Locked the total level - Plann Books,

Hi
I´m having the following issue, coud somebody help me, please?
when I locked the total level and changed one of the size classes that contained a zero, the lock was removed and the total value was increased.
I mean I locked in the units at the total level, then I entered some values into another row, expecting for the other size classes to be adjusted.
Instead the total was increased and the another row was decreased, the difference went to an unseen size class.
u2022 This only happens when you are changing a cell that currently contains u20180u2019. If you do the same steps but change a cell that already contains a value, the Total value stays locked and the disaggregation works as expected.
u2022 When you remove the value from the cell that was previously u20180u2019, the lock comes back onto the Total row
u2022 This happens regardless of the number of levels you have drilled into. I have tried with just size class and locked Total level, changed a u20180u2019 value to something else and the lock goes away & the Total value is changed.
I could´nt paste the screenshot here to have the example more clear.
thks

not answewr

Similar Messages

  • How can I see the total number of books (size of library) on iBooks on my iMac and IPad Mini?

    I have installed iBooks on both my iMac (main library) as well as on my iPad Mini Retina. I can't seem to find where to see the total number of books in each library? Can anyone enlighten me please? I can see the covers, lists etc. but nowhere how many books I have total in each library (Total: X number of books stored) or something like that. Can someone point me where this information is viewable?

    Did you have 'find my iPhone' activated on it? Because if you go to iCloud.com you can log in there and you can remotely lock or wipe your device.  From what I hear, the police won't do anything about going and fetching stolen iPads and iPhones, but if you have find my iphone/ipad/ipod/mac turned on then it will give you a map of where it is. 
    Just keep in mind that sometimes iTunes does ask you for your password regardless, and only a few weeks ago apple brought in security questions, so everyone had to fill in security questions for their iTunes account to make it more secure If all else fails, ring Apple cusomer support and they might be able to bar your account or something, however you may have to make a new account (the might be able to set it up so you have all your previous information on a new account)
    Hope this helps!

  • What's Impact of changing the customer Name(along with Bill To and Ship To) at the header level after book

    Dear All,
    Revision: 11.5.10.2
    We have a case where some of the orders we have created have incorrect customer name along with incorrect Bill To Ship To.
    All these orders are booked. And their Line Status is either Awaiting Shipping or Supply Eligible.
    What Impact of changing the customer Name(along with Bill To and Ship To) at the header level.
    Thanks,
    Helen

    Hi Helen-Oracle
    As said above there should not be an impact if the warehouse on the order before and after changing the customer, ship to and bill to remains same.
    Additionally, if the item on-hand qty is sufficient to reserve the item and there is no B2B internal requisition kicked off.
    As long as the above conditions are fine, I don't see any impact of changing the customer, bill to and ship to.
    Also, you can run a complete wing to wing cycle in case you really want to test the behavior of the system in such scenario.
    Please feel free to mark the response as helpful or correct if you think it is helpful and to help people easily find help and answered responses.
    Thanks
    Mirza Tanzeel

  • How to lock the statistics in column level.

