Logger & Player using Button Control

Dear all,
Please tell me how to do logging and playing data in the same VI? The idea is when we click button Logger or Player, only the related area is visible. In each of those areas, there are also button for choosing file path and controlling action.
I have done a little in the attached VI and encountered the problems:
- While running, the buttons always return to False value (not clicking) state immediately after release the mouse.
Can anyone helps me?
Thank you so much.
Attachments:
Logger & Player Button Control.vi ‏167 KB

Hi mipro,
You can modify the mechanical action of a button by right clicking and going to the Mechanical Action menu. Right now you have your buttons set to Latch When Released. This means when you release the button it will switch states, then switch back again. If you want your button to switch states and stay that way, you should use the Switch When Released setting.
This document explains more: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/changemechactofboolswitch/
I hope this helps!
Emily C
Applications Engineer
National Instruments

Similar Messages

Using button control in BEx Analyzer to filter on multiple items

I'm trying to create a button control in BEx Analyzer to duplicate the following command:
DATA_PROVIDER=*&FILTER_IOBJNM_1=<StructureID>&FILTER_IOBJNM_2=<StructureID>&FILTER_IOBJNM_3=<StructureID>&FILTER_VALUE_1=<Item1>&FILTER_VALUE_2=<Item2>&FILTER_VALUE_3=<Item3>&MULTI=X
where <StructureID> is the technical name (the 25-character alphanumberic string) of the structure I want to filter on, and the three items within the structure have technical names <Item1>, <Item2>, and <Item3>. This command works fine on the web, but when I set up a button in BEx Analyzer with the following attributes, it only filters on one item:
Name Index Value
CMD 1 SET_FILTER
DATA_PROVIDER 1 DP_1
FILTER_IOBJNM 1 <StructureID>
FILTER_VALUE 1 <Item1>
CMD 2 SET_FILTER
DATA_PROVIDER 2 DP_1
FILTER_IOBJNM 2 <StructureID>
FILTER_VALUE 2 <Item2>
CMD 3 SET_FILTER
DATA_PROVIDER 3 DP_1
FILTER_IOBJNM 3 <StructureID>
FILTER_VALUE 3 <Item3>
Any ideas?
Thanks,
Jason

Jason,
thank you for the information. This morning I found out myself by checking the 3.5 Web API Reference which basically offers everything I need.
To facilitate data entry you could try using a reference command area somewhere in your excel sheet where you can easily enter the command data and also can make use of copy/paste. I tried this and it works fine - much better than to enter the values in the dialogue.
Best regards
Thomas

How to delete an Item using Button control in InfoPath 2010

Dear Experts
In my SharePoint 2010 List, I have added and using below controls instead of Ribbons
1) Save (button control)
2) Cancel (button control)
3) Delete (button control)
My requirement is when i click on Delete (button control) in edit form then particular item has to be deleted
How to achieve this
Regards
Santosh

Hi Santosh,
Please check this
http://www.bizsupportonline.net/browserforms/delete-sharepoint-list-items-object-model-infopath-browser-form.htm
Please remember to click 'Mark as Answer' on the answer if it helps you

DVD player has two control windows, can't press any buttons.

The internal disk drive on my Late 2009 Mac mini has been non-functional for longer than I've had it. However, I've never really needed it until recently. But when I tried using my new external drive (which runs perfectly and is most certainly not the source of the problem) I encounter one of the strangest glitches I've ever had using Macs!
The DVD player uses the old (brushed metal, 10.6-style) control panel in the bottom-right corner... Until I turn on full-screen. Then the GUI changes to a glazed black appearance (10.7-style) and all of the controls are unresponsive. The features can be triggered by the hotkeys (space bar to play/pause, etc.) but none of the actual buttons can be clicked on. The interface still fades in and out with mouse movement though.
But it starts getting really strange when I exit fullscreen again. Now the brushed metal interface has odd white corners as if the alpha channel is being ignored! https://dl.dropbox.com/u/14403620/brokeninterface.tiff And what's more, though I was unable to reproduce this after a few attempts, once it actually brought the normal control window into fullscreen! There were then two contol interfaces, neither of them could be pressed (though the normal one works outside of fullscreen) and the normal one could still be dragged around the screen yet wouldn't fade away when idle!
Now please note that I am running OS-X 10.7.5 upgraded from 10.6 in the past and the DVD player may not have been original to this computer. I am also using SIMBL and Maximizer and have both Quicktime 7 and Quicktime X installed.
There are thus many things which could be causing the issue, but I have no idea what actually is.
Any insight would be appreciated. I can provide more information if nessesary.

