Logs during starting of SAP Web AS
Hi,
Could any one help me in locating the folder structure where the logs would be when SAP Web AS is started ?
Thanks !
Karthik
Hai,
For ABAP you can see the startup logs under /home/<sid>adm.
You will find the startsap.log there.
Check /usr/sap/SID/Instance dir/work for all the workprocess trace files.
If you get any problem in starting the Instance you have to look in the above paths to get the information on the error.
For JAVA you can see the logs under
/usr/sap/SID/DVEBMGS00/j2ee/cluster/server0/log for defaultTrace.trc files which is same as dev_w* files in ABAP.
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/46/952c00554915eee10000000a114a6b/content.htm
You can try ADM200 for further details.
http://www.sapdb.info/adm200-sap-web-application-server-java-administration/
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 16, 2009 11:49 AM
Edited by: Yoganand Vedagiri on Feb 16, 2009 11:53 AM
Similar Messages
-
Why it take so long to start the SAP Web Application Server?
As I read from the doc that starting the SAP Web Application Server will take from 25 to 40 minutes, I don't believe. But as I try it on my machine, it does take really so long. Isn't it a wonder?
I am used to work with Tomcat, JBoss, BEA etc. None of them will take so long.Hi Chen,
In a WAS I assume that it has dual stack (ABAP + JAVA)
For the startup of a ABAP Stack it generally takes about 2 minutes or so.
And for the WAS JAVA STACK should take around 8 to 15 minutes depending on the application, services and hardware sizing.
The reason for the long time required for a WAS Java Stackis:
JAVA Stack depends on three diffrent components: a) dispatcher(java) b)SDM c) Server0 process.
Now before the execution of all these the first thing what happens is the initializastion of jcontrol which inturn initiates the java bootstrap process.
At this moment of time the JVM environment takes some time for the loading and memory management. Once the JVM is loaded successfully then only the three compnents (SDM, dispatcher and server0) are initiated to run.
The SDM and dispatcher do started up with a couple of services and hence require not toomuch of time.
But the main component i.e Server0 process consumes a lot of time to startup at it requires many of the Java stack services to start before it reaches running state.
Again the port configuration for HTTP for SDM , dispatcher , server0 and java process also takes place.
So this was an overview for the Time required for a WAS Stack to come up in operational condition.
Apart from this , seeing specifically to your scenario, wherein it takes 25 - 40 minutes could be an issue with the Hardaware sizing of the Server and the Sofware compnents / tools loaded. We might need to analyze it in more detail to get a clear picture.
I hope this helps you!
Regards,
Prem -
Ias 60 sp2 - install - error message during start up of web server
I am installing ias60 sp2 on solaris 2.6.
I have following issues:
(1)
While installing the ias 60 at the end of the installation while starting
the web server I got the following
error message.
libthread panic: systhread_create():alloc_thread returns 0 (no mem) (PID:
1566
4 LWP 1)
stacktrace:
ef3c31e8
1329c
1236c
0
(2) I want to make the ias60 to communicate with the external web server.
But the 'setup' utility does not allow me to do the selective install. It
foreces the web server to be on the same machine as the appserver. I have
installed the iws41 web server and proceed with the installation. In the
installation doc it looks like by installing 'web connector' we can make the
ias communicate with the external web server. Since the setup utility does
not permit selective install how do i install the 'web connector' on the
external web server. I am using the ias60 test drive for the installation.
Is it a limitation on the 'test drive'.
I apprciate your suggestions on the above.
Thanks
Palani
Thanks
PalaniI'm not sure what the problem is with alloc_thread.
But, yes, the installer limitation is because you are using the TestDrive bits.
TestDrive is designed for ease of installation, and many of the installer
options are not available in TestDrive.
David
(2) I want to make the ias60 to communicate with the external web server.
But the 'setup' utility does not allow me to do the selective install. It
foreces the web server to be on the same machine as the appserver. I have
installed the iws41 web server and proceed with the installation. In the
installation doc it looks like by installing 'web connector' we can make the
ias communicate with the external web server. Since the setup utility does
not permit selective install how do i install the 'web connector' on the
external web server. I am using the ias60 test drive for the installation.
