LOOKING FOR: Auto BPM counter (no tap)

Hello there,
I'm looking for an app which can hear the Beats Per Minute (bpm) of a song and automatically calculate them, WITHOUT the use of a touch-screen tapper.
Do you know any ?
Thanks in advance!
- Tyrexionibus

Yesssss
All apps I've found with "BPM counter"; "AUTO BPM", or just "BPM" are all tap ones.

Similar Messages

Looking for longlife storage solution - is tape still an option?

hi there,
im looking for a long life and very safe way for backing up 6 TB of data.
is the magnetic tape option reliable? or what would u suggest to go for?
thx
manuel

Tape is still very much a viable option, and is used regularly to backup petabytes of data on a daily basis.
At that capacity there are basically three different formats to consider, AIT (developed by Sony), LTO (from IBM/HP), and SDLT (from Quantum).
Of the three, LTO offers the highest speed and tape capacity with an LTO3 tape holding 400GB native (800GB at 2:1 compression) and a speed of 80MB/sec.
Behind that comes SDLT-II at 300GB per tape and 36MB/sec (the newer, bleeding-edge SDLT-III drives run 800GB per tape at 60MB/sec).
Trailing the list comes AIT at 200GB per tape and 24MB/sec.
Clearly, to manage terabytes of storage you need more than one tape, which is where autoloaders and libraries come into play - a chassis that contains multiple tapes and some robotic mechanism that transports the tapes from their storage bin to the tape drive mechanism itself. Larger units support multiple drive units in the box and potentially hundreds or thousands of tapes.
As for interface, SCSI is the predominant interface for tape backup, although Fiber Channel is sometimes an option.
There are FireWire options, too, but this is unlikely to be viable for your volume of data.
As for vendors, consider Quantum, Overland, Exabyte and ADIC.
Of the vendors mentioned, ADIC are probably the best at the high-end with Overland my preferred mid-level systems, and Exabyte at the lower end.
You should look at your data to decide a backup strategy before you go much further, though. Even though you have 6TB of data, you may find that once you have that backed up you only have a few hundred megabytes or gigabytes of data that changes frequently. Any decent backup software system will manage this for you, taking some of the pain out of knowing which tapes are needed when it comes to restore.
On that basis you may be able to leverage a lower-end tape library to manage the smaller amount of daily backup load rather than a 10TB monster capable of backing up your entire data set in an hour.
Also, when it comes to backup strategies, consider the value of a disk-to-disk-to-tape system (D2D2T). These systems backup data very quickly to disk-based storage and then backup the disk-backup to tape. This reduces the time it takes to backup the critical data and also means that recent changes can also be restored from disk, without the overhead of loading the correct tape and reading the data from there.

Looking for way to count a specific document hits(Not with Activity Report)

Hello,
I have a certain Word document that I want to count how many users opened it. I am aware of the Portal Activity Report but this report tracks only iViews/pages ect. and my document is inside a KM iView which contains many other documents and I want to count just that specific Word document.
Is there a KM property that can be created or a service that can be applied in order to count this document's hits by users?
Message was edited by: Roy Cohen

