When trying to log in as the Admin user, get "error on page"

Hi gurus, I am brand new on this new product. Yesterday I just downloaded the latest Apex (2.2) and installed it successfully by following the instuctions (for I got these two lines in the install log: Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_020200 schema.
). I have got two problems. First, when I try to log in as the Admin user, and as soon as I start typing the user name and password on the logon page, I see "error on page" at the very lower left corner of the browser (IE 6). So I can not log in. Second, the Oracle HTTP server takes up almost 100% of my CPU (by itself, the 10g instance does not take up any noticeable CPU if I am not doing anything, but the HTTP server keeps the CPU busy all the time no matter what).
What did I do wrong? Please help me. Thanks a lot.
Ben

Hello user526627 and all,
I also have installed apex 2.2 successfully. At least I've not found any errors and this is the tail of install.log:
Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_020200 schema.
The structure of the link to the Application Express administration services is as follows:
http://host:port/pls/apex/apex_admin
The structure of the link to the Application Express development interface is as follows:
http://host:port/pls/apex
timing for: Upgrade
Elapsed: 00:00:00.12
JOB_QUEUE_PROCESSES: 10
Completing registration process.
Validating installation.
timing for: Validate Installation
Elapsed: 00:03:18.10
timing for: Complete Installation
Elapsed: 00:38:11.54
Interesting thing is that I am getting 404 when I use suggested http://host:port/pls/apex/apex_admin or http://host:port/pls/apex (I am using host name of the machine or ip address). However the http://host:port/pls/htmldb/ and http://host:port/pls/htmldb/apex_admin works (at least, I am getting a page without images). In addition, when I provide user name and password on the http://host:port/pls/htmldb/apex_admin page and click on 'Login' nothing happens... :(
This is a clean install. I've also used a HTMLDB 2.0 install from companion cd (Oracle10g R2 for Windows) - this had worked ok, however it did stop working when I istalled apex 2.2 on top of it. I've dropped flow-schemas and tablespaces I've created for apex 2.2 install and started the install over again. However, still no luck. Here is the command I am using to start apex 2.2 installation:
@apexins ********** htmldb_data htmldb_files htmldb_temp /i/ none
I have installed oracle http server in a standalone home, the http server works.
Thank you for your time,
Daniel

Similar Messages

  • When one acco has iTunes open, the other users get error message

    I have Vista Ultimate, 64 bit. My computer has three user accounts. If one user has iTunes open, then, when another user logs on, he gets window after window of "You can't start iTunes because someone else has it open", even though he's not trying to start iTunes!
    The only solution is to log off the first user which is not always desirable if that user is not around. This is happening awhile now. Is there no fix yet???

    I have the same problem described; let me add some information.
    1) I am set up as the "Owner" in Win7. My wife is set up as 2nd account. If I have iTunes open and my wife opens her account nothing happens. However, if my wife has iTunes open and I open my account, Windows gives me that annoying message saying that another user has iTunes open...every 30 seconds.
    2) I searched through the forum and found several others with the same problem:
    http://discussions.apple.com/thread.jspa?threadID=2168866
    http://discussions.apple.com/thread.jspa?messageID=10643226&#10643226
    http://discussions.apple.com/thread.jspa?messageID=10344281&#10344281
    http://discussions.apple.com/thread.jspa?messageID=10511702&#10511702
    Most interesting thing I learned from this is that this error is found on multiple Windows platforms, but everyone is using an HP computer.
    Is there some script that HP runs that is messing with iTunes?

  • Error ORA-12560 prompts when trying to log in to the Enterprise Manager

    Hi all,
    I am a newbie to Oracle.
    Just installed the Oracle 9i Database Enterprise Edition (9.0.1) into Windows Server 2003 Standard Edition. Problem is encountered when trying to log in to the Enterprise Manager Standalone mode using either system/oracle or scott/tiger as credentials. Error "ORA-12560: TNS:protocol adapter error" prompts.
    I tried to check with some configuration and see whether the services are started. Services of "OracleOraHome90TNSListener" and "OracleServiceORCL" have been started and the database exists in the dedicated directory. Environment variables of "ORACLE_HOME" and "ORACLE_SID" have been added manually as the SID is set to orcl, which I just follow what the instruction manual has stated. Moreover, I can't get access using command prompt typing "svrmgrl"; error returned stating " 'svrmgrl' is not recognized as an internal or external command, operable program or batch file."
    Another information is that there is no domain set in my server. Just a server with a name being assigned in a workgroup.
    Hence, would you mind please advice me what to do in order to get access into the Enterprise Manager? It's quite an urgent task.
    A million thx in advance!
    Best Regards,
    Karen