Is it a limitation on the 'test drive'. -
We are having issues with our SSL connection to the SAP Web AS. Below is the error in the log files:
[Thr 472] =================================================
[Thr 472] = SSL Initialization on PC with Windows NT
[Thr 472] = (700_REL,Jul 14 2008,mt,ascii,SAP_UC/size_t/void* = 8/32/32)
[Thr 472] profile param "ssl/ssl_lib" = "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sapcrypto.dll"
resulting Filename = "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sapcrypto.dll"
[Thr 472] profile param "ssl/server_pse" = "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\<Our PSE>.pse"
resulting Filename = "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\<Our PSE>.pse"
[Thr 472] profile param "ssl/client_pse" = "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\SAPSSLC.PSE"
resulting Filename = "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\SAPSSLC.PSE"
[Thr 472] = found SAPCRYPTOLIB 5.5.5C pl24 (Jun 11 2008) MT-safe
[Thr 472] = current UserID: NT AUTHORITY\SYSTEM
[Thr 472] = found SECUDIR environment variable
[Thr 472] = using SECUDIR=c:\program files\sap\sapwebdisp\
[Thr 472] *** ERROR => secudessl_Create_SSL_CTX(): PSE "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\<Our PSE>.pse" not found! [ssslsecu.c 1354]
[Thr 472] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 1824 (0x00000720) = "Wrong or Missing PIN for PSE"
[Thr 472] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 472] ERROR in SSL_CTX_set_default_pse_by_name: (1824/0x0720) Wrong or Missing PIN for PSE : "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\<Our PSE>.pse"
ERROR in ssl_set_pse: (1824/0x0720) Wrong or Missing PIN for PSE : "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\<Our PSE>.pse"
ERROR in af_open: (1824/0x0720) Wrong or Missing PIN for PSE : "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\<Our PSE>.pse"
ERROR in secsw_open: (1824/0x0720) Wrong or Missing PIN for PSE : "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\<Our PSE>.pse"
ERROR in sec_parse_PSEInfo_cont: (1824/0x0720) Wrong or Missing PIN for PSE : "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\<Our PSE>.pse"
[Thr 472] << -
End of Secude-SSL Errorstack -
[Thr 472] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
for "C:\Program Files\SAP\SAPWebDisp\DEV\<Our Site>\sec\<OurPSE>.pse" [ssslxxi.c 2278]
[Thr 472] Tue Mar 31 13:30:06 2009
[Thr 472] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 472] =================================================
[Thr 472] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
[Thr 472] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c 319]
[Thr 3744] IcmCreateWorkerThreads: created worker thread 0
[Thr 2952] *** ERROR => IcmConnClientRqCreate: No service for protocol HTTPS started [icxxconn.c 2701]
[Thr 2952] *** ERROR => IcmConnClientRqCreate() failed (rc=-1) [icrxx.c 5234]
[Thr 2952] *** ERROR => Could not connect to SAP Message Server at onebase. URL=/msgserver/text/logon?version=1.2 [icrxx.c 2591]
[Thr 2952] *** ERROR => rc=-1, HTTP response code: 0 [icrxx.c 2592]
[Thr 2952] *** ERROR => see also OSS note 552286 [icrxx.c 2593]
[Thr 3744] IcmCreateWorkerThreads: created worker thread 1
[Thr 3744] IcmCreateWorkerThreads: created worker thread 2
[Thr 3744] IcmCreateWorkerThreads: created worker thread 3
[Thr 3744] IcmCreateWorkerThreads: created worker thread 4
[Thr 3292] IcmWatchDogThread: watchdog started
I've already used sapgenpse seclogin -p <PSE File> -x <PIN> to create a pin. I've also gone and deleted the old pin that used to be there and created a new one.
Also I noticed it says "Beware: changing a PIN of a PSE will not auto-update the SSO-credential
Beware: adding a new credential will not auto-update an existing credential"
So once you change it how do you update it? Do you need to reboot the Web Dispatcher or do you just need to restarted the service?I am also facing same issue.
I have added credentials also and successfully done.
Here attaching trace file. Please suggest
trc file: "dev_webdisp", trc level: 1, release: "720"
sysno 00
sid WD1
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7200
patchlevel 0
patchno 68
intno 20020600
make multithreaded, ASCII, 64 bit, optimized
profile /usr/sap/WD1/profile/WD1_W00_sapportal
pid 26732
[Thr 139840314074976] Thu Oct 31 13:54:15 2013
[Thr 139840314074976] *** WARNING => The maximum number of sockets supported on this host is 1020.
