Logged on user is not provisioned for this application
I created(shared services) the one user in the ldap not in native directory, i given provision in such a application to user ...
i try to login that user but the message was displayed " *Logged on user is not provisioned for this application*"
Pls help me
Thanks
Hi
have you given authority in the application groups for the different profiles for that specific user too?
a common error is giving a user right on the application and omitting to give it in application groups in shared services.
Similar Messages
-
LiveLinkException [HR#10049]: User is not provisioned for this operation
Hi,
I installed EAL 11.1.1.4.000 on win2008 R2 64bit Japanese OS.
But I met an issue after successful added Analytics Link Server node.
When Adding bridge components to an Analytics Link Server, the error message said as:
"Financial Management Server cannot be added: User is not provisioned for this operation"
and the EAL.log shows:
"LiveLinkException [HR#10049]: User is not provisioned for this operation"
Does it means I did the wrong setting when configure EAL?
ThanksHave you set up the correct provisioning for the user in Shared Services?
Cheers
John
http://john-goodwin.blogspot.com/ -
BDT-DC is not prepared for this application object
Hi,
I am getting this the error message:
BDT-DC is not prepared for this application object
when I try to create an extension.
I cam across the following thread:
EEWB
In this thread it is given:
Hi,
The xdcflag in the table TBZ1 needs to be set.
Please follow the steps mentioned below.
1. Start the transaction SM30.
2. Enter the name of the Table/View as V_TBZ1_DC.
3. Press the 'Maintain' button.
4. Double click on the Application Object you are trying to extend(for
e.g., BUPA)
5. Mark the checkbox 'Active in DC' under the section 'BDT DC Settings'.
6. Save the data.
You can refer to note 955236.
When i follow the above steps it says that:
Do not make any changes (SAP entry).
Please Guide.
Regards
ShilpiHi Smita,
I am unable to start the wizard.When i choose Start Wizard I get this error message and the wizard is not started.
Regards
Shilpi -
I have a multifunctional Canon i-SENSYS MF4140 and Mac Book Air Mac OS X10.7.3 Lion (11D50b). I have a problem because I can not scan, it is not driver for this application?
I see printer drivers from Canon for that printer for OS X 10.7. but not scanner drivers. If the MF4140 is not recognized by the Image Capture application and Canon technical support cannot offer any assistance, all I can think of to suggest is to try a third-party scan application such as VueScan:
http://www.hamrick.com/vuescan/vuescan.htm
They offer a free trial period so you can see if it works with your Canon.
Regards. -
The logged in user does not have permissions to perform this operation
OIM 11.1.2.0.4
Connector: Microsoft Active Directory User Management 11.1.1.5.0
Action: revoke a provisioned AD account (logged in user is XELSYSADM member of SYSTEM ADMINISTRATIONS role)
Error message: IAM-2050243 : Orchestration process with id 5756, failed with error message IAM-4065011 : An error occurred in oracle.iam.provisioning.spi.DOBProvisioningMechanism/revoke(Account) while revoking account with id 1 for the user with key 43 and the cause of error is The logged in user does not have permissions to perform this operation..The problem is missing entries into table AAD, Provisioning API uses table AAD to check administrator's scope on the user's organization.
TEST: following SQL statement should return at least a value
select aad_write, aad_delete
from aad aad
, usr usr
where aad.act_key = usr.act_key
and usr.usr_key = <user_key_of_user_you_wanto_to_revoke>
and aad.ugp_key in (
select ugp.ugp_key
from ugp ugp
, usg usg
where ugp.ugp_key = usg.ugp_key
and usg.usr_key = <user_key_of_xelsysadm>
BUG (in my case): if you create an Organization using a OIM user that does not have any Role (except default ALL USERS Role) the system does NOT add right entries into AAD table, so you can revoke account of users that are members of this Organization
WORKAROUND: manually insert entries for all Organizations (ACT_KEYs) for the user XELSYSADM into AAD table
FIX: always create an Organization using a OIM users with at least one Role except ALL USERS role -
'The logged-on user does not have permission to use this object'
Hello everyone,
I am getting the message 'The logged-on user does not have permission to use this object' while saving the Sales Order. I am logging in as a CRM user. There is an addon also running on the server, that saves some data into a user defined table when the Sales Order is saved. Is there any authoisation for users to access user defined tables.
