Looking for Data Rates for Apple AIC vs DV...

I've been looking around for a chart that compares the storage needed for an hour of AIC at the various qualities.
I found this: http://support.apple.com/kb/HT2704   Please point me to the place of AIC Knowledge.
Thanx from Rosco

reading and writing the data shouldn't be the problem, its what you are doing with the data which will be taking all the time.
Try this
public class WriteFile {
    public static void main(String... args) throws IOException {
        String filename = "record.csv";
        int records = 140 * 1000;
        int values = 6;
            long start = System.nanoTime();
            PrintWriter pw = new PrintWriter(new BufferedWriter(new FileWriter(filename)));
            for (int r = 0; r < records; r++) {
                for (int i = 0; i < values; i++) {
                    if (i > 0)
                        pw.print(',');
                    pw.print(r * 10 + i);
                pw.println();
            pw.close();
            long time = System.nanoTime() - start;
            System.out.printf("Time to write %,d records was %.3f sec. file size=%.3fMB%n",
                    records, time / 1e9, new File(filename).length() / 1e6);
            long start = System.nanoTime();
            BufferedReader br = new BufferedReader(new FileReader(filename));
            String line;
            while ((line = br.readLine()) != null) {
                // do some work.
                String[] parts = line.split(",");
                int[] nums = new int[parts.length];
                for (int i = 0; i < parts.length; i++)
                    nums[i] = Integer.parseInt(parts);
br.close();
long time = System.nanoTime() - start;
System.out.printf("Time to read %,d records was %.3f sec%n",
records, time / 1e9);
PrintsTime to write 140,000 records was 0.462 sec. file size=6.193MB
Time to read 140,000 records was 0.792 sec

Similar Messages

  • How do you fix error message "data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".

    When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".  We need help to correct this so we can complete burning to DVD. 

    What did you export from Premiere?
    Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • Asking for data connectivity for settings and Photo gallaery. Why?

    Asking for data connectivity for settings and Photo gallaery. Why?

    sounds good to me. suggest it here!
    apple.com/feedback

  • Function Module for data retrival for work order clearence (WCA)

    Hi All ,
      Function Module for data retrival for work order clearence (WCA) for a particular Planning plant and (WCD's).
    Thanks.

    Hi Anne,
    BAPI_PRODORD_GET_DETAIL
    BAPI_PRODORD_GET_LIST
    You can find further FM in Function Group COPRINT and CODR or take F4 on CO* in Function Group
    These will serve your purpose.
    Cheerz.
    Ram

  • Best Data Rate for Export to DVD as Quicktime Movie

    Hello - hope someone out there can help me!!!
    I put together a slideshow for my high school reunion using iMovie HD 5.0.2 and need help with settings exporting it as a Quicktime movie.
    *I want to export it to a DVD* so that I can play it on a friend's laptop and I'm not sure if iDVD would be the way to go - my friend has a Macbook Pro I can borrow so it might be okay - I am worried about the fact that I've been working on older software. (I have read about opening iDVD and bringing in iMovie project vs. "share to iDVD"). So they suggested instead of iDVD I just export as a quicktime. Then I can burn it in Toast (v.6.0.2)
    Wondering about *BEST DATA RATE?*
    In export settings I have:
    compressor set at H.264
    frame rate: current (should that be DV-NTSC?)
    key frames: automatic (?)
    encoding: best quality/multi-pass
    should data rate be automatic?
    Some details that might be relevant to helping me:
    *Stills brought in as clips with cross-dissolves, only two uses of "Ken Burns effect"
    *Some stills were in the project from my LAST reunion - I realize I should have reimported all the stills since I am now recompressing them, but it's too late now!
    *no audio
    *Slideshow is about 45 mins long, file size says 5.52GB although when I looked into exporting it last night it said 9+GB - not sure why
    *Using a G4 Tower (not my ancient laptop) with OS 10.4.11, Dual 533MHz PowerPC, 1.5GB SDRAM
    iDVD version is 6.0.4
    please help if you can!! thank you in advance...

    Are you trying to burn a standard DVD or are you trying to put a QuickTime .mov file on DVD media?
    A standard DVD doesn't worry about file size (only the duration).
    A "data" DVD is limited to the type of media used. A single layer DVD is about 3.7 GB's.
    In order to make a data DVD you need to keep the data rate low enough to not exceed the DVD media playback abilities. They can't handle the higher rates found in many of the preset options.
    You can avoid all of these headaches by telling the viewer to "copy" the .mov file from the DVD to their Desktop. Then nearly any of the presets option will work.
    H.264 is a great video codec and the "automatic" preset should work just fine. Use "multi-pass" for best quality (takes a very long time). Remove the check mark for "Audio" since your file has none. Leave it checked and you waste file size because a silent audio track would be added.

