Log files under the admin node are getting filled up

I installed Sun One Web Server 7.o u3 in the following way:
a. Installed admin server on MC1
b. installed admin node on MC2.
c. When I started MC1 and MC2, the access log file (C:\Program Files\Sun\WebServer7\admin-server\logs) under the admin node MC2 is getting filled up with these messages for every 2 minutes:
MC1 IP ADDRESS - CN=admin-client-cert [24/Mar/2010:18:03:46 -0400] "POST /jmxconnector/remotejmx HTTP/1.1" 200 291
I checked for errors file under the admin server, and I did not see any errors, as such. Please help me to fix the problem. I installed node and server, as per guidelines
I have not installed any web app or deployed any config.
Thanks,
Phani

Joe,
That worked. Thanks a lot. 1 more thing. I made a new configuration, while migrating 6.1(SP2) instances.After deploying on MC1/MC2, and when I am trying to start the configuration on the instances, it is giving the following errors for both nodes MC1 & MC2:
ADMIN3584: Error while starting the server. Please check the server logs.
I ran the log mode with 'finest' level and it is showing following exceptions:
25/Mar/2010:17:55:28] fine ( 6044): for host 10.248.131.38 trying to POST /admingui/admingui/startInstances, service-j2ee reports:
com.sun.web.admin.exceptions.AdminException: ADMIN3584: Error while starting the server. Please check the server logs.
     at com.sun.web.admin.mbeans.AgentMBean.startServer(AgentMBean.java:212)
     at com.sun.web.admin.mbeans.AgentMBean.startServer(AgentMBean.java:198)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
[25/Mar/2010:17:55:28] info ( 6044): for host 10.248.131.38 trying to POST /admingui/admingui/startInstances, service-j2ee reports: Exception : ADMIN3011: The operation failed with errors on the following nodes:
Node 'MC1.test.com':
ADMIN3584: Error while starting the server. Please check the server logs.
[25/Mar/2010:17:55:28] fine ( 6044): for host 10.248.131.38 trying to POST /admingui/admingui/startInstances, service-j2ee reports:
com.sun.web.admin.exceptions.MultiNodeException: ADMIN3011: The operation failed with errors on the following nodes:
Node ''MC1'
ADMIN3584: Error while starting the server. Please check the server logs.
     at com.sun.web.admin.mbeans.NodeMBean.doLifecycleAction(NodeMBean.java:84)
     at com.sun.web.admin.mbeans.NodeMBean.startServer(NodeMBean.java:299)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.web.admin.mbeans.BaseAdminMBean.invoke(BaseAdminMBean.java:49)
     at
Any help on this issue is appreciated.
Thanks,
Phani

Similar Messages

PS cc 2104 downloaded but all files under the help tab are inactive

I downloaded CC and then PS and Bridge. The CC pane stated that both were downloaded correctly and I checked that they were 64 bit versions (working with a win 7 64 bit pc).
The programmes appear to be working OK and interacting correctly with my pre-installed LR5.5 but there are Several odd problems:
- none of the active tabs in CC pane (information, tutorials) work
- none of the active options under the PS Help tab work and I get an error message telling me that the Browser was not installed correctly and that I need to reinstall
In contrast, Bridge cc 2014 (installed at the same time) works without problem and the help files are accessible
I have done this reinstallation 3 times, then spent 2 hours "chatting" with Adobe technical support who were able to confirm my problem as described but were unable to resolve it for me
Does anyone have any clues as to what may be going on and how to resolve it - please

Interesting, I just checked Bridge and following the intervention of the Adobe help specialist last night (I gave him remote control of my PC as it was quicker) now I can't access the Help or Adobe Support centre from that either (no error message, just no response)
I wish I knew what the heck was going on!