This is less than the number of sockets configured in parameter icm/max_sockets (8192) [icxxrout_mt. 3417]
[Thr 139840314074976] started security log to file ./dev_icm_sec
[Thr 139840314074976] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 139840314074976] SAP Web Dispatcher running on: sapportal.abrajoman.com
[Thr 139840314074976] MtxInit: 30001 0 2
[Thr 139840314074976] ***LOG IM1=> IcmInit, Startup (SAP Web Dispatcher&sapportal.abrajoman.com&26732&) [icxxrout_mt. 1914]
[Thr 139840314074976] IcmInit: listening to admin port: 65000
[Thr 139840314074976] MPI: dynamic quotas disabled.
[Thr 139840314074976] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
[Thr 139840314074976] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
[Thr 139840314074976] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
[Thr 139840314074976] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[Thr 139840314074976] IcrCoreInitSessionTable: Session table initialized
[Thr 139840167098112] HttpExtractArchive: files from archive /usr/sap/WD1/SYS/exe/run/wdispadmin.SAR in directory /usr/sap/WD1/W00/data/icmandir are up to date
[Thr 139840167098112] HttpISubHandlerAdd: Added handler HttpAdminHandler(0x7f2f0c000e70), slot=0, flags=36869) for /sap/admin, active: 1, table 0x7f2f0c000a10
[Thr 139840167098112] HttpISubHandlerAdd: Added handler HttpModHandler(0x7f2f0c0012e0), slot=1, flags=12293) for /, active: 1, table 0x7f2f0c000a10
[Thr 139840167098112] CsiInit(): Initializing the Content Scan Interface
[Thr 139840167098112] AMD/Intel x86_64 with Linux (mt,ascii,SAP_CHAR/size_t/void* = 8/64/64)
[Thr 139840167098112] CsiInit(): CSA_LIB = "/usr/sap/WD1/SYS/exe/run/libsapcsa.so"
[Thr 139840167098112] HttpISubHandlerAdd: Added handler HttpAuthHandler(0x7f2f0c001440), slot=2, flags=12293) for /, active: 1, table 0x7f2f0c000a10
[Thr 139840167098112] HttpISubHandlerAdd: Added handler HttpWebDispHandler(0x7f2f0c008340), slot=3, flags=1060869) for /, active: 1, table 0x7f2f0c000a10
[Thr 139840167098112] Started service PORT=8100,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 139840167098112] =================================================
[Thr 139840167098112] = SSL Initialization platform tag=(linuxx86_64_gcc41)
[Thr 139840167098112] = (720_REL,Oct 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
[Thr 139840167098112] profile param "ssl/ssl_lib" = "/usr/sap/WD1/exe/libsapcrypto.so"
[Thr 139840167098112] resulting Filename = "/usr/sap/WD1/exe/libsapcrypto.so"
[Thr 139840167098112] = found SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,AESNI,NB
[Thr 139840167098112] = current UserID: "wd1adm", env-var USER="wd1adm"
[Thr 139840167098112] = using SECUDIR=/usr/sap/WD1/W00/sec
[Thr 139840167098112] profile param "ssl/server_pse" = "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840167098112] resulting Filename = "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840167098112] *** ERROR => secudessl_Create_SSL_CTX(): PSE "/usr/sap/WD1/W00/sec/epssl.pse": unable to use! [ssslsecu_mt. 1735]
[Thr 139840167098112] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
[Thr 139840167098112] secude_error 1824 (0x00000720) = "Wrong or Missing PIN for PSE"
[Thr 139840167098112] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
[Thr 139840167098112] ERROR in SSL_CTX_set_default_pse_by_name: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840167098112] ERROR in ssl_set_pse: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840167098112] ERROR in af_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840167098112] ERROR in secsw_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840167098112] ERROR in sec_parse_PSEInfo_cont: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840167098112] << ---------- End of Secude-SSL Errorstack ----------
[Thr 139840167098112] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
for "/usr/sap/WD1/W00/sec/epssl.pse" [ssslxxi_mt.c 2324]
[Thr 139840167098112] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 139840167098112] =================================================
[Thr 139840167098112]
[Thr 139840167098112] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
[Thr 139840167098112] *** ERROR => IcmServInitSSL: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv_mt. 251]
[Thr 139840167098112] *** WARNING => Could not start service (rc=-14) PORT=8300,PROT=HTTPS,TIMEOUT=60,PROCTIMEOUT=900,VCLIENT=0 [icxxserv_mt. 651]
