Login App Failure

What is going on with Verizon support. You have multiple requests for assistance in login into "Watch ESPN" app and you provide no answer. Is this a scam that makes a claim but does not have support from Verizon? Does the connect work or not. Why don't you provide a solution?
Message was moved to a new discussion for better exposure by: Verizon Moderator<<>>

    BoostHungry and labrew, I want you to be able to access your NFL Mobile app as well! I checked and the Motorola Xoom is supported for NFL Mobile. I can definitely understand how frustrating this must be and I’m here to help! Let’s get to the bottom of this.
You mentioned that you have made sure that the My Verizon user name and password are correct and you’re able to sign in to My Verizon. Have you ever been able to use the NFL mobile app of your Xoom? If so, when was the last time? Are you using a WiFi connection on the Xoom when trying to access the NFL mobile App or do you have a data plan for the device?
Try uninstalling and reinstalling the App and retest. If you are still unable to sign in post back for further assistance. We may need to file a trouble ticket for this issue.
John B
Follow us on Twitter @VZWSupport

Similar Messages

  • What is Apple doing to fix iPhone app failure

    This problem looks like a bad MS conflict error... One of the biggest reasons I got away from PC.
    I have a new (now 4 days old as of this posting) 3G iPhone with all updates. It has been registered with Apple and synced with my iTunes. I have loaded free apps on my iPhone with the reasoning being that if the free apps don't work, I surly will not buy an app from the designer of a non working free app.
    I have done the reset and reboot, which "some" of the apps did work fine. But all, non standard iPhone apps, crash on startup following a sync section with iTunes.
    Without claiming to be a programer or even a technician, it appears that the cause of the down loaded app failure stems from the sync with iTunes and maybe poor app design. Anyone from the PC world will recognize this as a "conflict error".
    At the iPhone introduction Keynote address, I feel Steve Jobs lead me to believe that is would not happen with the 3rd party development of apps. It's just not the "Apple" way. I maybe wrong in that it is not an actual "conflict error" but something else, still, it is not what I have come to expect from Apple and hope that this problem is not a sign of the future with Apple. It also appears that better "quality assurance" is needed with app development and iPhone syncing.
    My question is:
    What, if anything, is Apple doing to solve this massive problem with downloaded apps and the iPhone and syncing with iTunes?
    If someone could show me a link with an Apple reply to solving this problem besides reset/reboot/reload I would be a little more confident in knowing that I didn't waste good money and "TIME" in getting the iPhone.
    This boot-reboot, reset, wipe it clean approach is not good, to much like living in the MS world, not Apple.

    Going to the local Apple store this morning...
    My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
    I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
    IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
    The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

  • Can not login app id

    Aftet i update to ios5.1 when i login app id they said " this is not a test user please creat new in sandbox enviroment." what should i do because i don't want to change to other id.

    http://www.apple.com/support/mac/app-store/contact/

  • Restore default settings after using "Desktop 2 Login" app?

    Hi all!
    Downloaded the Desktop 2 Login app here:
    http://www.apple.com/downloads/macosx/icons_screensavers/desktop2login.html
    How do I restore the default settings after having run this?
    Thanks in advance!

    Anyone?

  • When login Apps, get APP-FND--01926: The custom event WHEN-LOGON-CHANGED ra

    When login Apps, get APP-FND--01926: The custom event WHEN-LOGON-CHANGED raised unhandled exception: ORA-01403: no data found
    Applied patch
    6241631 11i.ATG_PF.H.delta.7 (RUP 7) and it's pre-requisite patches
    Forms can not be launched successfully.
    APP-FND--01926: The custom event WHEN-LOGON-CHANGED raised unhandled exception: ORA-01403: no data found
    Followed
    Note 391243.1: Unable to access forms - getting APP-FND-01926 error (Doc ID 391243.1)
    Note 555409.1: Client Gets App-Fnd-01926 Every Time After Bounce Apps 11i Forms Service (Doc ID 555409.1)
    these two notes, can not solve the issue.
    Executed following action plans:
    1. Backup custom.pll file on your issued instance(DEV instance).
    2. Copy a custom.pll files from a working environments(i.e. PROD instance) to this issued instance(DEV instance).
    3. Compile the new copied Library CUSTOM.pll manually by running the command:
    f60gen module=CUSTOM.pll userid=APPS/APPS output_file=$AU_TOP/resource/CUSTOM.plx module_type=library batch=no compile_all=special4. The $FORMS60_PATH needs to be in sync with the the Context.xml specifically the s_f60path variable
    i.e >/oracle/apps/test10appl/au/11.5.0/resource:/oracle/apps/test10appl/au/11.5.0/resource/stub</FORMS60_PATH>
    5. Run Autoconfig instantiate the changes.
    Issue still exists.
    Please HELP~~
    Thanks,
    Jackie

