Location Aplliance will not synch network design

2710 Location appliance running 4.0.33.0, WCS running 4.2.130.
2 Campus Network Designs each with multiple buildings and floors. One can be assigned to the location server and synchroization works perfectly. The second network design shows unassigned. If I assign it to the location appliance and then sychronize network designs it reverts to unassigned.
Has anyone run into this issue and been able to resolve it?

1) Connect to LOCAPP CLI
2) Stop the LOC Service(/etc/init.d/locserverd stop)
3) Take the backup of Loation DB which can be found at /opt/locserver/db/linux/server-eng.db
i.e. copy the server-eng.db to some other directory e.g. /home
4) Delete the DB by issuing the command
rm -f /opt/locserver/db/linux/server-eng.db
5) Start the LOC service (/etc/init.d/locserverd start)
6) Perform the sync. through WCS
Hope this will help you...

Similar Messages

  • My Apple TV (1st Gen) will not synch with iTunes on my Laptop

    I've been trying to do this for a while, it shouldn't be too difficult i think.
    All i want to do is synch all the content on my laptop with my Apple TV (and vice versa) so all the content including photos and home videos is the same on both my Apple TV and my laptop.
    Some points:
    There's enough hard drive space on both
    I'm using Windows 7 ultimate on my laptop
    The correct port exceptions have been added to Windows Firewall
    I have purchases on both my laptop and Apple TV from the iTunes store
    We're using a wireless network and it while it's possible to get them both cable wired, it would be a pain
    Home networking is set up in iTunes on my laptop
    I've set up my Apple TV to synch (not stream) with my account on my laptop
    Both iTunes and Apple TV are up to date with their downloads
    I think that's it - am i missing anything, or should this now just work?
    Cheers
    David

    As per the question, really...
    "My Apple TV (1st Gen) will not synch with iTunes on my Laptop"
    There's no error messages
    Only the films i've bought on my AppleTV appear on my AppleTV
    It's been synching for over 4 hours and hasnt got past the first film and the progress bar is not moving
    David

  • Acrobat 9 Pro will NOT install (CS4 Design Premium)

    Acrobat 9 Pro will NOT install (CS4 Design Premium)
    Acrobat Pro 9 will not install (FAILED), although every other program on the CS4 DVDs did install properly.
    I have followed the instructions, and have tried with no programs running, not even virus protection (which is an insane thing for Adobe to demand of a product being installed where the installation routine is expecting an Internet connection): FAILED.
    I uninstalled my Acrobat 6 Pro, (a standalone Pro version that I had to have  a few years ago.) I uninstalled that working program knowing I had no idea where my original Adobe Acrobat CD is located, so I was essentially cutting myself off of Acrobat Pro if the Acrobat 9 Pro install continued to fail.
    I reported this to Adobe support online.
    I have followed the instructions to disable startup items and services, then tried the Acrobat 9 Pro install: FAILED.
    At that point, I gave up installing Acrobat 9 Pro. I didn't have any more time to screw with it - I would re-visit the installation failure later.
    Lo and behold, a client sent me a PDF file of a brochure, in an email, and I had to grab some text from it to put on his website (Done in Dreamweaver CS4.) Well, damn, now I'll have to go back and get that install to work...FAILED!
    Suspecting a problem in the installation routine on the DVD, I decided to download the trial version of Acrobat 9 Pro. So, I did. It downloaded and installed without a hiccup, and I had Acrobat 9 Pro working for 30 days...
    I did what I had to do, using the trial version, then figured I would re-visit the installation issue later, when I had a few hours to dedicate to all the hell of calling Adobe software support, handholding, maybe registry edits, multiple reboots, and multiple attempts at doing everything again, just so the support person would know that I did follow all the steps correctly to prove thw outcome is sill FAILED!
    Oh crap, I got another PDF file. No problem, I thought, I don't need to edit the PDF, just read it. When I tried to open the file, Acrobat 9 Pro plastered a screen over the program - the screen saying my 30 day trial version has now run out, demanded a serial number, or quit. My CS4 serial number would not activate it, and so I had to quit, not even being able to read the PDF file.
    So, I un-installed the trial version of Acrobat 9 Pro that had installed without a hitch and had worked flawlessly for 30 days.
    Now I'm going to have to visit hell, and get the software that I paid hundreds of dollars for to work...
    Please STOP and NOTE: Acrobat 9 Pro installed perfectly from the downloaded Internet version. What does that tell you? There are no operating system issues, no hardware compatibility issues  (which I knew anyway, as the OS and hardware is up to date.) Even more significantly, there is no issue with the Windows registry, or other versions of Adobe Acrobat that had been installed before in the machine. My conclusion was that it has to be a problem with the installation routine on the CS4 disks.
    So, I spent an hour on the phone with Adobe personnel: software support, to customer service, to sales, to customer service, and back to sales. After software support came to the conclusion that I needed to UNINSTALL ALL OF CS4, and run a clean-up utility, I knew I had to try getting a new set of DVDs and hope the installation routine problems/bugs had been worked out.
    After being batted back and forth by Adobe Customer Service and Adobe Sales, I finally got someone to agree to send a set of DVDs to me.
    I got the DVDs. I tried to install Adobe Acrobat 9 Pro: FAILED
    As I told the software support person, I do not want to un-install the entire CS4 suite. I have all of those programs working fine, and have about a dozen web sites within Dreamweaver CS4 painstakingly set up and active, and some of them are current projects that I am working on daily. I also have multiple extensions installed, and spent quite a bit of time getting all of those programs set up for my preferences and my work flow. I DO NOT WANT to uninstall the entire suite of applications to get Acrobat 9 Pro to install.
    And the conclusion of the "sophisticated" Adobe Support Advisor as to what specifically was the instalation issue?
    Adobe Support Advisor
    The module found no solutions to report for the selected log file.
    If you continue to have difficulties with the application,
    please contact Adobe Support: http://www.adobe.com/support
    System Information :
    Operating System = Windows XP
    Locale = en
    At this point, what I want is to know what registry keys to edit and which folder(s) to delete to eliminate previous traces of Acrobat. In other words, just exactly the tiny piece of the "clean-up utility" that I need to run in order to allow the *Y#^%@#&#(& installation routine to work for Acrobat 9 Pro. I have no intention of uninstalling Dreamweaver CS4, as that is my business livlihood, and I know that my Dreamweaver CS4 client files/sites could not be read by earlier Dreamweaver versions. Asking me to uninstall Dreamweaver, Photoshop, Illustrator, Flash, InDesign, and Fireworks is insane. Your bad installation routine is not my fault, and you cannot expect me spend countless hours getting all those programs set up the way I want and with all my client/work files working correctly and all the extensions set up properly. So, if Adobe software support refuses to tell me what registry keys need to be changed, then I want Adobe Sales to send me a new, standalone version of Acrobat 9 Pro on disk.
    Dennis

