Logical naming of server

Hi,
In my scenario when i give the location as 10.10.10.64\test\empinfo.xml it is working the servername is pidev when i change and give as pidev\test\empinfo.xml it could not able to detect.
Please let me know how to change this.
Thanks,
SrinivasaP

Hi Srinivas,
You need to maintain entry in "Hosts" file located on server "pidev".
Logon to system - pidev and open file C:\WINDOWS\system32\drivers\etc\hosts
=>Maintain entry there as:
10.10.10.64 pidev
Cheers,
Vijay Raheja

Similar Messages

Async named pipe server

I was looking at some threaded named pipe server code compared to async implementations such as http://www.codeproject.com/Tips/492231/Csharp-Async-Named-Pipes and
I am wondering how this works in a busy env, only one client can be processed concurrently as another instance is only spun up once the single running instance finishes.
Does anyone know of any async implementations that are complete that I might study?
Thanks.

This type of async does use a threadpool, but you don't manage the callbacks directly since it's an IO type and not a worker type. I'd base the decision on what I was more comfortable doing.
What do you mean by unable to enumerate the actual pipe name? I haven't explicitly tried with WCF, but even if it doesn't directly expose it, a named pipe is going to boil down to a file handle that is open in the process. The name of the pipe
can be extracted from the handle with
GetFileInformationByHandleEx. System.Reflection would let you see private members down to the point of where that pointer is if nothing else.
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

Problem using DG4ODBC with named SQL Server instance

I am running DG4ODBC on a 64 bit LINUX machine with the Microsoft SQL Server driver installed. I have successfully tested this with a SQL Server instance that was not named (GENERALI_DSN).The named instance gives the following when trying to query:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Microsoft][SQL Server Native Client 11.0]Login timeout expired {HYT00}[unixODBC][Microsoft][SQL Server Native Client 11.0]SQL Server Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. {08001,NativeErr = -1}[unixODBC][Microsoft][SQL Server Native Client 11.0]A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. {08001,NativeErr = -1}
ORA-02063: preceding 2 lines from DEVMISC
odbc.ini
[GENERALI_DSN]
Driver                  = SQL Server Native Client 11.0
Server                  = CLTDMJCWBYZ.eu.scor.local
User                    = everest
Password                = everest
Database                = Everest_Generali
[DEVMISC_DSN]
Driver                  = SQL Server Native Client 11.0
Server                  = [USVCLTDEVSQL02\DEVMISC]
User                    = link_user
Password                = password1
Database                = DBA
initDG4ODBC2.ora
# HS init parameters
HS_FDS_CONNECT_INFO = DEVMISC_DSN
HS_FDS_TRACE_LEVEL = DEBUG
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
listener.ora
SID_LIST_LISTENER_GW =
   (SID_LIST =
      (SID_DESC =
       (SID_NAME=DG4ODBC)
      (ORACLE_HOME=/home/oracle/product/11.2.0)
      (ENV=LD_LIBRARY_PATH=/usr/lib64:/home/oracle/product/11.2.0/lib:/opt/micro
soft/sqlncli/lib)
      (PROGRAM=dg4odbc)
      (SID_DESC =
       (SID_NAME=DG4ODBC2)
      (ORACLE_HOME=/home/oracle/product/11.2.0)
      (ENVS=LD_LIBRARY_PATH=/usr/lib64:/home/oracle/product/11.2.0/lib:/opt/micr
osoft/sqlncli/lib)
      (PROGRAM=dg4odbc)
LISTENER_GW =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = usvcltprdoragw)(PORT = 1521))
tnsnames.ora
DG4ODBC =
   (DESCRIPTION=
      (ADDRESS=(PROTOCOL=tcp)(HOST=usvcltprdoragw)(PORT=1521))
      (CONNECT_DATA=(SID=DG4ODBC))
      (HS=OK)
DG4ODBC2 =
   (DESCRIPTION=
      (ADDRESS=(PROTOCOL=tcp)(HOST=usvcltprdoragw)(PORT=1521))
      (CONNECT_DATA=(SID=DG4ODBC2))
      (HS=OK)
I can't figure out why the named instance does not work but the other one does. Any help would be greatly appreciated!