    Hello Srini,
    app11i@hpfsapp2> ls -ltra CUSTOM
    -rwxr-xr-x 1 app11i dba 24576 Aug 29 2001 TMCUSTOM.pll
    -rwxr-xr-x 1 app11i dba 20480 Mar 8 2006 CUSTOM.pll.backup
    -rwxr-xr-x 1 app11i dba 24576 Feb 22 2007 CUSTOM.pll.20120215
    -rwxr-xr-x 1 app11i dba 32768 Oct 4 2007 CHRM_CUSTOM.plx
    -rw-r--r-- 1 app11i dba 36864 Oct 8 2007 CHRM_CUSTOM.pll
    -rwxr-xr-x 1 app11i dba 20480 Feb 14 15:20 TMCUSTOM.plx
    -rw-r--r-- 1 app11i dba 24576 Feb 15 09:22 CUSTOM.pll
    -rwxr-xr-x 1 app11i dba 16384 Feb 15 09:23 CUSTOM.plx
    I don't quite understand "only one copy of CUSTOM.plx in the PATH directories", what is PATH directories? How to check? You mean environment variable?
    EBS version: 11.5.10.2
    DB version: 9.2.0.8
    OS: Linux x86
    Thanks,
    Jackie

  • My friend purchased the I phone 4s in US, Now iam using it in india. I cant able to login App Store without Credit Card

    My friend purchased the I phone 4s in US, Now iam using it in india. I cant able to login App Store without Credit Card

    If you plan on buying anything from the App Store, you need to register a credit card with your Apple ID.
    This has nothing to do with your iPhone.

  • Login on-failure not generating traps

    I Currently have a 4507 switch running 122-25.EWA4.  I have enabled the login on-failure command for syslog and traps.  When a failed login occurs I see it in the syslog just fine but I never see a trap generated.  I know traps are working for other commands on the switch (ie running config viewed).
    login on-failure
    login on-success log
    switch#show login 
         A default login delay of 1 seconds is applied.
         Quiet-Mode access list 25 is applied.
         All successful login is logged.
         All failed login is logged and generate SNMP traps.
         Router enabled to watch for login Attacks.
         If more than 5 login failures occur in 30 seconds or less,
         logins will be disabled for 120 seconds.
         Router presently in Normal-Mode.
         Current Watch Window remaining time 21 seconds.
         Present login failure count 0.
    278250: May 14 16:33:15.602: %SEC_LOGIN-4-LOGIN_FAILED: Login failed [user: JoeUser] [Source: 192.168.1.1] [localport: 22] [Reason: Login Authentication Failed] at 16:33:15 East_US Mon May
    snmp-server community <snip> RW 10
    snmp-server community <snip> RO 11
    snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
    snmp-server enable traps tty
    snmp-server enable traps vtp
    snmp-server enable traps vlancreate
    snmp-server enable traps vlandelete
    snmp-server enable traps port-security
    snmp-server enable traps config
    snmp-server enable traps syslog
    snmp-server enable traps envmon fan shutdown supply temperature status
    snmp-server enable traps vlan-membership
    snmp-server host <snip>

    Hi yjdabear,  Thank you for your replies. I do have logging history set to level 4.  I am still not seeing traps generated even using the 'syslog method' for the login failures.  here is a snipit of my logging
    Syslog logging: enabled (0 messages dropped, 1102 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
    Console logging: level debugging, 277317 messages logged, xml disabled,
    filtering disabled
    Monitor logging: level debugging, 139 messages logged, xml disabled,
    filtering disabled
    Buffer logging: level debugging, 278418 messages logged, xml disabled,
    filtering disabled
    Exception Logging: size (8192 bytes)
    Count and timestamp logging messages: disabled
    Trap logging: level debugging, 278388 message lines logged
    Logging to , 278388 message lines logged, xml disabled,
    filtering disabled
    switch#show logging history
    Syslog History Table:1 maximum table entries,
    saving level warnings or higher
    4417 messages ignored, 0 dropped, 0 recursion drops
    273892 table entries flushed
    SNMP notifications enabled, 52 notifications sent
    entry number 273893 : LINK-3-UPDOWN
    Interface GigabitEthernet7/19, changed state to up
    timestamp: 883868674

  • CC login app installed on 10/29/13 without my knowledge, how is that?

