Location of ABAP codes - customed programs

Dear All,
Would you assist to confirm my understanding that,
any ABAP codings/developments, ABAP programs (customed programs) all store in /usr/sap/trans
and /usr/sap/trans only.
We are a very small SAP shop with just 1 developer and little developement,
so if I need on older version of an abap program,
I can just restore /usr/sap/trans from backup tape. This is DEV box only.
Please help.
Thank you.
Edited by: elizabeth ly on Apr 13, 2011 7:08 PM

Hi John,
There was a problem with our SAP DEV hardware server (Win 2003),
so we bring our SAP DEV system and put it on a VM temporary. During this time, there was 1 brand new customized ABAP program created while on VM.
Now that we finished preparing with the new SAP DEV hardware, we take our DEV off from VM.
But, what we are missing is the 1 brand new customized ABAP program.
I figure if I restored from the /usr/sap/trans, the new codes would be there.
Please confirm my understanding.
Thank you.
Elizabeth

Similar Messages

Enhancement-ABAP Code-Customized Field issue

Hi Experts,
Currently I am working on the BW3.5 version. We are using the standard SRM standard extractor 0BBP_TD_SC_1 and we enhance same extractor(populate the filed through CMOD - ABAP Code) with one customized field also. We are having issue on the customized field data which post from SRM system. I have verified the field value and value is fine in RSA3 in SRM source system. But while posting into the BW(PSA itself), its loading correct & wrong value. When i check the PSA for the particular load, It looks little strange. In the PSA, I can see correct value on my first record of the same SC and then next records has incorrect value of the same SC. Currently I am using the ODS as a data target. So finally i am getting the incorrect value on the customized field.
Ex Scenario:
Ex Customized Field: ZORGID
In SRM source system RSA3 Extractor Checker value:
Shopping Card No: 100
Customized Field: ZORGID=1
Shopping Card No: 200
Customized Field: ZORGID=2
In BW posting-PSA:
Shopping Card No: 100
Customized Field: ZORGID=2
Shopping Card No: 200
Customized Field: ZORGID=2
At the same time, if i do the selective deletion of the particular Shopping Card or group of SC in BW and do the full repair, then it gets a correct ZORGID=1 for the same Shopping Card.
I strongly believe, something wrong in the ABAP code. But when we tried to debug the customized filed value in RSA3. The value is fine. so we unable to trace out the issue. Please help me to fix the code. Thanks in advance.
CMOD ABAP Code:
*Populate approver ID even though it doesn't require approval this is required to make sure BW reports have restrict access to respective Org Unit approvals only
IF l_s_bbp_sc-approver_id IS INITIAL AND l_s_bbp_sc-itm_guid IS NOT INITIAL.
CALL FUNCTION 'Z_BBP_FIRST_APPROVALGET'
EXPORTING
iv_header_guid = l_s_bbp_sc-guid
iv_itm_guid = l_s_bbp_sc-itm_guid
IMPORTING
approver_no = l_s_bbp_sc-approver_id
EXCEPTIONS
no_data = 1
OTHERS = 2
IF sy-subrc 0.
ENDIF.
ENDIF.
To ensure that the Org Unit passed in into the field
l_s_bbp_sc-zzapprov_orgunit belongs to the Actual Level 1
Budget Owner and not any other manager such as Added Approver.
CLEAR : ls_ln_approvers, l_userid, lv_bpartner_guid.
DATA : lv_f_apprv_part TYPE BU_PARTNER.
READ TABLE lt_ln_approvers INTO ls_ln_approvers
WITH KEY INITIAL_INDEX = '0000000001'.
IF sy-subrc EQ 0.
MOVE ls_ln_approvers-approval_agent+2(12) TO l_userid.
CALL FUNCTION 'BP_CENTRALPERSON_GET'
EXPORTING
iv_username = l_userid
IMPORTING
ev_bu_partner_guid = lv_bpartner_guid
EXCEPTIONS
no_central_person = 1
no_business_partner = 2
no_id = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION 'BUPA_NUMBERS_GET'
EXPORTING
iv_partner_guid = lv_bpartner_guid
IMPORTING
ev_partner = lv_f_apprv_part.
ENDIF.
ENDIF.
We get the BP number of the first Budget Owner 1
Here, we superseed the field l_s_bbp_sc-approver_id
whereby it may be wrong due to Added Approver.
IF l_s_bbp_sc-approver_id IS NOT INITIAL.
IF lv_f_apprv_part IS NOT INITIAL.
IF l_s_bbp_sc-itm_guid IS NOT INITIAL.
CALL FUNCTION 'RH_STRUC_GET'
EXPORTING
act_otype = 'BP'
act_objid = lv_f_apprv_part
act_wegid = 'EBP-UP'
act_begda = sy-datum
act_endda = sy-datum
act_tdepth = 4
TABLES
result_tab = lt_result_tab
EXCEPTIONS
no_plvar_found = 1
no_entry_found = 2
OTHERS = 3
IF sy-subrc = 0.
READ TABLE lt_result_tab INTO ls_result_tab WITH KEY
otype = 'O'.
IF sy-subrc EQ 0.
l_s_bbp_sc-zzapprov_orgunit = ls_result_tab-objid.
ELSE.
ENDIF.
ENDIF.
ENDIF.
Thanks,
RR