Did you check with the ODBC test utility isql (it is installed by default when you install the unixODBC Driver manager) if your ODBC driver can connect at all to that named instance? I have some doubts that it will work either as there was a blog commented by a MS engineer:
Introducing the new Microsoft ODBC Drivers for SQL Server - Microsoft SQLNCli team blog - Site Home - MSDN Blogs
who states that named instance connections are not supported using that driver.
- Klaus

Difference in Domain Configuration of Web Logic 8.1 Server

I am novice to the Web Logic, using 8.1 Server on windows for deploying axis based web services.
When I start the server with the script \\bea\weblogic81\samples\domains\workshopstart\WebLogic.cmd, the web services work fine
but, when I create a new domain and start the server or when I start the server using \\bea\weblogic81\server\bin\startWLS.cmd script, I allways end up in getting a NullPointerException for web service calls.
Can anybody help me finding out the difference in the configurations please? FYI, for all these kind of server startups, EJBs respond good.

I am novice to the Web Logic, using 8.1 Server on windows for deploying axis based web services.
When I start the server with the script \\bea\weblogic81\samples\domains\workshopstart\WebLogic.cmd, the web services work fine
but, when I create a new domain and start the server or when I start the server using \\bea\weblogic81\server\bin\startWLS.cmd script, I allways end up in getting a NullPointerException for web service calls.
Can anybody help me finding out the difference in the configurations please? FYI, for all these kind of server startups, EJBs respond good.

Logic on Leopard Server?

Has anyone tried using Logic Pro on Leopard server? I plan on buying an Mac Pro with Leopard server installed, but still plan to run my basic applications (CS4, BootCamp, Logic Studio, Office, etc).

J24Keys wrote:
Has anyone tried using Logic Pro on Leopard server? I plan on buying an Mac Pro with Leopard server installed, but still plan to run my basic applications (CS4, BootCamp, Logic Studio, Office, etc).
I would not... Logic is not an application for use under a server, with other computers accessing it. It is an application meant for use on one computer at a a time.
Is there an important reason you need Leopard Server?

SQL State S0001 error code 18456 for named sql server : jdbc errors

When I try to connect to named instance of SQL Server 2005,the error I get it
The database user has data reader and writer rights.
I have used sqljdbc4.jar
url is jdbc:sqlserver://SERVER_NAME:1433;databaseName=DATABSE_NAME;user=USERNAME;password=USER_PASSWORD
I also tried using the jtds driver and I get State 28000 error

You might want to make sure that the instance is specified.
For example, when connecting to SQL Server 2008 using DBVisualizer (free) with SingleSignOn authentication, you need to use the jTDS driver AND you have to specify the instance on the server in order to connect.
Instance-less connection requests are rejected with the same error message as wrong password:
java.sql.SQLException Error Code: 18456

Change of the backend logical system server

Hi all,
Our client is changing the backend logical system's server which is of ECC 6.0 moving all the transports in production from ECC system to another.
Can anyone explain what will be the impact to the SRM server? We have SRM 5.0( two clients one for EBP and another for SUS) and ECC 6.0 as the backend.
Do anyone else share their experience while changing the backend server in this case?
Our client says they will use the same name of the logical system so that all the config with that logical system name is taken care of.
Any thoughts on this please.
Best regards,
Sridhar.

Hi Dinesh,
Yes we are using backend material groups and materials. I hope you are speaking about the CRMPRLS (in R3) and CRMMLSGUID (in SRM) tables GUID entry for the backend logical system. We will verify that entry.
But can anyone has come across the same scenario,
You mean to say we have to follow the steps and do material replication again for the new backend server.
We have a plan to use same logical system name for the new production server also.
Any clues/suggestions.
Best regards,
Sridhar

Logical standby issue after adding a new user at production db server

Hello Experts,
I am facing a issue related to logical standby db server where after adding a new user at production db server logical standby has stopped sql apply. Can anybody give some idea to find out the root cause and give some tips to resolve the issue.
tried below .....
SELECT EVENT_TIME, STATUS, EVENT FROM DBA_LOGSTDBY_EVENTS
ORDER BY EVENT_TIMESTAMP, COMMIT_SCN, CURRENT_SCN;
got error
ORA-16227: DDL skipped due to missing object
ORA-01403: no data found
ORA-00942: table or view does not exist
OS : RHEL 4 (IBM P5)
DB : Oracle 10g (10.2.0.1)
Achyot