    I don't subscribe to CC, how did the login app get installed?  It appears in my system tray and is apparently being loaded every time I start my PC.
    Thanks

    Someone else has access to your Apple ID and is purchasing them. And you have autoload activated to they are also downloading to your iPhone. Log onto to your account from your computer and check your purchase history.

  • Is there a way to open login apps in separate desktops without the screen switching between them?

    When I login, I open several apps on desktop 1, and several apps on desktop 2. However, the Mac switches to Desktop 2 a few seconds after I login, as the applications open there. Is there a way to prevent the screen from moving during login?

    Strange, it's working fine now. Nevermind.

  • 10.4.7 update trouble Looping on Login App

    Hi All Last night I set all the computers at my company to update to 10.4.7, via the downloaded combo updater. All the computers are fine save for one.
    On this computer it will not finish booting.
    so far I have
    Run disk repair and premissions repair from the disk utility via install disk.
    run fsck via single user mode
    attempted to boot in safe mode
    When I turn on verbose mode for the start up the boot process seems to be looping on
    /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    over and over again I've let it run for up to 30 mins like this before restarting by holding the power buttong for 4 sec
    Just wanted to know if there is anything I can do or if I should just reinstall tiger and than update again.

    Can you mount the drive from another computer via FireWire Target Disk Mode? then repair the drive; delete cache folders etc.
    From single user mode you could also try to rename
    ~/Library/Preferences to another name.
    MacFixit: Repairing Permissions
    General Troubleshooting permissions
    Troubleshooting Mac OS X
    Insufficient disk space or RAM
    Installing Software Update
    Advice on Archive & Install

  • Can't login App Store

    I have the same problem that other people:
    " The Apple ID you entered couldn't be found or your password was incorrect. Please try again."
    The problem is in iphone, pc no problem, web no proble, itunes no problem. I restores iphone, get app in itunes, sync, and the first moment all ok, but after 5 minuts can't login again.
    Thanks

    I still like the time I can not access the store, for more than a week. I have no jailbreak, or Catalan, or any other modificion. The iPhone is such i as I did in movistar. Anyone know why? Store can be problem?? I created three different id but I still happening exactly the same. I've restored 5 times the iphone, itunes 5 times and five times the windows xp. Already rule out that the problem is mine, I think will be the Store, but of course anyone says anything!
    In Spanish:
    De momento sigo igual, no puedo acceder al store, desde hace mas de una semana. No tengo ni jailbreak, ni catalan, ni ninguna otra modificion. El iphone esta tal i como me lo dieron en movistar. Alguien sabe por que?? Puede ser problema del Store??? He creado 3 id diferentes pero me sigue pasando exactamente lo mismo. He restaurado 5 veces el iphone, 5 veces el itunes y 5 veces el windows xp. Ya descarto que sea mio el problema, creo que sera del Store, pero claro cualquiera les dice algo!!!
    Message was edited by: jguasch

  • No Internet Connection Before Login Apps Launch

    I have exhausted every known procedure to try and get an internet connection before my login items (Mail App & iChat) launch.
    I didn't have this problem with my G5 w/Mac OSX 10.4.8. At startup I could watch the blue screen and startup progress bar. During the process I got an "Establishing Network Connection" message (or something similar) and then the computer would continue to boot. Mail and iChat would launch and my mail would be retrieved and I chat would become available.
    On the Pro Mac I get no notification at all on what's happening. It boots normally, Mail and iChat startup and I get a dialog box that says I'm not connected to the internet.
    Within a few seconds I can hit the 'get mail' icon and mail is then retrieved, I also have to select a "Available" from iChat to log on.
    The problem is that the internet connection is not recognized until the boot process is completed.
    Side note: At startup I get the gray screen with the Apple logo for about fifteen seconds, the screen flashes to blue and for a fraction of a second a dialog box pops-up and says "Starting Mac OS X" before my desktop appears with all my login items open. On my G5 it use to say "establishing network connection" or something similar.
    I suspect this has something to do with my problem.
    System Info:
    Mac OSX 10.4.8
    Machine Name: Mac Pro
    Machine Model: MacPro1,1
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Number Of Processors: 2
    Total Number Of Cores: 4
    L2 Cache (per processor): 4 MB
    Memory: 2 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP11.005C.B04
    SMC Version: 1.7f8
    Network Configuration:
    Location: Automatic
    Network Port Configuration: Checked only Built-in Ethernet 1 - currently active and at the top of the list.
    Built-In Ethernet:
    TCP-IP Using DHCP. IP Address, Subnet Mask and Router all connected.
    I have IPv6 Address turned off. Problem persists regardless of whether this is on or off.
    I have a valid ethernet ID and is configured automatically.
    I have not modified any other setting.
    My cable modem is connected directly to the ethernet port. It's the same modem I used with the G5.
    I have discussed this with Apple's Tech Support on two occasions and they couldn't come up with a solution.
    Before I call for an appointment with my local Mac Store for a diagnostic test, I would like to hear from anyone who has had a similar problem or can provide a solution.
    Thanks
    Don Jusiak

