Looking for SampleProject-1013x.zip

Hi everyone,
This file is referenced in the WCI ui customization guide, but I can't find it. Does anyone have it or know where it is?
Thank you!
Pattie

Hi user7608416,
Not absolutely sure.. but, You might want to start here:
https://codesamples.samplecode.oracle.com/
Cheers!!

Similar Messages

Installing ZRS looking for zrs-resource.zip

First time installing Zenworks Reporting --
A bullet point from the Novell Zenworks 11 Documentation :https://www.novell.com/documentation...a/bb1nakx.html
"zrs-resource.zip: Download the ZENworks resource file from from Novell Web site for ZENworks Reporting 5. This contains domain and reports for ZENworks Configuration Management 11.2.4."
I haven't been able to locate this zip file. Can anyone send me down the correct path?
Thanks in advance
Scott Shumway
[email protected]

http://download.novell.com/Download?...d=BIHocOn-bgA~
Same place you download the 11SP2 ISO.
On 6/26/2014 7:16 PM, shumways wrote:
>
> First time installing Zenworks Reporting --
>
> A bullet point from the Novell Zenworks 11 Documentation
> :https://www.novell.com/documentation...a/bb1nakx.html
>
> "zrs-resource.zip: Download the ZENworks resource file from from Novell
> Web site for ZENworks Reporting 5. This contains domain and reports for
> ZENworks Configuration Management 11.2.4."
>
> I haven't been able to locate this zip file. Can anyone send me down
> the correct path?
>
> Thanks in advance
> Scott Shumway
> [email protected]
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Looking for aspxmps115 . zip file

Hi. I'm looking for the aspxmps115 . zip file that contains samples for version 11.5
I found two documents that mention aspxmps115 . zip file but none of them have a link to the file that works.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30bedd67-5f1e-2b10-1bb8-c710ec9ca50a
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313339333433373330%7D.do
Does anyone know where I can download .zip file?
Thanks

Hello Yurii,
These samples are located on the Business Objects Download page. Start from the Business Objects link above in horizontal menu bar, then click the Business Objects Download link on the left after that page loads.
Once you get to the Business Objects Download page set the search criteria to these values:
Software Product - Crystal Reports
Product Version - XI Release 2
Software Type - Sample
After searching look for the "[RDC ASP Samples for CR XI R2 (Developer Edition only)|https://smpdl.sap-ag.de/~sapidp/012002523100005919782008E/aspxmps115.zip]" - probably at the bottom of the list. This is the link for the aspxmps115.zip file.
Sincerely,
Dan Kelleher

Looking for ch4_basicethernetcommunicationarchitecture.zip - crio developer manual

Im trying to solve the problem of event structures over a network and I see that there is a partial solution on page 69 of the manual of the compactrio developers manual
I have looked for the relevant VI but cant find a viable link for the
project -
I was wondering if the link was still alive or the VI available
ftp://ftp.ni.com/evaluation/crio/compactrio_developers_guide/ch4_basicethernetcommunicationarchitect...

Hi there,
Using the link pasted in your previous post, you can access the Project ch4_basicethernetcommunicationarchitecture.zip. I have also checked the CRio Developers Manual PDF, and the link on page 69 is also active.
Please let me know if I have misunderstood the question other wise I hope this helps!
Liam A.
National Instruments
Applications Engineer

Looking for an applications elegant like 7-zip, not 7zX

is there a archiving and unarchiving application like 7-zip for mac.
to compress files. a good one. that support all the extensions for compression

Hi.
If you look for some elegant and simple to use compression utility, you should check iArchiver (it's commercial software).
Or you can take the plunge, and get Stuffit Standard or Deluxe.
Good Luck.

Looking for a zip application that will open rather than extract zip files

In OS X, the built-in operation for zip files is that when you double-click on one, os x extracts the whole thing to a new folder. I am looking for an application that will open zip files without extracting them - what winzip does in Windows. Are there any apps that will do this in os x?
Message was edited by: Jon R

Try Zipeg - VersionTracker or MacUpdate.

