Logging in to the Community Erases My Questions I already Wrote.

Pages like this http://support.apple.com/kb/HT6207 encourage us to write a question and start a discussion about the post.
So, I write it up and hit "Submit"
Then, I'm asked to log in to the community.
As soon as I log in, what I write gets lost for ever.
I hope it's taken care of it asap.

And that is not how the page interface is designed. Please look at the link after logging out and try it for yourself. It's very very basic expectation for the site to retain the input information through the log-in processs. (Imagin an online order process.)

Similar Messages

WebClient Error - Failed to log on to the comm. mgmt. software

Hi, following the CR410 i have created a webclient profile/ framework, and assigned the profile to an org unit.
now when try to open the webclient using crm_ic, i am getting the above error on the IDES system.
"Failed to log on to the communication management software system"
Details of the above error
Diagnosis
An error occurred while logging in to the communication management software system.
System Response
The multichannel services are not available. You will not be able to work with contacts such as phone calls, e-mails, or chat sessions.
Procedure
Contact your system administrator.
Procedure for System Administration
Review the ICI trace.
what could be error...
Thanks,

Have you configured CTI with IC WebClient? If yes under IC WebCLient profile look for CONTACTCENTER function profile and enter correct profile.
If you do not have CTI in place make sure that CONTACTCENTER entry is blank under IC WebClient profile.
Thanks,
Thirumala.

Can I sync my iPhone to a new PC with fresh install of iTunes without erasing my phone. (sorry for the typo in original question)

Can I sync my iPhone to a new PC with fresh install of iTunes without erasing my phone. (sorry for the typo in original question)

Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Question when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

Question
when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

See this. 
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

After posting a question on the community forum page, will I be notified when an answer appears?

After posting a question on the community forum page, will I be notified when an answer appears?

Yes, it will be in your mailbox unless you setup not to receive.

I have a question for the Adobe customer service dept., not for the "community" as a whole!

I have a question for the Adobe Customer Serice Dept., not the "community" as a whole. And I expect an answer! I want to know why I am expected to sign up for another service package when I just paid $25+ yesterday to be able to convert files back and forth from a PDF to a Word file and then back to a PDF. What kind of rip-off is this?

Hi,
I am very sorry that you had unpleasant experiences with our customer service.
If you would like to export your PDF files to MS Word files then ExportPDF tool will do the job.
If you would like to convert MS Word files to PDF then ConvertPDF tool will the the job.
If you would like to export your PDF files to Word file then convert the Word files back to PDF then PDF Pack service is required which includes ExportPDF/Convert to PDF/Combine Files tools.
Please let me know if you have any questions/issues.
Thank you.
Hisami

HT1848 How to transfer Ipad music NOT purchased from Apple to Macbook Air. Answers found in the Community does not seem to deal with the questions some members already ask.

how to transfer Ipad music NOT purchased from Apple to MacBook Air. Answers found in the Community does not seem to deal with similar questions posted to the Community.

You can only transfer purchases from iTunes on the iPad into iTunes on your computer. If you bought the music from another source, you need to use the source app to transfer the music, or you need a third party app to transfer the music.
http://www.wideanglesoftware.com/touchcopy/

I can not log in to the account from the iTunes Store's why I lost my security question! I want to modify the security question again I can not

I can not log in to the account from the iTunes Store's why I lost my security question! I want to modify the security question again I can not

BLANK Cloud Screen http://forums.adobe.com/message/5484303
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Since the Adobe "Chat" system is not very responsive they suggest I ask the community my question. Did they jump you monthly fee $10 without explanation? Check your credit card.

Since the Adobe "Chat" system is not very responsive they suggest I ask the community my question. Did they jump you monthly fee $10 without explanation? Check your credit card.
Perhaps they will answer now?

I remember when Adobe Customer Support existed. Weren't those the good ole days. Now they've pawned us off on one another. Apparently this is what we can expect from Adobe from this point forward.

All questions on the community seem to go to my junk mailbox. How do I stop all thus, please

All questions on the community now seem to be copied to my junk mailbox! How do I stop this happening?

