Logic to get stock in hand.

Hi All!
What is the logic for the stcok in hand.
There are several stocks like restricted stock,blocked stock,stock in quality inspection etc..
How can i get the total in hand
Regards
Praneeth

Hi Praneeth,
The stock in hand is the quantity in Unrestricted use.
The quantity in the Quality inspection can be rejected or accepted.
If the quantity in the Quality inspection is rejected it can be sent to the blocked stock or scrapped.
If the quantity in the Quality inspection is accepted it comes to the Unrestricted-use stock.
So, the stock in the Unrestricted use is the stock in hand that can be used for delivey & billing.
Kind Regards,
Thangesh

Similar Messages

  • Not getting Stock on hand in May Month,while getting in April(Urgent Please

    Hi,
    In my BW, there are countable records, those have posting date as 31.01.2008. and it has stock of 96.4 kg. Since "Stock On hand" is calculated on fly and it gives snap shot.
    I can see the same value 96.4 kg, for next all days till April 2008.
    But suddenly I see no record in query for month May 2008. Though it should give me the same 96.4 kg value in May month also. As it was doing for last three months.
    Please suggest any solution.
    Thanks and Regards
    Saurabh Tiwari

    Please check the TimesTen message logs (<tt_install_dir>/info/ ttmesg.log and terrors.log) on both nodes for messages relating to 'clock skew'. In order for replication to function the system clocks on all participating nodes must be synchronised to an accuracy of <= 250 ms. If they are not then replication will not operate. The symptoms you describe are typical of unsynchronised system clocks.
    Chris

  • Stock in hand against po no.

    hi all,
    i want to develope a report in which stock in hand(from mb52 tcode) will be displayed against p.o no.format like this
    plant          material             batch          stock in hand           po/sto no.
    my client wants the report in which stock that is placed in storage will be displayed by po sto no.
    currently we are using two step sto procedure by usung 351 and 101 movement type.
    pls help
    regards
    sumit bisla

    Make them understand that this not a logical requirement as you can't establish a link of PO/STO for stock in hand.
    Let me tell you why it is so..if suppose you have received goods against 2-3 PO/STO & Now you are issuing goods (stock transfers/Billing/Transfer posting/Goods Issue etc), at that time system does not consider the corrosponding STO/PO against which goods are received.
    Inventory of material will decrease based on batch/valuation type which you have selected.
    Refer Tcode ME80FN click on Change Veiw & select Purchase Order History with this you can get STO/PO-GRN Qty & Value details.
    Last button on Application tool Bar it is in line of filter, total etc icons

  • Calling MB5B from a program to determine stock on hand as on date

    Dear friends,
    I want to call transaction MB5b from my report passing (matnr, plant and selection date-sy-datum ) values from internal table (11500 records) and fetch the quantity field that gets displayed after executing. How to do that. can anyone write the code for that. Because writing full program for determining stock-on-hand seems meaningless as we can get that value from MB5b. Can we trap that parameter in the standard program RM07mlbd and import that parameter to the program. Any suggestions.
    Please write full code. I guarantee Points would be rewarded if solved.
    Regards.
    D.P.Mallick

    Hi,
    could you please post the code how it was done. I am facing a similar issue.
    Regards
    Mohan

  • Table to get "stock of material on a past date "

    Hi Guru's,
    Can anyone tell me "how to get stock of material on a past date".
    Pls tell me from which Table you can fetch these values and in what logic.
    Any Input is highly appreciated.
    Thanks and Regards,
    Selva

    Hello,
    You can get the stock from the table MARDH, MCHBH period wise.
    this table is use for history stocks.
    Regards
    Bhima

  • Stock on hand at a point in time

    Hi Experts
    I am busy doing an inventory report in Crystal. I need to pull the stock on hand for all the items for each month (past 4 years, +-2500 items)
    At the moment, i am taking inqty - outqty where date <= (beginning of each month)
    My report is taking forever to process the info.
    Is there any other way I can get the stock on hand at previous points in time? Or any tricks to help SQL process the data quicker?