When trying to log in as the Admin user, get "error on page"

Hi gurus, I am brand new on this new product. Yesterday I just downloaded the latest Apex (2.2) and installed it successfully by following the instuctions (for I got these two lines in the install log: Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_020200 schema.
). I have got two problems. First, when I try to log in as the Admin user, and as soon as I start typing the user name and password on the logon page, I see "error on page" at the very lower left corner of the browser (IE 6). So I can not log in. Second, the Oracle HTTP server takes up almost 100% of my CPU (by itself, the 10g instance does not take up any noticeable CPU if I am not doing anything, but the HTTP server keeps the CPU busy all the time no matter what).
What did I do wrong? Please help me. Thanks a lot.
Ben

Hello user526627 and all,
I also have installed apex 2.2 successfully. At least I've not found any errors and this is the tail of install.log:
Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_020200 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex
timing for: Upgrade
Elapsed: 00:00:00.12
JOB_QUEUE_PROCESSES: 10
Completing registration process.
Validating installation.
timing for: Validate Installation
Elapsed: 00:03:18.10
timing for: Complete Installation
Elapsed: 00:38:11.54
Interesting thing is that I am getting 404 when I use suggested http://host:port/pls/apex/apex_admin or http://host:port/pls/apex (I am using host name of the machine or ip address). However the http://host:port/pls/htmldb/ and http://host:port/pls/htmldb/apex_admin works (at least, I am getting a page without images). In addition, when I provide user name and password on the http://host:port/pls/htmldb/apex_admin page and click on 'Login' nothing happens... :(
This is a clean install. I've also used a HTMLDB 2.0 install from companion cd (Oracle10g R2 for Windows) - this had worked ok, however it did stop working when I istalled apex 2.2 on top of it. I've dropped flow-schemas and tablespaces I've created for apex 2.2 install and started the install over again. However, still no luck. Here is the command I am using to start apex 2.2 installation:
@apexins ********** htmldb_data htmldb_files htmldb_temp /i/ none
I have installed oracle http server in a standalone home, the http server works.
Thank you for your time,
Daniel

I keep getting an error code while trying to import a cd to my itunes: Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space. What does this mean?

I keep getting this error code while trying to import a cd to my itunes: "Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space." What does this mean?

Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
tt2

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

So you have backed up the content of the computer's hard drive, too?
That usually is a great idea since it is possible to lose use of the system
if parts of it have accidentally been removed or get over-written, or the
main system files get corrupted, when the hard disk drive gets too full.
If you have not trashed the originals of your created content, that remain
after you made copies on an external hard drive or other device, then
that is what you'd have to do to reclaim the capacity still in use by them.
What are specifications of the hard disk drive? The unused capacity
verses the used, in GB? If the hard drive has less than 15 to 20%
free or unused capacity, you could run into trouble. Mine are 40-50%
unused hard drive space, so ample room is available for automatic
Virtual Memory to use that capacity as temporary swap file space.
This is helpful when the computer could use more physical RAM
memory capacity, but doesn't have it. Or if the RAM is maxxed out
and you can't add any more. Virtual Memory is part of OS X and the
system automatically can use as much as is available, but it is better
to be sure there is plenty of resources available to include chip RAM
as well as unused or free hard drive capacity for use as VM.
If for some reason your files in Trash won't go away when you empty
it, you may have to restart. Be sure you have not included any System
files in the content in the Trash, or the Mac may not start up later on.
You may have to boot the computer from the install-restore OS X DVD
and run Repair Disk from its version of Disk Utility, to be sure it's OK.
I'm guessing that by now you know enough about the vintage system
in the older hardware to figure it out, so I won't write about it now.
In any event... hopefully you can simply trash the files, but check them
carefully, & you may need to remove (copy to archive first) even more.
Good luck & happy computing!

How do i get to display the nodes under the root node in a JTree?

In my JTree there is a root node.This root node has 4 child nodes.Each child node in turn has nodes under it.What i need to do is just display the child nodes under the root node i.e., the four child nodes and keep these child nodes in a collapsed state.How do i go sbout this?