  • Missing: Bluetooth with Enhanced Data Rate for vista

    I was looking for the "Bluetooth with Enhanced Data Rate Software II" for vista
    After I found the right page (http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-67250), it seem their is no link to the setup file
    Any ideas?

    glev55's link to the x6x Vista drivers is also fixed now.
    Thanks to whoever reported it through Site Feedback!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Lower Data Rates for VoWLAN

    When I take a look in the deployment guides I could see that I should not use data rates in the 802.11a network below 12mbit. We do not expect more than 6 calls and 8 phones on one access point but would like to raise the coverage by using 6mbit data rate. We could not place more access points. Is there someone with experience using lower data rates?
    Using:1252 Access Points and WISM Controller

    Allowing speeds from 6 Mbps can technically work, but the recommendation is also to avoid retries... the larger your cell, the more chances you have to have multipath issues making packets fail. With a voice deployment, if you have more than 1 % error rate, your MOS degrades below 4.1 (the quality of the call is affected and users start complaining that voice conversation is unstable, choppy etc).
    So allowing 6 Mbps is fine, but the result will depend on the quality of your RF environment...
    hope it helps
    Jerome

  • Suggestions for bit rate for books on cd

    Hi
    I'm trying to clear some room on my ipod. Thus far I've been importing everything at 192. I'm hoping to reimport some of the books on cd that I've put on and would like some suggestions as to how low of a bit rate I can use without affecting sound quality too much (I tried 96 and really couldn't tell the difference).
    Thanks
    Evelyn

    Hi, Evelyn.
    For spoken word recordings, 32 kbps is generally considered an acceptable setting.
    And, for what it's worth, that's the Bit Rate for Audiobooks purchased from the iTunes Store.
    EDIT: You may also want to have a look at these suggestions: Link

  • Translate not working for Budget rate for different scenarios

    I have created 2 new scenarios and the custom4 exchange rates is only working for [None] but not for BUDR, BUDRPY, or CONR.
    I can't see anything obvious within the translate rule that affects these new scenarios.
    '     =========================
    '      (25) Translation
    '     =========================
    Sub Translate()
         Dim strYear,aC2,aC3,aC4,aC5,aC6,opinp,curr,svt16,op,fxinp
         strYear = HS.Year.Member()
              aC2 = HS.Custom2.List("MVMT_EQ","[Base]")
              aC3 = HS.Custom2.List("MVMT_IFA","[Base]")
              'aC4 = HS.Custom2.List("MVMT_IFA_DEPN","[Base]")
              aC5 = HS.Custom2.List("MVMT_MASTER","[Base]")
              aC6 = HS.Custom2.List("MVMT_INVEST","[Base]")
              opinp = ".C2#OPBAL_INP.C4#[None]"
              curr = ".C4#[None]"
              svt16 =     ".C2#MVT1600.C4#[None]"
              op = ".C2#OPBAL.C4#[None]"
              fxinp = ".C2#FXINPUT.C4#[None]"
    HS.Trans "C4#BUDR", "", "A#BUDR", ""                                             
    HS.Trans "C4#BUDRPY", "", "A#BUDRPY", ""                                        
    HS.Trans "C4#CONR", "", "A#CONR", ""
    Both these new scenarios are setup the same as our main Actual scenario as YTD for data input.
    We do expand on the translation rule for specific C2 balances for just the Actual scenario for the various balance sheet sections like Equity, Investments to apply specific exch rates for OPE and movements but this should not affect these new scenarios I would not have thought.
    Grateful for any assistance.
    Thanks
    LG
    I found another rule that could be where my problem stems from: - halfway down it refers to Budget and Forecast scenarios and my new scenarios are Cashflow and Strategy so do I have to add them here??
    Sub copyC4None()
         'Debug
         If Debug = True then
              Writetxt("Debug," & HS.Entity.Member() & ",CopyC4None sub-routine started")
         End If
         'Copy all data for conversion to Budget rates
         dim strReviewStatus,strScenario,strYear,strPeriod,strEntityDefCurrency,strEntity,strView,strDataUnit,myDataUnit,lNumItems,i,lAccount,lICP,lCustom1,lCustom2
         dim lCustom3,lCustom4,dData,strCustom4,lC4Dest,strAccC4Top,sAccount
         strScenario=HS.Scenario.Member()
         strPeriod=HS.Period.Member()
         strYear=HS.Year.Member()
         strEntity=HS.Entity.Member()
         strReviewStatus = HS.ReviewStatus("")
    ' Copy Entity Currency to Entity Currency and Entity Curr Adj to Entity Curr Adj on the alternate translation members
              'strDataUnit = "C4#[None].V#<Entity Curr Total>"
              Select Case lcase(Left(strScenario, 6))
              Case "budget", "forecast", "budget_final"
                   strDataUnit = "W#YTD.C4#[None]" ' changed by sarav on 29-05-2008 from W#Periodic to W#YTD
              Case Else
                   'strDataUnit = "C4#[None].V#<Entity Curr Total>"
                   strDataUnit = "C4#[None]"
              End Select
              SET MyDataUnit = HS.OpenDataUnit(strDataUnit)
    lNumItems = MyDataUnit.GetNumItems
              IF strScenario <> "" THEN
    For i = 0 To lNumItems - 1
         Call MyDataUnit.GetItemIDs2(i, lAccount, lICP, lCustom1, lCustom2, lCustom3, lCustom4, dData)
                             sAccount = HS.Account.MemberFromID(lAccount)
                             sAccountUD1 = Left(HS.Account.UD1(sAccount),2)
                             strAccC4Top = HS.Account.C4Top(sAccount)
                             If strAccC4Top = "TotalCustom4" And sAccountUD1 = "TB" Then
                                  For Each strCustom4 In HS.Custom4.List("EXCHANGE", "[Base]")
                   If strCustom4 <> "[None]" Then
                   lC4Dest = HS.Custom4.IDFromMember(strCustom4)
              Call HS.SetData(0, lAccount, lICP, lCustom1, lCustom2, lCustom3, lC4Dest, dData, False)
              End If
              Next
                             End If
                        'End If
    Next
              END IF
    Edited by: jamdom on Aug 3, 2011 11:42 PM