Click here for the instructions on stopping the emails.
(97338)

I found the answer to a question and I want to post it, but I don't have a log in

I just want to post the answer to a question about addons/plugins and I needed to make an account to do so. Apparently the only way I could do this was to make a question.

No, there was no need to ask a question to sign up. Conversely, it's also not necessary to sign up to ask a question ^_^ Here are two ways to register for an account:
# On [https://support.mozilla.org the main page], click the "Get Involved - Help Other Users" button at the bottom.
# On the next page, click the "Sign me up" button.
# Click the [https://support.mozilla.org/en-US/users/auth "Sign In"] link at the top of any question page.
# On the next page, click the "See what you can do to help" button.
# On the next page, click the "Sign me up" button.

"Unable to log in to the user account"

I'm having a problem I'm hoping one of you may have come up against and
solved. We have two Mac OSX.4 servers - one a login server, the other
contains the student Homes folders. Now when a student who has an account
from last year logs in, a message says "You are unable to log in to the user
account "username" at this time. Logging in to the account failed because an
error occurred. The home folder for the user account is located on an AFP or
SMB server. Contact your system administrator for help."
It seems there is a problem with the hand off from the login server to the
data server. I can connect to the data server through Connect to Server
while logged on as admin, so the server is accessible on line. I double-checked the Sharing info of the shared points and they are set correctly. Also, when I run Server Monitor, the stats summary for both servers says "waiting for response."
Any ideas? Thanks!

Mike
Server Monitor is an application that monitors XServe hardware providing feedback for the administrator. It has nothing to do with the Server Operating System. If your trying to use it on anything other than an XServe all you'll see is "Waiting for Response" all day long.
If your hardware is an XServe then you need to use either localhost or the server's loopback address (127.0.0.1) in the name field followed by the default admin's account's password.
+"The home folder for the user account is located on an AFP or+
+SMB server. Contact your system administrator for help"+
This error is usually down to (but not always) a DNS/DHCP issue or some other obscure network related issue affecting DNS. What does the logs say server and client side when the log-in fails?
Its possible the affected user no longer exists as a principal? Does the same thing happen to this user regardless of which client computer is used? You could search the schema using dscl from a client to see if the affected user is listed in the LDAP database? Alternatively you could issue:
sudo kadmin.local -q list_principals
On the server itself. If the affected user is not listed but exists in WGM then review the password type. It's possible its been set to Crypt? You could delete the user and re-create the account again and re-locating the home folder and trying again. It's also possible the student's home folder has developed a problem? Does the 'jiggle' and error occur immediately or after a slight delay? Do you have a strict Password Policy in place? Sometimes problems can develop with the Password Policy (it does get logged) that affects single accounts only.
You could try and create a completely new account and home for the affected user. Transfer the data from the old home propagate default permissions and go for a log-in again. Does it work now?
I'm assuming the two servers in question are in a Master/Replica relationship?
Tony

Unable to log in to the portal - missing Directory Service?

Hi!
I'm unable to log in to the Management Portal, getting this error message:
"We are having trouble logging you into the portal. Your subscription does not have an associated directory and this is preventing us from logging you in. Please contact support."
I've tried to call Microsoft regarding this issue, each of the four times I was routed forward, given phone-numbers for Azure support and redirected, each call ended with basically the same reply "uuhhh... I don't support Azure, sir, and I don't know
how to help you..." - Microsoft needs to inform their frontline people better!
Anyways, at some point I was told that I have to "file a ticket" in the Azure support forums, and that a representative will call me up after. So here is the ticket, and I'm anxiously awaiting a reply.
In case I'm not clear - I have an urgent need to access the portal, as I need to put some more assets in there, aka *you're losing money, Microsoft!* (maybe that'll get your attention.. ;) )
Thanks in advance,
Thomas Qvidahl, supporter and fan of Azure, though faith is waning..
Best regards,
Thomas Qvidahl
Senior consultant, MCITP: EA & SP2010, MCT
EVRY Card Services AS
Nordland, Norway