    Here's a theory: the Mac Pro starts up much faster than an older computer and therefore applications and system are loaded before the network has finished initializing. So perhaps that is all there is to it?
    I'm not at home right now (and therefore no access to my Mac Pro) but I will add some network-aware programs to my login and see what happens and report back.
    The suggestion to turn off automatic login is probably a good one as this will give the system more time to get the network up before apps launch.
    Alternatively, there is a program called "Lingon" that you can use to re-order the system startup items. This might be useful in changing the priority of the network/dhcp status. Again, I will look in to it at home and report back.

  • IPhone login App to log into webapp

    Hi everyone,
    I'm trying to build an app that will act as a login screen to a current iphone webapp. I want the app mainly to be a login screen (with other functions tbd later) that when the user logs in, the information is passed to a webapp, bringing up a UIWebView with the webapp having already logged in the user.
    Problem I'm having is I'm not sure how to link the app portion to the webapp portion, to pass the user's login name and password to the website as I bring it up in WebView. I have an inkling its somewhere in URLrequest, but I'm having trouble finding it.
    Any help would be greatly appreciated! Thank you!

    Hi,
    I'm sorry I can't provide more details, but I'm also in the very early stages of putting the app together. I unfortunately can't provide code because...well I guess I don't have very much haha. I guess I'm mainly wondering if this is possible. All I have so far is very simple, just a single UIWebView that brings up a webpage.
    Just wondering if anyone has any idea if this is possible?

  • An account failed to log on unknown username or password. Causing Login audit failures

    I have a SBS11 Essentials server that is getting audit Failures over and over again. There computer account says it's the SBS11 server it's self.  It says unknown user name or bad password. I have checked for scheduled tasks, backup jobs, services and
    non of them are using any special user accounts.  I have used MS network monitor and can't find anything helpful to lead to the issue.  All computers in the network are running Windows 7.  The domain functional level is 2008 R2.
    I get a the 4768 event ID about a Kerberos event and then just after I get a Event ID 4625 account failure with Logon Type 3.  I have includes the events below.  I need to figure what is causing the audit failures as my GFI Test Hacker alert is
    catching it every morning.  Disabling the Test Hacker alert is not a option.  I have used Process Explorer also but can't seem to pin it down.  I also enabled Kerberos logging.
    http://support.microsoft.com/kb/262177?wa=wsignin1.0.  All event codes state its a unknown or no existing account but how do I stop it from happening?
    This is from the System Event log
    A Kerberos Error Message was received:
    on logon session TH.LOCAL\thsbs11e$
    Client Time:
    Server Time: 14:59:53.0000 3/4/2014 Z
    Error Code: 0x6 KDC_ERR_C_PRINCIPAL_UNKNOWN
    Extended Error:
    Client Realm:
    Client Name:
    Server Realm: TH.LOCAL
    Server Name: krbtgt/TH.LOCAL
    Target Name: krbtgt/[email protected]
    Error Text:
    File: e
    Line: 9fe
    Error Data is in record data.
    This is from the Security Event log
    A Kerberos authentication ticket (TGT) was requested.
    Account Information:
    Account Name: S-1-5-21-687067891-4024245798-968362083-1000
    Supplied Realm Name: TH.LOCAL
    User ID: NULL SID
    Service Information:
    Service Name: krbtgt/TH.LOCAL
    Service ID: NULL SID
    Network Information:
    Client Address: ::1
    Client Port: 0
    Additional Information:
    Ticket Options: 0x40810010
    Result Code: 0x6
    Ticket Encryption Type: 0xffffffff
    Pre-Authentication Type: -
    Certificate Information:
    Certificate Issuer Name:
    Certificate Serial Number:
    Certificate Thumbprint:
    Certificate information is only provided if a certificate was used for pre-authentication.
    Pre-authentication types, ticket options, encryption types and result codes are defined in RFC 4120.
    I then get teh following error in the next event
    An account failed to log on.
    Subject:
    Security ID: SYSTEM
    Account Name: THSBS11E$
    Account Domain: TH
    Logon ID: 0x3e7
    Logon Type: 3
    Account For Which Logon Failed:
    Security ID: NULL SID
    Account Name:
    Account Domain:
    Failure Information:
    Failure Reason: Unknown user name or bad password.
    Status: 0xc000006d
    Sub Status: 0xc0000064
    Process Information:
    Caller Process ID: 0x25c
    Caller Process Name: C:\Windows\System32\lsass.exe
    Network Information:
    Workstation Name: THSBS11E
    Source Network Address: -
    Source Port: -
    Detailed Authentication Information:
    Logon Process: Schannel
    Authentication Package: Kerberos
    Transited Services: -
    Package Name (NTLM only): -
    Key Length: 0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
    - Transited services indicate which intermediate services have participated in this logon request.
    - Package name indicates which sub-protocol was used among the NTLM protocols.
    - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.