    I have worked it out - the first issue was the scenarios in the Select Case were not all stated nor were they 6 characters in length
    Select Case lcase(Left(strScenario, 6))
    Case "budget", "forecast", "budget_final"
    now Case "Budget", "Foreca", "Cashfl", "Strate", "Actual"
    The second issue was the account list in UD1 - I had to amend the member list to include these new accounts, then in the metadata tag the UD1 for these codes then amend the sAccountUD1 to include this new list
    sAccount = HS.Account.MemberFromID(lAccount)
    sAccountUD1 = Left(HS.Account.UD1(sAccount),2)
    strAccC4Top = HS.Account.C4Top(sAccount)
    If strAccC4Top = "TotalCustom4" And sAccountUD1 = "TB" Then
    now If strAccC4Top = "TotalCustom4" And sAccountUD1 = "TB" or sAccountUD1 = "CF" Then
    and it works!! Yeh!!
    LG

  • Time Machine - Mac Pro - 4 Drives, 2 for data, 2 for TM Backup?

    Here's the scenario,
    Mac Pro with 4 drives. I'd like to have 2 of the drives for my data, OS, etc, and the other 2 for Time Machine backups.
    Assuming the following,
    Drive 1 (750GB), back up to Drive 2 (1TB)
    Drive 3 (750GB), back up to drive 4 (1TB)
    Is it possible to use Time Machine to simultaneously back up two different drives on one machine to two other drives?
    Yes, I know part of the reason for a back up is to store it off line, off site, etc... My main reason to use TM is to recover any data that might have changes, been thrown out, or to recover a failed drive, and though I could use RAID for the recover drive scenario, I think I like the idea of using TM.
    Thanks

    Yes, you could but I would not recommend using a RAID as a startup volume. That's not what RAIDs are for.
    If you want greater control over backups then TM isn't the way to go. Here are some backup programs better suited to the job:
    Backup Software Recommendations
    My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    8. Intego Personal Backup (Commercial)
    9. Data Backup (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two. In some respects Backup is similar to Time Machine.

  • Regarding web analysis not responding for data export for a report

    Hi all,
    Iam new to web analysis we had a issue on one of the report
    I can open the report and i can work perfectly on the report but when i export the data to excel its showing up as fallowing error
    FATAL ERROR: gui report is inccorect
    In the same application i have some other reports those are working fine and data is being exported to excel for those reports
    What might be going with that report Please let me know if you have any ideas.
    Thanks,
    Ramesh
    Edited by: KRK on Aug 26, 2009 11:46 AM
    Edited by: KRK on Sep 14, 2009 2:33 PM

    As report was exceding 65000 records we have modified the report by adding the pages and reduced the count of output records. So the issue was resolved.

