Lock records when in Update Mode / problem with 2 users on 1 document

Hi,
when user A updates e.g. a purchase order and user B goes into this purchase order and updates e.g. the remark before user A, then user A cannot save his changes. Imagine user A has put in several new lines and has made several price adjustments, his work will be gone.
In most cases this should not happen very often, but it could. Since B1 recognizes when another user has updated the document before, it should be possible to solve this situation more convenient (either by lock, saving to a new document, comparing to the old version, etc).
Thank you
Sebastian

Hi Sebastian,
Your request is understandable. It may not have big problem to change current process by coding. However to lock records whenever in update mode, that could create too many locks. It is basically not good for performance. The trade off may be allowing save as function. However, this may not be a desirable solution for most end users.
Thanks,
Gordon

Similar Messages

  • Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.

    Automatic page updates causing problems with your screen reader? this kind of message come when i access yahoo mail.yahoo mail page not come properly.i can't chat,compose mail nothing accessing.

    Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

  • Update/Insert Problem with Oracle Warehouse Builder

    Hello,
    i have update/insert problem with owb.
    Situation: I have a source-table called s_account and a target table called w_account_d. In the target table are already data which was filled trough the source table inserts. Now anyone make changes on data on the target table. This changes should now give further on the source table with an update operation. But exactly here is the problem i can´t map back the data to source because that will create a loop.
    My idea was to set a trigger but i can´t find this component in owb or is anywhere hidden?
    Also i have already seen properties as CDC or conditonal loading in the property inspector of the table, but i have no idea how it works.
    Give it other possibilities to modeling this case? or can anyone me explain how i can implement this eventually with CDC?
    I look forward for your replies :)

    Hi
    thanks for your answer. I follow your suggestion and have set the constraints of both tables into the database directly.Nevertheless it doesn´t work to begin. In the next step i found by right click on a table the listpoint "configure" - I goes to "unique key" --> creation method and set here follow options: Constraint State = ENABLE, Constraint Validation = Validate. That error message that appears before by the deployment disappears yet. Now i start the job to test if the insert/update process works right. Finally it seems to work - but not really.
    My Testscenario
    1. Load the data from source table about the staging area to data warehouse table: Check - it works!
    2. Change one data record in source table
    3. Load the source table with changed data record once again to staging area: Check - it works!
    4. Load new staging area table with the changed data record to data warehouse table: Check it works! BUT, BUT i can not recognize if it is insert or update operation, then under the design window by jobs execution windows is reported "rows selected 98", Rows inserted" is empty and "rows updated" is empty. So i think works not correct, then my opinion if it works correct it should show be "rows updated" 1.
    What can yet now still be wrong or forgotten? Any ideas?
    *By the way think not 98 rows there is not important if you make an update or insert which performance. It is an example table the right tables have million of records.*
    I look forward for your answers :)

  • When I updated by iphone with IOS7, my calendar entries did not follow the icloud.  I am only showing pre set calendar entries for the year?

    When I updated by iphone with IOS7, my calendar entries did not follow the icloud.  I am only showing pre set calendar entries for the year and lost all other calendar entrie and it will not take any new entries.  They show up in my outlook, but not on my iphone, which they did before I updated my software to the new i0s7

    Before syncing, select each calendar on your Mac and back it up by going to File>Export>Export.  If anything goes missing, you can use these to restore your calendars.
    Have you tried simply force closing the calendar app on your iPhone?  To do this, double-tap the home button, locate the calendar app, then swipe up on the image above the app icloud to close it and tap the home bottom.  Then test your calendar again.

  • Automatic page updates causing problems with your screen reader

    i want to know whats going on with this Automatic page updates causing problems with your screen reader and yahoo does not work and in order for me to even email you for this question i have to use internet exp I have found this complaint many times in the forum but with no real answer how to fix the dang thing will you please tell us what your doing about this problem and or do we have to go back to using internet exp there are more sights than yahoo that no longer work with mozilla please let us no what is bieng done about this problem if any thing
    == URL of affected sites ==
    http://
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SearchToolbar 1.1; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; eMusic DLM/4; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; InfoPath.3; .NET4.0C; AskTB5.8)

    Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

  • Problem with viewing Adobe PDF documents

    Problem with viewing Adobe PDF documents
    I have a Windows 7 Home Premium Computer
    I have read all the suggestions and I have tried downloading multiple versions of Adobe Reader for Windows 7 and Vista from http://get.adobe.com/reader/otherversions/.
    Prior to downloading each version I would delete the current version using  control panel programs uninstall.
    After each new installation I would shut down the computer and then restart the computer.
    I have tried downloading versions with and without having my antivirus (CA Total Defence) running.
    I am told after download that the version downloaded successfully.
    I have read Acrobat Help http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.
    None of the above has helped.
    The problem is no matter what version of Adobe Reader I download, I cannot seem to open a PDF and read it. Nor will the Reader itself stay open.
    1. If I try opening the reader from the desktop link or from the actual program menu, the reader opens for about 5 seconds and then closes of its own accord. If I try to click on any of the reader menus (eg File, Edit, View, Window, Help, Tools) then a warning bell is sounded and the menu does not open. Shortly thereafter the reader closes.
    2. If I try to open the reader by double clicking on a PDF document then the reader opens but the document is not shown (only the grey PDF reader screen is shown) and then the reader closes after about 5 seconds of its own accord.
    The desktop shortcut shows as the 'red Adobe Reader icon'. But the actual program menu icon shows as a blank folder icon.  All PDF documents show as the PDF Adobe icon.
    I have tested various PDFs and none will open on this computer but they will open on other computers.
    I have created a word document and saved it as a PDF. It looked like it had save correctly (has the appropriate icon) but when I try to open it as per step 2 above then the document is not shown and then the reader closes after about 5 seconds of its own accord.
    Does anyone have any ideas about what is going on and how I can fix this?
    Could you please answer in this forum and email me at [removed]
    I am so puzzled and frustrated.

    Thank you so much this did the trick.
    I spent so many hours on trying to sort this out and your answer was so  simple and clear.
    Regards
    Kazzamday

  • Problem with users disabling ARD client service

    I've got a problem and i'm not quite sure of the work around. I'm a PC guy by nature and can't quite figure this out.
    I'm having a problem with users disabling the ARD service from the sharing menu. Unfortunately users need to have admin privleges to do their work so I can't simply give them a standard account.
    I've hidden the ARD user account i created from the login window through Netinfo, but I need to find a way to stop users from shutting the ard service down.
    They don't seem to understand that the company requires that it be on the computer. Now, I'm the one who is set as the admin for ARD in the building, however we really just use it to rollout drivers, install packages, and its a lifesaver for remotely fixing problems with programs. The company didn't really buy it to spy on the employee's.
    Is there any way to hide the service from an admin level account? Or keep them from shutting it down?
    BTW, this would have to be done on multiple machines running both panther and tiger.
    Any help would be appreciated as I'm not quite sure where to start.

    First, as a matter of policy, let them know this service is active, and needs to remain active. If they disobey this instruction and turn it off, you have a human resources issue, not a technical issue.
    Second, there are very few enterprise users that need admin access to their machines. Oh, they ALL think they do, and there will be howling when non-admin status is first imposed, but we have 350 users in a publishing environment with less that 20 setup as admins. Those users are almost all superusers who assist others in a technical role.
    We have far fewer software problems like this and with ARD, IT can install/ authorize installation of software remotely should a user need that. It simply does not dramatically impact our users to have non-admin access. On the other hand, we recognize that a FEW users will need more access, and grant that on a case-by-case basis.

  • Problem with multiple versions of documents being published with 001, 002, etc.

    I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute  is doing this? Thanks for any help you can give.

    Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

  • I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿c

    I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿can you help me

    Some things to try...
    Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
    It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Problem with user number

    Goodmorning, I have a problem with user number of my smartphone Blackberry Curve 8900: when I call a numer of my adress book, on the right,  appears a user number, that I don't know. Why dont'appears mine? I don't have buy this smartphone personally, but I had it (used) through the smartphone's owner...I think that the user number that appears on my display is his. How I can do to remove it?
    Waiting for an answer, thank you.