Looking for SUNWrsc package (rsc2.2.3_packages_s9.zip)

Hi,
I am looking for the SUNWrsc package: rsc2.2.3_packages_s9.zip. The link http://www.sun.com/servers/rsc.html on the Oracle web site does not appear to point to it.
Does anyone have it? Could someone share it as a download? My search on the web for this file has been very unfruitful.
Thank you.

I actually found it on support.oracle.com, here is how to:
1) login to support.oracle.com
2) click on "Patches & Updates" in the top menu
3) in the search window (located on the right) clic "Product or Family (Advanced)"
4) in the updated search window type "Sun Remote" in the "Product" box, then select "Sun Remote System Control"
5) Click the "Release" box (which says "Select up to 10", in that box click "Sun Remote System Control" and then select the version "Sun Remote System Control 2.2.3".
6) In the new window you can now download RSC 2.2.3 (called p10264451_223.zip) by marking it and clicking "download".
hope this helps! I've noticed that a verbose instruction is often better for the oracle support site, since its not very intuitive .
.7/M.

Looking For TutWD_UploadDownloadInteractiveForm_Init.zip

Hi
I was looking for the file TutWD_UploadDownloadInteractiveForm_Init.zip.
Anyone know where can i get the file?
Many Thanks
Best Regards
Rayden

hi,
check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#48 [original link is broken]

What to look for when i download

Hi,
Im a previous Dell user and as of today i converted to the macbook pro 13". Im still familiarizing myself with the laptop and the system.
On my previous laptop i just downloaded things without a worry, however in the apple store today i was told to look for links with specific endings like ios or something im not entirely sure?
Any help would be wonderful.
Many thanks

iOS refers to the software specifically made for the iPhone, iPad, or iPod Touch.
Mac OS X refers to software specifically made for your MacBook Pro.
Most Mac OS X downloads are a .dmg.gz or .dmg.zip. The Mac App Store, on the translucent bar at the bottom fo the screen is Apple's own online store for a lot of compatible software. There are other download sites, but they are hosted by advertisers such as MacKeeper which are to be avoided like the plague. And sometimes they add on software you don't need. It is better to visit developer sites of Mac software for direct download or the App Store. Look carefully at system requirements. Most Mac software that is compatible with Mac OS X 10.7 or later is compatible with 10.9. Anything compatible with 10.6.8 or earlier may be compatible, or may not be with the current 10.9.3..
There are a few system modification tools that need frequent updates to keep up with the operating system.
Just because something says it is Mac OS X 10.8 and above compatible, may only mean it is compatible with up to 10.8.1. So check with the developer if it has been tested, and they just haven't bothered being more specific.
http://www.roaringapps.com/ is a good place to find out about compatibility.

