LOG US1= Login, Wrong Password

Hi all,
While trying to connect to PI system from ECC system using HTTP RFC SAPISU, I am getting user name password prompt. However, I have already maintained correct user name and password in RFC destination.
I also tried to login with this user name and password in PI system and I could login. Another thing I could observe is whenever I execute test connection for RFC SAPISU, system tries to login to PI system with invalid user name and password. And after 5 attempts user gets locked. Kindly help me resoling this issue.
Thanks and regards,
Meghan

I am getting user name password prompt. However, I have already maintained correct user name and password in RFC destination.
Check user name and password is correct. Also check connection type is maintained as trusted.

Similar Messages

Sapjsf locks ABAP service user psswd: M ***LOG US1= Login, Wrong Password

I have a PI system and a number of ABAP systems connecting to this.
I have defined a service user in PI for each ABAP system - SY_SID_999 (where SID is the SAP System ID and 999 is the client). Various connections (e.g., RFC, ABAP proxy) use these userid and I rely on the user name to identify the source of the activity within PI.
I was forced to change the password of one of these userids and, subsequently, to update connection details in RFCs etc within the source system. All went well for these connections.
Now, however, at 25 minutes past the hour, I get the following error in the PI system's developer trace
M ***LOG US1=> Login, Wrong Password (SY_SID_999 ) [sign.c       4545]
and the SM21 log says
10:25:47 DIA 000 100 SAPJSF                  US 1 User SY_SID_999 locked due to incorrect logon
SU01 change records show no changes to SY_SID_999 from the time I unlock it until 25 minutes past the hour when this error occurs.
The SM19 security audit log in the PI system has errors:
12.08.2009     10:08:18     SAPJSF     localhost          SAPMSSY1     Logon Failed (Reason = 53, Type = U)
Type=U means "user switch (internal call)" according to the documentation.
Reason 53 means "Too many failed password logon attempts"
These errors occur in bunches but without a consistent repetition interval. For example, there were 8 at 10:04:56/57 then 2 at 10:08:18 then a string of success messages as follows:
12.08.2009     10:08:18     SAPJSF     localhost          SAPMSSY1     Logon Successful (Type=U)
Then, at 10:25...
12.08.2009     10:25:47     SAPJSF     localhost          SAPMSSY1     User SY_SID_999 Locked in Client 100 After Erroneous Password Checks
12.08.2009     10:25:47     SAPJSF     localhost          SAPMSSY1     Logon Failed (Reason = 1, Type = U)
If I do not unlock the SY_SID_999 userid in the PI ABAP system, there will be no further errors in SM21 but if I do, at 25 minutes past the hour after the error pattern will repeat.
I have set the rfc/logon_error_log parameter to 3 in PI ABAP to trigger a short dump.
Internal notes from the short dump do not identify the who, what or where of the sign-on attempt...
Internal notes
    The termination was triggered in function "ab_xsignon"
    of the SAP kernel, in line 2725 of the module
     "//bas/710_REL/src/krn/rfc/absignon.c#4".
    The internal operation just processed is "CALY".
    Internal mode was started at 20090812112528.
    Caller system......: " "
    Caller.............: " "
    Caller client......: " "
    RFC user ID........: " "
    RFC client.........: 100
    Login return code..: 20
    Transaction code...: " "
    (Note: In releases < 4.0, no information on the caller is available)
The source system represented by the SY_SID_999 userid is an ABAP ONLY stack so has no sapjsf userid. (For the record, SY_SID_999 doesn't exist in client 999 of SID either - it's defined in the PI system to do work on behalf of SID client 999.)
So the question, after all that, is:
How do I identify the source of this password error?

Thanks Michael
I did get a short dump during the testing process and it indicates that the failed RFC logon attempt originates from within the PI system. My implementation partner was rather careless in the assignment of userids to connections so, while this userid should only be used for connections originating from the SID, I cannot guarantee that.
I've been into both my PI system and the ABAP system (which doesn't have a sapjsf userid so should not be the offending party) and run an SQL select script to find all RFC destinations which contain the string "SID" or "sid" in any of the RFCOPTIONx fields. I've carefully checked out each of these RFC destinations and, in SID they contain the SY_SID_999 userid and, when that's unlocked in PI, the connection and authorisation tests succeed. That rules out upper/lower case issues and pretty much eliminates these legitimate RFC destinations from the suspect list. The RFC destinations identified in the PI system by the SQL search contain "SID" because they name that as their target system; these definitions don't reference the SY_SID_999 userid at all.
All the evidence I can find points very strongly to some process running as SAPJSF in the Java stack of the PI (dual stack) system calling something on the ABAP side and trying to connect as SY_SID_999. Trouble is I can't find it. In fact, I'm don't even know where to start looking to find a job running in the Java stack - on the ABAP side I'd head for SM37 but what to use on the Java side?