    Hi All, i am using 10.2.0.1.0 version of oracle.
    I have gathered freuency histogram manually on one of my column of a table to provide more information to optimizer for better calculation of cardinality.
    Now i have my weekend job runs for gathering stats on schema level with method_opt as 'For all column size repeat'. But i dont want the stats of above column to be overridden by the stats job. I dont want to lock the statistics of whole table, but i just want to lock the column level stats for this table.
    how the above can be achieved?
    Below is the details.
    Code for manual histogram , i have eliminated many buckets purposely, as there are 194 buckets.
    DECLARE
    m_distcnt NUMBER := 916714;       -- num_distinct (As it is there in dba_tab_columns)
    m_density NUMBER := 0.00000109031397771616;  -- density (As it is there in dba_tab_columns)
    m_nullcnt NUMBER := 0;       -- num_nulls (As it is there in dba_tab_columns)
    m_avgclen NUMBER := 8;       -- avg_col_len (As it is there in dba_tab_columns)
    srec      dbms_stats.statrec;
    n_array   dbms_stats.numarray;
    BEGIN
      srec.epc := 3; -- no of end points
      n_array     := dbms_stats.numarray(3870     ,
                                                 3891     ,
                                                 3945     
      srec.bkvals := dbms_stats.numarray(25000     ,
                                                 55000     ,
                                                 100000     ,
      dbms_stats.prepare_column_values(srec, n_array);
      dbms_stats.set_column_stats('Schema1', 'USERS_HIST_TEST', 'COMPANYPK',
      distcnt => m_distcnt,
      density => m_density,
      nullcnt => m_nullcnt,
      srec    => srec,
      avgclen => m_avgclen,
      force => TRUE);
    END;
    -- Weekend job which will override above histogram
    DBMS_STATS.GATHER_SCHEMA_STATS (
        ownname          => 'Schema1',
        estimate_percent => dbms_stats.auto_sample_size,
        block_sample     => FALSE,
        method_opt       => 'FOR ALL COLUMNS SIZE REPEAT',
        DEGREE           => dbms_stats.default_degree,
        granularity      => 'DEFAULT',
        CASCADE          => TRUE,
        options          => 'GATHER STALE'
    Edited by: 930254 on Jul 4, 2012 9:08 AM

    Pl do not post duplicate threads - How to  lock the statistics in column level.

  • Scoping Dimension Members, Incorrect TOTAL Levels

    I have successfully applied security on my analytical workspace using PERMIT_READ and FGAC. The guide that I had followed can be read at the following link:
    http://www.oracle.com/technology/products/bi/olap/olap10g_applying_aw_security.doc
    My problem is that on the TOTAL level on the DIMENSION in which the security/limitiation is applied for a certain USER, it still shows the aggregated TOTALs of all the members, instead of just computing for the TOTALs of the visible members to the current user, regardless of checking or unchecking the presummarizations on the "Summarize To" tab.
    I'm guessing that the solution is the manipulation of the PERMIT_READ program, but I'm new to all of these and have a rather tight schedule.
    I was wondering if anyone might know what to do..
    If the above explanation is not quite clear, please see the following:
    =======================================================
    ] 1) A REGULAR user sees the following:
    ] Member 1 : 200
    ] Member 2 : 500
    ] Member 3 : 300
    ] Member 4 : 700
    ] TOTAL : 1700
    ] 2) A LIMITED user sees the following:
    ] Member 2 : 500
    ] Member 3 : 300
    ] TOTAL : 1700
    See the problem? The limited user should have its TOTALs calculated according to the dimensions that it only sees.

    When you say the following "regardless of checking or unchecking the pre-summarizations on the "Summarize To" tab", does this mean you unchecked the various levels and then completely rebuilt the cube? If not then you will have to completely rebuild the cube you are querying because the summarizations for the cube are stored directly in the AW. Unchecking the levels does not delete the stored data.
    What you need is a cube that has not been summarized across the dimensions where you are applying the PERMIT_READ. It should then work correctly, or at least that is my experience.
    Hope this helps
    Keith

  • Mac Mini - Can I "fix" "lock" the audio output of the mini?

    I wish to "fix" (lock) the volume level coming from the headphone/line output of my Mac Mini (version just before the current)?  Is that possible and if so, how?

    For running XP software, the best bet is using one
    of the available virtual machine apps if the apps are
    not highly graphics oriented.  These apps are basically
    a PC running as an application.  With VMWare Fusion or
    Parallels Desktop for Mac, they even have apps to import
    a physical machine ito a virtual machine.  Check their
    websites for more info.
    You should be able to import your mail and other using
    Apple's  Migration Assistant.
    As for the hard drive and CD player, best bet is to just
    remove them and put them into their own enclosures
    which can be purchased from various sources such as
    Newegg, etc.
    As for floppies, best thing there is to find a cheap USB
    drive, if you can.

  • How to manipulate the total in obiee 11g

    Hello,
    I would like to know if its possible to customize the Grand total in the table.
    I just added the grand total in a table.The table has 7 columns.5 columns the grand total is just a sum so no problem but the 6 and 7 column is % column its like
    grand total of col 6->(grand total of col3-grand total of col4 /grand total of col4 ).
    Is there a way i can do this?
    Thanks

    You can add this formula in column 6 like (col3- col4/sum(col4)) but at the total level you will get the tables first row value. This is the bug in 10g & 11g.