Regards,
Williamhi William,
this is an Authorization issue. provide the user with authorization on your UDT. Definition of user authorization can be found in Administration -- >> System Initialization -->> Authorizations -->> Additional Authorization Creator.... if already defined from here you can fined the additional authorization from the General authorization window.
regards,
Fidel -
ACL is not enabled for this user OSX 10.5
I am running OS X 10.5 on a Mini Mac.
It was a clean install, everything went smoothly except for configuring the mail server.
I created my users as I normally do using Workgroup manager.
However 2 out of 3 of users I created can not log into the IMAP server.
You get the error message ACL is not enabled for this user.
What is the ACL and how do I enable it ?
Thanks
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this userHi there
I had the same problem and I found this post which fixed it:
http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
Hope it works for you too!
Chris -
macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/ -
EXP-00105: parameter CONSISTENT is not supported for this user
Hi,
I have use Oracle 10g on unix platform
i have export is taken from following command
exp \'/ as sysdba\' file=t.dmp full=y buffer=10485760 log=0101.log CONSISTENT=y statistics=none
export is sucessfull but one warning
EXP-00105: parameter CONSISTENT is not supported for this user
if i have use without CONSISTENT parameter then export is successfull ,
why EXP-00105 error occured ?As per Oracle Error Notes:
EXP-00105: parameter string is not supported for this user
Cause: The user attempted to specify either CONSISTENT or OBJECT_CONSISTENT when connected as sysdba.
Action: If a consistent export is needed, then connect as another user.
Looks likE the SYS user cannot do a transaction level consistent read (read-only transaction). You could have performed this by SYSTEM user or any DBA priviliged user to to take the complete export of your DB.
Anyway, for more information the error "EXP-00105", please take a look into the same question on another Oracle related forums.
http://www.freelists.org/archives/oracle-l/05-2006/msg00236.html
Regards,
Sabdar Syed. -
Thousands of "mail is not enabled for this user"
Someone is sending my domain email to thousands of non existent mail accounts. It's like they are combining every possible prefix to my domain they know of. It's been going on for weeks. The Mail service, however, is not being brought down by this at all. So I don't know what kind of attack this is or how to stop it.
Can someone help me? Below is a minute section of my System log:
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
------------------Two possibilities - both fall under the heading 'reconaissance by e-mail'. A spammer or hacker will try 1000's of common names, then look at which ones didn't bounce to determine which ones have accounts on your system.
They then have a comprehensive list of account names on your server, and can proceed to attempt likely passwords for each, or send endless spam to your users. Either one is a Bad Thing, doubly so if you've got any accounts that you created just to test things, and have weak passwords, but you've always counted on nobody knowing they exist.
At one point, I actually had a 'testuser' account that had 'testuser' as the password - I just hadn't remembered to delete it after I was done testing. It's very common for a system to have a couple of these hanging around. I didn't have trouble with it, but looking for and getting rid of these is critical.
Either way, the immdiate solution is to go Server Admin->Mail->Settings->Relay, and add the IP address(es) of the senders to the 'Refuse all messages from these hosts or networks' section. Mail attempts will still show up in your SMTP log, but they'll look like this one I got this morning (one of dozens):
Jan 3 11:07:33 miniserver postfix/smtpd[1440]: NOQUEUE: reject: RCPT from unknown[66.180.115.17]: 554 <unknown[66.180.115.17]>: Client host rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<xptwfs.gov>
Next is to take a look at your password policies - if you've got strong password policies (must include characters and numbers, must be 7 characters or longer, etc., you're probably OK, but if anyone has weak passwords, or god forbid, uses their userid as their password, you're pretty vulnerable.