Stan -
Thanks again for the simple but valuable tip.
I'm just going to repeat the relevant sections from my previous post with the screenshots this time:
Below you'll see a snip of how my current folder structure appears. It's identical to yours, except there are no button files in the General Folder. Since you were kind enough to include a file name, I did a search on that specific one and it's nowhere to be found on my hard drive. Hmmm....
I've seen others remark on how... "challenging".... Adobe's instructions can be sometime. I'll admit to having the same feeling when I was trying to download and install all the content files and the 7-zip stuff. Is the answer somehow that I screwed up that? Note the 7-zip folder right above the Adobe folder. Here's a screen shot of that expanded folder contents:
Does that look like you think it should? Have I not installed or extracted something correctly?
Finally, the only other thing I can think of to give you as much info as you might need is to include a screenshot of where the "Functional Content" stuff got saved. Adobe's instructions about this (if I recall correctly) were that it did NOT have to be installed anywhere specific, but you then had to go into Encore (& Premiere) and through preferences point to this stuff, which I believe I did. But I don't see any button type files in these anyway.
Other thoughts or advice?
Thanks!

When playing a home video DVD using DVD Player I tried to use the "Controls, Use current frame as jacket picture" facility to create a printable image but with no success. Can anybody point me in the right direction?

When playing a home video DVD (created on my Panasonic DVD/Hard Disc recorder) using the Mac DVD Player, I tried to use the "Controls, Use current frame as jacket picture" facility to create a printable image but with no success. I assume that any file created by this action would be stored somewhere in a common format but cannot find any such file. Can anybody point me in the right direction?

Hi Sinious,
Interesting to know about 10.8 and Flash. I'll hold off upgrading until they work together. Currently using 10.6.8 at home and same on the Universtity's computers.
Haven't verified on Windows but shall do later in the week if I can get access to a Windows machine.
Both the Flash player and the Projector come up not full screen, and if I leave it that way then things work OK as long as I don't make the video full screen (using the full screen button on the skin).
However if I make the swf or projector full-screen (by using CMD-F or the menu option) then when I click on the menu item to take me to the page with the video on it, instead of a page with a smallish video and back button I get a black screen with no obvious controls. If I then press Escape I get my normal screen back and I am in the page that should have the video but there is not video and the back button does not work. So something wierd is going on here.
If I make a file without any videos with a similar navigation structure everyting works ok except that when I go full screen I lose the finger cursor when I roll over my buttons (which is also wierd).

E71 Music player (next track) control using the No...

I am using tehe Nokia E71 AND EVERYTHING IS SO FAR SO GREAT. The only problem I am experiencing now is that I cannot move to the next track using the button (that is part of the headset). In order to move to the next track, can anybody tell me how to move to the next track without having to remove my phone from the pocket?.
I have used phones e51, 6120 classic and 5300 with the same problem.
Thank you in advance
Message Edited by danmark2000 on 17-Jul-2009 06:54 AM
Solved!
Go to Solution.

Hello Frnds...
Since last 5 months am also facing the problem in E71 Music player (next track) control using the Nokia provided headset........
as you have discussed suggested to install PowerMP3 so i have installed that with version 1.00 which was free available... BUT ITS NOT WORKING... is there any other upgraded version of PowerMP3 available ?
Please guide me more...
THANKS................

Using CheckBox / Radio-Button Control in Dialog Program

Dear Friends,
Please let me know the way to use check-box / radio-button control in dialog programs. Where & how to define them & write the logic.
If possible provide a small example.
Regards,
Alok.