  • Grand total level of the percentage column giving value from the first row of column

    Hi Guys,
    I have a requirement like to show the percentage value which the calculation of two columns , in the grand total level .
    I think it can be achievaable by giving the aggregation rule for that column as Server complex Aggregate .
    eg.
    Fiscal Year  Department  subdepartment   Total cost     Sub Department cost     % cost
    2011           Edu             Books                 500              50                               10
    2011           Edu             Note Book           200            100                                50
    2011           Edu             Furniture             300             30                                 10
    2011            Edu                                      1000           180                              18
    Grand Total
    Ideally it should come like as above ..but the problem with me that ,it showing correct value for  all the rows ,but at the grand total level it's taking the value of % cost from the first row . like below..
    2011           Edu                                   1000                  180                         10
    Grand Total  
    I have calculated the % cost column in the answer itself  as (Sub Department cost /Total Cost )
    where the
    Aggregation rule for the columns given are
    Total Cost - Sum  ,Sub Dep Cost -  Sum, % Cost - Server Complex Aggregate
    So plz suggest me any Idea to achieve this ..Thanks in advance.

    Give the agg. as avg for % field.
    Best of Luck,
    Kashi

  • I want to be able to totally block the FaceTime functionality in my home network.  I would like to do this at the router level.  Does anyone know the hostname or IP address that the FaceTime application uses? Or which port it connects to?

    I want to be able to totally block the FaceTime functionality in my home network so my 4 kids aren't using the Facetime feature- It was easy for Skype just had to enter the work Skype on my Router Security list- and it denies access. I would like to do this at the router level for FaceTime? Only site I find in init.ess.apple.com - is this the startup site for Facetime?   Does anyone know a site I can block, hostname or IP address that the FaceTime application uses? Or which port it connects to?

    I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open.  Good luck!

  • What is the use of Grand total level in obiee ,

    hi ,
    i know that we can perform drill down from one level to another level, level base measures ,aggregate atble.................
    apart from that any other user if so pls give me one small example
    What is the use of Grand total level in obiee

    When you start to use multi-star models and none-conforming dimensions, you will use the grand total level to tell the BI Server what to do with the measures when you try and plot them all in the same answers request.
    Also consider any meaure you want to perform a '% of total' you will need the total mapped somewhere, this could use the Grand total level as a level based measure.
    Regards
    Alastair

  • I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

    I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
    i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

    Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
    It isn't the retail version, because that's 10.6.3.
    Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
    OK the language page.
    From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
    In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
    Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
    Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
    When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
    If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

  • Hello Apple Support,  My iPhone 5 has been stolen and I want to lock the device totally.  My Apple ID is ********** Stolen Device Serial Number: DN*******TWD Stolen Device EMEI: ********.

    Hello Apple Support, 
     My iPhone 5 has been stolen and I want to lock the device totally. 
    My Apple ID is **********Stolen Device Serial Number: DN*******TWD
    Stolen Device EMEI: *********.
    <Edited by Host>

    Sorry if my English isn't correct because of I'm Italian.
    You must switch on the lost mode on the app " Find my iPhone ".
    If you can see it on the map of this app, you will know where is your iPhone in that moment.
    REMEMBER: you can see your iPhone on the map of  " Find my iPhone"  only if it is online. Indeed you can't see your iPhone if it's offlined or switched of.