    Hi Jigneshrp,
    Thanks for your reply.
    It is checked that the listener is running and TNS name service exists. Following your advice, I did create a new listener and another name service and use them, but the same error turns out when trying to log in to the Enterprise Manager again.
    Additional information to take note for is that while reconfiguring the existing listener or creating a new listener, a mesage prompts stating "The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as it is, but it will not be possible to start this listener until the conflict is resolved. Would you like to continue with the continue with the configuration anyway? Yes/No".
    As for the reconfiguration or the new creation of TNS names service, when I am trying to test for the connection, the results in the details pane states that "Connecting... ORA-12560: TNS:protocol adapter error. The test did not succeed...."
    Would you mind pls advice me on these?
    Furthermore, there exist 2 questions I am wondering is that it is stated in the instruction manual that prior to the installation, a static IP should be specified for it instead of the DHCP one; hence, I wanna ask after the complete insallation, is it that the server should be running in the network, i.e. allow it to get connected with the outside network?
    2nd question is that can Oracle 9i Database Server Standard Edition (9.0.1) be installed under a Windows Server 2003 Standard Edition and just a Window XP Professional?
    Thanks for your reply.
    Best Regards,
    Karen

  • When trying to log on to the iTunes store I get the message 'We could not complete your iTunes store request. The network connection was reset'.

    When trying to log on to the iTunes store I get the message 'We could not complete your iTunes store request. The network connection was reset'.  I can access my account on a different PC but not my own.  Can you advise me as to what I should do please?

    Hello donnafromwakefield,
    The article linked below details steps that can help restore your computer's ability to connect to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/en-us/TS1368
    Cheers,
    Allen

  • Photoshop elements quit working, I uninstalled it, tried to re-install using the cd, but getting errorPhotoshop elements quit working, I uninstalled it, tried to re-install using the cd, but getting error, any other way to re-install it without the disk ?

    Photoshop elements quit working, I uninstalled it, tried to re-install using the cd, but getting error, any other way to re-install it without the disk ?

    Yes.
    Download Photoshop Elements products | 13, 12, 11, 10
    However, the real issue is why the program is not working. Did you install anything recently?
    When you tried to re-install from the disk, did you shut off the antivirus program temporarily?
    Have you tried a system restore to a point in time when the program was working properly?

  • When trying to sync my ipod 5th generation i get error -69 can this be fixed please

    when trying to sync my ipod 5th generation i get error -69 can this be fixed please and if so could you explain to me how to fix ive restored it and it still does it
    thanks for any help regards charmaine

    This is about the only suggestion I have for you.
    http://support.apple.com/kb/ht1210
    If you do happen to run into a bad file, try converting it to a different format and resyncing the new version over to your iPod.
    B-rock

  • When trying to use YouTube on Apple TV, I get error "No content was found"

    When trying to use YouTube on Apple TV, I get error "No content was found".
    I was able to use the YouTube before on the Apple TV, and suddenly I am getting this error for that last month.
    Please advise.
    Thank you.

    Hello pavelme,
    I'm sorry to hear you are having issues with your Apple TV. If you continue to have issues with YouTube content or playback on your Apple TV, you may find the information and troubleshooting steps outlined in the following articles helpful:
    Apple TV: Basic troubleshooting - Apple Support
    Apple TV: Troubleshooting third-party content providers - Apple Support
    Sincerely,
    - Brenden

  • When trying to update to 11.0.09 i get error 1301, what should I do next?

    when trying to update to 11.0.09 i get error 1301, what should I do next?

    What is your operating system?
    Is there anything else beside the number 1301?

  • When trying to install ios5 on my iphone, I get error message that there is a problem with backup, if I continue with update all data on my phone will deleted. I cancelled the update and phone is fine. Anyone know the cause?

    When trying to install io5 on my iphone4 I get an error message during the updtae that there is a problem with backup and if I continue with the update, all the data will be deleted from my phone. I cancelled the update and my phone is fne. Has anyone else experience this? What is the cause/solution?
    Yhanks!