    Hi Bradely,
    I've a query pulling opening stock in qty from the system.
    Through unions on all the transaction tables i'm pulling the data warehousewise.
    It hardly takes any time.
    I'm trying to print stock value too. Which I'm unable to figure out.
    If you want I'll pass that query.
    Any idea about how to figure out stock value ?
    Thanks
    Malhaar

  • Sales Block for order whose quantity exceeds % of available stock on hand

    Hello gurus,
    I am wondering if there is standard SAP functionality that could enable the following scenario:
    For a material in material group XYZ, if a sales order is entered that exceeds 50% of stock on hand, a delivery block is placed on the order.  If a sales order is entered that is under 50% of stock on hand, no delivery block is placed on the order.
    The number 50% is arbitrary and would be specified based on the material group.  As well, this can be based on the material.  I'm hoping there is configuration out there that would block the delivery creation if an item on the sales order exceeded a pre-defined % of available, unrestricted stock in the plant.  Any help would be greatly appreciated!

    Hi Andy,
    Let me summarise ur question - You have Material - A, B & C all of them belonging to a particular Mat. Group lets say - 444. Lets think if the stock of all the Materials - A, B & C is 100 CS's.
    When a Sales order is created for Material - A for Quantity of 60 CS - You want a Delivery block.
    If my understanding is yes, I think the requirement is too complex, but achiviable.
    Because -
    - If this can be achived its possible with only User exits, but the requirment is linked with Availability,
    - If we want to implement this in the Save user exit, the code has to go check the stock in availability and if the conditions are met needs to block the delivery,
    - you need to consider the stock situations as the re-scheduling will also be happening in the background,
    - Wht would happen if there are more than 1 material entered and both are different Material grounps. [Need to consider this scenario as well]
    Instead of Delivery block - You can implement the changes to Reject the line if the % crosses. That is reason for rejection. As this is more specific to line item.
    Create a Z* table and update it with the Material groups that you are planning to use. And give the %.
    Implement the code changes in the Save user exit in MV45AFZZ to check this table for each material group and validate it and then compare the Ordered Quantity with the available stock of that material. Not sure though from where you want to get the stock figures.
    I tried, but this might be a start. All the best.
    Thank you,
    Chaitu...

  • Stock determination, Stock on hand "E"and vendor stock

    Hello all,
    I would like to know the process of stock determination and how it works. is the stock determination active only for special stocks.
    how are the consignment and special stock - "E" - stock on hand created in SAP.
    Thanks,
    Maxx

    Hi
    Consignment stock is special stock 'K' and this means that you do not own it and it is not valued until you remove the 'K and then you will have a requirement to pay for it. This needs to be done in agreement with a vendor so that they will allow you to pay only when you use it and you will need the vendoe setting up as a consignment vendor and when you create the PO you create it for special stock 'K'.
    Special stock 'E' is Sales order stock which means that the stock is allocate to a specific sales order and can only go to that sales order and if you try to pick it for anything else you should get an error.
    I hope that this helps
    Frenchy

  • How can config for SNP Aggregate only aggregate demand not stock on hand?

    Dear SCM Expert,
    Now we want the system aggregate only demand and not aggregate stock on hand ( Stardard system aggregate both of them) so what i have to do?
    thanks so much.

    Hi
    The stock on hand is a calculated key figure. It is calculated based on macros. So you have to write a macro or you can copy the stock balance macro logic from the standard detailed book. In the detailed book no aggregation is done. But to avoid aggregating stock on hand you have to put logic in the macro
    Thanks
    Aparna

  • Stock on Hand after GR

    Hi,
    I need to know how I find the stock on hand after a GR, what tables could be used to get the relevant data
    cheers
    B

    Hi,
    You can get the details from MMBE or from table MARD for storage location or MCHB for batches.
    Thanks.
    Sathish

  • How to calculate stock on hand initial based on VALUATED not Category group

    Dear Expert,
    Now, i want run SNP with initial stock on hand calculated by stock on hand based on VALUATED not category group like CC or CI. Because in ECC we used a lot of valuation types for materials.
    please show us.
    thanks so much
    hungth

