Looking for a samsung scx 4200 driver

I'm looking for a printer/scanner driver for the samsung scx 4200...
Looked at the samsung website and downloaded the driver from their site but still did not work..
Tried to contact samsung on many occasions but they have not been the best of help..
The drivers say they install correctly, but then when i go to print get the error that there was an installation error..
Thanks in advance
.

HI,
This may be a problem. That model is not listed here. Mac OS X v10.6: Printer and scanner software
Nor is there a GIMP available. http://gutenprint.sourceforge.net/pSupportedPrinters.php
Try here. Mac OS X v10.6: Mac 101 - Printing - Troubleshooting
I noticed on the Samsung site they offer a Universal Driver but only for Windows. Not Mac friendly for sure.
Carolyn

Similar Messages

Updating to Mavericks Samsung Scx-4200 can no longer print and scan.

In the Apple's driver list my Samsung Scx-4200 doesn't appear any more.
Are there any other compatible drivers to make my printer working?

Hi,
just found a solution! It seems that there is a compatible driver afterall...
Go to this link (it's an official Samsung dutch site) and scroll down to where it says "Stuurprogramma" and download the Scan Driver which is for Mac OS 10.9 (61.44MB) http://www.samsung.com/nl/support/model/SCX-4623FN/SEE
If your Mac doesn't extract the zip automatically then extract it manually. Go into the extracted folder and launch "Installer OS X.app". Note that the Mac OS Gatekeeper might not let you open that file as it might treat it as malware etc (which is weird because the driver came from official Samsung site...). In that case just right-click on the file, then hold down ctrl and click on Open. That should do it. From this point on everything else is straightforward as in a casual installer. Note that you should quit any other open applications before installing scanner drivers!
Now the installer contains several different components (printer driver, scan driver, scan thru software and ica driver). I installed all of these components! Also note that the installer will ask you to restart your computer after it has installed just the first or second component, but don't restart it at this moment. Keep installing until you have installed everything you can (until there is no more installer icons in the dock) and after that you should restart your Mac.
When the Mac has restarted, connect your SCX-4200 to your Mac via usb and go into Applications folder and navigate to Samsung --> Scan & Fax Manager.app. Launch it and you should see your SCX-4200 listed in there which should let you use it as scanner...
Hope this helps.

Fail to print via time capsule (samsung scx-4200)