Log in issue (Wrong password?)

I'm having an issue login in on iTunes Store.
I have on my network three computers a Mac Pro with Mac OS X Leopard, MacBook with Mac OS X Leopard and a Windows based PC with Windows XP. All of them run iTunes 8.1
The main music library is on the Mac Pro and the other two computers access to the music by the network, to the shared library of the Mac Pro.
Now I want to deauthorize the MacBook to replace the hard drive (not a hard disk drive issue, just I get a bigger one) and reinstall OS X. When I try to deauthorize the MacBook iTunes don't log in, it says that the password I used is wrong. When I try to connect to the store, it sais the same thing. I tried to log in from the Mac Pro, Windows PC and iPhone and it work right, so I guess that issue is on the MacBook, not in the iTunes Store account.
Does anyone know how to solve that?

I just took my new Macbook out of the box today. I went to sign in/authorize it through my existing itunes account. I got the same error messages mentioned by many of you. I then tried to download a song from my Ipod touch to see if the password would be valid there; however, it did not work there either. I followed the instructions for changing the password twice. It still did not work. Here is the weird part -- I logged in successfully from my old Dell laptop. It seems others are having a similar problem, but is there some way to determine if Itunes is the source of the problem? A number to call? I am new to troubleshooting with Mac. Thanks.

Can't login (wrong password), and also can't retrieve password through "Forgot password"

I have the password memorized on my computer. I want to change it but I do not receive the instructions on the e-mail account associated to my Skype account. There is nobody to contact to ask why I am not receiving the e-mail. Anybody knows what could I do?

Hello and welcome to the Skype Community. please contact Skype customer service

I locked myself out of my ipod touch for 60 mins then actually typed the wrong password in again. Now it is telling me to "connect to itunes". I am unsure how to do this. I am unable to use my ipod at all now. Please help.

Hi,
Due to my brother locking me out of my ipod touch I had to wait an hour to log in again. Unfortunately when I did this, I, again put in the wrong password twice more, each time locking me out for a further 60 minutes. On my 3rd attempt to log in the wrong password was entered again. This time though instead of logging me out for another 60mins it now tells me to "connect to itunes" but I have no idea how to do this and I am now unable to use my ipod. Please help.

See Here > http://support.apple.com/kb/HT1212

Log in function locking users that introduce a wrong password many times

I need to create a log in function that validates the username and the password and blocking or locking users that introduce a wrong password many times in a specific period of time. The idea is when it happens, the user has to call the administrator of the system to be unlock.
Thanks for your help.
Edited by: user13486053 on Jan 6, 2011 6:47 AM

If your are using custom authentication,
<li>There is an bultin table which contains the login acess attempts of users: APEX_USER_ACCESS_LOG , You might be interested in the columns APPLICATION,LOGINNAME,ACCESS_DATE,AUTHENTICATION_RESULT_ .
However, inorder to set the authentication_result column(therby identify failed attempts), you would have to call the APEX_UTIL.SET_AUTHENTICATION_RESULT function in your authentication function. Otherwise it would be null both for success and failure cases.
Try this, for finding failure count in last <failure check period>
select count(1)
from APEX_USER_ACCESS_LOG
where application = [APP_ID]
and   login_name = [username] --case sensitive
AND   authentication_result = [failure status]
and   SYSDATE - access_date <= [failure check period]For locking out you would have to flag some column in your custom table and show the user some message in the login page
If you want to use your own table, here's an approach
   Have a table for logging user's login status and time.
   In ur authentication function, you can write to this table everytime a login fails if its succesful u can remove previous 'failure' entries and create a 'success' entry.
   Use count the number of failures within that time period u want say 24 hrs (SELECT count(1) from <table name> where SYSDATE - <DATE column> LESS THAN 1 Day).
    If the count is more than ur required no: flag the users record as locked(have some column updated)
    In your login page, have some conditional region with some text which says the user's account is locked out(the condition can be locked column status of the user who tried to login, use the username page item for identifying the user)Hope it helps

Reset apple id and when i try to login it says wrong password

hi,
I signed out of my iTunes account from my computer and after that when I tried to sign in to my iTunes account on my itouch it says wrong password. So I reset my password and when I try to login to iTunes or app store it says that the password is wrong. How can I fix this? Thanks
And I can't update my iPod or iTunes

Contact itunes support

Unable to login to ePrint Center. It says I'm using the wrong password. When I try to use "Forgot

Unable to login to ePrint Center. It says I'm using the wrong password.
When I try to use "Forgot Password", it rejects my email address. I give up.