[Thr 139840314074976] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 0
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 1
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 2
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 3
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 4
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 5
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 6
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 7
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 8
[Thr 139840314074976] IcmCreateWorkerThreads: created worker thread 9
[Thr 139840167098112] IcmWatchDogThread: watchdog started
[Thr 139840148838144] Thu Oct 31 13:54:36 2013
[Thr 139840148838144] =================================================
[Thr 139840148838144] = SSL Initialization platform tag=(linuxx86_64_gcc41)
[Thr 139840148838144] = (720_REL,Oct 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
[Thr 139840148838144] profile param "ssl/ssl_lib" = "/usr/sap/WD1/exe/libsapcrypto.so"
[Thr 139840148838144] resulting Filename = "/usr/sap/WD1/exe/libsapcrypto.so"
[Thr 139840148838144] = found SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,AESNI,NB
[Thr 139840148838144] = current UserID: "wd1adm", env-var USER="wd1adm"
[Thr 139840148838144] = using SECUDIR=/usr/sap/WD1/W00/sec
[Thr 139840148838144] profile param "ssl/server_pse" = "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840148838144] resulting Filename = "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840148838144] *** ERROR => secudessl_Create_SSL_CTX(): PSE "/usr/sap/WD1/W00/sec/epssl.pse": unable to use! [ssslsecu_mt. 1735]
[Thr 139840148838144] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
[Thr 139840148838144] secude_error 1824 (0x00000720) = "Wrong or Missing PIN for PSE"
[Thr 139840148838144] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
[Thr 139840148838144] ERROR in SSL_CTX_set_default_pse_by_name: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840148838144] ERROR in ssl_set_pse: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840148838144] ERROR in af_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840148838144] ERROR in secsw_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840148838144] ERROR in sec_parse_PSEInfo_cont: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840148838144] << ---------- End of Secude-SSL Errorstack ----------
[Thr 139840148838144] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
for "/usr/sap/WD1/W00/sec/epssl.pse" [ssslxxi_mt.c 2324]
[Thr 139840148838144] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 139840148838144] =================================================
[Thr 139840148838144]
[Thr 139840148838144] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
[Thr 139840148838144] *** ERROR => IcmServInitSSL: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv_mt. 251]
[Thr 139840148838144] *** WARNING => Could not reactivate service (rc=-14) PORT=8300,PROT=HTTPS,TIMEOUT=60,PROCTIMEOUT=900,VCLIENT=0 [icxxserv_mt. 1550]
[Thr 139840148838144] *** ERROR => ICP_icm_mod_service: ModService(7) failed for 8300, HTTPS(rc=-14) [icrxxadmin_m 5519]
[Thr 139840151480064] Fri Nov 1 10:54:13 2013
[Thr 139840151480064] =================================================
[Thr 139840151480064] = SSL Initialization platform tag=(linuxx86_64_gcc41)
[Thr 139840151480064] = (720_REL,Oct 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
[Thr 139840151480064] profile param "ssl/ssl_lib" = "/usr/sap/WD1/exe/libsapcrypto.so"
[Thr 139840151480064] resulting Filename = "/usr/sap/WD1/exe/libsapcrypto.so"
[Thr 139840151480064] = found SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,AESNI,NB
[Thr 139840151480064] = current UserID: "wd1adm", env-var USER="wd1adm"
[Thr 139840151480064] = using SECUDIR=/usr/sap/WD1/W00/sec
[Thr 139840151480064] profile param "ssl/server_pse" = "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840151480064] resulting Filename = "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840151480064] *** ERROR => secudessl_Create_SSL_CTX(): PSE "/usr/sap/WD1/W00/sec/epssl.pse": unable to use! [ssslsecu_mt. 1735]
[Thr 139840151480064] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
[Thr 139840151480064] secude_error 1824 (0x00000720) = "Wrong or Missing PIN for PSE"
[Thr 139840151480064] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