Hi Experts,
Any suggestions. Thanks.
Thanks,
RR

Urgent How to Code Custom program to get_data and Set_data

Hi,
I am using BADI to enhance the vendor master screen.
The Badi were implemented as per OSS 580266.
Subscreen is appering, new buttion is working fine.
But how to communicate between my custom program's PBO , PAI to Badi's GET_DATA
and SET_DATA.
Is any one got any sample code?
Thanks for the help
Rgd.

Hiii John Wu,
Thanks for your reply,
And i have a little bit confuse. I mean, now my project available in SAP Netweaver Developer Studio. I have 2 DCs the first DC for User Interface and the second for EJB. where do i have implement servlet in each others or i need to create and implement at another DC. How to implement it? sorry for somethings write above so I am a new comer for SAP development.
Thank you!

Can not see ABAP code of programs and FM using SE37, SE38, SE80

Hi, all!
When I try to open ABAP-code using transactions SE37, SE38, SE80, they don't display it. Instead it current mode hangs, but I can open another one.
System ECC 6.0, SAP_ABA package SAPKA70021, GUI Patch 17.
I have 2 laptops, one of them works with these transaction properly, another gives described problem. Other my colleagues don't have such problems.
Can anybody help me to solve this problem?
BR,
Boris

hi friend,
I had the same problem the problem than you, the problem isn´t the gui, the probelm is the msxml parser .
Follow the next sollution and you will solve your problem.
http://scn.sap.com/thread/1853701
My original problem was the "SAP signature theme" was black and with a lot of problems, changing to "Enjoy theme" everything appear works perfecly, but when I tryed to display any source code the screen was thinking without end.
The problem is solved uninstalling any SAP software from your machine also msxml program from SAP and reinstalling first msxml 4.0 and msxml 6.0 after shut down install sap logon behind, when ended everything will work again.
This my actual version and it works.
kind regards,
Miguel Angel Orihuela

ABAP CUSTOM PROGRAMS vs SOX - What is your best approach?

SOX defines you must put in place controls to be sure your users can do only those activities wich are not able to create a risk for your company assets.
You can use GRC AC to get clean and stay clean, but the problem is in your custom developments. Indirectly called transactions are not included in the transaction start check, so I think you must use "authority checks" to validate either stantdard authorization objetcs (sy-tcode, company code...) or custom authorization objects before to call a transacction/BAPI inside a custom program to be sure the user has the right permissions to complete this task.
Should i validate any single authoritation object defined in SU24 for each single transaction called Indirectly?
Any other quick win approach?
thx.