    DON'T DO IT! Read the threads ... there is a MAJOR problem with updating iPhones 3GS/4 to iOS 5.
    Take it to the Apple store and ask them to do it.
    I repeat: DON'T DO IT YOURSELF.
    (Voice of experience.)

  • When trying to activate my win 8,1 i get error 0xC004C780

    Hello, I am having a bit of trouble with my win 8.
    I have a genuine product key, but for some reason it will not activate.
    Does it take some time to get connected for activation or is it something else?
    The error is 0xC004C780 and i get message that my windows cannot be activated at this time.

    Hello, I am having a bit of trouble with my win 8.
    I have a genuine product key, but for some reason it will not activate.
    Does it take some time to get connected for activation or is it something else?
    The error is 0xC004C780 and i get message that my windows cannot be activated at this time.
    I had several systems that I had this problem with, but no problem on the others I support.  In every case, it was caused by the "Media Center" upgrade being installed.  Apparently, the upgrade process is not expecting the upgrade
    to be installed, so it fails because it doesn't find the file versions it is expecting, or at least, that seems to be consistent with it's behavior.
    Fortunately for me, I also had Windows 8.1 from my "Action Pack" subscription, so I just installed 8.1 over the top of it.  However, once the install and required reboot had been accomplished, I discovered that it was no longer activated.  I tried
    several times to activate the system, but it kept telling me that the "key was invalid for this installation".  I scratched my head for a while and then figured out that the product key changed when I upgrade the original installation of Windows 8 to
    Windows 8.1 Pro with Media Center.
    Thinking quickly, I used a copy of "NirLauncher" (e.g. Nirsoft Utilities from nirsoft.net) and from the "System Utilities", I ran the "Produkey" utility to capture the "Windows 8.1 Pro with Media Center" product key and pasted it into the activation window
    and it worked!
    I hope this helps.
    Steve Wilkins

  • When trying to create an acct. I keep getting error code 403 forbidden

    I am setting up my new 6510-e and when I try to create an account I keep getting an error code 403 forbidden.
    I cannot get far enough to enter my printer code.
    This question was solved.
    View Solution.

    Hi UrGramps,
    I just viewed the website on my computer, and it appears to be working okay on my end. It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
    1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
    2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
    Let me know if you need any further assistance with your issue. Thanks Again!!
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • When trying to enter 3 security answers I keep getting error message about my year of birth

    When trying to buy some music I'm presented with a Security Info screen to select 3 questions and answers. When I finish and press enter, I get an error message "Your year of birth must be between 1880 and 2010" when none of the questions or answers relate to my age or birth. I can't get past this to complete the purchase. Any suggestions?

    All you need to do is restore the iphone in itunes as new
    and then set up as new
    after this is done
    then you can restore from itunes back up with out any error!!
    -Johnny

  • Multi-user system, non-admin-users get "error 46" when downloading quicktim

    Thanks in advance if you have some idea about where the root cause is.
    Error message:
    "Error 46: Could not load or find the QuickTime ActiveX control."
    Context:
    - WinXP SP2 fully patched (as of 06/20/2006)
    - Multiple users: 1-Admin, all others a member of the Users group
    - Simple File Sharing is enabled (this problem does not change when this option is disabled)
    - iTunes 4.9.x and QuickTime 7.1 installed
    - Programs have been uninstalled and reinstalled several times, with no change
    Symptoms:
    - All system users can view quicktime movies when they are embedded in web pages.
    - Administrator can launch quicktime and view *.mov files, all others get Error 46 (see above) when attempting to launch quicktime or double-clicking on .mov files
    - File association properties (under Contorl Panel | Folder Options | File Types) shows .mov opens with QuickTime Player (deselecting this displays WMP as the application)
    - Users Browsing to a directory where .mov files are located, displays the WMP icon instead of quicktime (as under folder options)
    This all used to work. It appears that this became broken in the last month or two, after either patching XP, or installing QuickTime 7.1 to gain H.264 codec functionality.
    Is there a guaranteed way to force system wide file assoc that is reliable?
    Is there a tool that parses the registry and displays what activeX controls are in use for a particular system operation?
    Thank you!
    Windows XP Pro
      Windows XP Pro  