The issue you're experiencing is most likely due to an old Snapfish account registered under your email address. ePrintCenter and Snapfish account information is stored in the same place and I've seen this conflict before. You will need to go to http://www.snapfish.com/snapfish/welcome, click the "Sign In" in the top right hand corner of the page and then click the "forgot password" link and enter the email address that is causing your problems, you should receive an email from Snapfish that will let you create a new password there. Once you've created a new password for Snapfish, try to Sign In on ePrintCenter (http://www.eprintcenter.com/) using your email address and the new password you created for Snapfish.
Let me know if you have any further issues. Thanks
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

With login attempt wrong password -- User is not active

All,
During login on portal 6.2 with a wrong password we got a message that the user is not active.
However iplanet-am-user-login-status is definitely "Active".
Any suggestion how we can modify that to get the right notice.
Regards,
Arnout

Do you have the error at the first wrong attempt?
Did you activate "Enable Login Failure Lockout Mode" in the Core Authentication Module?

HT4623 So I upgraded my 4S phone to IOS6, and when I try to log in to Cloud on the phone, it comes back as wrong password. I tried a dozen times, VERY SLOOOOWLY to make sure I wasn't making some sort of typing error, but noo.

So I upgraded my 4S phone to IOS6, and when I try to log in to Cloud on the phone, it comes back as wrong password. I tried a dozen times, VERY SLOOOOWLY to make sure I wasn't making some sort of typing error, but noo.

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Why if my iCloud info is the same as my iTunes login and password does it say the account name or password is incorrect when trying to log in

Why if my icloud info is the same as my itunes login and password does it say the account name or password is incorrect

Oops
Forget that, wrong forum.

Trace IP address / machine of user logging in database with wrong password

Hello All,
I would like to find the IP address or machine information of the user who is attempting to login the database with the wrong password.
I am on 11g. Please can I know if it is possible to get this information and if yes then how to configure it.
Thanks.

1. Enable audit in database with pararameter AUDIT_TRAIL
SQL> show parameter audit_trail;
NAME                                 TYPE        VALUE
audit_trail                          string      DB_EXTENDED2. Enable session auditing
SQL> audit session;
Audit succeeded.3. Check DBA_AUDIT_TRAIL view:
SQL> select os_username, userhost, username, action_name, timestamp, returncode
2 from dba_audit_trail
3 where returncode=1017;
OS_USERNAME
USERHOST
USERNAME                       ACTION_NAME                  TIMESTAMP RETURNCODE
pierre
WORKGROUP\PC-de-pierre
HR                             LOGON                        22-FEB-11       10171017 stands for ORA-1017 Oracle error:
oerr ora 1017
01017, 00000, "invalid username/password; logon denied"
// *Cause:
// *Action:OS_USERNAME is OS account name of user that is trying to connect to Oracle
USERHOST is the machine name where executable has tried to connect.
Edited by: P. Forstmann on 22 févr. 2011 13:39
Edited by: P. Forstmann on 22 févr. 2011 13:41

Can't login, shows wrong password.

hello everyone,
I'm using my skype account many years, and 30 minutes ago my skype closes and i was try to login again, but it shows wrong password, than i was going to reset new password, but mistake.. there was message something about .. i need to contact with skype support... i realy need my skype account back, beacuse i have many business people there and do this without reason i think its not the best skype idea.
What i must do to get back my skype account...?
Thank you!

Greetings,
Password-related matters must be resolved by Skype Customer Service; we here in the Community are not authorized to access Skype accountholder data. Although it may seem silly to do so, if you are locked out of your account, you will need to create a new account in order to contact Skype Customer Service.
Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
You will need to proceed through each step, one at a time. Sign on to the Skype website as requested. Choose the subject and topic which most closely matches the item you need assistance with. Then, continue past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the blue "button" appears at the lower right corner of the website page). You may also skip through Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started. When you complete the webform and click Submit, your information is relayed to Skype and you will receive a reply via e-mail.
If you are a Skype Premium or other eligible customer, you will be routed to start an instant message chat session with a Customer Service agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Xperia Z1, latest Firefox (from play market). ANY site (even gmail) doesn't accept password for log-in (always wrong) on portrait keypad mode.

Xperia Z1, latest Firefox (from play market). ANY site (even gmail) doesn't accept password for log-in (always wrong) on portrait keypad mode. When i switch to landscape mode everything is ok.
At this time Google Chrome doesn't have any problems, password is accepted in portrait mode of keyboard.

Even FF doesn't log in to that site in portrait mode, except Chrome browser.

HT201365 How can i unlock my i cloud lock? i have got password from my seller but it says wrong password. but i can log to i cloud from PC

How can i unlock my i cloud lock? i have got password from my seller but it says wrong password. but i can log to i cloud from PC

If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.
You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.

LOG US1= Login, Wrong Password

Similar Messages

Maybe you are looking for