    Well I opened the case for him and he never followed up with Microsoft :-(
    It's a kerberos issue, we're told to ignore it.  Would you be willing to be patient and stubborn and work with CSS to at least understand what's going on better?  I can tell you it's normal with Essentials but not the exact technical reason it's
    happening.
    Unfortunately TechNet isn't coming back, sorry folks :-(

  • App failure after OS upgrade- support options? PSE-6 Prem-4

    I use Adobe Photoshop Elements 6.0 and it's companion video app, Adobe Premiere 4.0, and I run MS Vista HP.
    I recently updated my operating system to Service Pack 2 (SP2). When the upgrade was installed, as usual there were many glitches that needed tweaking, but the worst was my Adobe apps. Both of the above named apps, came back with the same error "cannot start, reinstall program".
    After the initial error message, future attempts to start either app were not answered. Nothing happened. Reviewing the status in Task Manager showed that the apps were both running, but neither was actually visible or operating, just eating memory while standing idle.
    After reviewing the forums and knowledge bases and finding nothing on this problem, I contacted Adobe Support via Chat (the only method available) and after a long drawn out process of locating my registrations for these apps, I was told that I had  to back to  the original retailer where I bought them, several years before. The only other option was of course to BUY the latest versions from Adobe. Even if I had any recollection of where i bought it, I can only imagine how that conversation would go! The original disks were 'somewhere' but I just moved and lord only knows where they were put until all is unpacked! One would think if one had the serial numbers, that downloads or better yet, repair files, would be available to registered users, but NO!
    My original software worked fine, so no reason to spend more money in this economy, I just needed to get them working to finish a project with a deadline rapidly approaching. As I was working with PSD files, no other application would help me finish my project, so I had to get something. Perusing the Adobe website I found the trial versions of Adobe PSE 8.0 and Premiere 6.0! Great, I thought, this should work to finish my project and hopefully I would find my original software before the expiration date of the trial software!
    With ever faithful 'Murphy' standing by for the install, I got the message "Trial period expired. Please enter serial number". This happened with both apps, and the only thing I could figure s that I probably downloaded these before and there was some embedded snitch file that would not allow me to run it again. But... Murphy must have gone out for coffee, because in a moment of inspiration, I went back to my original apps and clicked on the icons... You guessed it, both apps were restored to full operation!
    So this is why I am writing this to the forum. I found a fix that Adobe either does not know, or won't tell. Whatever files went missing or corrupted during my upgrade were re-installed into the Adobe 'common' folder, restoring my original apps. If these files could be identified by Adobe techs, they could be made available for download to repair these issues without the run-around, and without making customers spend more money, the mark of a reputable software manufacturer.
    The only thing I do  not know for sure, and until I find my original disks I do not intent to investigate, is whether or not the original apps will continue to function if I uninstall the trial versions to get my disk space back,s they do not work and only take up space. I will investigate the Adobe folders and see if I can identify which files were installed with the trials, and if they may be affected by an uninstall. Sometimes the uninstaller apps are intuitive enough to know that certain files are in use by another application,and will not be included in the uninstall. But I am not going to test this theory until find my original disks!
    Please pass this info on to your friends who use MS Vista and PSE 6.0 & Prem 4.0

    It's Ok.
    Now I have:
    $ cat /etc/issue
    Oracle Linux Server release 6.4
    No any problem.

Maybe you are looking for