    Hello scricciolina90
    Welcome To Support Forums
    On or Curve 8900 from the Home screen > click Options > Click Advanced Settings > SIM Card > Highlight the phone number > Press the Menu key and click Edit SIM Phone Number > Check that field or Enter you Mobile number in that field .
    Good luck.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Authorization problem with VF01 "Create Billing Documents"

    Dear All,
    We face following problem with VF01 "Create Billing Documents".
    Transaction: VF01
    User: Joe
    Authorization of Joe:
         VKORG Sales Organization: A, B (authorization object V_VBRK_VKO)
         FKART Billing Type: 1, 2 (authorization object V_VBRK_FKA)
    The objective for Joe:
       Joe is qualified to create bills in
          sales org A only for billing type 1 and in
          sales org B only for billing type 2.
       Joe should not be able to create bills for
          sales org A with billing type 2 and in
          sales org B with billing type 1.
    How can we solve this problem?
    We already searched for userexits without any success.
    Any help or ideas are very appreciated.
    Regards
    Markus Wilhelm
    Project Manager ERP

    Dear,
    There are standard authority-checks based on Sales organization (authorisation object V_VBRK_VKO) and/or Billing type (V_VBRK_FKA).
    An option would be to create a new billing type, define specific authorisations and use the new billing type for these documents.
    The bad thing is that you would also need a special (new) sales order type, because the billing document type is unique per sales order.
    So maybe it is easier to have a different sales organization.
    Another option would be to create a new authorization object and check it in the billing documents.
    If you wish, you could modify program LV60A005 & LV60A006.
    Then you might check various user/customer exits.
    Some functions to check: EXIT_SAPLV60A_001/002,
    EXIT_SAPLV60B_001 - 008, EXIT_SAPLV60B_010 - 011.
    Regards,
    R.Brahmankar

  • Problem with user-defined functions in XQuery String

    hello
    i've a problem with user-defined functions in XQuery String
    details are here (the code is not Human-readable via forum's embedded editor ?? strange)
    http://docs.google.com/Doc?id=ddqwddsr_21c96d9x
    thanks !!

    See
    michaels>  select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?      
                        return {$inputtype}
                     local:test_function("1","2")' returning content) o from dual
    Error at line 5
    ORA-19114: error during parsing the XQuery expression:
    LPX-00801: XQuery syntax error at '{'
    3                       return {$inputtype}
    -                              ^
    michaels>  select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?      
                        $inputtype
                     local:test_function("1","2")' returning content) o from dual
    O   
    2   
    1 row selected.

  • Problem with user mapping

    Hello,
    We got a problem with user-mapping to a SAP system.
    We create a SAp system, and an alias to this system.
    We add a user mapping for the administrator (user, not group). Check for connector is OK.
    Now, we make the same user-mapping for a group.
    if the user also belongs to the group "administrator" this mapping works, otherwise this fail with a message <b>"com.sapportals.portal.ivs.cg.SystemNotFoundException: Got null system object for alias R3HR".
    </b>After checking, there is no user-mapping for the "administrator" group, nor for the roles that belong to that group, nor for the user.
    So, it seem that the alias is only visible for an admin.
    does any one got an idea ? we are on SP14, Linux.
    regards
    Guillaume PATRY

    HI Guillaume,
    The user mapping is available for both Admin as well as end users.
    Open your system from System Administration>System Configuration>System Landscape.
    In the property editor,in dropdown for property category,
    select the logon method as UID?password and User Mapping type to admin/user.
    Then you can create a Group,map the system alias for this group and add users to this group.
    Also,in the property editor for the system,from dropdown for display,select permissions , and add the group to asssigned permissions as READ ONLY and select the checkbox for ENDUSER.
    Hope,this resolves your problem.
    Regards,
    Siddhartha

  • Problems with user SYS and SYSTEM

    Hi,
    I installed 9i on the Linux Suse 7.2, it's runing OK. But when I try to connect with user SYSTEM or SYS as SYSDBA/SYSOPER I receive message "ORA-01031: Insufficient Privileges".
    Please, what do I get this privileges SYSDBA AND SYSOPER?
    Anyone have any ideas?
    Thanks.

    Check the to see if the user is a member of the dba group.
    The O/S user you are using needs to be a member of the dba group in /etc/group.

  • Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

    I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
    The exact error message is as follows:
    "There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
    Make sure your network settings are correct and your network connection is active, or try again later."
    I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
    Any help you can give me would be appreciated.

    Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

Maybe you are looking for