Logging niping test from SAP BODS server.

Hi All,
I am planning to do NIPING test in one of my BODS application server to test the connectivity from BODS TO APO, As I am new to this can you please let me know the steps to be followed to do this test.
I found couple of documentation and also referred to KBA 500235, but that didn't gave me sufficient info to the task.
Here are the details,
Microsoft Windows Server 2008 R2 Standard x64.
SAP BODS 4.0 SP1
Thanks & Regards,
Sairam Jalluru.

1.     SAP Content Server is installed and used for the SAP Data archiving files.
2.     A production archive run were executed in the DEV system for archive object EXAMPLE.
3.     The archive is stored successfully, but the delete job gives a HTTP access error with status as FINISHED.
4.     The archive file is deleted from the basic path/exchange directory with status u2018deletion completedu2019, stored completed and u2018archive file accessible from storage systemu2019.
5.     When read program is executed to display the archive file u2013 error u201Cno file openedu201D occurs
6.     Please see attached document for detail explanation of error and customising setup
7.     The print list archiving to the same content repository is successfully stored and accessible.
8.     Is different access required from ECC to access the data archived files stored on SAP CS?
9.     The connection to the SAP CS via OAC0, CSADMIN is successful.

Similar Messages

What are the things to be tested in sap xi server before going to use th

1) what are the things to be tested in sap xi server before going to impliment first interface?
2)what are prerequisites to be configured in xi server before implementing first interface?
ragards

Hi Dhanush,
>>>>>1) what are the things to be tested in sap xi server before going to implement first interface?
>>>>>2)what are prerequisites to be configured in xi server before implementing first interface?
For both of your question the answer would be
1. Check all the Post installation configuration has been done properly, with the help of the following links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
2. Make sure the latest BASIS Component have been imported into your design time environment
After this you can start developing your first interface
Regards
Ramesh P

API to retrieve data from SAP content server

Is there an API available to retrieve data from SAP content server?

Hi
you could check out function groups starting with OPT.
F.eks. OPTB, OPTC, OPTD
Also check function group ARCHIVOBJECT.
best regards
Thomas Madsen Nielsen

How to Access data from SAP Content Server through SAP Portal

Hi Experts,
I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
I am trying to use this URL into the CMS address but it is not working
http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Is there any other procedure for acceesing the DATA from SAP content server. ?
Thanks,
Ahmad

If your Content Server is being used by DMS, then you can use the DMS Connector for KM. This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM. For more info see this:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
Andrew

Outbound mails from SAP CRM server

Hi,
Is there any way by which Outbound mails from SAP CRM server can be routed to more than one mail servers?
Any suggestions or work arounds will be appreciated.
Thanks and regards,
Asheesh

Hello Asheesh,
it is possible to create more than one Mail Node in Transaction SCOT. The mail can then be routed depending on the Domain Name.
Regards
Gregor

SMS Provider for sending SMS from SAP BI server

Hello,
I need to send sms from sap bi server.
Which service provider is preferable to use for sending sms?
Any suggestions?

You can opt for IDEA...............

How to get list of logged-in users from Flash Media Server in a Flash programm? (Or login/logout notifications)

Hi there,
I'm Very sorry for asking this. I guess it's a very basic problem, but I'm very new to Flash and Flash media Server and I need a very fast answer...
Currently I'm working on a Director project using a flash program which connects to Flash Media Server (I guess version 3, it's quite old). Unfortunately they forgot to make a flash method to send the actual userlist (or a notification when someone logged in or out) to Director. AND, unfortunately, they lost the source code of that flash programm, so I cannot look into it or alter it *sigh*.
Now I want to do a new flash programm which covers the old one, letting all known methods "pass trough" and building an additional method to gain the user list (or login/out notification).
How do I get the login information from Flash Media Server? (Would be good if you could provide an idea already for flash code... as I said I'm a tard at flash till now)
Thank you so much. And I hope you understand my situation asking here...
Jana

hparmar : yes, that's what I feared... I hoped it would be possible to tell the server from which application I do need the login information. What a mess.
Dimo Hristov: thanks for your offer! I already tried decompiling the flash program with the shareware version of Trillix Decompiler. It only decompiled the UI (in a terrible way) but no source code at all. It was the shareware version where I can decompile 2 or 3 programms to test the software. Are you sure the non-free version of Trilix Flash Decompiler will do..?

C# retrieve report from SAP Crystal Server

I have installed SAP Crystal Server on a Windows 2012 Server machine. The installation looks fine. I can run the Central Management Console and everything appears to be up and running.
I have a Windows application running on my local machine and all I want to do is run a report.
myRCDoc = new ReportClientDocument();
myRCDoc.ReportAppServer = _server;
object path = reportName;
myRCDoc.Open(ref path, 0);
I get the following error:
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in Billings.exe
Additional information: Failed to connect to server "ENTBSQ01".
How do I make the server reachable from my windows code?