I have created a repository service which count document hits using a custom property defined.
We are using NW04SP12.
This is our code:
========================================
package com.hesa;
import java.util.Collection;
import java.util.Iterator;
import com.sapportals.wcm.WcmException;
import com.sapportals.wcm.crt.component.IReconfigurable;
import com.sapportals.wcm.crt.component.StartupException;
import com.sapportals.wcm.crt.configuration.ConfigurationException;
import com.sapportals.wcm.crt.configuration.IConfiguration;
import com.sapportals.wcm.repository.IProperty;
import com.sapportals.wcm.repository.IResource;
import com.sapportals.wcm.repository.Property;
import com.sapportals.wcm.repository.PropertyName;
import com.sapportals.wcm.repository.ResourceException;
import com.sapportals.wcm.repository.manager.IRepositoryManager;
import com.sapportals.wcm.repository.manager.IResourceEvent;
import com.sapportals.wcm.repository.manager.IResourceEventReceiver;
import com.sapportals.wcm.repository.manager.ResourceEvent;
import com.sapportals.wcm.repository.service.AbstractRepositoryService;
import com.sapportals.wcm.repository.service.ServiceNotAvailableException;
import com.sapportals.wcm.util.events.IEvent;
public class SampleService extends AbstractRepositoryService implements IResourceEventReceiver, IReconfigurable {
private static final String TYPE = "com.hesa.kmtest.SampleService";
private Collection repositoryManagers;
public SampleService() {
     super();
public String getServiceType() {
     return SampleService.TYPE;
protected void startUpImpl(Collection repositoryManagers) throws ConfigurationException, StartupException {
     this.repositoryManagers = repositoryManagers;
     Iterator it = repositoryManagers.iterator();
     while (it.hasNext()){
       try {
          addRepositoryAssignment((IRepositoryManager) it.next());
       } catch (ServiceNotAvailableException e) {
          e.printStackTrace();
protected void shutDownImpl() {
     Iterator it = repositoryManagers.iterator();
     while (it.hasNext()){
       try {
          removeRepositoryAssignment((IRepositoryManager) it.next());
       } catch (WcmException e) {
          e.printStackTrace();
protected void addRepositoryAssignment(IRepositoryManager mgr) throws ServiceNotAvailableException {
     try {
       mgr.getEventBroker().register(this, ResourceEvent.GET_TEMPLATE);
     } catch (WcmException e) {
       e.printStackTrace();
protected void removeRepositoryAssignment(IRepositoryManager mgr) throws WcmException {
     mgr.getEventBroker().unregister(this, ResourceEvent.GET_TEMPLATE);
public void received(IEvent event) {
     IResourceEvent myEvent = (IResourceEvent) event;
     try {
       IResource res = myEvent.getResource();
       PropertyName propertyNameHitCount = new PropertyName("http://sapportals.com/xmlns/cm","hitcount");
       Property propHitCount = new Property(propertyNameHitCount,new Integer(0));
       if (res.getProperty(propertyNameHitCount)!=null) {
            IProperty oldHitCount = res.getProperty(propertyNameHitCount);
            String sOldHitCount = oldHitCount.getValueAsString();
            int iOldHitCount = Integer.parseInt(sOldHitCount);
            iOldHitCount++;
          propHitCount = new Property(propertyNameHitCount,new Integer(iOldHitCount));
          res.setProperty(propHitCount);
     } catch (ResourceException e) {
       e.printStackTrace();
public void reconfigure(IConfiguration arg0) throws ConfigurationException {
========================================
Remember, you must activate this service in the correct repository (System administration -> System configuration -> Knowledge Management -> Content Management -> Repository Managers -> CM Repository).
These changes requires that you restart the server.
I think this could help you.

For all those looking for auto-tune software ...

Found this shareware called VoiceTweaker that has pitch correction, pitch shifting and some other features. For PowerPC Macs only at this time - maybe someone with an older machine can try it and report back if it's better than GB's built-in features.
The price is 99 $, I wasn't able to find out what the limitations of the trial version are.

I'm very familiar with satellite Internet. (Depending on the plan you get) your right it can be very fast. 4 major problems with satellite IP (1) Your caped in data (2) VOIP is pretty much impossible to use with 10 second delays or more. (3) weather (4) VPN.
If you have 4g LTE in your area go with a hot spot or Verizon's home fusion ( not sure if that's the name). However I would stick with a 1.5 meg line over cell or satellite Internet. Sure you can stream in HD, and download large files fast with satellite. But I've seen people go through their hole month a data in four days or less (20gigs). Then they slow your speed down (throttle) you and make you pay $15 per gig after you have used your data up.
If your just a web browser and occasionally you tube watcher it might be perfect for you.

Looking for BPM Enterprise Edition architecture Diagram

I am looking for a BPM Enterprise Edition architecture Diagram showing how all the pieces (e.g. BPM, Oracle DB, LDAP directory, WebLogic server, Application server etc.) fit together . If it is available on the internet, can you please let me know the URL ?
Thanks in advance.

I have several diagrams you could use but can't paste it in. The product docs on oracle.com have some but if you need something else maybe I can help. I do not publish my email on this site so we would have to find another channel to communicate.
Cheers,
IGS

BPM counter script

just needed a manual bpm counter, partially to practice perl, but also cuz i dont like the audacity auto bpm counter. I like to manually click to the beat... but thats just me.
It works, but the output isnt rly pretty. should i print another line that just displays the instantaneous bpm (between the two most recent clicks) or would that just be to much info? In my opinion i think the avg bpm is all ya need, and if you screw your bpm up by missing a few beats just rerun the app.
#! usr/bin/perl
#Beat Counter Program
#By William Gur
#2010
use strict;
use warnings;
use Time::HiRes;
use 5.010;
sub timediff{
state @time;
state $total_time;
state $focus_element;
my $timeval=$_[0];
my $returnval;
#return time elaped in mins. ex: .35 mins
#use state to keep value between calls
push @time, $timeval;
if(!defined($total_time)){
$total_time=0;
if(!defined($focus_element)){
$focus_element=0;
if($focus_element>=1){
$total_time=($total_time+($time[$focus_element]-$time[($focus_element-1)]));
$returnval=($total_time/60);
$focus_element+=1;
return $returnval;
else{
$focus_element+=1;
return 1;
print "hit the return button to the beat!\n";
print "press any other key to exit\n";
my $input="", my $counter=0, my $time_now, my $time_elapsed=1;
#get the local time as a start val so you know how long has passed
#in total... compare that to number of clicks so far. get average bpm from this data.
while($input eq ""){
$input=<STDIN>;
chomp($input);
$time_now = Time::HiRes::time();
$time_elapsed = &timediff($time_now);
if($time_elapsed != 0 && $counter != 0){
print $counter/$time_elapsed;
print " avg bpm";
$counter+=1;
print "\ngoodbye\n";
Comes in handy covering songs