Hi,
goto tcode abapdocu.. abap user dialogs - screens-processing screens you will get examples for all --pushbutt6ons radiobutton checkboxes everything
here is a sample code for you
PROGRAM demo_dynpro_check_radio .
DATA: radio1(1) TYPE c, radio2(1) TYPE c, radio3(1) TYPE c,
 field1(10) TYPE c, field2(10) TYPE c, field3(10) TYPE c,
 box TYPE c.
DATA: ok_code TYPE sy-ucomm,
 save_ok TYPE sy-ucomm.
CALL SCREEN 100.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
 WHEN 'RADIO'.
 IF radio1 = 'X'.
 field1 = 'Selected!'.
 CLEAR: field2, field3.
 ELSEIF radio2 = 'X'.
 field2 = 'Selected!'.
 CLEAR: field1, field3.
 ELSEIF radio3 = 'X'.
 field3 = 'Selected!'.
 CLEAR: field1, field2.
 ENDIF.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
flow logic:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE user_command_0100.
regards,
pankaj singh.

reward if helpful

Reload previous page on back button - using cache control

Hi,
In my application I am using cache control to avoid the pages to be cached. But the requirement is changed and now the previous page can be re-loaded on hittinh browser's back button even after the 10 mins. i.e if user hits the back button with in 10 mins he should be allowed to see the pre-loaded contents on the previous page. After 10 mins the browser should display the page refresh warning.
a) Old code to preventing caching:
response.setHeader("Cache-Control","no-cache"); //HTTP 1.1
response.setHeader("Pragma","no-cache"); //HTTP 1.0
response.setDateHeader ("Expires", -1); //prevents caching at the proxy server
b) I am trying with the code ha changes as to get the previous page with in 10 minutes time:
response.setHeader("Cache-Control","no-cache, max-age=600"); //HTTP 1.1
response.setHeader("Pragma","no-cache"); //HTTP 1.0
The above code changes are not working. If uses "no-cache" with max-arg=600 it behaves like the code in section a).
If I uses response.setHeader("Cache-Control","max-age=600"); then even after 30 mins it load the previous page with preloaded contents.
Any help is appreciated.

I tried it lots of time by refreshing the browser's cache. I am using IE 6.0. I tested it through FireFox to get the header details. when I submit the request it displays the headers request
same as I set in the code. But when I hit the back button (after the max age time passed) still it gets the value from cache and no header values are displayed.

Content Player navigation buttons not working for everyone

Hi,
Some of the participants are experiencing the issue with Content Player navigation buttons 'Continue' , 'End Test' etc..
We suspect it is because of the version of Java runtime environment on thier PC after eliminating the browser cache, or IE version issues.
Could anyone please tell me what are the supported Java versions for proper functioning of LSO600 Content player?
We are on ECC 6.0, LSO600 and SAP portal version EP7.
Any help is highly appreciated.
Thanks,
Jaya

Hello Jaya,
java supported version is more than JRE 1.4.2._07
and IE is IE6 and IE7
LSO supports Java 1.4.02_07 to java 1.6
Browsers:
Micorsoft IE6 and IE7.
Firefox from 2.2
If there is more than one Java version on the pc, try forcing the browser to use a certain version of Java by going to the control panel -> Java -> in java control panel go to -> java tab -> Click view in Java Applet run time settings -> Select one of the JRE to enable it and force the browser to use this version of Java.
Regards,
Manny

Unable to print crystal report over web using ActiveX Control

Post Author: jimmyp
CA Forum: General
We have a problem with printing crystal report over web using ActiveX Control. When clicking print button, it only shows a blank dialog web crystal viewer page without any error. The page just simply hangs. We installed the PrintControl DLL and enable all the security setting for ActiveX Control for IE. It still does not print. Does anyone know why?
Environment.
Bundle Crystal Report v10
Asp.net 2.0
IE 6.0 or higher.
Appreciate for your help.
Jimmy