[Thr 139840151480064] ERROR in SSL_CTX_set_default_pse_by_name: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840151480064] ERROR in ssl_set_pse: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840151480064] ERROR in af_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840151480064] ERROR in secsw_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840151480064] ERROR in sec_parse_PSEInfo_cont: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
[Thr 139840151480064] << ---------- End of Secude-SSL Errorstack ----------
[Thr 139840151480064] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
for "/usr/sap/WD1/W00/sec/epssl.pse" [ssslxxi_mt.c 2324]
[Thr 139840151480064] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 139840151480064] =================================================
[Thr 139840151480064]
[Thr 139840151480064] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
[Thr 139840151480064] *** ERROR => IcmServInitSSL: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv_mt. 251]
[Thr 139840151480064] *** WARNING => Could not reactivate service (rc=-14) PORT=8300,PROT=HTTPS,TIMEOUT=60,PROCTIMEOUT=900,VCLIENT=0 [icxxserv_mt. 1550]
[Thr 139840151480064] *** ERROR => ICP_icm_mod_service: ModService(7) failed for 8300, HTTPS(rc=-14) [icrxxadmin_m 5519]
Trace File
(11768bytes)
Thanks,
Kundan -
hello,
I have installed a CD named SAP WEB AS Rel.6.2.
And I dont know whethear it is WEBAS or not.
Infact It has loaded SAP J2EE engine.
Is this SAP J2EE Engine is SAP WebAS?
Please let us know whethear both are same or not?
And also let me know how to connect this WebAS with R/3?
I have successfully installed the SAP J2EE Engine and I dont know how to work with that also..Infact I dont have the Administrator password also.
Can anyone help me in configuring this WebAS?
and I didnt get the NetWeaver Development Studio-An IDE for Web based Application Development in the tools given by the SAP?
How can i get that IDE?
Please help me in configuring all these?
Am really in need of HELP ...
Regards,
RajaHi Raja Shekhar,
People on this forum generally post questions that are specific to a particular problem they face while using SAP.
If you need help getting started on SAP Web AS, have a look at
http://help.sap.com
Also sdn.sap.com has good content on SAP Web AS.
one such good document for beginners is available at the link below:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa
Also you can find the administration manual for SAP WebAS on help.sap.com
http://help.sap.com/saphelp_nw70/helpdata/en/1a/819d42449b0731e10000000a1550b0/frameset.htm
Hope that helps and good luck with your learning.
Regards,
Siddhesh -
New features provided by SAP Web AS 7.00 and 7.10
Hello!
I am interested, which features are provided starting with Sap Web AS 7.00 and 7.10, generally as well as special for both runtimes
in <b>ABAP</b>-area (e.g. VM in ABAP, Code-completion)
in <b>Java</b>-area (e.g. J2EE 1.4/1.5, Portlets, Comunication mechanisms JRA/JCO, bgRFC)
DB-API-???
Thank You in advance!
Regards
A. Henkehi
new features added in WAS7.0 for ABAP stack
1.Webdynpro for ABAP
2.New Enhancement Framework
3.Switch Frame Work
4.Adobe Forms integeration
5.New features added to ABAP Editor.
Also note that MySAP Business Suite is also the part of WAS7.0 release.
For Java stack new features have been added to Netweaver Developer Studio,EP and KM areas.Also BI-Java is also the part of WAS7.0 Release.
Cheers,
Abdul Hakim
Mark all useful answers.. -
SAP Web Dispatcher does not start as windows service
Hi,
I have successfully installed and configured SAP Web Dispatcher. When I start the web dispatcher from command prompt, it works fine. I created a windows service for web dispatcher using the command
ntscmgr install sapwebdisp -b "c:\program files\sap\sapwebdisp\sapwebdisp.exe"
-p "service pf=sapwebdisp.pfl -cleanup -auto_restart"
The command successfully created sapwebdisp service. The service also starts fine, but web dispatcher does not get started.
Any ideas experts?Hi,
Ok. Few suggestions.
1. Can you review the SAP note:
552286 Troubleshooting for the SAP Web Dispatcher
2. When you said: "web dispatcher does not get started ", what error you got ? Can you be more details here ?
3. Please check the trace file dev_webdisp" that generated in the work directory. If the log entries is not abvious, increase the trace level to 2 or 3, and reproduce and re-check the trace file.