Not exactly what you are looking to do, but check out the following:
1) You can see and adjust tempo and time signature from the large transport bar.
2) You can add another tempo view to your arrange window by choosing VIEW→GLOBAL TRACK COMPONENTS→TEMPO from the pull down menu in the arrange window.
3) You can also get a window with a list of tempo and time signatures used in a song by choosing OPTIONS→TEMPO→TEMPO LIST from the main menu bar.
Any of this help?

HT204266 looking for the old Netflix app that will work on original Ipad with ios 5.1.1

looking for the old Netflix app that will work on original Ipad with ios 5.1.1

Netflix does in fact have the old version of their app available.
In iTunes on your computer, download the App you want a compatible version for using the same Apple Id that the iPad has for the App Store. For Paid Apps its best to consult with the App maker to make sure there is a compatible App. With the App Downloaded to iTunes on a computer you can go into The App Store App on your iPad, Tap on Purchased, and Look for the App there. Tap on it to begin the download. It will likely say its not compatible, but if there is a compatible version it will offer to download it. Install the latest compatible version of an app on an earlier version of iOS or OS X

HT201263 my iphone5 does not have passcode setting option. this is for auto-lock function

my iphone5 does not have passcode setting option. this is for auto-lock function

Hello SLLH
You can find the settings for the Passcode Lock in Settings > General > Passcode Lock. If you are looking for Auto-Lock, then go to Settings > General > Auto-Lock. If you are not seeing these options then you may need to do a reset settings on your iPhone, which is located at General > Settings >Reset > Reset All Settings.
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Looking for a TAP (Telelocator Alphanumeric Protocol) replacement?

Looking for a TAP (Telelocator Alphanumeric Protocol) replacement?
We can help with our cloud TAP service.
1. Quick setup
2. Great customer support
3. 40% cheaper
4. Ability to send 10's of thousands of messages
5. Works in WiFi and in all mobile networks via SMS test or mobile App
Check out http://developer.telemessage.com/tap-to-mobile-text-sms/

TeleMessage offers TAP-to-Text pager replacement.
Check out http://developer.telemessage.com/tap-to-mobile-text-sms/

Looking fora camcorder that also has an s-video or rca jack input to convert my vhs tapes to digital

looking fora camcorder that also has an s-video or rca jack input to convert my vhs tapes to digital.

Hi ltcps,
Thanks for writing us!
None of Canon's current camcorders include S-Videos, RCA or other auxiliary inputs.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

Thank you for the help, have sorted it through Restrictions in General settings now : )
No more mysterious app purchases on my c.card now thank god !!
You would think they would set as default that Password was required - Imediatly . But they know there likely to get more purchases the way the default set it..
Thanks again for prompt reply!!!

Looking for an elegant dual monitor auto-configure solution (SOLVED)

I am currently using XFCE becuase Gnome and KDE are both too heavy for my weak little laptop with intel onboard graphics. The number one thing I miss is auto-detect and configuration when I plug or unplug my monitor.
I can't find anything that works automatically in an elegant way, the only thing I can do is poll the system every second. There appears to be a way to make a udev rule but that is a little bit out of my depth.
My current solution is below, does anybody have a suggestion for something more elegant? It would be awesome if there was something in the AUR.
#!/bin/bash
#inspired of:
# http://unix.stackexchange.com/questions/4489/a-tool-for-automatically-applying-randr-configuration-when-external-display-is-p
# http://ozlabs.org/~jk/docs/mergefb/
dmode="$(cat /sys/class/drm/card0-VGA-1/status)"
export DISPLAY=:0
export XAUTHORITY=~/.Xauthority
# actual script
while true
do
if [ "${dmode}" = disconnected ]; then
/usr/bin/xrandr --auto
elif [ "${dmode}" = connected ];then
/usr/bin/xrandr --output VGA1 --auto --right-of LVDS1
else /usr/bin/xrandr --auto
fi
sleep 1s
done
SOLVED using inotify see below and thanks for all the help
#!/bin/bash
#inspired of:
# http://unix.stackexchange.com/questions/4489/a-tool-for-automatically-applying-randr-configuration-when-external-display-is-p
# http://ozlabs.org/~jk/docs/mergefb/
# http://superuser.com/questions/181517/how-to-execute-a-command-whenever-a-file-changes/181543#181543
export MONITOR2=/sys/class/drm/card0-VGA-1/status
while inotifywait -e modify,create,delete,open,close,close_write,access $MONITOR2;
dmode="$(cat $MONITOR2)"
do
if [ "${dmode}" = disconnected ]; then
/usr/bin/xrandr --auto
echo "${dmode}"
elif [ "${dmode}" = connected ];then
/usr/bin/xrandr --output VGA1 --auto --right-of LVDS1
echo "${dmode}"
else /usr/bin/xrandr --auto
echo "${dmode}"
fi
done
Last edited by originalsurfmex (2013-10-28 20:51:45)

