Looking for a Utility to map error code to error message

Hi All
I am looking for a utility that would map my error codes to corresponding error messages. If you know there such a utility, please point me to it. In addition, I am looking for a utility that would validates input -- eg. length, range of input. Thanks.

In addition, I am looking for a utility that would validates input -- eg. length, range of input. Whatever you do, don't use asserts for this.

Similar Messages

  • Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

    Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
    so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
    I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
    Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
    It think it gives this error message when i reach 24% everytime during export.
    So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
    anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
    Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
    Taphabit

    boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
    NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
    OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
    is there any way of preemptively avoiding it in future projects?
    thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

  • My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available, what should I do?

    My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available (3014), what should I do?

    Try -
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Also see:
    3014
    Restoration of code 3014 will not work?: Apple Support Communities

  • Looking for an app that will alarm on specific text messages.

    Looking for an app that will alarm on specific text messages. The idea is to use the message as a pager without a monthly subscription. There is a similar app for andriod called firealert.

    I could not find any app that would do this. There are different types of message apps but nothing that I could find to do what I am looking for. For a specific contact I would like the message to have a notification that will not go away until I acknowledge it. Just like you would do if it was a pager.

  • TS1292 I bought a 4 pack of $25 Itunes gift cards and only 2 will activate.  For the second two it just keeps asking for my login. No error message just keeps repeating the login

    I bought a 4 pack of $25 Itunes gift cards and only 2 will activate.  For the second two it just keeps asking for my login. No error message just keeps repeating the login.  Is there any way to fix this or did I just lose $50

    Report this here:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Catch mapping error message in BPM Exception branch

    Hi dudes,
    Does anyone know how to catch the mapping runtime error message into a BPM exception branch? I know how to create an exception branch and how to trigger it, but I wonder whether it's possible to pass the mapping error message as shown in SXI_MONITOR (i.e. 'Cannot create target element XXXXX. Values missing in queue context').
    Otherwise, everytime my BPM fails I will have to take the payload and run the mapping test in order to find out the reason of the error.
    Many thanks in advance!
    Paco

    Thanks,
    My problem is not about handling exception in BPM, but getting the mapping error description and then passing it to the exception branch.
    I can see in the workflow log that this info is contained into the Exception container EXCEPTIONS[2] / T100MSG:
    Message Class: SAI_MAPPING
    Message Number: 217
    Message Type: E
    Message Variable: com/sap/xi/tf/_<MM name>
    Message Variable: com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti
    Message Variable: on: Cannot create target element /ns1:<path/field>.Message Variable: Values~
    The text in bold is the one I am interested in to be get and mapped into the exception branch.

  • Every time i tried to download an update for Photoshop, I received an error message U44M1I210. What do I have to do?

    every time i tried to download an update for Photoshop, I received an error message U44M1I210. What do I have to do?

    Creative Cloud Help / Error U44M1I210 | Install updates :
    http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • Key not valid for use in specified state error message

    I did the update for my iPhone and also tried to update iTunes. I kept getting an error message of "key not valid for use in specified state" error message. I thought that if I uninstalled iTunes and re-installed it, that it would be fine. I'm still getting the message and now I don't have iTunes. When my phone updated, I couldn't download anything/backup my phone to iTunes. Please help. Thank you in advance.

    For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
    For further problems installing iTunes see Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Trying to download Photoshop CS3 for Mac but keep getting error message  (HTTP ERROR: 404 /support/downloads/dlm/main.jsp, RequestURI=/support/downloads/dlm/main.jsp)

    Trying to download Photoshop CS3 for Mac but keep getting error message  (HTTP ERROR: 404 /support/downloads/dlm/main.jsp, RequestURI=/support/downloads/dlm/main.jsp)

    Jessicawaters are you trying to download from Download CS3 products?  If so then please try a different web browser.

  • Today, after having published my website without difficulty for years, I got an error message saying that the file format was unrocognized.  Anyone have any suggestions.

    Today,  after having published my website without difficulty for years, I got an error message saying that the file format was unrocognized.  Anyone have any suggestions.

    You need to give some more info.
    How are you publishing your site - iWeb FTP or another application? If the latter, is the encoding set to Unicode (UTF-8)?
    Who is giving you this message - the server?

  • User exit for ME22N in throwing an error message.

