Logitech g5 mice ain't working on mac. Help?

What could be the problem. I connect my logitech g5 mice to mac it works fine like 5-15min, after that stops working...

Are there any other mice attached? Is the keyboard attached purely a keyboard, or are there other input capabilities?
Is the mouse attached to a high speed or low powered bus? Check Apple menu -> About This Mac -> More info under the USB section of the hardware.
Does the mouse appear in Apple menu -> System Preferneces -> Keyboard and Mouse?
Have you checked if Logitech's software is known to be 10.7.2 compatible and is it installed?

Similar Messages

My Help Viewer is not working for mac help

My Help viewer is not working for mac help. Everytime i choose mac help the window opens then closes. But when i open another help like safari help it opens and works fine. If i switch it back to mac help the window just closes and the application quits.
If you know how to fix please telll!

noname212,
Using "Search Discussions" with the term "Help Viewer" you will lead you to numerous posts which refer to Troubleshooting Help Viewer by Dr. Smoke.
Good Luck
;~)

Logitech Cordless Optical Mouse doesnt work with mac os x 10.4.5?

I just bought a Logitech® Cordless Optical Mouse in japan to use with my powerbook running os x 10.4.5...the mouse doesnt seem to work with the native bluetooth system. so I plugged in the supplied reciever and could get the mouse to move the cursor, but only that. buttons dont work. I down loaded some kind of device manager from the logitech web site but just as the apple bluetooth manager it does not "discover" the mouse.
I noticed that the system requirements for the logitech device manager is osx 10.3 - 10.4.2 so im wondering if my system is to new for this product.
all this i found out after i bought the mouse, and it is a little irritating...it said it was mac compatible on the box...
should I be waiting for an update from logitech or apple concerning this problem.
or is there an easy fix/ anyone else have this problem?
thanks
©

Hi, © ! — or do you prefer Ulfur?
What model? "A Logitech® Cordless Optical Mouse" covers a lot of territory. For example, I have a CordlessOptical11 mouse that's several years old — and IrDA, not Bluetooth. This Logitech page contains a chart defining the name and "device model string" for each product, based on the M/N stamped into the bottom of your mouse. Better safe than sorry: Logitech's support — particularly for Mac folk — can be somewhat challenging. [1]
From there, you might try to confirm that you have the correct driver from Logitech's Support »» Downloads »» Mice page —
— but, Oops! — unfortunately, it may only link to Windows-compatible drivers.
Logitech has used their own patented RF technology for years — and some of their "Bluetooth" products "may not" actually provide Bluetooth functionality in Macs. (OK, that was tongue-in-cheek: I really mean "do not.") The mice usually work, though.
AFAIK, Logitech Control Center 1.6.2 is their latest driver for USB mice. (They have other mouse drivers, too.)
However, as this page explains, their V270 Bluetooth mouse supposedly doesn't require a driver separate from what's provided by Apple.
You may want to search this forum for differing views on this. Also, go to this Logitech user forums page and click to select the Macintosh forum. I won't deny you the (dis-?)pleasure of reading about others' experiences...
[1] Sorry, I don't mean to be as discouraging as I've probably made things sound. Most Mac folks have actually had pretty good experience with Logitech USB and Bluetooth mice — but Logitech Support's attitude toward Mac users could be improved. Please check things to confirm what's what — then post back, and I — or someone else who's using an MX900 or MX1000 or V270 or whatever Logitech mouse — will try to help further.
Looking forward to hearing back from you,
Sincerely,
Dean
[2] The links I've provided all work within Logitech's US website (I just tested). If appropriate, you may want to start fresh from the Logitech home page and find comparable international pages.
[2,059 ⊥ 3,455]

HT2844 Head phone and mic is not working in mac pro

i have philips headphones and mic. this is conected but not working

What part is not working?
Do you get any sound out?
Do you get any sound in?
What does the contol panel indicate?

Will my USB Mic "Shure PG27" work on iOS aswell as it does on Mac OS X ?

Will my USB Mic "Shure PG27" work on iOS aswell as it does on Mac OS X ?

Thanks, good to know - also I found out that USB devices don't work in general on ioS only because they work on Mac X. Though ioS is derived from X it has a different processor architecture.

My logitech mic does not work with Audition anymore

My Logitech mic does not work with Audition anymore. I had to reformat my hard drive and re install Audition, it is not working any more, I have test the mic with another software and it work fine. help please.

Fixed. Switched card into different slot, not sure exactly what made it work, but it does now.
Go ahead and delete thread if you like.

Wow Wireless Headset Mic stops working on Mac OSX 10.6.3

I'm running the April drivers and firmware for my wireless wow headset. After the install of the drivers all was working great. No lag from mic etc. I shutdown my computer went to bed. Next day I booted up, worked a bit and then turned on my headset. Sound worked fine but no mic input detectable from any application. Unplugged the transmitter and replugged it. Sound still works but not mic. I rebooted with the headset on and mic worked. I assumed headset needed to be on during boot up. This morning same thing but even reboot with the headset on doesn't give me microphone functionality.
I've double checked the mic is plugged in properly to the headset but i just can't get any sound out of it.

Ok, I found a work around. It seems the mic doesn't initialize sometimes when i boot up and power on the head set. I can tell the mic isn't working because if i press the mute button the red light doesn't come on indicating I'm muted. To fix this i power off the headset and power it back on. This takes several attempts. I also found it seems to do better at initializing when its not plugged into the charging cable.