Please let me know if can skip the DDL at which it is failing.
ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Use EXECUTE DBMS_LOGSTDBY.SKIP
ALTER DATABASE START LOGICAL STANDBY APPLY;
Thanks,
Renu

Naming Server Used for Transfer ID

I would like to used the Transfer ID option to go from NetWare 6.5 to OES 11.2 and I am wondering what I should be naming the server I am going to...

Try do it on another web browser like Chrome or Firefox if you can download them.

Error in Starting the OBI Server

Hi ,
i have installed OBIEE in solaris box and configured Web Logic as application server .when i tried to start the OBI server i have the following error message.
[nQSError: 46116] The locale en_US.UTF-8 needs to be installed on the machine for the Oracle BI locale setting English-usa specified in NQSConfig.INI
Please help me and i appreciate experts advice.
Thanks in advance.

we installed en_US.UTF-8 be in the solaris box and its resolved now. I posted thinking this message will be useful for future reference

Deleting the data from logical file/unix file

Hi all.
I need to delete the all the data from logical file (application server file/unix file).But I dont want to delete the logical file ( only data in the logical file should be deleted, i.e making file empty)
Thanks in advance.
Cheers.
sami

Hi Sami,
Refer thsi document https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4d7aeb7d-0c01-0010-fa8a-a4a8e8968a93.
Regards,
Flavya

Convertion pdf file from App. server to Pre.server

Hi,
I have file pdf file in application server. i want to convert this PDF file into presention server.
plese send simple progrme.
Thank&
Regards,
Madhu

Also try
FYI
REPORT ztrans01 .
*Parameters(files)
PARAMETERS: ux_dir TYPE epsf-epsdirnam OBLIGATORY
 DEFAULT '/usr/sap/trans',
 filename TYPE epsf-epsfilnam OBLIGATORY DEFAULT 'test1',
 pc_dir TYPE rlgrap-filename OBLIGATORY
 DEFAULT 'c:\tmp'.
*DATA(Strings)
DATA itab TYPE TABLE OF string.
DATA wa TYPE string.
DATA file TYPE string.
DATA size TYPE epsf-epsfilsiz.
DATA ux_file TYPE epsf-epspath.
DATA mode TYPE epsf-epstxtmod.
*start-of-selection
START-OF-SELECTION.
*1) transfer
CONCATENATE ux_dir '/' filename INTO ux_file.
OPEN DATASET ux_file FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
 MESSAGE i502(me) WITH ux_file.
ENDIF.
DO.
 READ DATASET ux_file INTO wa.
 IF sy-subrc <> 0. EXIT . ENDIF.
 APPEND wa TO itab.
ENDDO.
CLOSE DATASET ux_file.
*2)download
CONCATENATE pc_dir '\' filename INTO file.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = file
 TABLES
 data_tab = itab.
OR
*& Form f1104_download_to_lofile
 Download to data from internal table to Logical File/application server
FORM f1104_download_to_lofile.
Open the file in application server
OPEN DATASET v_filepht FOR OUTPUT IN TEXT MODE.
IF sy-subrc <> 0.
 MESSAGE s185 WITH v_filepht.
 LEAVE LIST-PROCESSING.
ENDIF.
LOOP AT i_logfile INTO w_logfile.
 TRANSFER w_logfile TO v_filepht.
 CLEAR w_logfile.
ENDLOOP.
IF sy-subrc = 0.
 WRITE:/ text-055, v_filepht, text-056.
ELSE.
 WRITE:/ text-057, v_filepht.
ENDIF.
Closing the file
CLOSE DATASET v_filepht.
and also check link
http://sap.ittoolbox.com/code/archives.asp?d=2285&a=s
Hope thisll give you idea!!
P.S award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