    Dear Experts,
    I have a requirement here :
    PO is created, and see it in ME22N ,we see line items. In a line item when we make changes in PO Quantity or value and save it, then Select the line item and Go to -> Environment-> Item changes. It takes to a screen where a new doc no is generated. Whenever we make changes in PO Quantity or value and save and navigate through  Go to -> Environment-> Item changes, it generates a doc number.Similarly,it can generate any no.of doc nos for the changes we make.For each change in line item  ( in PO Quantity or Value ) it generates each doc number.
    My requirement is to restrict the user not to generate more than 3 doc numbers.After 3 doc numbers are generated and user tries to change line item PO or value for another doc no, an error message has to be thrown to stop the user.
    Please guide me in this requirement.
    Thanks in advance.
    Anticipating your early reply.
    Thanks,
    ranisin

    Hi,
    Use change pointers
    Function Modules :
    1) CHANGE_POINTERS_CREATE
    2) CHANGE_POINTERS_READ
    3) CHANGE_POINTERS_STATUS_WRITE
    4) CHANGE_POINTERS_READ_MODE_SET
    5) CHANGE_POINTERS_READ_INFO_GET
    Tables :
    1) BDCP - Change pointer
    2) BDCPS - Change pointer: Status
    3) BDCP2 - Aggregated Change Pointers (BDCP, BDCPS)
    4) CDPOS - Change document items
    5) CDHDR - Change document header
    Tcodes :
    1) BD61 u2013 Activate change pointers.
    2) BD50 u2013 Activate change pointer s for message types.
    Hope this helps you.
    Thanks and Regards,
    Ranjith Nambiar

  • Java.util.EmptyStackException Mapping error

    Hi All,
    I am integrating SAP ECC 6.0 system with SAP SNC.
    For these i am using  standard content of SAP SNC
    I am getting following mapping error :
    TransformerConfigurationException occurred when loading XSLT InvoiceRequest_InvoicInvoic01_01.xsl; details: Could not load stylesheet.com.sap.engine.lib.xml.util.NestedException: Error parsing query. -> java.util.EmptyStackException
    Plz help me out
    Regards Milan

    hi,
    check the interaface mapping which is used in your flow
    inside integration repository - is it working over there?
    do you see the XSL file in the external archives in repository?
    Regards,
    Michal Krawczyk
    http://mypigenie.com XI/PI FAQ

  • Looking for Sync utility like Beyond Compare

    I'm looking for a folder/file synchronization utility like Beyond Compare (which is a Windows-only product). Beyond Compare has a few features that make it outstanding. I know of no Mac synchronization utilitiy that has all of these features:
    1) You can set up compare sessions with individual preferences for each.
    2) The individual preferences includes a list of file/directory names to be ignored.
    3) You can perform a compare and have it display the differences.
    4) I can dispatch file/folder moves individually and instantly.
    5) It can display differences of files (binary or text).
    The 4th item is key. While I'm displaying differences, I only see the differences. It could be dozens or hundreds or thousands of files and folders. If I conclude that folder97 needs to be sync'd to the right, I select the command from a pop-up menu and it syncs to the right and disappears off of my display as it is no longer a difference. As I go through the differences one by one, they disappear off of my screen. This goes on until I have resolved all of the differences.
    Beyond Compare is extremely powerful, flexible and intuitive. It should be a Mac app. I just wish there were something on the Mac like it.

    There is actually. It's called chronosync:
    http://www.econtechnologies.com/pages/cs/chrono_overview.html
    it does everything you listed.

  • Looking for a util to identify "abandoned" mailboxes in Exchange 2007

    I am looking for a (hopefully free or inexpensive) tool to identify mailboxes that are no longer in use and candidates to be pulled and archived.  My exchange admins have not been able to find anything, so I am posting here in case one of you folks
    might have run accross something.  The exchange environment is 2007 SP2.  One fact that might be an issue is that our desktops and user accounts are not in the same AD as the Exchange environment.  Overtime I am sure that we have had many accounts
    removed from the desktop domain, without taking care of the equivalent account in the Exchange domain.

    What I do is use PowerGUI (Free from Quest) and run a Powershell command.  I use Get-Mailbox with the option "Sort-Object
    -property
    'WhenChanged"
    and sort
    the results by date.  This way your using when the last time the mailbox was used.
    Good luck
    To build on SG_Dan's post, this command works for me in 2010:
    Get-mailbox | Select Name, Whencreated, Whenchanged | Sort Whenchanged | Export-CSV c:\InactiveMailboxes.csv
    This will give u all mailboxes in your environment and show you the user, when the mailbox was created and when changed. It will sort by when changed and outputs it to a csv file for you to look at.

  • Disk utility 'input/output error' message?

    I am "creating an image" of a DVD using disk utility (prior to making a copy on a blank DVD disk).   Why am I now rec'ing an 'input/output error' message?   I have already copied several other DVDs from the same author (with her permission, they are not copywrited.) w/o a problem.
    What's going on?  original damaged? an incorrect step on my part?  some sort of space problem?  ( I have tons of room on my iMac.)
    Thanks for your help.

    Take a look at Cinematize 2, I've used it with iMovie 06 and iDVD 08. It has several modes of converting the data. One mode is called "lossless".
    For the job you're doing you may prefer to use iMovie 06 instead of iMovie 08 (I would).
    iMovie 06 and iDVD 08 is a terrific combination.
    Your workflow would go something like this.
    Use Cinematize 2 to create a Quicktime file from the DVD.
    http://www.miraizon.com/products/products.html
    Important that file into iMovie 06.
    From iMovie 06, share to iDVD 08 (assuming you want a DVD).

Maybe you are looking for