Please try this:
tree.expandRow(0);
SwingUtilities.invokeLater(new Runnable(){
    public void run(){
        tree.setRootVisible(false);
});If you want to show the RootHandles:
tree.setShowsRootHandles(true);If you want to keep nodes in collapsed state (not expandable):
        tel = new TreeWillExpandListener() {
            public void treeWillExpand(TreeExpansionEvent event) throws ExpandVetoException {
                throw new ExpandVetoException( event, "Don't want" );
            public void treeWillCollapse(TreeExpansionEvent event) throws ExpandVetoException {
        tree.addTreeWillExpandListener(tel);Some reading material:
http://java.sun.com/docs/books/tutorial/uiswing/components/tree.html
http://java.sun.com/docs/books/tutorial/uiswing/events/treewillexpandlistener.html
Edited by: Andre_Uhres on Nov 14, 2007 5:17 PM
Edited by: Andre_Uhres on Nov 14, 2007 5:33 PM
Edited by: Andre_Uhres on Nov 14, 2007 5:39 PM

What are all the files under the backup

I'm looking in the windows backup directory for the iphone and notice many files under the two backup directories with different time stamps and sizes. It seems data is there, but how do I figure out or use a specific file in that directory to recover photos.

The data is stored in a SQLite database/format, which can't be accessed on your computer without an aid.
You can use a 3rd party utility such as this one.
http://msb.macsupport-pr.com/

Web server log files under LabVIEW RT

Hello,
Is there any log files for the web server under LabVIEW RT running on a PXI? The log file checkbox is disable in the target options.
Also, is there a way to find out if the web server is running on the target?
I'm asking the question because I can't access anymore a remote panel (and even the root of the web server) on my PXI. I reinstall everything and I still have the issue. I'm pretty sure that IT changes some network settings but they say no. I need to validate that everything is working on my side before before taking further action.
Thanks,
Patrick

Hi Patrick,
I would suggest having the log file checkbox enabled in the target options. That should show if errors are occurring while it is running. Are you running remote front panels and web services, or just remote front panels?
Can you provide a picture of all the software you have installed on your PXI? You should be able to find this in MAX under the PXI in Remote Systems.
Scott A
SSP Product Manager
National Instruments

Where to keep the log file and the mdf/ndf

Hi ,
While going through the book of Kalen Delaney "inside sql server" I got statement "A general recommendation is to put log files onto their own physical disk. Here I am bit confuse that we have to keep log file in same hard
disk separate derive or in separate hard disk itself. On My DB server has only one hard disk, with three logical partition, so if I keep my log file MDF on different derives will I get the performance.
Thanks in advance for reply........
Regards Vikas Pathak

@sateesh : but as per link "http://msdn.microsoft.com/en-us/library/bb402876.aspx"
This rule checks whether data and log files are placed on separate logical drives. Placing both data and log files on the same device can cause contention for that device and result in poor performance. Placing the files on separate drives allows the I/O activity
to occur at the same time for both the data and log files.
This is probably as this is the best they can do. Checking that the logical drives are actually two different physical disks is little out of scope from what you can do in SQL Server.
It is also worth pointing that the rule specifically refers to spinning disks. SSD disks do not have this problem.
Erland Sommarskog, SQL Server MVP, [email protected]

Can't add any users while logged in as the ADMIN

Back in my post, http://discussions.apple.com/message.jspa?messageID=5314598#5314598 , I was stuck in a broken auto login, unable to get past the solid blue screen. I was able to fix that but now I can not add any new users to the accounts pane. Logged in as the ADMIN, I click on the + and nothing happens. I can not add anymore accounts. What can I do to solve this?

It is probably some residual effect from your single user mode actions detailed in your previous post.
Run *Repair Permissions* from Disk Utility to see if that is the cause.
If that doesn't fix it, try deleting the com.apple.loginwindow.plist from your admin account's Library/Preferences folder.
There is also the same file in
HD/Library/Preferences/com.apple.loginwindow.plist
but I am not sure about the consequences of deleting that, as I've never done it.
Whichever you delete, log out and log back in again to re-create them.