4. What is the output of the command "sapwebdisp -v"
5. How about sapwebdisp.pfl ? Are those settings correct ?
Hope this helps.
Regards,
Vincent -
Problem in starting the SAP ME Web Console
Good Morning.
I am installing el Mobile Enginee 2.1 SP03 over the SAP R/3 Enterprise 4.7 Set 2.0 and J2EE Engine 6.30.
In the phase of "Starting the SAP ME Web Console", I executed the url:http://tssapr3:50000/me/WebConsole/login.
I have the following error:
Application error occurs during processing the request.
Details: java.lang.NoClassDefFoundError: com/sap/mw/jco/JCO$Record
at com.sap.ip.me.webconsole.ControllerServlet.execute(Unknown Source)
at com.sap.ip.me.webconsole.ControllerServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runSerlvet
(HttpHandlerImpl.java:262)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReques
t(HttpHandlerImpl.java:92)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:300)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:279)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebConta
iner(RequestAnalizer.java:626)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:199)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:90)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:163)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessio
nMessageListener.process(ApplicationSessionMessageListener.java:37)
at
com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner
.run(UnorderedChannel.java:60)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:56)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:82)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:139)
What can I do?Hello Luis,
please see my reply to your other thread here:
Register archives *.jar of the WebConsole with the tool DeployTool
Regards,
Tim -
Problem: 503 Service Unavailable SAP WebAS Engine is starting...
Problem: 503 Service Unavailable
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
Details: No details available
This problem occurs suddenly after a time interval when working on Sap Enterprise Portal. Please Suggest me Number of possible solutions for this type of problem.....
Thank's in Advance
Regards-
Sumeet SharmaHi,
The issue here is that the JAVA engine has not ye started completely. Check the status of the SAP instance in SAP MMC. You need to have the SDM, dipatcher, Server0 in green(started completely). If the server0 is in yellow/grey, then u will not be able to launch the portal URL.
Check and post us the dev_server0 log for more information.
Regards,
Varadharajan M -
Possible ways to start SAP Web AS services
I am using J2EE SAP Web AS 7.0 on UNIX platform and herein i use startsap script to start SAP as well as database services. My concern here is that what all are the possible ways to start the SAP services apart from the above mentioned script? One i could figure out is to run all the commands in the script one by one, though does not make sense if the script is already available
Reason for asking above question is that i want to set an environment variable whenever SAP Engine starts up. And, if i embed this line in startsap script it would solve my purpose but if there is any other way also to start SAP services, then i have to cover those use cases also. So, please provide your suggestions for my requirement.
ThanksThanks for your input and it looks like adding an environment variable in startsap script is not a good option.
My requirement is that my SDA file has dependecy on some third party dll's and at the time of starting SAP Web AS, this dll path should be available at the beginning of LIBPATH variable. So, please let me know if some fix is available for my requirement.
Also, i have discoverd that SAP profile (located at /usr/sap/<SID>/profile/START_JC<SID>_<machine name>) has the required parameters( LIBPATH, etc) and if i add my dll path in these environment variables, i am able to load my dll at the SAP starting time. Here my questions are:
1. Is it fine to make changes in this profile file?
2. Would my changes be overwritten if the kernel upgrade happens?
3. If i start SAP using MMC (suggested by you), still this profile file be read for starting SAP Web AS and the dll's would be loaded?
Apart from this i tried out using "There is a java version as well, which can be started from a browser:
http://<hostname>:5<instance number>13" which internally uses MC. Here if i try starting SAP WebAS, it prompts for user name and password. I tried out <SID>adm user, J2EE Administrator user and machine root user but all these options were ruled out by the Authentication module. Can you please suggest which user name should i try to stop/start SAP using MMC?
Thanks -
SAP WebAS Engine is starting...................
Problem: 503 Service Unavailable
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
Details: No details available
This problem occurs suddenly after a time interval when working on Sap Enterprise Portal. Please Suggest me Number of possible solutions for this type of problem.....
Thank's in Advance
Regards-
Sumeet Sharmahi....
Thank's for Reply
I have increased the heap memory size and permissible memory size in dev_server0 file.... but i still get this problem....
Engine automatically starts after an interval of time....