Thanks very much for pointing me to inotify. This is exactly the type of solution I was looking for! I wasn't too excited about creating some udev tool. Here is the script using inotify:
#!/bin/bash
#inspired of:
# http://unix.stackexchange.com/questions/4489/a-tool-for-automatically-applying-randr-configuration-when-external-display-is-p
# http://ozlabs.org/~jk/docs/mergefb/
# http://superuser.com/questions/181517/how-to-execute-a-command-whenever-a-file-changes/181543#181543
export MONITOR2=/sys/class/drm/card0-VGA-1/status
while inotifywait -e modify,create,delete,open,close,close_write,access $MONITOR2;
dmode="$(cat $MONITOR2)"
do
if [ "${dmode}" = disconnected ]; then
/usr/bin/xrandr --auto
echo "${dmode}"
elif [ "${dmode}" = connected ];then
/usr/bin/xrandr --output VGA1 --auto --right-of LVDS1
echo "${dmode}"
else /usr/bin/xrandr --auto
echo "${dmode}"
fi
done
I am marking this as solved. If you have more critique or suggestions I'd be open to improve the script.

Looking for script to auto resize images

I have a commerce site and we have 3 sizes of images thumb
nail, standard
and fullsize. Ideally I'd like to maintain just one image
folder so I don't
have to keep synching and batch resizing.
I'm looking for a script that would resample/resize images on
the fly so I
only have to maintain one directory. Does anyone know of such
a script? It
doesn't have to be free.
Thanks

.oO(robbie)
>I have a commerce site and we have 3 sizes of images
thumb nail, standard
>and fullsize. Ideally I'd like to maintain just one image
folder so I don't
>have to keep synching and batch resizing.
>
>I'm looking for a script that would resample/resize
images on the fly so I
>only have to maintain one directory. Does anyone know of
such a script? It
>doesn't have to be free.
What language? With PHP for example it's quite easy using the
GD
functions.
Another way would be to use an external software. I prefer
Paint Shop
Pro for all image-related stuff. Things like creation of
thumbnails in
different sizes can easily be automated by using its own
scripting
language (based on Python).
Micha

HT201250 I had turned off the time machine auto back up and now when I try to turn it back on it keeps looking for a disk even though the time capsule is shown, do I have to set it up again as an initial?

I have been using the time capsule to back up both my iMac and recently added MacAir, it has been working fine but recentlky I had turned the time machine off on the Macair and now when I try to turn it back on it keeps looking for a disk even if I select the time capsule. Do I have to start the backup for the Macair as a new backup?

That happened to my brother earlier. He went into Facebooand then into another app and the same thing happened. he ended up having to restore it. Mine stayed with the Apple logo for a bit but its back to normal after pressing the buttons a million times. I hope you get your problem sorted. Goodluck!

N8, Looking for Apps, GPS which will send sms auto...

Hi there guys, I´m looking for a Apps, wich will send my location automatically every for example 10 minutes ?
I have to admitt I do not find it easy to find apps on Ovi Store
Solved!
Go to Solution.

It isn't quite what you are looking for as it uploads location data to a website rather than sending sms but you could have a look at phonelocator periodic http://store.ovi.com/content/25892
Searching the store using "phone locator " doesn't, as far as I can see, come up with anything closer to what you want but you could have look using that as the search.
Not sure if an app sending so many sms messages would appeal to me, but I live in a country where operators interpret "unlimited " as xx messages per month.
N8-00 pc059C9F6 Belle
808 PureView pc059P6W5

LOOKING FOR: Auto BPM counter (no tap)

Similar Messages

Maybe you are looking for