Hi, i have trouble with print issue..
I have 2 mac os devices:
mac pro with 10.6.7 - conected via ethernet to time capsule
and macbook air with 10.6.7 - conected via wifi to time capsule
and one non mac (acer notebook with ubuntu linux) conected via wifi to time capsule
I buy new printer Samsung SCX-4200 and connect it to time capsule - try to print from Mac Pro - its easy started and good worked..
try to add printer to ubuntu - all nice, printer found, test page work good..
and go to macbook air and try to add printer. Printer adds normally but when i try to print i receive 'nothing' and printer Paused.. But when i put scx-4200 directly to my macbook air via usb - it print and scan normally without any problems.
In both variants with mac os i install drivers for print for mac from samsung.com site directly.
Please help to resolve this issue, no possible to insert usb to macbookair any time when i need to print something.
in /var/log/cups/* i have next messages by tail -f /var/log/cups/* and open textedit and type some text + CTRL+P end press enter ->
localhost - - [30/May/2011:20:37:12 +0300] "POST /printers/Samsung-4200 HTTP/1.1" 200 1312 Create-Job successful-ok
localhost - - [30/May/2011:20:37:12 +0300] "POST /printers/Samsung-4200 HTTP/1.1" 200 12353 Send-Document successful-ok
localhost - - [30/May/2011:20:37:12 +0300] "POST / HTTP/1.1" 200 310 Set-Job-Attributes successful-ok
==> page_log <==
Samsung-4200 9 l33t [30/May/2011:20:37:12 +0300] 1 1 - localhost Untitled A4 -
==> error_log <==
E [30/May/2011:20:37:12 +0300] [Job 9] Unable to read response header - short read
E [30/May/2011:20:37:12 +0300] [Job 9] Unable to open printer (read failure)!
D [30/May/2011:20:37:12 +0300] [Job 9] The following messages were recorded from 20:37:12 to 20:37:12
D [30/May/2011:20:37:12 +0300] [Job 9] Adding start banner page "none".
D [30/May/2011:20:37:12 +0300] [Job 9] Queued on "Samsung-4200" by "l33t".
D [30/May/2011:20:37:12 +0300] [Job 9] File of type application/pdf queued by "l33t".
D [30/May/2011:20:37:12 +0300] [Job 9] Setting job-hold-until to no-hold
D [30/May/2011:20:37:12 +0300] [Job 9] Adding end banner page "none".
D [30/May/2011:20:37:12 +0300] [Job 9] Job released by user.
D [30/May/2011:20:37:12 +0300] [Job 9] job-sheets=none,none
D [30/May/2011:20:37:12 +0300] [Job 9] argv[0]="Samsung-4200"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[1]="9"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[2]="l33t"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[3]="Untitled"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[4]="1"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=TextEdit com.apple.print.JobInfo.PMJobName=Untitled com.apple.print.JobInfo.PMJobOwner=l33t com.apple.print.PageToPaperMappingMediaName=A4 com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=5462 com.apple.print.PrintSettings.PMColorSpaceModel..n.=1 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1580 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 DestinationPrinterID=Samsung-4200 media=A4 PaperInfoIsSuggested..b. pserrorhandler-requested=standard job-uuid=urn:uuid:6c043468-8143-3740-4f5f-c1b8f2958f3b job-originating-host-name=localhost time-at-creation=1306777032 time-at-processing=1306777032 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=A4"
D [30/May/2011:20:37:12 +0300] [Job 9] argv[6]="/private/var/spool/cups/d00009-001"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[0]="<CFProcessPath>"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[9]="HOME=/private/var/spool/cups/tmp"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[11]="[email protected]"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[12]="SOFTWARE=CUPS/1.4.6"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[14]="USER=root"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[17]="IPP_PORT=631"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[18]="CHARSET=utf-8"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[19]="LANG=en_US.UTF-8"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[20]="APPLE_LANGUAGE=en-US"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[21]="PPD=/private/etc/cups/ppd/Samsung-4200.ppd"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[22]="RIP_MAX_CACHE=8m"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[23]="CONTENT_TYPE=application/pdf"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[24]="DEVICE_URI=dnssd://Samsung%20SCX-4200%20Series._riousbprint._tcp.loca l."
D [30/May/2011:20:37:12 +0300] [Job 9] envp[25]="PRINTER_INFO=Samsung-scx4200"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[26]="PRINTER_LOCATION=printer123"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[27]="PRINTER=Samsung-4200"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[28]="CUPS_FILETYPE=document"
D [30/May/2011:20:37:12 +0300] [Job 9] envp[29]="FINAL_CONTENT_TYPE=printer/Samsung-4200"
D [30/May/2011:20:37:12 +0300] [Job 9] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 1759)
D [30/May/2011:20:37:12 +0300] [Job 9] Started filter /Library/Printers/Samsung/SCX-4200/rastertosec (PID 1760)
D [30/May/2011:20:37:12 +0300] [Job 9] Started backend /usr/libexec/cups/backend/dnssd (PID 1761)
D [30/May/2011:20:37:12 +0300] [Job 9] Resolving "Samsung SCX-4200 Series._riousbprint._tcp.local."...
D [30/May/2011:20:37:12 +0300] [Job 9] STATE: +connecting-to-device
D [30/May/2011:20:37:12 +0300] [Job 9] Resolving "Samsung SCX-4200 Series", regtype="_riousbprint._tcp", domain="local."...
D [30/May/2011:20:37:12 +0300] [Job 9] Looking for printer...
D [30/May/2011:20:37:12 +0300] [Job 9] `/private/var/spool/cups/d00009-001' has 1 pages.
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster - opened PPD file "/private/etc/cups/ppd/Samsung-4200.ppd"...
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster: size->width = 595, size->length = 842, size->top = 829.5, size->bottom = 12.5, size->left = 12.5, size->right = 582.5
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster: PreferredRotation = -90
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster - languageLevel = 3, mediaBox.size.width = 595, mediaBox.size.height = 842
D [30/May/2011:20:37:12 +0300] [Job 9] skipBytesPerRow = 2
D [30/May/2011:20:37:12 +0300] [Job 9] band width = 4750, bytesPerRow = 4752, band height = 2206, height = 6808
D [30/May/2011:20:37:12 +0300] [Job 9] context width = 4750, height = 2206, bitsPerComponent = 8, bitsPerPixel = 8, bytesPerRow = 4752, bitmapInfo = 0, resolution = (600.000000, 600.000000)
D [30/May/2011:20:37:12 +0300] [Job 9] NOT using display list
D [30/May/2011:20:37:12 +0300] [Job 9] PAGE: 1 1
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 0% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 7% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 14% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 22% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 29% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 36% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 44% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 51% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 58% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 66% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 73% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 80% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 88% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] Printing page 1, 95% complete...
D [30/May/2011:20:37:12 +0300] [Job 9] cgpdftoraster: bytes written for sheet 1 = 32338000
D [30/May/2011:20:37:12 +0300] [Job 9] Ready to print.
D [30/May/2011:20:37:12 +0300] [Job 9] Resolved as "riousbprint://Time-Capsule-d99f2b.local.:10000/Samsung%20SCX-4200%20Series%208 T66BACPB13615P."...
D [30/May/2011:20:37:12 +0300] [Job 9] STATE: -connecting-to-device,offline-report
D [30/May/2011:20:37:12 +0300] [Job 9] Executing backend "/usr/libexec/cups/backend/riousbprint"...
D [30/May/2011:20:37:12 +0300] [Job 9] STATE: +connecting-to-device
D [30/May/2011:20:37:12 +0300] [Job 9] Looking up "Time-Capsule-d99f2b.local."...
D [30/May/2011:20:37:12 +0300] [Job 9] Connecting to Time-Capsule-d99f2b.local.:10000
D [30/May/2011:20:37:12 +0300] [Job 9] Connecting to printer...
D [30/May/2011:20:37:12 +0300] [Job 9] Connected to 0.0.0.6:10000 (IPv4)...
D [30/May/2011:20:37:12 +0300] [Job 9] Set job-printer-state-message to "Unable to read response header - short read", current level=ERROR
D [30/May/2011:20:37:12 +0300] [Job 9] Backend returned status 1 (failed)
D [30/May/2011:20:37:12 +0300] [Job 9] Printer stopped due to backend errors; please consult the error_log file for details.
D [30/May/2011:20:37:12 +0300] [Job 9] End of messages
D [30/May/2011:20:37:12 +0300] [Job 9] printer-state=5(stopped)
D [30/May/2011:20:37:12 +0300] [Job 9] printer-state-message="Unable to open printer (read failure)!"
D [30/May/2011:20:37:12 +0300] [Job 9] printer-state-reasons=paused