Post Author: Ian Kulmatycki
CA Forum: General
A team member here found this, I haven't read it, I'm not sure if our problems are related to this, but hopefully it helps someone:
-ian
When Secure Sockets Layer (SSL) is enabled, using the ActiveX control to print reports from a Crystal 10 DHTML viewer results in the following error message:
"A communication error occurred, printing will be stopped."
How can this error message be resolved?
Resolution
This is a known issue with Crystal Reports 10 and Crystal Enterprise 10 viewers and has been tracked. The Track ID is ADAPT00282199.
This error occurs due to the receiving application performing a case-sensitive check for the HTTPS request header value "ON". When a sender application sends the value as "on" in lower case, the error occurs. The update below changes the receiving application to be case-insensitive.
Hot Fixes or Service Packs address this issue as indicated below. With the updates, this issue is resolved.
Unless indicated otherwise, Weekly Hot Fix updates from our FTP site have only been tested with English versions of products.
For Crystal Reports 10 and Crystal Enterprise 10, the update for this issue is included in the Crystal 10 Viewers Weekly Hot Fix (WHF). This is available in English only at the following location:
ftp://ftp.crystaldecisions.com/outgoing/EHF/viewers10win_en.zip
This issue is addressed in the following components (and later versions):
PageObjectModel.dll, version 10.0.5.785, dated 8/25/2004
ReportRenderer.dll, version 10.0.5.785, dated 8/25/2004
WebReporting.dll, version 10.0.5.785, dated 8/25/2004

How can I use table control to enter data

Hi all,
I want to use table control to enter data, instead of using textboxes.
So that the user can enter many data at once and just click the save button at the end of the work, only one click.
How can I use the table control at this context?
Thanks.
Deniz.

Hi deniz,
go through it:
/people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
Regards,

How do I disable one item in a radio buttons control at run time

I need to disable one item in a radio buttons control. At design time
this is possible, but how do I do this at run time? Is this possible? I
cannot find a property per item

Use the property "Controls[ ]" - this gives you an array with references of each single button in the radio buttons control. These you can access with property nodes too.
Hope this helps.
Using LV8.0
Don't be afraid to rate a good answer...

Dynamic Creation of Objects using Tree Control

I am able to Create Dynamic Objets using List control in
flex,but not able to create objects using TreeControl,currently iam
using switch case to do that iam embedding source code please help
me how to do that
<?xml version="1.0" encoding="utf-8"?>