Manuel,
There are various types of controls that could be put in place for accomplishing this. Below are some things you could consider to mitigate this risk as I have done in the past which has been sufficent to auditors.
1) Have a solid review process for Functional Design Specs (FDS) reviews of RICEFW objects being developed into your SAP enviroment and be sure to have the process and review documented. This process will allow you to proactively seek out potential issues before they are coded to senstive areas where the potential risk to financial reporting could arise.
2) Implement coding standards for Security such as use of Program Auth Groups, Table Auth Groups, and implement certian SAP notes to secure S_DEVELOP object properly. Refer to https://websmp110.sap-ag.de/securitynotes for security notes.
3) Have a review/monitoring process in place to review access and authorizations to critical objects and transactions. GRC AC is one way to approach this.
You can use abap program "RSABAPSC : Statistical program analysis to find ABAP language commands" to seek out Authority-Checks in custom development as part of a quality review.
Thanks,
Matt

How to insert abap code in LSMW generated program?

hi,
i m working on LSMW for loading data in SAP
i would like to insert abap code into the generated program....
it's because i have 1 BKPF segment (header data), 2 BSEG segments, but i cannot define rules by customizing for the second BSEG segment(LSMW doesn't permitt).
i already tried to insert code directly into the program, but obviously it disapears at each time i generate the program.
i saw that apparently a code insertion has already be made into this program and the subject of this insertion is to define rules for the second BSEG (exactly what i want to do....) and this modification doesn't disapear at new prog generation.....
Any idea ?

Hi
Why dont you use the FORM provided by LSMW
To use this please do the following
1.Goto option Maintain Field Mapping and Conversion Rules
2.Goto menu EXTRAS->LAYOUT->Form Routines
Here you will now get many options like
Global Data
Begin of Transaction
Begin of Processing
Begin of Record
like wise the End of these also.
Please put a breakpoint and check where you want to insert your code.
Note:
This is only for the Conversion Program and does not affect the main program used to update the Standard Tables
Hi , I was reading your earlier post .. It seems that you have worked on EMIGALL. Consider a similar situation, it is like writing the code in the events till CALL01...
Thanks
DOminic
Message was edited by: Dominic Pappaly

Customizing program in abap

Hai All,
i'm new in abap programming.
Currectly i facing a problem in customizing program which is i need to debug it. can anyone guide me on it? if possible pls give me some useful link in abap.
Thank you so much...............

Hi Jee Jee,
Please reward points if helpful. Good luck and welcome to the world of abap!
Check out the following links for how to debug your program.
This link is a demo on how to debug your program :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cbb7716-0a01-0010-58b1-a2ddd8361ac0
other links on debugging :http://www.sap-img.com/abap/testing-and-debugging-abap-codes-functions.htm
http://www.sap-basis-abap.com/sapab002.htm

Schedule a background job for a program using ABAP code.

Hi,
I have to write a program to schedule a background job for another program.
Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
Need it urgently.
Thanks in advance.
Sandeep.

Hi Sandeep,
Here is the demo program regarding the BDC For the background job.
report zprprbdc1
 no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
***data: begin of itab occurs 0 ,
*** matnr(20) type c,
*** mbrsh(30) type c,
*** mtart(30) type c,
*** kzsel(20) type c,
*** maktx(40) type c,
*** meins(5) type c,
*** end of itab.
data: begin of record occurs 0,
* data element: MATNR
 matnr_001(018),
* data element: MBRSH
 mbrsh_002(001),
* data element: MTART
 mtart_003(004),
* data element: XFELD
 kzsel_01_004(001),
* data element: MAKTX
 maktx_005(040),
* data element: MEINS
 meins_006(003),
* data element: MTPOS_MARA
 mtpos_mara_007(004),
 end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
**do.
**read dataset dataset into record.
**if sy-subrc <> 0. exit. endif.
call function 'GUI_UPLOAD'
exporting
 filename = 'c:\jitu\bdc\10002.txt'
 filetype = 'ASC'
 has_field_separator = 'x'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
tables
 data_tab = record
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at record .
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
 'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'RMMG1-MATNR'
 record-matnr_001.
perform bdc_field using 'RMMG1-MBRSH'
 record-mbrsh_002.
perform bdc_field using 'RMMG1-MTART'
 record-mtart_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
 record-kzsel_01_004.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
 '=BU'.
perform bdc_field using 'MAKT-MAKTX'
 record-maktx_005.
perform bdc_field using 'BDC_CURSOR'
 'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
 record-meins_006.
perform bdc_field using 'MARA-MTPOS_MARA'
 record-mtpos_mara_007.
perform bdc_transaction using 'MM01'.
**enddo.
endloop.
perform close_group.
*perform close_dataset using dataset.
&*****************Reward point if helpful************&