  • Display the totals only at Material level in ALV

    Hi........,
    I am calculating the subtotals and totals. I am having the columns Company Code , Plant and Material etc.
    First I did sort on table as :
    gr_sorts = gr_table->get_sorts( ).
      gr_sorts->add_sort( columnname = 'C_CODE' subtotal = abap_true ).
      gr_sorts->add_sort( columnname = 'WERKS-WERKS' subtotal = abap_true ).
      gr_sorts->add_sort( columnname = 'MATNR' subtotal = abap_true ).
    After that I am doing the aggregation like this :
    gr_agg = gr_table->get_aggregations( ).
      gr_agg->add_aggregation( 'QUANTITY' ).
      gr_agg->add_aggregation( 'QUANTITY1' ).
      gr_agg->add_aggregation( 'DELTA' ).
    It is displaying the totals and subtotals at each Company code , Plant and Material level.
    But I want to display the totals only at Material level.
    Guide me on the same.
    Reply me as early as possible.
    Thanx,
    Jay
    Edited by: Alvaro Tejada Galindo on Feb 14, 2008 11:08 AM

    Replace your code for sorting
    gr_sorts = gr_table->get_sorts( ).
    gr_sorts->add_sort( columnname = 'C_CODE' subtotal = abap_true ).
    gr_sorts->add_sort( columnname = 'WERKS-WERKS' subtotal = abap_true ).
    gr_sorts->add_sort( columnname = 'MATNR' subtotal = abap_true ).
    with the code given below.
    gr_sorts = gr_table->get_sorts( ).
    gr_sorts->add_sort( columnname = 'C_CODE' subtotal = abap_false ).
    gr_sorts->add_sort( columnname = 'WERKS-WERKS' subtotal = abap_false ).
    gr_sorts->add_sort( columnname = 'MATNR' subtotal = abap_true ).
    Hope this helps. Reward points if helpful.
    Thanks,
    Balaji

  • In an SAP Table is to possible to perfrom lock at the record level?

    Hi All,
      In an SAP Table/Ztable is to possible to perfrom lock at the record level?
    Is it possible to increease the size of the sap table or z-table to insert more records.
    For example I want to insert 50000 records into a z-table and the size category I have given as 0 means which can hold some 15thousand records.
    then what abt the remaining recors?
    how can I inser tthem?
    do I need to increase the manually or it will be done automatically?
    Could any one please explain this?
    Thanks in Advance.
    Regards.
    Abhilash.

    hi,
    u can insert no of  records into table based on ur size category.
    check these.
    0                0   to         1,200
    1            1,200 to         4,900
    2            4,900 to        19,000
    3           19,000 to        78,000
    4           78,000 to       310,000
    5          310,000 to       620,000
    6          620,000 to    25,000,000
    to lock records check this data.
    Lock mode
    Defines how to synchronize table record access by several users.
    The following modes exist:
    Exclusive lock
    The locked data can be read or processed by one user only. A request for another exclusive lock or for a shared lock is rejected.
    Shared lock
    Several users can read the same data at the same time, but as soon as a user edits the data, a second user can no longer access this data. Requests for further shared locks are accepted, even if they are issued by different users, but exclusive locks are rejected.
    Exclusive but not cumulative lock
    Exclusive locks can be requested by the same transaction more than once and handled successively, but an exclusive but not cumulative lock can only be requested once by a given transaction. All other lock requests are rejected.
    reward points if hlpful.

  • Open dataset doesn't lock the file at OS level

    Hi,
    I have a program, which tries to write a file on application server. Once the file is opened, and while program is writing to the file, if somebody goes at application server and deletes the file, I get a short dump, saying the file doesn't exist.
    Why doesn't SAP lock the file at OS level? Why is someone able to delete the file while SAP is processing it? What is to be done to check at OS level, to see if SAP is currently writing?
    Thanks,
    Juwin

    I tried what Kesav and Adrian told. I created 2 programs, 1st to create a file and 2nd to move the file.
    1st program: [url]http://www.mediafire.com/?gmrn1zyd0t0
    2nd program: [url]http://www.mediafire.com/?di2kzzzemkz
    Now, I executed the 1st program. While the 1st program is running, I executed the 2nd program. The Open dataset in the 2nd program always gave me sy-subrc as 0. So, I always got the message as ready to be moved. I tried executing the programs from different SAP user IDs as well. Got the same result. So, it seems, Open dataset, doesn't even lock the file at SAP level. I cannot use Open dataset for output in the second program, because that will erase the contents of the file.
    I cannot change the program, to execute a system command, because the file is created from a standard program, and we dont want to touch it.

Maybe you are looking for