Log files in Visual Admin of SAP Netweaver

Hi Netweaver Experts,
Could any one help me where to find the log files in Visual Administrator of SAP Netweaver. If you could mention the directory where the files are stored, that would be more helpful for me!!!
Thanks in Advance,
Raaj and Suniel

hi,
you can find the log files in the following directory.
<b><drive>:\usr\sap\<SID>\DVEBMGS01\j2ee\admin\log\system</b>
hope this info helps!
with regards,
Raj.
<i>pls, award points</i>

Log file in the deploy service

Hi ,
I am trying to deploy a ear using deploytool.I am getting errors while deploying.I want see the complete log for the errors.
The deployer_log file displays some errors and ....20 more
" For detailed information see the log file of the Deploy Service"
I want to see the detailed information for the log.
Where can i find this log.
Thanks in advance
Raju

Hi Raju,
You can find the deploy service logs together with all other J2EE Engine logs in the defaultTrace.trc files in /usr/sap/<SID>/<INSTANCE>/j2ee/cluster/server<N>/log.
Best regards,
Vladimir

Can FTP-access to field point log file interrupt the running program?

Can FTP-access to field point log file interrupt the running program?
We have a problem where our factory process control program on a Field Pointer suddenly stops the process. We are running the development system on a PC, wich deploys the program on the Field point, with user interface on the PC. Quite often the process stops for no apparent reason. I'm not sure right now if the control program on the Field Point is still running or if it stops. We use FTP from a distant PC (over VPN) directly to the Field Point to check if the process is running, by looking for date and size of log files produced during running process. I've never opened och copied any log file during process run, because this I'm sure this would cause problems for new log entries to be written. But can the mere looking at the log folder via XP-pros ftp-functionality cause the Field Point to have problems writing data to a log file?
I'm not sure how windows XP pro handles "my network places" when it comes to FTP, it look that it keeps some kind of local copy of the folders, or at least the files opened.
Next version of the program will have only basic functionality on the Field Point, leaving logging etc. to another program on the PC, but right now we are stuck with this system.
Ola A

It turned out that the problem lies in the harware of the production machine, it was not a labiew-program problem at all!
Ola

Read the c2 log file of the sql server using java

Hi All,
i want to read the c2 log file using the core java. how is it possible ? if anybody knows about this please give me the sample code to help me.
i am also searching on net but i am not getting any result about this? so please help me to doing this task?
awaited person

Hi All,
i want to read the c2 log file using the core java. how is it possible ? if anybody knows about this please give me the sample code to help me.
i am also searching on net but i am not getting any result about this? so please help me to doing this task?
awaited person

Message in alert log file during the startup of the DB

Hi,
i have two instances, i have the same warning in the alert log file during the startup of the DB:
Oracle instance running on a system with low open file descriptor limit.
Tune your system to increase this limit to avoid severe performance degradation.
The db_files parameter was at 1024 for the two instances, i have set it to 300 for the first instance and 550 for second, the message for the first instance was droped(it's ok), but the message was there in the alert log for the second instance.
The two instance are on the same machine.
The number of the open file limit on the linux machine is equal to 1024.
I have shutdown the first instance (with db_files=300) the problem persits for the second instance (with db_files=550).
My question is how to determinate the right value of db_files parameter to avoid this message.
Regards.
Message was edited by:
learn

Increase the max number of open file on Linux or decrease db_files.
f the OS limit is 1024 db_files would have to be >= 472 for the message to be printed. t is printed if an instance is configured to access more datafiles than the OS-specific limit on the number of files that can be open in a single process. In this case the server will re-cycle the file descriptors.
Vadim Bobrov
Oracle Database Tools
http://www.fourthelephant.com

Log files under the admin node are getting filled up

Similar Messages

Maybe you are looking for