Error in the ABAP Code for Customer Exit Variable

Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
Thanks

Case ZVWKNO.                "write this with out comments
When '1'.              "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.                                    "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas

Help needed in writting Customer exit - ABAP Code

Hi Friends,
I have a scenario in one of the query and need to write a customer exit for the same. Here is the scenario:
I am using one input variable XXX to get input from user which feeds value to one of the charateristic lets say "CHAR1" in query. I have one more characteristic "CHAR2" which has to get the value from the same variable XXX. This is not allowed in BI7.0 as the variable is Hierarchy Node type. It gives error that "Variable XXX is used for two different characteristics."
So i need to create one more vaiable YYY which will get the value from XXX and then YYY will feed value to CHAR2. I would appreciate if some one could tell me step by step how to write customer exit and give me the piece of ABAP code i need to write in my case.
Your help will be appreciated in terms of points.
Thanks,
manmit

Hi Arun,
1. What should CHAR2 take - Hierarchy node variable or something else ?
--> CHAR2 is a simple charateristic
2. In your scenario - why have CHAR1 and CHAR2 ? why not have the user enter values against CHAR2 ??
--> We dont want user to enter two input as the input values for both Chars are same.
3. Did you try using a replacement path variable with the CHAR2 variable taking values from Variable on CHAR1 ?
--> In BI7.0 replacement path variable only take values from Query results. So not able to do the same.
Thanks

ABAP code for custom OLAP variables

Hi experts,
We have a custom variant set as customer exit that I have just added to an infopackge for the data selection of 0FISCYEAR infoobject via 7-OLAP Variant. When I click on the magnifying glass under the "details for Type" column, the "Use Variable of OLAP Processor" window appears showing the OLAP Variable and the fiscal year variant. When you hit F6 (check) it should process the variant and return data for the ranges. With this variant we are using there is not data being returned (using the SAP exit variants data is returned).
I have gone through the forums and have seen people citing the function module EXIT_SAPLRRS0_001 as this is the user exit which houses such abap code. I have seen the variant inside this module and the code itself, but why is it in the infopackage when I click on check (F6) no data is returned? I am getting the feeling this abap code is only executed for reporting. In this case I want the infopackage to select certain data from R/3 (via the use of OLAP variable with custom code) during the load to the ODS.

Hi Mark,
If you created the custom fiscal year variant as a customer exit type, I doubt that it'll work.
Variant is an auxiliary time characteristic. You cannot create it. You can only add new char values:
BW Customizing Implementation Guide (SPRO tcode) -> Business Information Warehouse -> General BW Settings -> Maintain fiscal year variant.
Though, maybe I misunderstood your requirements.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Looking for an ABAP-code for the customer-Exit Variable

Hello,
I have defined a Variable (Interval) which should be processed through Customer-Exit on characteristic Supplier-Date (date format). This Customer-Exit Variable is called ZDATE.
We have another time characteristic Fiscal year / period (0FISCPER) which has single mandatory input variable for ex. 003.2011. This input variable is called ZFISCPER.
Now I have to write an ABAP-Code where the customer exit variable ZDATE is derived (fiscal last year to last period) from input variable ZFISCPER in INCLUDE ZXRSRU01.
Means when the input variable (ZFISCPER) is 003.2011 then the customer exit variable ZDATE should be calculated in INCLUDE ZXRSRU01 as 01.01.2010 u2013 28.02.2011 (fiscal last year to last period).
Since I am quite new in ABAP, I will be grateful if you could write me sample ABAP for this.
Many thanks.