    Hi,
    1) You need to answer the question whether you really need this 200 quantity in APO or not? Is your requirement only relevant to SNP? Or that even for GATP, PPDS, etc you don't want to get this 200 stock in APO. If you don't want this 200 quantity in APO at all, then what I said  earlier would be applicable. You could try to have enhancement in CIF so that valuation type AKDTCLT1(200 quantity) gets exluded in CIF and doesn't reach APO. I am not really sure how simple or complex this could be, but most likely should be possible.
    2) Once the stock is in APO, are you able to distinguish between the 2 stocks in anyway? As far as I know, it won't be possible to distinguish. You could see the version (batch from R/3), and the stock category. I am not sure if valuation type info would be available in any way in APO, but may be I am wrong. Even if you were somehow linking the stock valuation type to the storage location stock, I think only possibility for your would have been to block storage location specific stock to come to APO in CIF (for ALL storage locations), but the stock at Plant level would still come to APO.
    If somehow you are able to distinguish the stock based on valuation type, then Ada's solution could be used.
    Thanks - Pawan

  • Ageing Report(STOCK IN HAND)

    Dear All,
    Can I have ageing report for stock in hands (Lot based ) in PP/MM
    modules.
    Kindly give your advises .
    Thanks In Advance
    Rakesh Sehgal

    Hi Rakesh,
    pls check below two tcodes
    1. MC46 - Slow Moving Items
    2. MC50 - Dead stock items
    Regards,
    Sankaran

  • Function Module available to get Stock lying against a Sale-Order

    Dear Sir,
    We have function module "KPKA_UTILS_PROJECT_STOCK_CHECK" for getting Stock lying against a WBS (Project Stock) .
    We are looking for a function module to get the Stock lying against a Sale-Order (Sale-Order plus it's Line Item) .
    We request SAP experts to kindly guide us about the availability of such Function Module please .
    We will award full points for the suggested solution pl .
    Rgds
    B Mittal

    Hi
    table MSKA - Sales Order Stock is availble whcih will give the Stock pertainig to a sales Order & line item.
    Hope this helps
    Thanks & Regards
    Kishore

  • Stock on hand problem

    Hi All,
    what are the steps to perform the uploading of actual qty of items in the warehouse every end of months ? we begin to calculate qty of items in the warehouses (disregarding qty in system (SBO)) from date 30 to date 4 of early of next month. We use stock taking template, inventory tracking and stock posting but some items will have negative stock on hand qty, what is the causes ? are the ordered and committed influence this stock ? Thanks in advance.
    Balaj

    The negative stock is because you have not checked in Admin > System Init > Document Settings > Block negative inventory.  Showing negative inventory is not a good business practise as  tangible goods can never be negative.  This On hand quantity is not affected by Ordered or committed.  This is purely what is physically in the warehouse.
    You must first change the setting to Block Negative Inventory.
    Then you must using Stock taking DTW template to import monthly stock balance and reconcile stock using Inventory Quantiy, Inventory tracking,.. option.
    Suda

  • Function module for getting stock details for a given period or date range

    Hi experts,
         Any function module available for getting stock details batch, plant, storage location, and period wise. <<removed_by_moderator>>
    Thanks in advance
    M Prasanna
    Edited by: Vijay Babu Dudla on Apr 28, 2009 7:23 AM

    Hi,
    Try with this FM:
    BAPI_MATERIAL_AVAILABILITY .
    Go through this link for more details:
    ABAP Development
    by
    Prasad gvk.

Maybe you are looking for

  • Home sharing/syncing iTunes on two "sides" of Boot Camp?

    Hello, I recently switched from my old OSX-only computer to a new one that runs both OSX and Windows through Boot Camp. I would like to use both "sides" equally (as I have both a lot of OSX only software as well as plenty of PC-only games), and as su

  • How can i add the status bar to the bottom of iTunes 11.4?

    In the past, on Itunes 11.0, when I opened the program, there would be  a bar on top that would read, "File, Edit, View, Controls, Store,Help"  and below , a status bar that would tell me the number of tracks in  a playlist and duration, "7 Songs, 28

  • Display Technical Field Names within a Transaction Screen

    Hi All, Someone once showed me how to do this and for the life of me I cannot figure out how to do it in ECC 6.0. I would like to display the technical field names of all fields in a transaction.  It is important to note that I am not looking for the

  • Fine-Tuned Control: Purchase Order

    Hello When I make : SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define message type for purchase order->Fine-Tuned Control: Purchase Order What means the  U=>Update print-dependent data Somebody could tell wh

  • I can't send a text message from my new iPhone 5 ??

    what the merucal to send text message