New, Single Server - DNS, Web, Wiki, Mail Setup Issues

I'm having some issues properly setting up 10.7.3 to host internal DNS and external Web, Wiki and Mail. I'm having issues with the web and wiki hosting. Since those are the most important right now, I haven't really had a chance to fully test the other features. I was able to do some testing of the mail and iCal but it was limited.
Long read below but I thought the specifics would be helpful...
My goals and configuration are:
***GOALS***
Primary:
1) Host a public website: example.org and www.example.org
2) Host a public wiki: main.example.org and www.main.example.org
3) Host a public mail server: [email protected]
4) Host a public, group calendar
4a) Read only to majority - Read/Write to a group
5) Host a global address book for authenticated users
Secondary:
6) Allow anonymous public access to a file share (read only)
7) Allow authenticated access to the same file share (read/write)
8) Do as much of this via GUIs as possible.
***SETUP AND CONFIGURATION***
Physical:
1) Business class Internet (no blocked ports)
2) A single, public and static IP address
3) Domain name and public DNS via GoDaddy
4) Wildcard Cert: *.example.org from GoDaddy
5) Late 2011 (bought in Jan 2012) MacMini Lion Server (the $1,000 one).
5a) Upgraded the RAM to 16GB (need for VMware Windows clients)
5b) Added two USB to Ethernet adapters.
6) Using a new model AirPort Extreme Base Station (bought w/ the MM) as the main router.
Initial Configuration:
7) Setup a Mac Address reservation for the main and two USB Ethernet ports along with the wireless too.
7a) Main port = 10.0.1.5 / Others are .6, .7 and .10
8) During the setup, I chose the Host on the Internet (third) option and named my server: main.example.org
9) After the setup completed, I upgraded the OS & Admin Tool to 10.7.3 from a clean install (on #5 now)
DNS Config
10) I used the admin tool to open DNS and change:
11) "Primary Zone Name" from main.example.org to example.org.
12) In the "Nameservers:" block, I changed the zone name there but left the nameserver name alone (zone: example.org /// Nameserver Hostname: main.example.org).
13) The Machine Name and Reverse Zone was left alone. RZ resolves to main.example.org. sudo changeip -checkhostname is good. dig on the example.org and main.example.org are good to go (NOERROR).
OD Config
14) From the server app, I clicked Manage/Network Accounts and setup the OD - No issues.
SSL
15) From the server app, I created self signed cert, generated a CSR, got a public Cert, then replaced the self-signed with the public one - No issues.
16) Changed any service using the self-signed cert to the public one - No issues.
17) Changed the cert in the OD to the public cert from server admin - No issues.
In order: File Sharing, Mail, AB, iCal, Web, Wiki, Profile Manager, Network Groups, Network Users
18) File Sharing was setup using the server app
19) Setup mail using the server app to start it and the server admin app to configure it - No issues there (I think...)
20) AB - Flipped the switch to on
21) iCal - Flipped the switch to on - I setup the e-mail address to use after I added the network accounts.
22) Web - Flipped the switch to on - Default site worked (main.example.org)
23) Wiki - Flipped the switch to on - Default wiki worked. (main.example.org)
24) PM - Checked the sign config profiles and enabled the device mgt. I then flipped the switch to on - Default settings and pages worked.
***MY PROBLEMS***
Website:
Adding a website for example.org gave me the red dot in the server app. To fix that, I added a Machine Name record to my primary zone (PZ = example.org Machine Name = example.org). I first tried using the same 10.0.1.5 IP as the main.example.org and left the reverse mapping alone (still resolved to the NS of main.example.org).
That gave me the green light in the server app when trying to add the website again. From there, I changed the "Store Site Files In" to the location of my website files (and confirmed "Everyone" has Read Access in the folder's security settings). I left the other info alone (all defaults accepted) and clicked done.
Access to the website works on the server but external access doesn't (Network Error/timed out tcp_error). Checked the AirPort settings using the AirPort utility (version 5.5.3) and the Port Mapping (under the "Advanced" icon) show serveral services all pointing to 10.0.1.5. Thinking it could be DNS I tried main.example.org externally and it failed the same way.
I ran the changeip command (good to go) and dig on example.org and main.example.org and they both resolved to 10.0.1.5 correctly.
I removed the example.org Machine Record from the zone and it now looks like:
PZ=example.org / ZONE=example.org / NS=main.example.org
Machine Record=main.example.org / IP=10.0.1.5
RM=10.0.1.5 / Resolves=main.example.org
PLEASE HELP!