    I hit the same problem except I had a Reader X installed not a pro version.  For me the solution was to really make sure that nothing else was running.  I followed the steps from http://support.microsoft.com/kb/2438651#reso2 the link is goofy so here is the pertinent text:
    Programs that are currently running on your computer may be interfering with the installation processDisable programs that might be interfering with the installation process. To do this, follow these steps:
    Click Start
    , type msconfig in the Search box, and then click msconfig.exe.
    If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.
    On the General tab, click Selective startup, and then click to clear the Load startup items check box.
    Click Services, click Hide all Microsoft services, and then click Disable all.
    Click OK, and then click Restart.
    Try running your software program installation.
    When you are finished troubleshooting the problem, restart the computer in Normal Startup mode. To do this, follow these steps:
    Click Start
    , type msconfig in the Search box, and then clickmsconfig.exe.
    If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.
    On the General tab, click Normal startup, click OK, and then click Restart.

  • My iPhone will not synch, why would this be happening?

    My iPhone 4 will not synch, I get an error message that the synch did not start. Any ideas on what is going on?

    Change the store back to Canada
    How to Change Your App Store Account Location | eHow.comlocation

  • My Ipod touch will not synch all songs in my library - on my windows 8 laptop. Doesn't matter if the songs are checked or not - only some songs will synch to the IPOD. I have multiple devices and two accounts.

    My IPOD touch will not synch all songs in my library. Library is on a windows 8 laptop. Checking the songs does not matter. I have multiple devices (ipod, IPhone 4 and 5, IPad 2) and two ITunes accounts.

    All songs play on the laptop windows 8. The second Ipod touch we have - all songs synch to it and play.
    But the first Ipod touch we bought - only half (or so) of the songs synch. So I assume there is an issue with the newer Ipod touch. The songs not synching are songs I added to the library from CD's.

  • IPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones

    Problem: iPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones. Contacts synch fine. Was no problem in the past until...
    Sorry for the length. Trying to give all info I can.
    Summary: Had to get motherboard fixed under factory warranty which included new hard drive, and reinstall everything on an HP DV7 laptop. So this is a clean installation of everything on the laptop (Win7). Configuring iTunes and Outlook 2010 for two iPhone 4S users (myself and wife) was my last step. Re-established each user account to iTunes. Calendar synch problem popped up on one of two iPhones that did not exist before.
    Prior history: all synchs worked great prior to the clean install and I never had a problem.
    Config: Windows 7, two iPhone 4S, Week Calendar apps on both. All software up-to-date on iPhones and Win7 (fanatic about that). Had OL2010 PST datafile backups and simply used them for the OL re-installs. OL2010 makes that easy. Each user has their own Win7 login to keep our stuff separate. Of course, OL has Calendar as part of its install.
    Week Calendar apps on both are configured with same calendars (Calendar, Home, My Birthdays, Work). Verified each iPhone Calendars app, Calendar button: From My PC listing has all these checked: All From My PC, Calendar, Home, My Birthdays, Work; Other: Birthdays.
    Difference: In using iTunes to synch, iTunes said the iPhone account was different from the OL account and asked to merge or replace. Apparently this is normal for iTunes on a new install (since basically it is) synching to prior synched stuff.
    iTunes settings for both: Connect iPhone for each user and checked INFO settings for Contacts and Calendars.I used “selected calendars” and verified. Each user has all four calendars checked.
    NOTE: Prior to each users first synch below, neither user had anything in OL2010 Calendar. Can't blame on recurring events problems in OL. ALL the events are on the iPhones and are being synched TO the PC to populate OL2010 Calendars.
    Additional Note: Contacts was already loaded into OL from my backups so synching has no problem.
    User 1 iPhone: Success 1st try.
    In iTunes, selected “merge info” instead of replace.
    Results: User 1 synched fine from iTunes to OL2010 including the 4 Calendars (Calendar, Home, My Birthdays, Work). 4 calendars showed up. No problems at all. Wonderful! expected behavoir.
    User 2 iPhone: Still failing to synch.
    In iTunes, selected “replace” instead of merge info. Apple’s dialog is incredibly confusing and non-explicit on what copies to what and what it does.
    Results: User 2 synched fine from iTunes to OL2010 for Contacts. DID NOT synch the 4 Calendars (Calendar, Home, My Birthdays, Work). Only calendar that shows up in OL is Calendar and it doesn’t contain any data. iTunes has no errors and the synch status bar indicates everything went fine.
    Tried: I deleted the PST files and copied the backup files back to OL to start over. ITUNES no longer gives me the merge info versus replace option. I’ve synched multiple times but the calendar data will not synch.
    Not Tried: Creating the same remaining named calendars (Home, My Birthdays, Work) in OL and trying again.
    ALL suggestions is greatly appreciated.

    Ok, new info. This gets better and better.
    In OL2010, the Calendar in the navigation pane had no arrow indicating it had subcalendars within it. I right clicked on Calendar and chose New Calendar. It gave me a list of the existing calendars that were missing !!
    When I cancelled, there was an expand arrow next to Calendar in the Navigation pane !!!!!
    Expanding it showed the unchecked missing calendars. I checked them and synched again.
    WRONG THING TO DO! ALL my wife's calendar entries in her iPhone since the laptop went down 3 weeks ago DISAPPEARED. No warnings, nothing at any step of this process. The OL files overwrote the iPhone data.
    I can't find any way to get them back as this **** iStuff relies on iTunes for everything.
    Is there any way to get her files back from before this synch?
    Is there no way to save data files off the iPhone w/o iTunes?
    Why doesn't iTunes let you control the direction of data transfer?
    I now have one very ****** off wife.

  • Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

    Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

    The power button for the Trackpad is on the right hand end of the battery case. Press that button to initiate the pairing process. On the top of the Trackpad just above the power button is a tiny green light (you probably cannot see it unless it is lighted). That light will indicate ehther or not the Trackpad is discoverable. If the Trackpad has discoverable the green light will blink on and off. If it does not pair within 3 minutes you will have to press the power button again to re-initiate the pairing process. Once your Trackpad has paired, you can just leave it on and it will pair automatically when you reboot your Mac.
    If you are having problems pairing, try turning off any other Bluetooth devices within 30 or so feet of your Mac mini. That includes other Computers, iPhones, iPads, etc. that may be in the area. Once your Trackpad has pairedwith your mini, you don't have to be concerned about other Bluetooth devices.
    One other hint, I find that although the Wireless Trackpad does not eat batteries as fast as the Magic Mouse it still uses more than the Wireless Keyboard. It is a good idea to keep a supply of AA batteries around. I have used Apple's Rechargable batteries, but found they did not last that long before needing to be recharged. I have had the best battery life from Duracell Quantum batteries.

  • My iPod will not synch photo now that I have upgraded to iTunes 10

    I recently upgraded to iTunes 10. Ever since, my 80GB iPod classic will no longer synch with my Photo Library. It synches everthing else fine, but it will not synch photos. Does anybody know a fix for this?

    Change your itunes settinng from automatic mange music to manually manage music.
    1. Go to your photo tab in itunes
    2. Tick on sync photo from specified pth from your computer
    3. press the sync button
    have a great day.