hi Thomas,
We apologize for the inconvenience that caused by this encountered issue.
Firstly, I suggest you could try David Messner's solution from this thread (
http://social.technet.microsoft.com/Forums/windows/en-US/8713e5ca-965f-4e81-b6ea-8a9e95c58b79/we-were-unable-to-find-any-subscriptions-associated-with-your-account?forum=windowsazuremanagement ).
If it doesn't work, I would like to suggest you to try the one that mentioned by Tabrez at:
http://social.msdn.microsoft.com/Forums/en-US/7a2acffb-6419-4a3d-8fb4-c8258790a2bb/why-cant-i-sign-up-for-the-1month-free-trial
[quote]
Contact support here: https://support.microsoft.com/oas/?prid=14238.
-tm
[/quote]
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error ORA-12560 prompts when trying to log in to the Enterprise Manager

Hi all,
I am a newbie to Oracle.
Just installed the Oracle 9i Database Enterprise Edition (9.0.1) into Windows Server 2003 Standard Edition. Problem is encountered when trying to log in to the Enterprise Manager Standalone mode using either system/oracle or scott/tiger as credentials. Error "ORA-12560: TNS:protocol adapter error" prompts.
I tried to check with some configuration and see whether the services are started. Services of "OracleOraHome90TNSListener" and "OracleServiceORCL" have been started and the database exists in the dedicated directory. Environment variables of "ORACLE_HOME" and "ORACLE_SID" have been added manually as the SID is set to orcl, which I just follow what the instruction manual has stated. Moreover, I can't get access using command prompt typing "svrmgrl"; error returned stating " 'svrmgrl' is not recognized as an internal or external command, operable program or batch file."
Another information is that there is no domain set in my server. Just a server with a name being assigned in a workgroup.
Hence, would you mind please advice me what to do in order to get access into the Enterprise Manager? It's quite an urgent task.
A million thx in advance!
Best Regards,
Karen

Hi Jigneshrp,
Thanks for your reply.
It is checked that the listener is running and TNS name service exists. Following your advice, I did create a new listener and another name service and use them, but the same error turns out when trying to log in to the Enterprise Manager again.
Additional information to take note for is that while reconfiguring the existing listener or creating a new listener, a mesage prompts stating "The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as it is, but it will not be possible to start this listener until the conflict is resolved. Would you like to continue with the continue with the configuration anyway? Yes/No".
As for the reconfiguration or the new creation of TNS names service, when I am trying to test for the connection, the results in the details pane states that "Connecting... ORA-12560: TNS:protocol adapter error. The test did not succeed...."
Would you mind pls advice me on these?
Furthermore, there exist 2 questions I am wondering is that it is stated in the instruction manual that prior to the installation, a static IP should be specified for it instead of the DHCP one; hence, I wanna ask after the complete insallation, is it that the server should be running in the network, i.e. allow it to get connected with the outside network?
2nd question is that can Oracle 9i Database Server Standard Edition (9.0.1) be installed under a Windows Server 2003 Standard Edition and just a Window XP Professional?
Thanks for your reply.
Best Regards,
Karen

SAPJSF user cannot log-on to the User Management Engine.

We have a newly installed PI 7.0 system.
SLDCHECK is succussful but if we go to the http://hostname:50100/sld - we are redirected to http://hostname:50100/logon/logonServlet?redirectURL=%2Fwebdynpro%2Fdispatcher%2Fsap.com%2Ftc%7Esld%7Ewd%7Emain%2FMain
When we check the default.trc file, we see the error: User "SAPJSF" is the communication user for the connection between User Management Engine and the ABAP backend system SIDCLNTxyz. This user cannot log-on to the User Management Engine.
The SAPJSF user is not locked in SU01. This user is used by the JCO providers to connect to the gateway service.
We opened Visual Administrator and navigated to Server0 -> Services -> UM Provider
We changed the password property at ume.r3.connection.master.passwd
We then restarted the ABAP and J2EE engine. But we still see this error.
Any help to solve this issue is appreciate.
Jay Malla

Hi,
Please, refer the link below. It says you cannot logon with SAPJSF user to J2EE engine for security reasons.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/225b42eeb66255e10000000a155106/frameset.htm
Thanks
R.Murali

Logging in to the Community Erases My Questions I already Wrote.

Similar Messages

Maybe you are looking for