Login Error Help ORA-28007: the password can not be reused

Hi,
I have a problem
Users can not connect to an Apex application. They are associated with a profile that uses a function to verify the password complexity.
They get:
ORA-28007: the password can not be reused ORA-06512: at "APEX_030200.WWV_FLOW_SECURITY", line 248 ORA-06512: at "SYS.WWV_FLOW_VAL", line 55 ORA-06521: PL / SQL: Error mapping function
Error ERR-10480 Unable to run authentication credential check function.
Oracle Apex is installed in Oracle 9i ...
Any suggestions?
Thanks

782150 wrote:
SQL> select profile from dba_users where username = 'xxxxxx';
PROFILE
DEFAULTIf you get this i think your default profile was changed.Try following
1.Connect through sqlplus and alter system set resource_limit = false then change password again.
2.Also post there
select LIMIT from dba_profiles where RESOURCE_NAME in ('PASSWORD_REUSE_MAX','PASSWORD_REUSE_TIME')
if you get different than DEFAULT then
alter profile default limit PASSWORD_REUSE_MAX default PASSWORD_REUSE_TIME default
then try change password again

Similar Messages

ORA-28007: the password cannot be reused

Anytime I try and login with a user that has password verification profile I receive:
ORA-28007: the password cannot be reused
Please tell me that ApEx 2.2 did not actually just implement the 'change password' and see if the hashes match for the built in DB Authentication.

In hindsight, perhaps we should have mentioned in the Release Notes that when this new authentication scheme is used in post-2.0 applications, the underlying mechanism used for password verification is database version dependent, explaining potential drawbacks of the pre-10.2.0.3 method. Then developers would have better information about the new authentication scheme type and could decide if it was right for them. They would also be able to decide whether importing post-2.0 applications that used this authentication scheme from a 10.2.0.3 database into a post-2.0 Application Express instance on a pre-10.2.0.3 database would be the right choice given the same potential issues. However, this technique, like it or not, is used as a workaround to the absence of exposed password verification methods in earlier server versions and has been used for many years in production systems, including large-scale HTML DB deployments, from well before this new authentication scheme was exposed for use as such, but where developers implemented the method themselves as components of their authentication architecture.
In short, I think your objection to the method on technical grounds (citing known pitfalls) is valid but I think you're saying that anyone who's ever used the method in any application technology in a production system ought to have found a better alternative. Maybe you're right.
Scott

When I try to install Firefox 3.6.12, I get a 7-Zip error message telling me the system can not find the path specified. How do I rectify this?

I downloaded the Firefox Setup 3.6.12 from the Firefox website. After I run the install. It extracts, then I get the error message.

Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* Delete the files and folders in the %temp% folder.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Http to RFC [http adapter issue] - The system can not locate the resource.

Hi,
When I post the message with http client, I am getting the below error.
Line 33: The system can not locate the resource specified.
i.e --> xhttp.send (payload);
It is a java script error.
Result URL:
http://xxx.xxx.xxx.xxx:8000/sap/xi/adapter_plain?namespace=http%3A//www.cisco.com/httptobapi&interface=MI_request_response_cisco&service=BS_HTTP_CISCO&party=&agency=&scheme=&QOS=BE&sap-user=xxxxX&sap-password=xxxx&sap-client=500&sap-language=EN
Any idea what went wrong?
Thanks
Balaji

hi,
I have given all the details correct.
Server Host,Port, Client, Sender Service, Interface and namespace and then payload.
It looks like problem is with http client. It is not posting the data correctly.
I tried on 2 different systems.
On one system it gave a problem at line 33 which i mentioned at the first post.
And second system gave line: 27 Permission denied.
Line 27 : xhttp.open ("POST", reqString, false);
Payload:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_request_sales_cisco xmlns:ns0="http://www.cisco.com/httptobapi">
<Customer_Number>1002</Customer_Number>
<Sales_Organization>1000</Sales_Organization>
</ns0:MT_request_sales_cisco>
Thanks
Balaji

I can't login from the desktop app - "Login error. Please contact the Admin."