Please suggest me other possible solutions -
Problem of SAP WebAS Engine is starting...
Dear experts,
i am working properly in portal but some time an error automatically arise
503 Service Unavailable 7.00
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
Details: No details available
and i increase the heap memory to 2 gb in server0 file permsize to 512 mb as sujeested by some experts
but i got the same problem again after some time
please help..........<<Do not post the same question across a number of forums>>
-
HTTPs connection from SAP WebAS
Hello,
I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
The iSaSiLk authentication is based on client certificates.
I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated with no errors. When testing the connection we're getting the following error message:
SAP icm log:
[Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
[Thr 1087400256] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 1087400256] out: sssl_hdl = 0x1a3310c0
[Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
[Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
[Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
[Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
[Thr 1087400256] SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
[Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256] in: hostname = "<remoteServer_to_be_accessed>"
[Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
[Thr 1087400256] SapISSLUseSessionCache(): Creating NEW session (0 cached)
[Thr 1087400256] Tue Jan 13 10:10:22 2009
*[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
[Thr 1087400256] session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
[Thr 1087400256] >> Begin of Secude-SSL Errorstack >>
[Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
[Thr 1087400256] << End of Secude-SSL Errorstack
[Thr 1087400256] SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
[Thr 1087400256] No certificate request received from Server
[Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
[Thr 1087400256] ->> SapSSLErrorName(rc=-57)
[Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
[Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
On the iSaSiLk server we're getting:
ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
ssl_debug(2): Received v3 client_hello handshake message.
ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
ssl_debug(2): CipherSuites supported by the client:
ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
ssl_debug(2): CompressionMethods supported by the client:
ssl_debug(2): NULL
ssl_debug(2): Sending server_hello handshake message.
ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): Selecting CompressionMethod: NULL
ssl_debug(2): Sending certificate handshake message with server certificate...
ssl_debug(2): Sending certificate_request handshake message...
ssl_debug(2): Sending server_hello_done handshake message...
ssl_debug(2): IOException while handshaking: Connection closed by remote host.
ssl_debug(2): Sending alert: Alert Fatal: handshake failure
ssl_debug(2): Shutting down SSL layer...
ssl_debug(2): Closing transport...
From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
Can anyone give me any suggestion?Hello Olivier,
Thanks for your answer.
I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
Filename SAPSSLSPHTID.pse
PIN <no>
Signature X
Encryption X
Profile Parameter
DIR_INSTANCE /usr/sap/XID/DVEBMGS00 /usr/sap/XID/D00
sec/dsakeylengthdefault 1024
sec/libsapsecu /usr/sap/XID/SYS/exe/run/libsapcrypto.so
sec/rsakeylengthdefault 1024
ssf/name SAPSECULIB
ssf/ssf_md_alg SHA1
ssf/ssf_symencr_alg DES-CBC
ssf/ssfapi_lib /usr/sap/XID/SYS/exe/run/libsapcrypto.so
ssf2/name
ssf2/ssf_md_alg SHA1
ssf2/ssf_symencr_alg DES-CBC
ssf2/ssfapi_lib
ssf3/name
ssf3/ssf_md_alg SHA1
ssf3/ssf_symencr_alg DES-CBC
ssf3/ssfapi_lib
Environment variables
USER xidadm
SECUDIR /usr/sap/XID/DVEBMGS00/sec
PSE
Validity 18.12.2008 19:47:04 18.12.2009 19:47:04
Algorithm RSA (OID 1.2.840.113549.1.1.1)
Test signature
Signature OK
Verification OK
Test encryption
Encryption OK
Decryption OK
As you can see, the cipher algorithm used is RSA. Any suggestion... ?