A mic that will work with PE10

I am working with PE10 and need a mic that will allow me to do voice overs. From what I have read, a USB mic is not one that works. Will someone please suggest a mic that will work with a MacBook Pro and PE10?
Thank you,
Nanette

Nanette
Several years ago I purchased a desktop Labtec microphone that plugs into the computer jack. It is not a Logitech product.
After all these years, it is still working helping me generating great narrations with various versions of Premiere Elements on Windows XP 32 bit and Windows 7 64 bit. I am not sure if the brand/model is still around and whether or is compatible with Mac.
When I first went looking for a desktop microphone, I could not find a USB type that worked. But, it took me a while to find the "right" desktop microphone even for the ones that plug into the computer jack.
I will post this Adobe link for narration in case you ever need it.
http://help.adobe.com/en_US/premiereelements/using/WSED45334D-D309-445e-AF34-2AB3E3CCAA8D. html
But, I would mention something that you might want to consider if all else fails...if your preferred microphone works with it,, create your narrations with the free audio editor named Audacity and then import the .wav narrations into Premiere Elements with Premiere Elements Get Media/Files and Folders.
http://audacity.sourceforge.net/
We will be watching for your progress.
Thanks.
ATR

The only time the sound/speaker and mic don't work is when I answer or make a call

The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty

Why is my mic suddenly not working in PPro CS4?

Hi
I have a mac running CS4 Premiere Pro.
I'm using a SM57 mic which I plug into a pre-amp to boost the sound and then from this box I plug into the line-in slot on my mac. I'm recording simple voice-overs over silent footage.
It's all been working beautifully. But now it's not receiving any sound (the green bars don't move) and I can't work out why.
It's not the pre-amp, cables or mic - they all work fine through garageband (but the sound quality isn't nearly as good so I don't want to use that and then export to PPro)
I'm certain I have set it up as I always have done. I'm completely baffled as to what has gone wrong.
Any suggestions much appreciated...

When something works one day, but not the next, then something has changed. The task is to find out what has changed. My first guess would be that an Audio Hardware setting in PrPro has changed, Edit>Preferences>Audio Hardware. The second would be that something has changed in the OS, but as the mic still functions in other programs, but not in PrPro, I moved this down to #2, for possible causes.
Check the Audio Hardware settings in PrPro, and maybe upload screen-caps of the dialog screens, so that others can see the settings, if nothing jumps out at you.
If nothing is wrong in Audio Hardware, I would Delete, Move or Rename the Preferences file for PrPro. I will not even try to talk you though that on a Mac, as I will certainly mess things up, being a PC-guy. PrPro will regenerate a new Preferences file, though you will have to then manually adjust those, as you require, since it will be the install default Preferences. Maybe a Mac-user can give you directions on how to do this. On a PC, one would just hold down the Ctrl+Alt+Shift keys, while doing the full launch of the program, all the way through that launch. Or, they could go into the folder structure, and locate the Preferences file, and either Deleting it, Moving it, or Renaming it.
Good luck,
Hunt

Mic suddenly stopped working

Okay so. I have a Turtle Beach Ear Force X12 headset which has been working great since I got it a couple months ago, well today it suddenly stopped working skype says my mic is muted and it's not, I can hear myself through the headset which means it's on and at least working but apperently it's my computer that's not picking it up and I have no idea what it possibly could be, I'm on Windows 7 btw.
Also skype kept moving the mic volume thing all the way down but I don't know if that's related at all.

When I make a call my mic doesn't work. Looks like I'm not the only one experiencing problems. Skype is slow and often won't even hook up. Tried my wifes mac with same result, my blackberry phone same result. I've become aware of how dependend on SKYPE i am.

My Headset mic won't work.

Hello Apple Support! As it is in the title my headset mic won't work, and I just bought them today . My headset is: Microsoft LifeChat lx-2000 (yes it is compatible with mac)
Image
Already done: Went to system preferences====> Sound ===> Input (did not see it in the input but in only in the output)
Plugged the mic plug in the Symbole like so=> >O< (2 arrows pointing left and right and a circle in the center).
Please help me!

Uhhh, sadly they don't tell you which Macs it works on, seems only the older ones, this from the PDF...
For a Macintosh PC:
• Mac OS X v10.1-10.5.x
• Analog audio input/output ports

Just reinstalled OS 10.6 and updated to 10.6.8 and internal mic doesn't work...

I reinstalled the system to try and fix the DVD player, which was refusing to play most (but not all) my DVD's... the new system didn't fix the DVD problem and now the mic doesn't work either!!??!?!?!
Any ideas?

OK, I don't think I'll be starting that tonight though, might try it later in the week. Thanks very much for the advice, kind of what I expected, just hoped for an easier solution! Mac always seems to go back to "whipe it and start again" - you'd think there'd be some targetted system app testing tool that would help identify probably causes... but there we are, rant over, thanks for the help.

My mic won't work on any applications. What do I do?

Ok. So whenever I skype call someone, My mic won't work! So I have to type in the skype chat while they talk. Kind of embarrising. Also, I need to make some screen and audio recordings on QuickTime Player. So I try to talk. Play back the audio recording. And no sounds! How do I get my mic to work?
Info on my computer: I run on Mac OSX Mountain Lion.

So do you have your internal microphone set as the input? Go to System Preferences > Sound > Input
And on Skype > Preferences, is this what you have set in Audio:

IPhone headset working with Mac Os X but not in Windows Xp

Hello, I have an aluminium unibody MacBook and an iPhone.
When working on Mac OS X iPhone's headset mic works perfectly but when I'm in Windows Xp using BootCamp I can't get it to work. Any idea how to fix this?
Thanks in advance,
Mexflubber.
Message was edited by: Mexflubber

I'm having the same issues...just waiting for that driver update APPLE!

Logitech g5 mice ain't working on mac. Help?

Similar Messages

Maybe you are looking for