1) Does anyone have the same problem as described below?
2) Does anyone know how to fix it?
When I try to "work online" from the desktop app, I get asked to log out of offline, then log into online. When I put in my username and password, it gives me the error "Login error. Please contact the Admin." I've clicked the link "Trouble logging in?" and followed instructions to reset my password, which I successfully reset to a new one. I still get the error.
I have a subscription to Adobe Story Plus and am working offline/online using the desktop app. I haven't logged in to sync my documents in about a month. My account is in good standing (paid 2 weeks ago according to my account transactions screen). I'm now trying to collaborate, so it's important that I be able to sync.
Any help would be greatly appreciated.
Thanks,
John

Hi Rohit,
Thanks for your response. I've resolved the problem myself, and you may be
interested to know how in case it happens again with another user - I
thought maybe it was a versioning discrepancy and I was right (I assume).
However, I couldn't update my desktop software (or I couldn't figure out
how to update it) until I rebooted my machine, then Story went into an
auto-update sequence.
After it updated, it logged in and sync'd just fine. Classic "help"
question where the answer basically was: reboot. I shouldn't tried that
before I posted!
I hope that helps.
Thanks,
John
On Mon, Jun 16, 2014 at 3:02 PM, Rohit (Story Team) <

HT1414 I am trying to restore my Ipod touch 5 generation but I am receiving an error message that says your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no

am trying to restore my Ipod touch 5 generation but I am receiving an error message that says your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no luck till now

If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

Error : 'The Connection can not be used to perform thsi operation

Dear All,
I am getting an error like 'The Connection can not be used to perform thsi operation, it is either close or Invalid in this context.
Below is the code what am using:
Sub Select_Query()
Dim SQL_String As String
Dim rs As ADODB.Recordset 'This holds the data
Dim cn As ADODB.Connection 'Declaring Connection
Dim cmdobj As ADODB.Command 'Declare command Object
'Sheets("Payment").Select
Set cn = New ADODB.Connection
cn.Open ("Provider=MSDAORA;Data Source=MyDatabase;User ID=Prasad; Password=Prasad12;")
Dim count_value As Long
count_value = WorksheetFunction.CountA(Worksheets("Payments").Range("A:A"))
For i = 4 To count_value
SQL_String = Worksheets("Payments").Range("AA" & i).Value
Set rs = New ADODB.Recordset
rs.CursorLocation = adUseClient
rs.Open SQL_String, cn, adOpenForwardOnly, adLockOptimistic, adCmdText
Dim val As Integer
val = rs.recordCount
If val = 0 Then
Worksheets("Payments").Range("AZ" & i).Value = "No"
'Else
'Worksheets("Uploaded").Range("O" & i).Value = "Yes"
End If
cn.Close
Set con = Nothing
Next
'cn.Execute SQL_String
'con.Close
Set con = Nothing
End Sub
And select statment is picking one of the sheets, and SQL query is:
="SELECT sa.acct_id
FROM ci_sa sa, ci_sp sp, ci_sa_sp ss, ci_sp_geo spg,ci_acct_char cac
WHERE sa.sa_id = ss.sa_id
AND ss.sp_id = sp.sp_id
AND sp.sp_id = spg.sp_id
AND spg.geo_type_cd LIKE '%RR%'
AND spg.geo_val ='"&B4&"'
and sa.ACCT_ID=cac.ACCT_ID
AND cac.char_type_cd LIKE '%SDO%'
AND TRIM (char_val) IN ('"&Master!G9&"')"
Please help me in this..
Regards,
Prasad

Please, this is a Oracle forum, not a VBA forum. Mark this thread as answered and post it in a VBA forum.

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Photoshop CC 2014 - The file can not be saved in path because an error has occurred

Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
Michael

Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

I am trying to restore a backup onto my iphone from itunes but it asked me for a backup password which I cant remember, is there anyway that I can reset the password and not lose my backup?

I am trying to restore a backup onto my iphone from itunes on a pc windows 8 but it asked me for a backup password which I cant remember, is there anyway that I can reset the password and not lose my backup? Any help is very appreciated

Try entering the password on your iPhone

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build"

When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?

I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11 itunes v. 9.0 and I just want it to be restored. I need help. Oh and its an 8 gb ipod touch.

HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)? That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both? Or more?
I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details. The BT email client set-up starts here.

V32 iOS 8 Error: The library can not be updated

Hi,
our customers have this error message after open an app v32:
Knihovnu nelze aktualizovat
Došlo k chybě
in english: The library can not be updated
An error has occurred
This error is only when iPad is setup to czech language.
When we setup to english language, app is open normally...
And then is app open normally in czech language too.
Any help pls?
Thank you
Tomas
P.S. v32 was made and send to App Store 22. 9. 2014

I did a search on Google for Error -39, and it suggests 2 things. Installing the latest version (which is sounds like you have) and turning OFF web accelerators if there are any running...
http://docs.info.apple.com/article.html?artnum=44000

Login Error Help ORA-28007: the password can not be reused

Similar Messages

Maybe you are looking for