First PKGBUILD - looking for review

Hello all,
I have created my first PKGBUILD for some new scientific computing libraries and corresponding examples related to my field. I am looking for input before submitting this to the authors for inclusion on their site (and possibly to the AUR if there ends up being more interest).
Anyway, here is what I have so far, which seems to work on my system:
PKGBUILD:
pkgname=ismrmrd-git
pkgver=20121030
pkgrel=1
pkgdesc="Libraries and examples for the proposed ISMRM Raw Data format"
url="http://ismrmrd.sourceforge.net"
arch=('any')
license=('unknown')
depends=('hdf5-fortran-cxx'
'boost-libs'
'xsd'
'xerces-c')
optdepends=('fftw: used to compile example programs'
'doxygen: only needed if you want to produce your own copy of the documentation')
makedepends=('unzip'
'git'
'cmake')
# install="${pkgname}.install"
# source=("http://www.syntax-on.com/static/$pkgname/$pkgname-$pkgver.tar.gz")
# source=("http://downloads.sourceforge.net/project/ismrmrd/src/${pkgname}_${pkgver}.zip")
source=("cmakelists.diff")
noextract=("${pkgname}_${pkgver}.zip")
md5sums=("9ec7ed899e488961826fa41da7109a84")
_gitroot="git://git.code.sf.net/p/ismrmrd/code"
_gitname="ismrmrd"
build() {
cd "${srcdir}"
# unzip ${pkgname}_${pkgver}.zip -d ${pkgname}-${pkgver}
msg "Connecting to GIT server..."
if [ -d $_gitname ] ; then
cd $_gitname && git pull origin
msg "Local files have been updated"
else
git clone $_gitroot "${srcdir}/$_gitname"
fi
msg "Received code from GIT or server timed out"
# stop CMakeLists.txt appending an unwanted dir to the CMAKE_INSTALL_PREFIX
# also prevent install of /usr/cmake/FindIsmrmrd.cmake
msg "Patching CMakeLists.txt to comply with Arch Packaging Standards..."
cd "${srcdir}/${_gitname}"
patch < ${startdir}/cmakelists.diff --forward
# start the build
mkdir "${srcdir}/${_gitname}/build" -p
cd "${srcdir}/${_gitname}/build"
msg "Starting cmake..."
cmake -DCMAKE_INSTALL_PREFIX=/usr ../
msg "Starting make..."
make
package() {
cd "${srcdir}/${_gitname}/build"
make DESTDIR="${pkgdir}/" install
cmakelists.diff
--- src/ismrmrd-latest/CMakeLists.txt 2012-10-30 11:48:03.332945241 -0500
+++ src/ismrmrd-latest/CMakeLists_mod.txt 2012-10-30 11:48:27.619612710 -0500
@@ -10,7 +10,7 @@
endif (WIN32)
-set(CMAKE_INSTALL_PREFIX ${CMAKE_INSTALL_PREFIX}/ismrmrd)
+# set(CMAKE_INSTALL_PREFIX ${CMAKE_INSTALL_PREFIX}/ismrmrd)
list(APPEND CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake)
find_package(XSD REQUIRED)
@@ -69,7 +69,7 @@
INSTALL(FILES ismrmrd.h ${XSDS_SOURCES} ismrmrd_hdf5.h ismrmrd_hdf5_datatypes.h ismrmrd_export.h DESTINATION include)
INSTALL(FILES schema/ismrmrd.xsd DESTINATION schema)
-INSTALL(FILES cmake/FindIsmrmrd.cmake DESTINATION cmake)
+# INSTALL(FILES cmake/FindIsmrmrd.cmake DESTINATION cmake)
INSTALL(TARGETS ismrmrd DESTINATION lib)
INSTALL(TARGETS ismrmrd_xsd DESTINATION lib)
I'm not using any .install file, is this something big I am missing? Again, this is my first time writing a PKGBUILD, so I appreciate any feedback. Thanks!

Thanks - I will take note for future packages, or if I end up using a non-git version. makepkg seemed to not be able to handle the zip file itself, though. If I re-hosted the source myself in a tarball it worked, but on the authors' site I could only find it as a zip.
My main question is still about installation location, though. This typically installs itself in:
/usr/local/ismrmrd/bin
/usr/local/ismrmrd/lib
/usr/local/ismrmrd/include
/usr/local/ismrmrd/schema
/usr/local/ismrmrd/cmake
I was able to change this to:
/usr/bin
/usr/lib
/usr/include
/usr/schema
Obviously this prevents cmake/FindIsmrmrd.cmake from being installed at all (not sure this is OK or desirable), It also creates the /usr/schema directory, which I don't think is really standard. Where should I put such files? Should I instead install the whole package into /usr/opt/ismrmrd? It doesn't seem big enough to warrant that, but I don't know where else to put the schema and cmake directories and the associated files. Maybe in /usr/share?
Last edited by aganders3 (2012-11-07 20:20:40)

Microsoft Exchange 2013 eDiscovery - specific search query: looking for specific hyperlinks within e-mails content/body

Dear all:
I am currently using the MS Exchange 2013 eDiscovery feature with the objective to identify which of my users have received emails containing specific hyperlinks (e.g. http://website1/webroot/file.zip, http://website2/webroot/file.zip, etc.) from an unknown
sender.
To this end, I have been creating an eDiscovery on-hold case looking for a specific search criteria in all mailboxes.
As the search criteria, I have tried many options but was unable to obtain satisfying results: I know I am missing some e-mails from this specific search (I checked manually). I have notably tried the following search queries (with and without the body:
search operator, with and without double quotes, etc.)
body:http://website1/* OR body:http://website2/*
body:"http://website1/*" OR body:"http://website2/*"
body:"website1*" OR body:"website2*"
body:"*website1*" OR body:"*website2*"
When replaying these queries on my local Outlook client, everything works fine and I get results as expected.
However, when going through the ECP eDiscovery feature, I am missing some results.
Therefore, I am looking for any advice on what Exchange eDiscovery KQL query I should use to identify all emails containing, in their message body, a list of specific hyperlinks/URLs.
Many thanks in advance for your help.
S.