Hi,
should be something like:
DATA: l_s_range TYPE rsr_s_rangesid,
input LIKE sy-datum.
When 'ZDATE'
CONCATENATE '0101' 0FISCPER+3(4)-1 into l_s_range-low. "You get 01012010
CONCATENATE '01' Fiscper+1(6) into input. "You get 01032011
l_s_range-high = input-1. "You get 28022011
APPEND l_s_range TO e_t_range.
Greetings
Roman

ABAP custom program to generate HIPAA 834 file format

Hi Guru's,
I have a requirement to generate the HIPAA 834 file format for all the interfaces ABAP HR programming. Could you please suggest me is there any sample code or program or FM or Class to generate this file format .
It would be veryhelpful to me as am working on the critical requirements.
Thanks in Advance.
Regards,
pj
Moderator Message: MYSELF.
Edited by: kishan P on Dec 10, 2010 4:21 PM

Hi Svetlin,
Thanks for your response, still i am not clear what all customization i need to do, to get the desired file from FDTA tcode.
Any how i have created my own program and linked that program in FBZP tcode.
File is getting created in Application server and able to download it from FDTA tcode.
But the problem is the downloaded file format is not coming in desired fromat.
I created a file like this this i can see it in AL11 tcode.
#1(Record1)
F1(Value1)
F2(value2)
F3(Value32
#2(Record2)
F1(Value1)
F2(value2)
F3(Value3)
When i am downloading from tcode FDTA all the records are getting written in one line.
where as i need it in above specified format.
I am using even page code as 1100.
Any idea is tehre any page code i need to updated other than 1100.
Thanks,
Mahesh.Gattu

Formula Variable with customer Exit (ABAP Code)

Hi Experts,
Please advise me wether i am going in the right way to achieve my requirment else please advise me any alternate approach and update me with the abap code for my customer exit as i am not familiar with ABAP.
My Requirment:
Data :
Emp_ID----Start_Date(DATS)---End_Date(DATS)
I had a user entry (intreval) VARIABLE created on Start_Date
User will enter the date intreval he want to analyze...
Ex: 01.01.2008 to 01.02.2008
Now i want to use the No of Days between user entered date intreval in my calculaction of a keyfigure
In the above example it is 31 days
So i created a Formula Variable of Customer Exit now i need a code that will
pass the user entered dates to
FM: FIMA_DAYS_AND_MONTHS_AND_YEARSImport parameters Value
I_DATE_FROM 01.01.2008
I_DATE_TO 01.02.2008
I_FLG_SEPARATE ' '
Export parameters Value
E_DAYS 31
E_MONTHS 1
E_YEARS 1
and need to pass the E_DAYS (31) to the result of formula
User Entry Variable (Intreval) : ZST_VAR
Formula Variable (Customer Exit) : ZND_EXIT
Code
WHEN 'ZND_EXIT'.
    DATA: low_date2 TYPE d,
    high_date2 TYPE d,
    num_days TYPE N,
    new_low_date2 TYPE d.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO ls_varrange WHERE vnam = 'ZST_VAR'.
        CLEAR l_s_range.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        ls_varrange-low = low_date2.
        ls_varrange-high = high_date2.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
    I_DATE_FROM          = low_date2
    I_DATE_TO            = high_date2
    I_FLG_SEPARATE       = ' '
IMPORTING
    E_DAYS               = NUM_DAYS
l_s_range = NUM_DAYS.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
endif.

Hello,
Before the WHEN statement it shoud have a CASE statement. In the user exit coding place your WHEN statement anywhere between CASE...ENDCASE statement.
your code should look like
DATA: low_date2 TYPE d,
high_date2 TYPE d,
num_days TYPE N,
new_low_date2 TYPE d.
Case i_vnam.
WHEN 'ZND_EXIT'.
IF i_step = 2.
LOOP AT i_t_var_range INTO ls_varrange WHERE vnam = 'ZST_VAR'.
CLEAR l_s_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
low_date2 = ls_varrange-low.
high_date2 = ls_varrange-high.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = low_date2
I_DATE_TO = high_date2
I_FLG_SEPARATE = ' '
IMPORTING
E_DAYS = NUM_DAYS
l_s_range-low = NUM_DAYS.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
endcase.
Thanks
Chandran

SAP Query Custom Field with ABAP Code

Hi All,
I have a custom field in my SAP query which has some ABAP code under it. The code finally writes some value to a variable. My question is do i need to explicitly link the variable in the ABAP code to the custom field OR it's done automatically. For some reason i don't see any value for this custom field. Thanks.

Thanks Sandra

Location of ABAP codes - customed programs

Similar Messages

Maybe you are looking for