Do a google around for that printer and airport usb.. (since airport is more common).
eg. https://discussions.apple.com/thread/1785847?start=0&tstart=0
Not all printers work or work well through usb print server.. often the drivers are just not written for remote usb connection. Or the printer is GDI type and actually needs direct connection to process the job.
Proper network inkjet printers are cheap.. keep the Canon connected to a computer if you want.. and get a wireless or ethernet network printer.. do not use the USB.. use the printers own internal print server.. and these days make sure it does airprint if you want to use iOS devices.
Remember the printer is cheap.. the companies make all their money on blades ink cartridges. Which they now add chips to, to prevent you cheating and buying OEM types.

Samsung SCX-4200 with Lion?

Hi there,
has anyone had luck yet using an SCX-4200 Laser MFP for scanning on Mac OS X Lion?
Printing works, but the universal scan driver does not find my scanner...

If you want to use the Samsung SCX-4200 printer on OS X you will need to get the latest printer driver from samsung.
http://www.samsung.de/de/support/detail.aspx?aguid=3c6280d5-8701-434a-a664-a28cb 5131a74&dl=driver
It would then be the first driver to use. For scanning it still does not work for me. Samsung only updated the page and states the drivers to be suitable for 10.3 to 10.7, but scanning is not available in LION ....

Hi anyone got a SAMSUNG SCX-4200 PRINTER working with a Mac ?