  • Windows 7 64 bit will not recognise network adapter!

    Windows 7 64 bit will not recognise network adapter!

    You have an older Mac that has 32-bit EFI
    you need to use Windows 7 32-bit or modify the DVD.
    Select CD-ROM Boot prompt
    Stuck at Select CD-Rom Boot
    Hint: Windows 7 SP1 update will need 8GB free space. Windows takes at least 16-20GB. Add in page file, hibernation (each size of physical RAM). Plus any programs and data you store. Cache and temp files (1-4GB) and you get the idea. you will find you can't even login to the sytem. Seen it happen.
    old wives tale: double your best guess for how much RAM, disk space, whatever, to get a more realistic.
    REMOVE the partition using BCA and create 40GB, being sure to leave 20GB free for Mac OS X volume also.

  • My I pad2 will not synch on my mac. I receive a message that says I have an invalid account name or password. However, I do not have a mobile me account. Help!

    My I pad2 will not synch on my mac. I receive a message that says I have an invalid mobile me account name or password. However, I do not have a mobile me account. Help!

    Are you sure this is what the error message says?
    Your iPad is recognized by iTunes and when selecting sync, does the error message say that your iPad is locked and you must unlock it in order to sync?

  • Suddenly my iPhone4 will not synch with my iMac (OS 10.6.8).  What to do?

    Suddenly my iPhone 4 (ios4.3.4) will not synch with my iMac (OS 10.6.8).  What can be the problem?  The iPhone and the iMac seem to work fine in all other was and the iphone gives off its usual sound when plugged into the computer.

    iPhoto opens but not iTunes and no synching noted either on iMac or iPhone and after a few seconds iPhone screen goes black.  I turned off and restarted.  My wife is having the same problem with a different iPhone model and a Macbook.  The problem seems to have begun for each of us since upgrading to 10.6.8.  There are no error messages for either of us.

  • HT1386 My iTunes will not synch music downloaded from CDs from my laptop to my Iphone

    My iTunes will not synch music downloaded from CDs from my laptop to my Iphone. Help!

    Are you seeing an error message in iTunes when this happens?
    Are you syncing the music manually, automatically or over-the-air?
    To get a better idea of the syncing options take a look at this video and this Apple doc -> iOS: Syncing with iTunes

  • My ipod classic will not synch and im getting a -39 message

    My ipod classic will not synch and im getting a -39 message

    Howdy applebyusmc,
    If you are having an issue with syncing your iPod classic there are a few things I would suggest to correct your issue. See the steps starting here -
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Had to have my hard drive rebuilt in my PC (not Mac). When I reinstalled my music library from iTunes, several of the songs did not download properly - they appear in light colored ink on my library list but the songs will not play and will not synch

    Had to have my hard drive rebuilt in my PC (not a Mac).  When I reinstalled my music library from itunes, some of the songs did not properly download.  They appear in light colored ink, but will not play and will not synch with my iPod.  How can I get all of my songs back?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • WIndows 7 and Server2008 machines will not remember network discovery preferences, requires setting every start up or wake up.

    hello
    I wondered if anybody here could be so kind as to help me solve this situation
    i have two Windows 7 machines and Server2008 machines will not remember network discovery preferences,
    i am running software on the windows server machine that collects data and serves information to two windows 7 machines, and network discovery is required for this purpose
    these machines are configured in a local stand alone network configured as a workgroup the only other items on network are none PC based equipment that the server happily communicates with and reads data from
    once the network discovery is set for the network the system runs as expected but on every start-up (or wake up) the network discovery is lost and need to be re allowed. this is the case in both windows server 20008 r2 and windows 7
    how do i make these preferences permanent. so that it will restart and re establish communication its self without intervention
    am i missing a setting or if not  is there a way i can script the the selection of preference on each start(/wake)up.
    the final user need to be able to turn system on/restart and use it with out having to have any IT/networking knowledge to get system running.
    thank you for taking the time to read my query

    You can use group policy to enable network discovery so that it is always configured
    1. In the Group Policy editor on a Win7 or Windows Server 2008 R2 computer, open the GPO that you want
    to use in the Group Policy Editor.
    2. Expand "Computer Configuration", "Windows Settings", "Security Settings", "Windows Firewall with Advanced
    Security", and then "Windows Firewall with Advanced Security - {policy you have open}".
    3 Right-click "Inbound Rules", and then click "New Rule".
    4 In the Rule Wizard, on the Rule Type page, select"Predefined", and then select Network Discovery from
    the list.  Click Next.
    5 On the Predefined Rules page, ensure that the check box is on each rule that is part of the Network
    Discovery group, and then click Next.
    6 On the Action page, select "Allow the Connection", and then click Finish.

Maybe you are looking for