It's also worth noting that someone with a full list of your users has a fair number of tools for improved odds of phishing, or spear-phishing, where they create finely targeted mails that say things like 'Bob Smith told me to contact you for your password', and look very real. A warning mail to your users to remind them that they need to keep passwords secret, and be cautious about mail, even if it appears to know something about them, would be good. I wouldn't specify that you've been recon'd, just a general 'New Year Security Reminder' or some such.
Hope this helps! -
Somehow my iphoto got canceled? I keep getting this message "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled. How do I fix this?
No - you can not open iPHoto - you need version 9.5.1 - I did not suggest Photo
I suggested
If you are logged in with the Apple ID that was used to purchase iPhoto or to set up the computer if it came preinstalled then quit iPhoto, backup your iPhoto library and drag the iphoto application to the trash (do not empty the trash yet) and then go to the App store and install iPhoto - 9.5.1 in your case
LN -
problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc
"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/ -
itunes has sent a lot of my music into iCloud. I have not asked for this. I can't log on to icloud, since I only have an ipod. How do I get my music back? It seems to have disappeared from my computer.
I have read the the advice you gave, and I had already tried that. It did not help.
When I tried to download an album with nine songs, (I have paid for the complete album), two songs were missing. One of them has showed up/disappeared a couple of times, but with a cloud/arrow-symbol next to it, what I thought to be a symbol for downloading from the cloud. When I click it, it starts a downloading process, and then I am told it cannot be done, "please try again later". The other song is nowhere to be seen. The song with the cloud/arrow-symbol, I bought 3 times, once with the album, twice just the song. That didn't change matters. iTunes tells me I have downoladed all songs I have purchased.
I do not really understand why you do not understand what I am writing, I only describe what happens when I use iTunes.
If a person want to use iCloud, one needs an iPhone, iPad or an iPod Touch. That information is not given until you have downloaded and installed the iCloud program. That is why I have it on my computer, but cannot use it. To set up an iClod account, you have to connect one of the above mentioned devices. I don't have one, so I cannot do it.
If you want the (13013) problem explained, I suggest you google it. I am not the only one to have that problem.
I am thankful that you spend time on trying to help me, but I cannot explain things clearer than this. -
I can't update iMovie, Garage Band, Numbers, Pages, Keynote, and iPhoto. on my new Mac Air. 11". I had hoped when I updated to OS X Yosemite that would solve the problem. It didn't. I get this: This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. I went to the app store, as was suggested in someone else's post, using the only ID I've ever had, and went to the purchases tab, to "accept" the apps. That didn't work, because they weren't there to 'accept'. They did come with my purchase, however. Please advise.
It appears Best Buy is up to their old tricks of palming off returned units as new. Take it back for a complete refund of your money. If they give you any static escalate your problem to management immediately.
-
When trying to perform updates I get this message: This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. What do I do? I just bought the MacBook Pro new and migrated my apps from my old MacBook Pro.
Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept them into your Apple ID, do so.
2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
3. Click here, contact Apple, and wait for a response.
4. Buy them.
(116300)
Maybe you are looking for
-
Can I sync my iPhone and my wife's iPhone calenders through the same iCloud account? Or do I need to set up 2 different apple id's and iCloud's
-
How to working with BI in Visual Composer 7.1
Hi. I want to work with BeX Query using Visual Composer 7.1 I created BI system in EP System configuration. http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm http://help.sap.com/saphelp_nwce10/helpdata/en/4
-
New subscriptions are not available (Germany)
I try to order iTunes Match, but it tells me, that there are no new subscriptions available. I am from germany. Does anyone know what the problems are at the moment and when subscription could be back up? I spended an hour cleaning up my library and
-
hi all anybody explain me about purchase vaku key, what is use and significance. And what are the configuration for the same we have to do in SPRO Thanks sap-mm
-
Is it possible to embed a Flash 8 video into iWeb pages instead of QuickTime? If so, where can I learn? Thanks!