Hi has anyone managed to get a Samsung scx-4200 printer working with a mac?
2011 driver was the last driver update for mac i hear, downloaded tried a couple but no luck!!!

okay, from what I've read, samsung driver support lies with Apple and not Samsung, so if you can, do a software update
you can try here, apparently, for something that sorta works with your printer
http://www.samsung.com/nl/support/model/SCX-4623FN/SEE
other than that, Gutenprint maybe?
for scanning, I don't know, maybe vuescan
sorry, the crystal ball has gone darkk......
John b

24" iMac 2.8Ghz - won't print to Samsung SCX-4200

New Aluminium iMac connected to 3 printers. Epsom PictureMate and HP Color Laserjet 2600n both work fine. However, Samsung SCX-4200 does nothing when I try to print. Printer appears in the Dock but when I view the printer jobs for the SCX-4200 Series it sometimes shows the job for a short period then says 'No job printing.' The unprinted jobs appear in the completed jobs section as 'Untitled'
The SCX-4200 works with Image Capture (for scanning) so it seems to be connected OK. I have tried deleting and adding the printer but to no avail.
I'm also suffering a very intermittent WiFi connection to my router but that's another story.
Any ideas please.

Obvious really. I have never bothered updating drivers with my macs as it all seemed to happen in the background but a quick visit to the Samsung site, a very easy download, and it started working immediately. Thanks.

Samsung SCX-4200 Scanning Problem

I have a Samsung SCX-4200 Printer/Scanner. I can print to it, but I can't my computer to recognize it as scanner. It used to work in Leopard, but now doesn't work in Snow Leopard.

I have managed to find a solution to scanning via my Samsung SCX-4826 multifunction. I plugged it in via usb directly to my Mac Pro, installed the printer and scan-thru software and expected it to just work. Printing worked the first time, however the scanning was tough. This is not the cleanest solution, but it works just fine for me. So I installed Acrobat Pro and use the Create PDF From Scanner command under File and it finds the scanner. Then it pops up the Samsung software and scans right into Acrobat. In order to scan another document, I need to quit Acrobat and restart the application for it to recognize the scanner again. If this is how it needs to work, fine with me.

How to install samsung scx-4200 printer/scanner on yosemite?

How to install samsung scx-4200 printer/scanner on yosemite?
iam not able to install the drivers for samsung scx-4200 printer/scanner
is there any method for wifi print from my mac air to samsung scx-4200 printer/scanner

Try SpliX, it works ok.

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2?

How to install samsung scx-4200 printer/scanner on Mac OS x 10.9.2? Several attempts with various downloads from Apple and Samsung sites have failed. Any help is higkly appreciated. Thanks in advance!

Thias is what I find in system information:
Samsung Scanner:
Version:          2.01.12
Erhalten von:          Apple
Zuletzt geändert:          10.04.14 21:20
Art:          Universal
64-Bit (Intel):          Ja
Signiert von:          Software Signing, Apple Code Signing Certification Authority, Apple Root CA
Ort:          /Library/Image Capture/Devices/Samsung Scanner.app
Informationen:          Copyright (C) 2013 Samsung Electronics Co., Ltd.

Looking for QUALCOMM un2420 windows 8 driver.

looking for QUALCOMM un2420 windows 8 driver. I try to install the windows7 driver but can`t ......
PLEASE HELP ME

go to action centre
trouble shoot
and follow the instructions
fix the probem
i got my mising drivers like that just try it best of luck
<<---------***Click on “Kudos” STAR to say thanks!*** if i helped you to solve your problem

I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.

I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.

