Login screen before the actual application in an applet.

Hi all,
I'm really looking for a tutorial or something but I haven't managed to get the wording right in my google searches.
I have an applet that is communicating with a server. Before getting access to the applet as such I would like a login screen. This is not there for the purposes of security but rather which server to work against.
I'm having a bit of problem with the GUI - what would be the best way of doing this?
When you hit the webpage and the applet loads there will be 3 test fields and 3 input boxes - one being a password box. and finally a OK button.
The OK button will call a function I already have that will verify that the credentials are OK and pass back a yay or nay - if I get a nay I want to stay on the login page.
If I get a yay - and this is where I don't know what to do. I want a complete GUI redraw of the new components.
I have tried to put all components into the one window and hide-and-show them as required but this just turns into a complete mess. I have the second window already - and I'm quite happy with it so I really want a brand new login window and switch from one to the other without having to resort to the messy hack I'm currently using.
I'm sure I'm missing something pretty basic here so if someone could please guide me towards a tutorial I'd appreciate it.
thanks,
Dan

That's exactly what I was looking for.
thanks!

Similar Messages

I am 19 days from my contract needing to be renewed and I broke my screen. How far in advance can you renew before the actual renew day?

I am 19 days from my contract needing to be renewed and I broke my screen. How far in advance can you renew before the actual renew day?

Basically it is on the day your contract ends. However some Verizon wireless corporate store managers can over ride that and update possibly a week early. But its iffy.
Now Verizon will let you upgrade to the Edge program but you have a broken device and they will prey on you since you are desperate for a device. Edge plan is paying full price over 20 months and paying taxes on it up front, you then after paying 60% of the device off can edge up to another device. Now if you pay 60% off at anytime after 30 days you can continue to trade them in for new as much as you want.
Or you can wait it out get a new free device under contract or reduced cost device again under a 2 year contract.
The edge plan is no contract.
Good Luck

After upgrade to Mavericks, a new gray screen appears just before the regular login screen. The new screen appears for a few seconds with several boxes full of unidentifiable figures. How can I remove?

OS X Mavericks Upgrade Issue
Now when I boot my iMac, a new gray screen appears for a few seconds following the Apple screen and just before the login screen. The new screen shows several boxes with unidentifiable figures in them. It has become annoying because it has never appeared before. Anyone know of a way to stop this screen (of garbage) from showing? Thanks…Larry

It's possible that a PRAM reset may solve the problem:
http://support.apple.com/kb/HT1379?viewlocale=en_US&locale=en_US

My PC doesn't see my iPad via iTunes, and I'm getting a message "iPad is disabled / connect to iTunes". How do I get a login screen on the iPad?

My PC doesn't see my iPad via iTunes, and I'm getting a message "iPad is disabled / connect to iTunes". How do I get a login screen on the iPad?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

Blank login screen on the iPad keeps popping up and wifi disconnecting after 20 seconds

hi, we have an ipad running IOS 5 that keeps having a blank login screen on the iPad keeps popping up and wifi disconnecting after 20 seconds.
I am yet to find out why this is, any clues? (note that both apple.com and facebook are blocked at the router, but nothing else)...

actually we cannot due to policy reasons... it appears through testing that the iPad is phoning home and sending private data to Apple regardless, it is also odd they placed these PRIVACY settings in About hidden away so that no-one knows they are there.
From the iPad homescreen, tap on Settings > General > About
Tap on "Diagnostics & Usage" > select "Don't Send"
So... anyone else know why if we block Apple, the iPad disconnects from the internet via Wifi?

While installing a program (MediaCenter.exe) to handle audiobooks from the library, I erroneously associated the download site with Windows Media Player instead of the actual application (NetLibrary Media Center). How can I reverse/change this?

While installing a program (MediaCenter.exe) to handle audiobooks from the library, I erroneously associated the download site with Windows Media Player instead of the actual application (NetLibrary Media Center). How can I reverse/change this? Reinstalling the application does not clear the error, so I'm assuming the association is somewhere in Firefox.

Never mind -- I just found it under Tools/Options.../Applications, where I changed the incorrect association of "nlmcp" from Windows Media Player to the correct one, NetLibrary Media Center. Done!

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

TS3899 Whenever I send an email, the person who receives it gets something that says References: and a long list on nonsense to do with Gmail before the actual message appears.

Whenever I send an email, the person who receives it gets something that says References: and a long list on nonsense to do with Gmail before the actual message appears.
Here is an example....
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <CAM-_T=[email protected]> <BLU0 ,[email protected]> <CAM-_T=CAUP+9GyYG-_ecOazo=[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
> Mime-Version: 1.0 (1.0)
> In-Reply-To: <[email protected]>
> Content-Type: multipart/alternative;
> boundary=Apple-Mail-85351E4C-6385-4256-BE9E-27C10517E136
> Content-Transfer-Encoding: 7bit

It seems pretty clear to me.
When you turn off your primary account the only active account the phone can send via is your Gmail account, and that's what you're seeing.
The question is why do you need to turn off the primary account.. which you answer:
When that is set up as the primary server and turned on I get a message that says "the recipient was rejected by the server
That's because your ISP (megalink) is using access controls to manage who sends mail through their mail server. The first thing they're probably doing is using IP address restrictions - essentially saying they'll only relay mail from any machine on their network (including dialup/DSL/etc. customers), but you're not on their network, you're on an AT&T (or Verizon) 3G connection which isn't in their IP address range, and therefore not valid as far as their mail server is concerned.
The typical solution to this is authentication - by authenticating to their server (via username and password) you identify yourself as a customer and they should relay your messages. So check your phone to ensure that you have authentication enabled for your primary mail account.
If that fails (e.g. they don't support authenticated SMTP) the next option would be to relay the message through your cell provider's mail server - as an AT&T wireless customer you should be able to relay through AT&T's mail server... likewise for Verizon (or whatever national carrier your iPhone is on). You'll need to check with your carrier's site for the specifics of the mail server address to use.