The amount of users (if relevant):
On site - 1 (Me)
Off site - 16 (Windows clients - some have iOS devices too)
Web site traffic - less than 50 regular visits per day (avg of 15) with a peek of ~125 once a month.
This is for a 501c3 public nonprofit made of all unpaid volunteers (including the officers and directors). All of us have paying day jobs and I just so happen to be the guy that knows just enough to get myself in trouble here.

Can no longer access Acrobat shared review server

Hello. We are using Acrobat 8, and yesterday I discovered that I can recreate a lost shared-review PDF by generating a new PDF, and then copying the comment-repository XML files from the original review PDF to the folder belonging to the new review PDF. That was great, but I wanted other staff members to not fiddle with the XML files, so I set that folder (named "meta") to read-only. It was previously shared and set to full-access for everybody.
Today, I found that nobody had access to their shared reviews anymore, so I hastily reset the access to the "meta" folder back to full-access, and I re-shared the "meta" folder for everybody. It isn't helping. No-one can access their shared reviews.
Note: immediately after I recreated that lost PDF, one of the reviewers added several comments and uploaded them to the server, so I know everything was working fine then. I set the "meta" folder to read-only sometime later, and I think that's what caused the problem.
Any ideas?
I've just now tried posting a new shared-review PDF, but this time I created a new shared-review folder location, pointing to the exact same actual network folder. The only thing different between the two connections is the descriptive names attached to the connections, which appear in the drop-down list of locations. The original connection's descriptive name is "Acrobat Server" (named by one of my colleagues) and the new one I left unchanged from the default descriptive name "My Network Folder". This new shared-review PDF works fine, so I know that access to the "meta" folder is fine, but how can I fix the older review PDFs?
A workaround for my problem is therefore to re-post all the currently active shared-review PDFs, using the "My Network Folder" connection, and then copy the XML files to the new PDF. I just tried it, and it works, but that's only a practical workaround to fix the 10 to 15 recently posted review PDFs, and it'll only work if people still have the original PDFs they posted. All the older review PDFs will still be read-only.
Also, does anyone know how to remove a folder location so that only the one that works appears in the drop-down list?
Updates:
1) The above workaround only works for me. Other reviewers still cannot access the new PDF. So I don't have a valid workaround after all.
2) One more thing: if I try to post a new PDF using the old location "Acrobat Server", it fails at the step where it tries to create the XML file and folder.
3) Earlier, I also tried creating a new shared-review folder location in another directory, and I noticed that the metadata folder was not shared. So maybe I don't need to share the "meta" folder after all, and maybe something changed in our corporate network overnight?

Thank you for your answer.
I have narrowed my problem down to a connectivity problem with the comment server. We have Acrobat 8 installed on a machine named "acrobat". On the acrobat machine, the shared-review PDFs are stored in a folder named "documents". Each member of our team has a subfolder within the documents folder. i.e. this structure:
documents
     john
     jane
     david
     amy
The comment server XML files are stored in a folder named "meta", at the same level as the above name folders:
documents
     john
     jane
     david
     amy
     meta
When we send documentation out for review, we send reviewers a link something like "\\acrobat\john\123_review.pdf". Reviewers are able to open the PDF, but they get an error message saying "Adobe Reader cannot connect to the Review Server: acrobat".
I believe that the message means that Reader is not able to find the comment server in the "meta" folder. But the meta folder is definitely there, and is write-accessible for everyone. Any user on our network is able to manually open the meta folder, create a new file inside the folder, edit and save that file, delete the file, etc.
These pdfs that no longer work, always used to work. I had changed permissions on the meta folder, but after people reported connectivity problems, I changed the permissions back to full control for all users, and even added more users with full control, but people still can't connect. What I need is to find out where these PDFs are looking for the comment server. It looks like they're looking in the correct place: the acrobat machine, but maybe inside the PDFs, the comment server location is stored in a certain way.
Another thing: when anybody tries to initiate a shared review, the process fails at the point where Acrobat 8 tries to create a comment server folder. The person who set up Acrobat 8 for us also defined the shared-review location for us (a drop-down box containing all locations appears in the first or second screen of the dialog box when you initiate a shared review. Only one location appears for us: the location defined by that person, and it's named "acrobat server"). But I don't know how to find out what that shared-review location is. Acrobat 8 lets you remove a location, but doesn't let you edit it. If I could see what the location is, I could see if the path is somehow defined irregularly. e.g. without the fully qualified domain name or something like that.
I subsequently added another location, "my network folder", and pointed it to the same meta folder. The "my network folder" location works for me. I can post a shared review, and it connects to the comment server properly. But this works only for me: when other users open that same shared review pdf, they get the "cannot connect" error message above. Again, if I could see explicitly how "my network folder" is saved in Acrobat, and also see how the PDF file has stored that location, I could see if there's a mismatch.

