${pkgver}-pkg0
cd usr/src/nv/
ln -s Makefile.kbuild Makefile
make SYSSRC=/lib/modules/${_kernver}/build module || return 1
mkdir -p $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
install -m644 nvidia.ko $pkgdir/lib/modules/${_kernver}/kernel/drivers/video/
sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/nvidia.install
My nvidia.install
post_install() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
post_upgrade() {
post_install
rmmod nvidia || echo 'In order to use the new nvidia module, exit Xserver and unload it manually.'
post_remove() {
KERNEL_VERSION='2.6.32-rc6-MINE'
depmod $KERNEL_VERSION
Last edited by graysky (2009-11-07 10:54:33)

Hello,
I'm kind of a noob and am trying to get follow the directions from the Nvidia wiki on installing on a custom kernel. I'm trying to use the abs method to install on kernel26rt version 2.6.33rt. I followed directions exactly and am getting an error that I didn't find on any other posts. Can you please take a look? Here is my terminal:
[jsadural@jlinux nvidia]$ makepkg -ci
==> Making package: nvidia-2633rt 270.30-3 (Wed Mar 30 08:53:08 PDT 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading NVIDIA-Linux-x86_64-270.30-no-compat32.run...
--2011-03-30 08:53:08-- ftp://download.nvidia.com/XFree86/Linux … mpat32.run
=> “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part”
Resolving download.nvidia.com... 69.31.121.43
Connecting to download.nvidia.com|69.31.121.43|:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD (1) /XFree86/Linux-x86_64/270.30 ... done.
==> SIZE NVIDIA-Linux-x86_64-270.30-no-compat32.run ... 30037601
==> PASV ... done. ==> RETR NVIDIA-Linux-x86_64-270.30-no-compat32.run ... done.
Length: 30037601 (29M) (unauthoritative)
100%[======================================>] 30,037,601 696K/s in 42s
2011-03-30 08:53:50 (696 KB/s) - “NVIDIA-Linux-x86_64-270.30-no-compat32.run.part” saved [30037601]
==> Validating source files with md5sums...
NVIDIA-Linux-x86_64-270.30-no-compat32.run ... Passed
==> Extracting Sources...
==> Starting build()...
Creating directory NVIDIA-Linux-x86_64-270.30-no-compat32
Verifying archive integrity... OK
Uncompressing NVIDIA Accelerated Graphics Driver for Linux-x86_64 270.30........................................................................................................................
NVIDIA: calling KBUILD...
test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
mkdir -p /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions ; rm -f /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.tmp_versions/*
make -f scripts/Makefile.build obj=/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel
cc -Wp,-MD,/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/.nv.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/include -I/usr/src/linux-2.6.33-rt/arch/x86/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=2048 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fno-dwarf2-cfi-asm -fconserve-stack -I/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"270.30\" -Wno-unused-function -mcmodel=kernel -mno-red-zone -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c
In file included from /usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess.h:573:0,
from include/linux/poll.h:13,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:84,
from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h: In function ‘copy_from_user’:
/usr/src/linux-2.6.33-rt/arch/x86/include/asm/uaccess_64.h:35:6: warning: comparison between signed and unsigned integer expressions
In file included from /home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:13:0:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h: At top level:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:251:35: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv-linux.h:1436:5: error: expected specifier-qualifier-list before ‘nv_spinlock_t’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_alloc_file_private’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1993:5: error: implicit declaration of function ‘semaphore_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1994:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: implicit declaration of function ‘atomic_spin_lock_init’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:1995:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_poll’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2790:30: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: implicit declaration of function ‘atomic_spin_lock_irqsave’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2793:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: implicit declaration of function ‘atomic_spin_unlock_irqrestore’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:2804:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_close_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3595:18: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3611:22: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_kern_write_registry’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3703:51: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3710:45: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:3720:9: error: ‘nv_file_private_t’ has no member named ‘off’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_post_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4330:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4347:5: error: ‘nv_file_private_t’ has no member named ‘waitqueue’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4348:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c: In function ‘nv_get_event’:
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4362:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4365:9: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.c:4390:5: error: ‘nv_file_private_t’ has no member named ‘fp_lock’
make[3]: *** [/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel/nv.o] Error 1
make[2]: *** [_module_/home/jsadural/devel/abs/nvidia/src/NVIDIA-Linux-x86_64-270.30-no-compat32/kernel] Error 2
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [module] Error 1
make: *** [module] Error 2
==> ERROR: A failure occurred in build().
Aborting...
thanks,
jason

Locating correct drivers for kernel [solved]

Similar Messages

Maybe you are looking for