Alas I do not know the answer to resolution via ECP and like you I have found it to be a bit maddening to use ECP for discovery tests Ive done when comparing results with our DigiScope product. I know we can accomplish what your looking to do via Regular
Expression but again that's with a 3rd party tool.
One thought is I suppose it could be an indexing issue with the DB, so perhaps rebuilding the index would help?
If you do get it working I would love to know the resolution since many of my tests with ECP have left me yelling at the screen. When its works its cool when not well...
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
--> 2007 --> 2010 --> 2013 with Lucid8's
DigiScope

I am looking for an "Element Catalog" for Labview

Good day. When I have used certain design programs (Agilent's
Advanced Design System, Applied Wave Research's Microwave Office) they
have a section of the user's manual that lists all of the elements
along with an explanation of the element.
I am looking for something similar for Labview. Ideally it would
list the elements that can be used in Labview along with the Express
VIs. I would also like to have an explanation of their
capabilities.
Thank you for your time and help.
Michael

Your looking for the LabVIEW 7.1 Help manual. You can either download the zip file from this link:
(and go to the VI and Function Reference chapter)
http://digital.ni.com/manuals.nsf/websearch/87DA07D4B2BFE59D8625702000773C14
Or you can interactively view the same thing online via HTML from this link:
http://zone.ni.com/reference/en-XX/help/lv/71/TOC5.htm

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Wasn't sure which version you are using, so here are the two i think you might be using:
[CR for VS2005|https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip]
[CR for VS2008|https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip]

Looking for WebLogic 10.3.5 install media with Eclipse for 64-bit

Hi,
I need to install OSB on 64-bit for 11.1.1.5 suite.
I have downloaded ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip
The instllation process asks for Eclipse location which should be installed with the WebLogic.
The file I used to install the web logic was wls1035_generic.jar, but it doesn't have Eclipse.
I was able to find WebLogic 10.3.5 with Eclipse (wls1035_oepe111172_win32.exe) but it is for 32-bit, I need 64 bit.
Any idea?
Thank you

Hi Vlad,
Thanks much for the ersponse.
What I did I downloaded the 11.1.1.5 version that I need
oepe-galileo-all-in-one-11.1.1.5.0.201003170852-win32-x86_64.zip
I did unzip it, BUT! I what I am seeing in the unzipped content is not the 'regular' install distribution, I mean there is no INSTALL or SETUP utilities, there is an executable called eclipse.exe which when sarted gives me the eclipse I beleive. This is fine per say, my concern is that later when I go and try to install OSB that will be looking for eclipse installation, and if eclipse was not 'installed' but just 'unzipped' it won't see it. May I am making things a little more complex than they need to be, I am just a little confused. I am not sure if this is the right way that'a all, my goal was OSB this is what brought me to eclipse.
Thank you,
Anatoliy

Looking for Trim Trailing Space extension for JDeveloper 10

I'm looking for the Trim Trailing Space extension version 10.1.3.2.0, for JDeveloper 10.1.3.5. I've tried the normal "Check for Updates", but the zip file that it tries to download doesn't exist. The version I'm looking for is listed on the download page here: http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/130355.xml, but the download link for it is broken. (I've also tried installing the latest version for JDeveloper 11, but it won't seem to install.)
Does anyone know if older versions of the Trim Trailing Space extension are still available? If so, where can they be downloaded?
Thanks,
--Rob Roberts

Rob,
I sent an email to Chris (the author of the extension) and he has now recreated the extension for the 10.1.3.5 version that you are looking for. He added it to his download page on the Google Code.
Here is a link to the file:
http://code.google.com/p/jdev-trimtrailingspaces/downloads/list?can=4&q=&colspec=Filename+Summary+Uploaded+Size+DownloadCount
I'll work on getting the Update Center corrected as well, but this should get you going for now.
--jb

Looking for SampleProject-1013x.zip

Similar Messages

Maybe you are looking for