Error on setup failover cluster with Windows 2008 R2 enterprise and SQL Server 2008 R2 (also with SP1)

Hi!
The setup process fails with this error:
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
I have found some hints by google, but nothing really helpfull.
Has anyone had a simular problem when installing SQL server 2008 R2?
All posts I found are about sql server 2008 (no R2!).
The cluster itself is working (storage, network, msdtc, quorum...).
Any hints?
Andreas
Here is the complete log:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2067791871
Exit facility code: 1216
Exit error code: 1
Exit message: Failed: see details below
Start time: 2012-04-06 11:23:57
End time: 2012-04-06 12:01:21
Requested action: InstallFailoverCluster
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x625969A3%400x294A9FD9
Cluster properties:
Machine name: OC-SQLCL02ND01
Product Instance Instance ID
Feature Language
Edition Version Clustered
Machine name: OC-SQLCL02ND02
Product Instance Instance ID
Feature Language
Edition Version Clustered
Machine Properties:
Machine name: OC-SQLCL02ND01
Machine processor count: 32
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: G:\x64\setup\
Installation edition: STANDARD
Slipstream: True
SP Level 1
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: MANAGEMENT\sqladmin
AGTSVCPASSWORD: *****
ASBACKUPDIR: S:\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: S:\OLAP\Config
ASDATADIR: S:\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: S:\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: MANAGEMENT\sqladmin
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: MANAGEMENT\administrator
ASTEMPDIR: S:\OLAP\Temp
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\ConfigurationFile.ini
CUSOURCE:
ENU: True
ERRORREPORTING: False
FAILOVERCLUSTERDISKS: Cluster Disk 3,Cluster Disk 4,Cluster Disk 5
FAILOVERCLUSTERGROUP: SQL Server (MSSQLSERVER)
FAILOVERCLUSTERIPADDRESSES: IPv4;172.29.2.122;Cluster Network 2;255.255.255.0,IPv4;172.29.3.122;Cluster Network 3;255.255.255.0
FAILOVERCLUSTERNETWORKNAME: CLUSTER02
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: S:\
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
PASSPHRASE: *****
PCUSOURCE: d:\install\mssql\sp1
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: MANAGEMENT\sqladmin
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLDOMAINGROUP: <empty>
SQLSVCACCOUNT: MANAGEMENT\sqladmin
SQLSVCPASSWORD: *****
SQLSYSADMINACCOUNTS: MANAGEMENT\administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: L:\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQLUSERDBDIR: T:\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQLUSERDBLOGDIR: L:\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQMREPORTING: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x1C2074D8@1216@1
Configuration error description: There was an error setting private property 'VirtualServerName' to value 'CLUSTER02' for resource 'SQL Server'. Error: Value does not fall within the expected range.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120406_112205\SystemConfigurationCheck_Report.htm

Hi Andreas Plachy,
Please make sure that the Virtual Server Name ‘CLUSTER02’ is unique on the network. In addition, are there any resources named ‘SQL Server’ on the Windows cluster? If that is the case, you may need to rename the related resources to avoid conflicting with
SQL Server, and try again.
Stephanie Lv
TechNet Community Support

Logical naming of server

Similar Messages

Maybe you are looking for