Can NOT cancel/Reverse GI with a date before the actual GI date

Hi
can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
thanks

>
jo jo wrote:
> Hi
>
> can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
> thanks
Hi Jo Jo,
I am not sure if i understand your problem correctly.
As far as my understanding goes you are trying to reverse a GI on a date before Actual goods issue date.
If you have PGId on a date before planned GI date the system will update that date into Actual GI date and not planned GI Date.
For example if you planned GI date was 1st April 2008 and you did PGI on 28th April 2008 Actual GI date will become 28th April 2008.
So if you try to reverse PGI before 28th April you wont be allowed to as you cannot reverse a goods issue that has not happened.
Hope it helps.
Post furthur if i had misunderstood your problem.
Regards
Abhishek

How to post Unplanned Delivery Cost before the actual invoice

Hello Experts
Our client has a scenario when they received the unplanned Delivery cost before the actual invoice of that purchase.
We are handling the Unplanned Delivery cost by entering on the header level on the regular scenario.
Can somebody give there exert thought how we handle the Unplanned Delivery Cost Invoice before the actual Invoice.

Hello,
It is a process issue and I have seen similar situtations. Here is a possible solution.
1. You should estimate the standard freight and put this as part of Material Cost.
    This can be a condition type or it can come from PIR, depending upon how you
    calculate the material cost.
2. At the purchasing level, add a condition type for Freight. So, at the time of GR,
    system will automatically accrue the freight amount. This will be based on the
    esitmated amount and not the actual amount. You can capture the offset
    account in a separate accrued freight payable account.
3. At the time of processing the actual freight invoice, debit the accrued freight
   payable account.
4. On regular basis watch your estimated and actual freight expenses and make
    necessary adjustments.
Hope this helps.

New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect

New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).

Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

A movie clip before the actual DVD menu

Hi there,
Excuse me if this has been discussed earlier and please post a link to that topic so I don't pollute the forum.
I would like to author my wedding DVD, using Premiere Pro CS3 and Encore CS3, with a menu, where before the actual buttons a movie appears that has to be watched before one can select a chapter or fast forward.
You see this in commercial DVDs where a copyright warning has to be read and cant be skipped.
Thanks a lot for the effort.
Cheers,
Omar

TheDoc:
If you simply right click on any timeline in the project window, you will see a list of options for that timeline starting with "Transcode Settings". If you look down that list (about 3/4 the way down) you should see "Set as First Play". Click that and you should notice that a little 'play' button has embedded itself on the timeline icon next to the timeline you just chose.
Secondly, in the properties tab for that timeline there will be a space labeled "Operations: All Permitted." Encore permits all operations on a DVD by default. If you do not want anyone to be able to skip over this intro before the actual menu, click the button that says "Set..." and simply check the box next to "None."
Now, all you have to do is make sure that there are no End Action's, Overrides, or Menu Remote buttons that link back to that First Play and you should be all set.
Tony

Change Login Screen of the Portal

Hi All,
is there a way to change the appearance of the login screen of the portal (change the image etc..)
Thanks, Johannes

I have worked through these documents, too. However, I am facing issues deploying the PAR file to the server. Can you explain how that works?
I have tried it using Export -> PAR file -> Deploy but I keep receiving the error:
Operation failed: Please make sure the server 'SERVERNAME' is running or check the log (sap-plugin.log) for more detail
The server is up and running...
Any ideas?
Thanks, Johannes

How do I add video to play before the actual menu?

I want a warning to pop up before the actual menu and can't figure it out. I just installed DVD Studio Pro today after using iDVD for over a year. Please help me out with some detail! Thank you so much! Also, and this sounds terribly stupid, but how do you add audio to the menu?? Sorry! But thanks!

Hi Alex
Create another menu and put your warning there. Set your "at end" to time out and set your action to the Main Menu. Drag your video and audio assets from the assets to the menu viewer. It helps to read the manual first then ask questions
Good luck...let us know how it goes.

Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??

Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??

computerilliterate52 wrote:
hi all, i hope someone is very computer litterate about java that is i have a dell 2400 pc windows xp 2, well since msn isnt downloading anymore java updates we all have to download a compatible one to our computer i use explorer and i can play www.iwin.com online games, yet when i go on to the msn browswer it wont load the games all i see is it just trying to load and load nothing said and nothing done. what could be wrong it works on ie and not msn browser? i have zone alarm, i have avg spyware tester and spyblaster, but i thought it may of kept me from downloading all this yet it worked on IE please help and i dont have flash player either it wont seem to work any and i mean any help is welcome.i tried to change the browser settings and did all that stuff i am on broadband DSL and they dont seem to know they say that isnt there job its msn's so i asked them and they said no it is quest broadband since i am with them i just get the run around i have IE 6.0 ihave java plug in 1.4.2. o3 yet it says not verified, i have java 1.6.o o1 i have java plugin 1.6.0 01 i have that twice ? dont know why. and java envirinmemet i have the right stuff cuz like i said it plays or works on explorer not msn browserer bar. i see no picture's in center of the page as it tries to load it is a blank page any help thank you i have been trying going on 3 weeks now thanksI agree with the other posters; try Firefox. It sounds like a bit of a mess and what you may need is an onsite PC tech to do some maintenance on your PC.
Also, learning to properly use punctuation (particularly periods) might not be a bad idea. As it is, your post was very hard to read.
Good luck!

Login screen before the actual application in an applet.

Similar Messages

Maybe you are looking for