Looking for Siebel on Linux reference customers

We are interested getting into contact with Siebel customers having chosen LINUX as their CRM-platform for > 1500 users. Thank you for any hints and company names having done so.

If you pick up your favourite search engine and try to combine Siebel, Linux and e.g. some business network you find that there are some.
This following link is just an example of what you can find:
http://www.linkedin.com/in/rmwalker355
Axel

Similar Messages

  • Looking for Siebel Consultant CC&S in Germany

    Hello, my name is Cees Arends.
    Currently I am in the role of Account Manager @ Aerotek GmbH in Frankfurt am Main, Germany. We are very busy working on many projects in both Engineering and IT accross Europe .
    At the moment I look for a well qualified German speaking Siebel Consultant who could support in development and maintenance. The Siebel module in use is “Contact Center & Service”. Minimum required is development and/or customisation experience with that module. Siebel Version in use will most probably be Version 8.0.
    Overall (relevant) experience with Siebel should be 3-5 years.
    Please contact me if this can be an opportunity for you.
    Best regards,
    Cees

    Hey Tony Thanks.
    I am aware of this filter.
    With a little experimentation I did achieve the effect I was more or less going for by simply adding a bezier shape of a half moon on top of my sphere, but under the mask. Then I used a radial black and white gradient on the bezier crescent shape and lowered the opacity down to allow the rotating earth continents to still show through. It works... However AE's CC Sphere filter is much handier and easier to use. I do prefer working in Motion more over AE, and little hurdles like these are great exercises.
    Thanks.

  • Looking for must-read programming reference material

    I am relatively new to programming and would like a reading list of must-read programming references. I know several languages, but I am not looking for materials about any particular language; instead, I would like to read up on more fundamental things such as programming concepts, programming algorithms, programming paradigms,  computer architectures, programming style, etc. What are the classic, must-read books and articles that I should begin reading? Thank you for your suggestions.

    I've never used assembly for a 64-bit system, but I'm sure most of the same concepts apply.  In fact I'm pretty sure any change is analogous to the change from 16 to 32 which wasn't that drastic.
    With assembly language, learning the core concepts is the biggest step, the difference between 16 and 32 bit wasn't like learning a new language, rather it was just having more and bigger registers.  I don't do any actual programming in assembly - I dabbled a bit for fun, but I dont 'use' it.  But the concepts I learned through assembly have helped me in every other programming language.  Given that, I'm sure a book on 32-bit assembly would be useful for a 64-bit system.
    Consider too that assembly is a bit of a dying art.  Pair that with the fact that 64-bit systems are relatively new, and there won't be many people who can write a quality book about their lifetime of experience with 64-bit assembly.
    Lastly, (in this very disorganized listing of barely related points), 32-bit to 64-bit is also a trivial change compared to the various instruction sets that have been used.  If/when you understand the similarities and differences between the various assembly languages and instruction sets, is when you really start using the strengths of your particular architecture.  (I'm tempted to make a Matrix reference "There is no spoon").  My favorite assembly languages, just for the fun of it, are One-Instruction-Set systems.  When I realized that one single instruction used repeatedly can create the diversity of programs we use ... I was in geek heaven.  I put that day on par with learning about hardware-software interchangability, and the fact that our modern computers are made up of a vast series of only one type of logic gate ... and the day I learned some lamba calculus ... (end geekgasm)
    Anyhow, learning to 'think' in assembly language can help all your programming (IMHO) regardless of whether you ever speak to your computer in that language.  So, yes, I'd say the 32-bit book would be worth reading even if your current computer is 64.

  • Looking for the pefect Linux Netbook

    Hi all.
    I'm making this first thread on the forum after reading it as an anonymous user for a couple of weeks.
    There is much interesting stuff in here, but I haven't quite found what I want answers to.
    I'll first of state my needs:
    I'm in of a netbook that has a bit more than 1024x600 res (e.g 1366x768), capable of 5+ hours, 2gb ram, ssd and is fully linux compatible. I can't really spend a fortune either, so the lower cost the better.
    A bit of my background: I got a masters degree in Marine construction and Computer Science. I've had a linux computer available since Redhat 2.0 was made available (thats long time ago). My favorite distro is Gentoo, and thats what I intend to put into my new netbook. I got a CCACHE server running so building gentoo will be no problem.
    So to the discussion I had with myself:
    1. The ability to run linux highly depends on the hardware. Most important is the Chipset and the CPU. The chipset contains about everything these days. Harddrive controller, Display/graphics-controller, USB controller and on it goes. Via C7-m is outrun by the Atom processor. The most frequently used Atom's are Z5x0, N2x0 and N4x0. I think the most interesting one is the Z series. It got the lowest TDP (2W). N2x0 got 2.5W and N4x0 got 5.5w. So The two first ones would be the smartest Choice.
    Next challenge is the Chipset. Most netbooks fall into one out of three chipsets. S15w (poulsbo), 945GSE and ION.
    S15w is in its own class when it comes to TDP, 2.3W. 945GSE does 6W and ION consumes 15.5W.
    Of course this is all theoretical and highly dependent on the power saving technology behind it all.
    I've already ignored the N4x0 series of CPUs. So the real combinations now is:
    - Z5x0 + S15w
    - N2x0 + 945GSE
    - N2x0 + ION.
    Then there is compability again.
    S15w is running GMA500 video chip. The development for Linux on this specific chip seems horrible. Google searches reveal that as of january 2009 you were officially screwed. This because some external company is developing the drivers for the chip. This really excludes a lot of good alternates. I know I'm as good as swearing in the church here, but Acer Aspire One 751h would be a really nice option if it weren't for the GMA500.
    So we are back to N2x0+945/ION. I think my needs is covered by the GMA950 video chip provided by 945GSE. But it would have been fun to have a ION chip to play with. but 6W vs 15.5W is quite a lot. So here is where it all ends up.
    Dear reader. Thanks for reading this far. I know many of you have the combinations mentioned above. As far as I know Lenovo S-series cover most of these combinations. For example the S12.
    My questions are (for those of you who know about the 945/ION:
    1. How compatible are your computers with linux?
    2. How hot does these computers run. Will fans be running loud and so on?
    3. Batteries on a ION vs 945?
    I'm not gonna do that much gaming. I do how ever want to watch video. Its a must that power saving features will work under linux.
    Hope someone out there can help me out
    Best regards Christian