    Fixed this using http://www.sysinternals.com/Utilities/Regmon.html and regedit.exe.
    On my system, found that non-admin users were being denied access to these registry keys:
    HKEYCLASSESROOT\QTOControl.QTControl
    HKEYCLASSESROOT\QTOControl.QTControl.1
    fix (both): add group users: read
    That's because the non-admin accounts are members of the "users" group on my system. You may need to adjust this to match what is on your system.
    Regedit can modify these permissions (but don't do it unless you are confident you can recover if you cause a problem). An easy fix, once the problem is identified. Some of you have already figured this out already.
    Use regmon to get comfortable with how it works, make sure you grok the filtering, it's your friend.
    Modifying the registry at your own risk. Remember to use a registry backup utility! I used http://www.fixregistry.com/download.htm "Registry Healer"
    All non-admin users are operational at this time. I did not have to update iTunes and H.264 content works!
    So it looks like this is a bug in the QuickTime 7.1 installer? Anyone have any insight about why this is happening with some regularity (at least according to the message board posts I'm seeing this month...)
    Maybe the info is some help,
    gwG
    Windows XP Pro

  • When trying to create connection using Contribute 6.5, get error message "Unknown error.  Please see the log for detail."  The log says "Network connection timed out."  What do I do now?

    Have been using Contribute 6.5, and earlier versions, for years with Hostway without any problems.  All of a sudden I cannot create a connection to our website.  Tried to chat with Adobe a twice now and got no help.  Yesterday they started a chat with me, then ended the session without any communication!  My problem has been going on for several weeks now.  I uninstalled Contribute, downloaded and installed again, but it did not help.  Hostway had me connect with Zilla and everything worked fine.  So, they say the problem is with Adobe.    The last attempt ended with "Unknown error. Please see the log for detail."  The log says "Network operation timed out."  Does anyone have any suggestions?

    Hi There,
    Can you please try using any other Internet connection outside your company's network and see if it is working? Alternatively, Can you please try the below settings from the Advanced... Menu while creating the connection using FTP details and try to create the connection again:
    Regards,
    Mayank

  • ITunes crashes when trying to log in to the Store... Help?

    I am using iTunes 11.4 on an iMac (OS X 10.6.8). Until yesterday everything worked fine, but now every time I log in to my account, iTunes freezes and crashes. I didn't do any updates and there doesn't seem to be a problem with the internet connection since it shows me that I have been logged in and I can browse the store while not logged in. My brother can log in to his account without any problem at all using my computer. Help? ):

    Hello user526627 and all,
    I also have installed apex 2.2 successfully. At least I've not found any errors and this is the tail of install.log:
    Thank you for installing Oracle Application Express.
    Oracle Application Express is installed in the FLOWS_020200 schema.
    The structure of the link to the Application Express administration services is as follows:
    http://host:port/pls/apex/apex_admin
    The structure of the link to the Application Express development interface is as follows:
    http://host:port/pls/apex
    timing for: Upgrade
    Elapsed: 00:00:00.12
    JOB_QUEUE_PROCESSES: 10
    Completing registration process.
    Validating installation.
    timing for: Validate Installation
    Elapsed: 00:03:18.10
    timing for: Complete Installation
    Elapsed: 00:38:11.54
    Interesting thing is that I am getting 404 when I use suggested http://host:port/pls/apex/apex_admin or http://host:port/pls/apex (I am using host name of the machine or ip address). However the http://host:port/pls/htmldb/ and http://host:port/pls/htmldb/apex_admin works (at least, I am getting a page without images). In addition, when I provide user name and password on the http://host:port/pls/htmldb/apex_admin page and click on 'Login' nothing happens... :(
    This is a clean install. I've also used a HTMLDB 2.0 install from companion cd (Oracle10g R2 for Windows) - this had worked ok, however it did stop working when I istalled apex 2.2 on top of it. I've dropped flow-schemas and tablespaces I've created for apex 2.2 install and started the install over again. However, still no luck. Here is the command I am using to start apex 2.2 installation:
    @apexins ********** htmldb_data htmldb_files htmldb_temp /i/ none
    I have installed oracle http server in a standalone home, the http server works.
    Thank you for your time,
    Daniel

Maybe you are looking for