<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:XML id="treeDP">
<node label="Controls">
<node label="Button"/>
<node label="ComboBox"/>
<node label="ColorPicker"/>
<node label="Hslider"/>
<node label="Vslider"/>
<node label="Checkbox"/>
</node>
</mx:XML>
<mx:Script>
<![CDATA[
import mx.core.UIComponentGlobals;
import mx.containers.HBox;
import mx.controls.*;
import mx.controls.VSlider;
import mx.controls.Button;
import mx.controls.Alert;
import mx.core.UIComponent;
import mx.controls.Image;
import mx.managers.DragManager;
import mx.events.DragEvent;
import mx.controls.Tree;
import mx.core.DragSource
import mx.core.IFlexDisplayObject;
/*This function accepts the item as on when it is dragged
from tree Component */
private function ondragEnter(event:DragEvent) : void
if (event.dragSource.hasFormat("treeItems"))
DragManager.acceptDragDrop(Canvas(event.currentTarget));
DragManager.showFeedback(DragManager.COPY);
return;
else{
DragManager.acceptDragDrop(Canvas(event.currentTarget));
return;
/*This Function creates objects as the items are Dragged
from the TreeComponent
And Creates Objects as and When They Are Dropped on the
Container */
private function ondragDrop(event:DragEvent) : void
if (event.dragSource.hasFormat("treeItems"))
var items:Array =event.dragSource.dataForFormat("treeItems")
as Array;
for (var i:int = items.length - 1; i >= 0; i--)
switch(items
[email protected]())
case "Button":
var b:Button=new Button();
b.x = event.localX;
b.y = event.localY;
b.addEventListener(MouseEvent.MOUSE_MOVE,mouseMoveHandler);
myCanvas.addChild(b);
break;
case "ComboBox":
var cb:ComboBox=new ComboBox();
myCanvas.addChild(cb);
cb.x = event.localX;
cb.y = event.localY;
cb.addEventListener(MouseEvent.MOUSE_MOVE,mouseMoveHandler);
break;
case "ColorPicker":
var cp:ColorPicker=new ColorPicker();
myCanvas.addChild(cp);
cp.x = event.localX;
cp.y = event.localY;
cp.addEventListener(MouseEvent.MOUSE_MOVE,mouseMoveHandler);
break;
case "Vslider":
var vs:VSlider=new VSlider();
myCanvas.addChild(vs);
vs.x = event.localX;
vs.y = event.localY;
vs.addEventListener(MouseEvent.MOUSE_MOVE,mouseMoveHandler);
break;
case "Hslider":
var hs:HSlider=new HSlider();
myCanvas.addChild(hs);
hs.x = event.localX;
hs.y = event.localY;
hs.addEventListener(MouseEvent.MOUSE_MOVE,mouseMoveHandler);
break;
case "Checkbox":
var check:CheckBox=new CheckBox();
myCanvas.addChild(check);
check.x = event.localX;
check.y = event.localY;
check.addEventListener(MouseEvent.MOUSE_MOVE,mouseMoveHandler);
break;
else {
var Component:UIComponent =
event.dragSource.dataForFormat("items") as UIComponent ;
Component.x = event.localX;
Component.y = event.localY;
Component.addEventListener(MouseEvent.MOUSE_MOVE,mouseMoveHandler);
myCanvas.addChild(Component);
/*How to move the Objects within the Container */
public function mouseMoveHandler(event:MouseEvent):void{
var
dragInitiator:UIComponent=UIComponent(event.currentTarget);
var ds:DragSource = new DragSource();
ds.addData(dragInitiator,"items")
DragManager.doDrag(dragInitiator, ds, event);
]]>
</mx:Script>
<mx:Tree dataProvider="{treeDP}" labelField="@label"
dragEnabled="true" width="313" left="0" bottom="-193" top="0"/>
<mx:Canvas id="myCanvas" dragEnter="ondragEnter(event)"
dragDrop="ondragDrop(event)" backgroundColor="#DDDDDD"
borderStyle="solid" left="321" right="-452" top="0"
bottom="-194"/>
</mx:Application>
iwant to optimize the code in the place of switch case
TextText

Assuming your objects are known and what you need are simply
variable names created by the program, try using objects as
associative arrays:
var asArray:Object = new Object();
for (var n:int = 0; n < 10; n++) {
asArray["obj" + n] = new WHAT_EVER();

Indesign cs6 menu and tool bar disappear between windows using mission control in mountain lion

heres 2 screen grabs before and after. while navigating between 'spaces' using mission control in mountain lion. issue - the menu and tools bars disappear - not all of them just parts of them. to get back i hit 'tab' button twice which hides and shows tools. very annoying - does anyone know of a fix or is this another bug which i have to live with. im using a macpro june 2012/running 10.8.4 and 2 screens - left for artboard - right for all tool windows.

thanks steve - yes that works as does using the tab key - all well....until i move to another 'space' and then come back again.
for example: my setup is like this - no2 space has indesign project. no3 space has photoshop. so im working on a page within indesign and i need to edit an image- i double click the pic and it opens in photoshop on the other 'space' save the file and go back to indesign to update pic and find menu/tools all over the place - so hit tab twice back to normal - until i 'move' out of that space into another - photoshop/ mail/ whatever - as i toggle between spaces the indesign menu will always be 'corrupt' for a better word. hope that makes sense.

IPod is using voice over and won't scroll. What setting did my child click? It will allow me to use voice control, but i need to know what's wrong first so I can give the correct command.

My daughter's iPod is using voice over and won't scroll. What setting did my child click? It will allow me to use voice control, but i need to know what's wrong first so I can give the correct command.

VoiceOver is an Accessibility feature while Voice Control allows you to control the Music app via voice.
To turn off VoiceOver triple click the Home button and go to Settings>General>Accessibility and turn it off. Use three fingers to scroll if necessary.
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
iOS: Getting started with VoiceOver for accessibility

Logger & Player using Button Control

Similar Messages

Maybe you are looking for