Thanks Dell!
I'm currently not logging into the CMS.
I'm not clear when you ask "working with reports from CRS"?
The *.rpt files are indeed stored on the server. My windows app simply calls ReportClientDocument.Open to get the report. I'm assuming that means I am indeed working with reports from CRS.
I'll try to logging in part first and then move to checking the SDK.
Thanks again!
-Terry

How to do Handshake with tired party(bank) HTTPS URL from SAP PI server

Dear Expert,
I have developed bunch of scenarios, all are synchronous ABAP proxy to HTTP_AAE with bank on PI 7.4(dual stack). Bank web server is HTTPS enabled server. Our ABAP developments are still in progress also we have few issue in connection from ECC to PI.but that is not the focus of discussion here.
we want to do the handshake to check the connectivity with bank on their HTTPS URL from PI. Bank has provided the privet key for SSL from their server and corresponding public key they have maintained on their server. I have imported the private key under NWA -> Certificates -> Key Storage -> TrustedCA->Import Entry->Entry Type->PKCS#12->select the SSL.p12 file->import , also I have selected the option to "Use SSL" in HTTP_AAE receiver communication channel and selected the corresponding entryin "keystore view" and "keystore entry". All these I have done in our DEV system, and we are trying to connect our PI dev to bank Dev server.
Questions
Is there any specific steps to do the handshake with third party HTTPS(bank in my case) server? if not, how can we just test the HTTPS connectivity by using the SSL private installed on our PI server, without running the complete scenarios. Our PI has been installed on UNIX, and "telnet https url 443" is working, as network team has opened the HTTPS port.
We have not enabled the SSL technically on our PI server, and we have not installed any generated certificate from our PI server. Moreover, we have not made our PI url as "https:hostname:port" as we just need to communicate with bank by using their private key. Do you guys think we should enable the SSL? if yes, please explain why.
What is the best practice to test the connection with third party having HTTPS URL? how can I just assure HTTPS communication is working fine, before testing my actual scenarios.
Thanks for helping always.
Regards,
Farhan

Hi Farhan,
Some part of the blog is applicable for sending HTTPS request to partners/third party (Receiver SOAP Adapter).
If banks certificates are already in trustedCA, then, can you check if it also imported under user PIISuser under Identity management in NWA. If above 2 steps are done then i think your are good to go. But be careful when you install certificate, it should be in proper order.
As you already mentioned, connectivity is already established and you are able to PIng/telnet from pi server, connectivity looks ok.
While sending request, if you are getting 401 unauthorized, below might be the reason -
1. Certificate not installed correctly or some missing steps
2. Partner or TP is not ready to receive it, some certificate issue in there side.
other than 401 means you are ok (As per certificate and Connectivity) - 403 and 500 errors are next stops.
403 - error because of encoding method.
500 - data issue.
Regards
Aashish Sinha

How to migrate from SAP content server to OPENTEXT?

We have been using SAP content server as our storage for archived data for years.
Now we plan to start using OPENTEXT to admin our archived data.
How can we use OPENTEXT together with existing SAP content server?
My idea is to treat content server as any other media as as DVD, WORM, etc.
However, I do not see that OPENTEXT can be configured to admin content server .
If so, how to transfer whatever on the content server to IXOS?
We are at Opentext 9.5.x
Please share your experience. Thanks!

hi,
Please refere SNote 1043676.
Also, need to understand the following,
How to move an entire content repository from one content server to another
Sometimes you may need to move a content repository - but not necessarily all the content repositories from one content server to another. This can be done without much drama. Here is a means that I've used in the past:
Use report RSCMSEX to export the repository from the source content server.
Create a repository of the same name on the target content server.
Use Report RSCMSIM to import the repository into the target content server.
Delete the repository from the source content server (if desired!).
The SAP progrm sapkprotp controls the import and export. The ABAP reports allow you to specify the RFC destinations where sapkrpotp runs.
For lager repositories
The programs listed above cannot deal with the whole content repository at the same time. For a slower migration, try using the program RSIRPIRL. This approach allows you to do the migation on a live system.
Create the new content repository on your new content server.
Create the new content category.
If using distribution, distribute the new documents to the new category. otherwise change redirected category for DMS_C1_ST
Relocate using the program.
benaakraja