An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
Once again thanks for your answer. -
Unable to install SAP webAS on Windows 2003
Hi Everyone , I am trying to install SAP WebAS Java 6.4. We use an Oracle Database and i want to deploy
our web apps on the SAP WebAS . I get this error during installation :
ERROR 2004-11-09 15:00:39
CJS-00081 Assertion failed: in
function sapdb_sql_query(db_nm, sql_s, db_node) {
var ret_s = "";
var sdbInst = new sdbInstance();
sdbInst.dbName = db_nm;
sdbInst.dbHost = (db_node == undefined) ? installer.getHostName() : db_node;
var r_arr = sdb_sql_query(sql_s, sdbInst);
ASSERT(arguments.callee, r_arr != undefined, "ERROR EXECUTING DBMCLI COMMAND!");
if (r_arr[0] == "false") {
var err_msg = "ERROR EXECUTING SQL QUERY: ";
for (var i_cnt = 1; i_cnt < r_arr.length; i_cnt++) {
err_msg = err_msg + r_arr[i_cnt];
ASSERT(arguments.callee, false, err_msg);
} else {
end_l = new RegExp("END");
for (i_cnt = 0; i_cnt < r_arr.length; i_cnt++) {
if (end_l.test(r_arr[i_cnt])) {
ret_s = r_arr[i_cnt + 1];
break;
return ret_s;
ERROR EXECUTING SQL QUERY: OKERR-24988,ERR_SQL: sql error-5015,Missing keyword:USERGROUP,TIMEOUT,STANDARD,RESOURCE,REPLICATION,NOT,LIKE,EXCLUSIVE,DBA,COSTWARNING,COSTLIMIT,CACHELIMIT
How do i get over this problem ?
Thanks
RaviHello Ravi,
this problem probably occurred when a SQL user was trying to be created using a password with special characters, but failed.
Could you please copy the last couple of lines of the protocol named 'XCMDOUT.log' into this thread?
Regards,
Roland -
J2EE Engine cannot be started. SAP CRM EHP1 Dialog Instance Installation
Hi All,
During Installation of a DI on a Linux host, I encounterd a problem. An error occured during " start dialog instance". The ABAP enginee is started successfully where as the JAVA Enginee cant be started. During investigation I found from the log directory
..j2ee/cluster/server0/log as stated below ..
#1.#0050569F663E001E0000000C0000054F0004803004D18B3F#1266843634469#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_64##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: null
ume.db.connection_pool_type=SAP/BC_UME
ume.db.connection_pool.j2ee.xatransactions_used=false
ume.db.connection_pool.j2ee.is_unicode=false
ume.db.connection_pool.j2ee.oracle_native_driver_used=false: (No text available)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:109)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: null
ume.db.connection_pool_type=SAP/BC_UME
ume.db.connection_pool.j2ee.xatransactions_used=false
ume.db.connection_pool.j2ee.is_unicode=false
ume.db.connection_pool.j2ee.oracle_native_driver_used=false: (No text available)
at com.sap.security.core.persistence.datasource.imp.DataBasePersistence.init(DataBasePersistence.java:887)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:440)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
#1.#0050569F663E001E0000000E0000054F0004803004D18C49#1266843634469#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_64##0#0#Fatal#1#/System/Server/Critical#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
I checked with the env variable and parameter, it all looks good. If anybody finds the same issue please suggest ....
Thanks in Advance.
Regards,
ShashiThere is a troubleshooting topic for this on the Help Portal.
See http://help.sap.com/saphelp_nw70ehp1/helpdata/en/20/361941edd5ef23e10000000a155106/frameset.htm.
-Michael
Maybe you are looking for
-
How to reset display settings? 120 hz over HDMI on 2014 MBPr makes screen go black
Hi, I have a 15" 2014 MBPr with the 750m. Recently, I bought a TV, a vizio M422i-B1. One of my main reasons for buying the TV was to use it as a third display for my mac. I have two displays already connected, a 27 inch 1440 display over thunderbolt,
-
My imac os from 2007 and still works great. Even got the new Lion pgrade. The machine has become quite slow and goes to color wheel between tasks. Any ways to help sort of purchasing a new one
-
My iphone 3 8gb will not update and is stuck on 4.2.1 anyone help??
can anyone help me with my iphone 3 8gb it will not update and is stuck on 4.2.1, everytime i stick it on itunes it just moves the update to a later date everytime, so anyone if you can help me i would be grateful thanks.
-
Drop Transation Log Files in SQL server
Hi friends, I am useing sql server 2005 , in my databse transation log file is increased up to 20 GB ,so i am adding one more transation file , so i want delete pervious unused transation log file,so what is the procedure for drop the
-
Uploading clob column's data into table
Hello everyone ... I used webutil to opload data into blob column then converted blob to clob ... what i have now is comma delimited data that i want to put into a table... so , if i have the clob column like this 1,adam,11/08/08,accountant 2,john,12