  • Best practice for data persistance for monitoring without BAM

    Greetings,
    We are modeling a business process in a large organization using BPEL Process Manager. The key point is that business people needs to monitor the execution of the business process in several key sectors of the process execution as well as they need to get report information of the process.
    To model this in our project, we decided to create a new Oracle Database Schema that is going to hold the information about the business process execution (we decided that because for this initial offering the customer is not buying BAM). In this context, the BPEL process is going to be sending this key information to the repository so business people can then view real time information about the process execution as well as historical information in form of reports.
    The important issue here is, if there is a best practice to send the information to the Database Schema ? it could be just using single database adapters ? maybe using sensors sending the data using topics connections ?
    Any help will be highly appreciated.
    Thanks in advance.

    hi..yes this suggestion is nice...first configure the sensors(activity or variable) ..then configure the sensor action as a JMS Topic which will in turn insert the data into a DB..Or when u configure the sensor action as a DB..then the data goes to Oracle Reports schema..if there is any chance of altering the DB..i mean if there is any chance by changing config files so that the data doesnt go to that Reports schema and goes to a custom schema created by any User....i dont know if it can b done...my problem is wen i m configuring the jms Topic for sensor actions..i see blank data coming..for sm reason or the other the data is not getting posted ...i have used a esb ..a routing service based on the schema which i am monitoring...can any1 help?

  • Customer exit variable for date range for the last day

    Hi,
    If user enters date ranges in variable
    suppose user enters 9/1/2010 to 9/15/2010 and we have to calculate currency conversion based on last day i..e 9/15/2010 . 08
    2)User input is date range 08/01/2010 to 08/30/2010
    I need from the customer exit 08/30/2010 (on last day) to calculate currency conversion.
    Can anyone help me with ABAP code to achieve this customer exit?And please tell me how to proceed step by step
    Sridhar

    create a variable to enter date range (ZDATE1)
    create a key date variable(ZDATE2) with processing type customer exit, should not be ready for input.
    In the exit ZXRSRU01 write below code.
    DATA: l_s_range TYPE rsr_s_rangesid,
          loc_var_range LIKE rrrangeexit.
    WHEN 'ZDATE2'.
        IF i_step = 2.
           read table i_t_var_range INTO loc_var_range
                    with key vnam = 'ZDATE1'.
            CLEAR l_s_range.
            l_s_range-low = loc_var_range-high.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            APPEND l_s_range TO e_t_range.
        ENDIF.

  • Increase of work processes for data transfer for specific tables

    Hi,
    We are using TDMS for transfer of around 1 month's data from our ECC Quality system to ECC test system. The test system was built using shell creation and the transfer started.
    We have allocated 13 batch processes in the central system and reciever system. There are currently two tables for which transfer is running. The transfer is completed for all other tables. But eventhough there are 13 processes available, there are only 3 processes allocated to one table and 2 processes allocated to another table for transfer.
    Since the time is dependent on the complete transfer of these two tables and since there are 8 free processes available, we would like to assign the remaining processes on these tables so that the transfer is faster.
    Please guide me if there is any way to change the same.
    Regards,
    Ragav

    Hi,
    Thanks to Sandeep and Pankaj for the replies.
    I've started data transfer in CRM landscape and in that i was able to define the read method, write method and change some technical settings for transfer.
    In the Technical settings for transfer option, i was able to increase the parallel transfer batch processes to be run in parallel.
    Regards,
    Ragav

  • Making powermac G4 MDD for data center for small office server

    Hi mac expert,
    i had a small office which need to pool every data audio and metadatas ( wav, mp3, flac, mp4, mov, ms office xls, docs, jpeg, tiff ) into 1 place or hard disk that can be access from any macs and pcs in the same office.
    i have 2 units G4 1Ghz MDD (bus speed 133mhz, both has 2 gb of RAM, a 120 gb of HD internal installed.
    i upgrade one of those with DP 1,42ghz and 2TB of SATA hard disk that attached to PCI SATA Sonnet card.
    installed mac osx 10.5.8 leopard.
    airport extreem card installed.
    my questions:
    - How big a hard drive can I get? I installed a 2TB drive with no partion, but sometimes when i open the disk it gave me spinning cursor and it show no items on that drive, got freeze and can not turn of by shutdown menu, i have to press the power button of the mac itself.
    - if i want to make a data center like what i mention above using powermac G4 that i had, what should i do?
    - should i install leopard server os?
    thank you so much.

    MacDrive may work, also see if these are still avaiable...
    NTFS-3G Stable Read/Write Driver...
    http://www.ntfs-3g.org/
    MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
    http://www.osnews.com/story/16930
    MacDrive for the PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/

Maybe you are looking for