How to get pdf file from sap presentation server using java connector

Hi Friends,
with the below code i am able to get po details in pdf in presentation server.
DATA : w_url TYPE string
 VALUE 'C:\Documents and Settings\1011\Solutions\web\files\podet.pdf'.
CALL FUNCTION 'ECP_PDF_DISPLAY'
 EXPORTING
 purchase_order = i_ponum
 IMPORTING
PDF_BYTECOUNT =
 pdf = file " data in Xsting format
*Converting Xstring to binary_tab
 CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
 EXPORTING
 buffer = file
APPEND_TO_TABLE = ' '
IMPORTING
OUTPUT_LENGTH =
 TABLES
 binary_tab = it_bin " data in binary format
**Downloading into PDF file
 CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
BIN_FILESIZE =
 filename = w_url
 filetype = 'BIN'
 TABLES
 data_tab = it_bin
when i am using java connector , to retirve the file from presentation server , the follwoing error i am getting...
init:
deps-jar:
compile-single:
run-single:
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in Control Framework
 at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
 at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
 at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
 at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
 at PdfGen.<init>(PdfGen.java:35)
 at PdfGen.main(PdfGen.java:78)
Java Result: 1
BUILD SUCCESSFUL (total time: 1 second)
i debugged too, problem with gui_download......
I am very glad to all with your suggestions!!
Regards,
Madhu..!!

Hi
You can try to create an external command (transaction SM69).......sorry I've forgotten,,,,they works on application
How do you call CL_GUI_FRONTEND_SERVICES=>EXECUTE?
Max
Edited by: max bianchi on Oct 13, 2011 10:27 AM

Hiii capturing error when uploading file from sap to Server

hiii
i am taking data from an internal table which is as follow
ITAB:
colA(35) type c
colB(35) type c
when doing opendataset
OPEN DATASET lv_directory FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
spliting my itab by the delimiter "|"
i need file already exist i must not over overwrte the file i must throw an error but how do the open dataset for output will overwrite the file how do i prevent that. how can i check that a file of that name exist.
do i try to open dataset for input first then if sy-subrc EQ 0 it meant that a filename already exist

Hello,
Do something like this:
DO.
READ DATASET file INTO <hex_container>.
IF sy-subrc = 0.
" File exists
ELSE.
OPEN DATASET....
ENDIF.
ENDDO.
Regards.

SAP BODS and SAP APO

Hi
Can some one guide me on How to extract SAP APO Data in to BODS?
regards
Raj

Hi Rajeev Parimi,
Create a RFC connection in SAP Data Services Management Console for your SAP APO.
Provide required details.
Log into your SAP APO
Provide T-Code SM59
Create a RFC connection. Provide Registered Server Program name(RFC ProgramID Created In DS Management Console).
Save the connection and then test the connection.
Now log into Data Service Designer
Go to Local Object Library and select Datastores Tab.
Right Click and Select New
Then select Data Transfer Method as RFC and provide your RFC Name.
Provide all the required fields.
select OK
Note: RFC Data Transfer Method is available from SAP BODS 4.1 Version
Regards,
Akhileshkiran.

How to tranport the users from SAP R/3 to portal ?

Hi All,
I had connected to SAP R/3 system from portal. I am trying to tranport the users from SAP development server . So that everyuser can enter through the portal only and work on SAP.
Please guide me the procudure how can i tranport the users from SAP system to portal.
Please urgent replies are appreciated .

Hi Abhishek,
Thanks for your information.
please let me tell you the detailed information. My basis guy had configured the system for me as i didnt have any idea on installation procedure. So i am facing th e fallowing problems.
 First Problem
I am not able to create the user from portal directly. Its showing the fallowing error.
An error occurred in the persistence; contact your system administrator.
so i had created the users in WAS by SU01.
Second
We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
If u dont mine Please provide with me the steps to fallow
Third
i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
Its showing the error
Could not able to look up the system.
And the problem with user mapping also .
For aministrator its working fine .and for a general end user ( created on WAS )
i am not able to provide user mapping. Its showing
There are no systems available for user mapping for the selected principal
wat could be the problem ?
Your solutions will be appreciated .please urgent

Scripts in SAP BODS 4.0

Hi Everybody,
Can i use Scripts as is in SAP BODS 4.0?
Recentaly we have installed new version on SAP BODS 4.0 from SAP BODS 3.1. We have migrated all the related jobs, datastores and all the related stuff.
When i try to validate one job in new version then at scripts, i was getting an error on using SQL() functions.
While working on the function in scripts, do we need follow any procedure?
Please let me know.
Thanks,
Mohammed.

Check whether you have the rep_funcinfo.atl under "C:\Program Files\Business Objects\BusinessObjects Data Services\Admin\Repo" folder.
If not then bring that atl file in the specified folder.
I hope, it will work.

Logging niping test from SAP BODS server.

Similar Messages

Maybe you are looking for