Hi,
I am not sure what the R3271 is, but we have a driver for the R3272 (Spectrum Analyzer with GSM option). Normally API's do not change significantly and so it is very likely that you will be able to use this driver for your application. You can get it by going to www.ni.com/idnet. The easiest way to get the the page is just to seach by vendor.
Hope this helps out.
Aaron K.
Application Engineer
National Instruments

Looking for a script which gives Drive,Diskspacefree,Databasename,Filename,Filetype,Filesize,Spaceused,spacefree,free(%),MaxsizeMB,autogrowthsize,Filegroup

Hi All,
I need a T-script for sql 2005 and 2008 which should give output as:
Looking for a script which gives Drive,Diskspacefree,Databasename,Filename,Filetype,Filesize,Spaceused,spacefree,free(%),MaxsizeMB,autogrowthsize,Filegroup

In the list below, everything that is in bold face is available in sys.master_files:
Drive
Diskspacefree,
Databasename
Filename
Filetype
Filesize
Spaceused,
spacefree,
free(%),
MaxsizeMB
autogrowthsize
Filegroup
Everything in bold face is in sys.master_files. Diskspacefree is also fairly simple; you can get it with xp_fixeddrives.
Filegroup requires you sys.filegroups in every database, although you can hardcode "PRIMARY" for the file_id = 1.
To get space used per file, it appears that you need to need to visit every database and run fileproperty(filename, 'SpaceUsed') to get the data.
You need to revisit the topics for the views and function I have listed here. xp_fixeddrives is undocumented, but the output is very simple to grasp.
Erland Sommarskog, SQL Server MVP, [email protected]

Hi i have tryed looking for my high definition device driver for my acer

Hi i have tryed looking for my high definition device driver for my acer
I have looked on the acar web site and i cant find it at all i am on windows 7 and the updates didn't install it
can some 1 help me find it plz or give me a website to get it

You might want to repost your inquiry to the Acer experts in the
Acer Notebook Support Forum.
Carey Frisch

Samsung SCX-4200, Print and Scanning now working in Snow Leopard 10.6

I found the printer can print right off the bat by selecting the SCX-4300 series driver after the auto-detect.
For scanning, install the Scan driver on this page:
http://www.samsung.com/us/support/supportDownloadCenter.do?prdia_cd=N0000191&prd_mdl_cd=SCX-4200%2FXAA&prd_mdlname=SCX-4200
You'll need to restart your Mac, but now it works perfectly

Hey all,
A quick follow-up to keep you up to date with regards to the repot above...Upon launching the Scanner service from within System Preferences > Print & Fax > "Open Scanner", in a working setup (i.e. upon a fresh system restart), the console presents the following:
20/4/11 3:15:07 PM PrinterProxy[1162] *** Assertion failure in -[NSMenu itemAtIndex:], /SourceCache/AppKit/AppKit-1038.35/Menus.subproj/NSMenu.m:779
20/4/11 3:15:07 PM PrinterProxy[1162] Invalid parameter not satisfying: (index >= 0) && (index < [_itemArray count])
This new clue along with all the previous console messages probably shout out the cause of the problem, but as I mentioned before I am unable to interpret any of it..Bring on the big guns...any UNIX/OSX masterchiefs around here?
Regards,
Dimitris

Looking for a replacement m2010us hard drive adapter

Hello all,
I have a mostly intact Compaq m2010us, sans HDD caddy/adapter. I searched a little online, and found a few different adapters being described as the proper one. Is there still a way to purchase one through HP or equivelent source? Just trying to fix and polish this up and donate it to a student in need.
Thank you,
-J

Seagate is recommended due to the 5 year warranty, though other manufacturer's are good and work well and usually offers 3 year warranties. As was said above, any SATA drive will work, whether it's 150 or 300, though the laptop only will run at 150 speed.
I recommend getting a 7200rpm drive with as much cache as possible. A lot of newer drives are offering 16MB caches which show a strong lead in performance over other 7200rpm drives.
For instance:
* The Seagate ST9200420AS (200GB, 7200 rpm, 16MB, SATA 300, 5 yr warranty)
* The Hitachi Travelstar 7k200 (200GM, 7200 rpm, 16MB, SATA 150, 3 yr warranty)
The difference between these two is the SATA version, with the Seagate running a faster version of SATA which will not be taken advantage of by the MacBook, however future models or purchases by you may in fact use SATA 300 so it may be a good purchase if you plan to swap it during future upgrades. Further the 5 year warranty over 3 years is nice.
The recommendations above are if you're looking for a lot of storage with maximum performance. If you simply want a large drive with average or stock performance consider the HITACHI Travelstar 5K250 (250GB).

Looking for a samsung scx 4200 driver

Similar Messages

Maybe you are looking for