    I am a bit disapointed by s3t and g470 the fan is always on  ... 
    but a bios update may fix this
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • Looking for a reference manual that actually describes in detail all attributes for a command

    I am using CS5. I am teaching myself Photoshop using their book, "Classroom in a book".
    Thought the lessons, they will suggest specific setting for command attributes without describing exacting what these values mean.. For example, on page 88 they give the student specific settings for the Refine Edge dialog bog under the Quick Selection tool. They say, "To prepare the edge for a drop shadow, set Smooth to 24, Feather to 0.5, Contrast to 12, and Shift Edge to -21". Note: I am calling things like Smooth, Feather, Contrast, etc command attributes.
    My question is not about this specific example, but all these attribute values for all the commands. For example, what does Shift Edge really do when negative or positive. My question is: does a reference, either a book, pdf, or a non-Adobe product (probably a book) exist that actually explains when each attribute actually does for every command? Basically looking for a boring detailed reference guide so when I am using a specific command, I can read about the attributes for the specific command and understand what the values really mean and not guess my trial and error.
    Thanks in Advance,
    LouF

    Lou Fuchs wrote:
    For example, I just happen to have my book open to page 113 and it is showing me (at the bottom of the page) the dialog box for Layer Style.  I was hoping for a reference manual that explains every option in the that dialog box in detail and tells you what each option means and how it effects the image.
    I hope this clarifies what I am looking for.
    Here's a little snippet from the info about Layer Styles in the Adobe manual.
    Layer style options
    To the top
    Altitude For the Bevel and Emboss effect, sets the height of the light source. A setting of 0 is equivalent to ground level, 90 is directly above the layer. Angle Determines the lighting angle at which the effect is applied to the layer. You can drag in the document window to adjust the angle of a Drop Shadow, Inner Shadow, or Satin effect.
    Anti-alias Blends the edge pixels of a contour or gloss contour. This option is most useful on small shadows with complicated contours. Blend Mode Determines how the layer style blends with the underlying layers, which may or may not include the active layer. For example, an inner shadow blends with the active layer because the effect is drawn on top of that layer, but a drop shadow blends only with the layers beneath the active layer. In most cases, the default mode for each effect produces the best results. See Blending modes. Choke Shrinks the boundaries of the matte of an Inner Shadow or Inner Glow prior to blurring. Color Specifies the color of a shadow, glow, or highlight. You can click the color box and choose a color. Contour With solid-color glows, Contour allows you to create rings of transparency. With gradient-filled glows, Contour allows you to create variations in the repetition of the gradient color and opacity. In beveling and embossing, Contour allows you to sculpt the ridges, valleys, and bumps that are shaded in the embossing process. With shadows, Contour allows you to specify the fade. For more information, see Modify layer effects with contours. Distance Specifies the offset distance for a shadow or satin effect. You can drag in the document window to adjust the offset distance. Depth Specifies the depth of a bevel. It also specifies the depth of a pattern. Use Global Light This setting allows you to set one “master” lighting angle that is then available in all the layer effects that use shading: Drop Shadow, Inner Shadow, and Bevel and Emboss. In any of these effects, if Use Global Light is selected and you set a lighting angle, that angle becomes the global lighting angle. Any other effect that has Use Global Light selected automatically inherits the same angle setting. If Use Global Light is deselected, the lighting angle you set is “local” and applies only to that effect. You can also set the global lighting angle by choosing Layer Style > Global Light. Gloss Contour Creates a glossy, metallic appearance. Gloss Contour is applied after shading a bevel or emboss. Gradient Specifies the gradient of a layer effect. Click the gradient to display the Gradient Editor, or click the inverted arrow and choose a gradient from the pop-up panel. You can edit a gradient or create a new gradient using the Gradient Editor. You can edit the color or opacity in the Gradient Overlay panel the same way you edit them in the Gradient Editor. For some effects, you can specify additional gradient options. Reverse flips the orientation of the gradient, Align With Layer uses the bounding box of the layer to calculate the gradient fill, and Scale scales the application of the gradient. You can also move the center of the gradient by clicking and dragging in the image window. Style specifies the shape of the gradient. Highlight or Shadow Mode Specifies the blending mode of a bevel or emboss highlight or shadow. Jitter Varies the application of a gradient’s color and opacity. Layer Knocks Out Drop Shadow Controls the drop shadow’s visibility in a semitransparent layer. Noise Specifies the number of random elements in the opacity of a glow or shadow. Enter a value or drag the slider. Opacity Sets the opacity of the layer effect. Enter a value or drag the slider. Pattern Specifies the pattern of a layer effect. Click the pop-up panel and choose a pattern. Click the New Preset button          to create a new preset pattern based on the current settings. Click Snap To Origin to make the origin of the pattern the same as the origin of the document (when Link With Layer is selected), or to place the origin at the upper-left corner of the layer (if Link With Layer is deselected). Select Link With Layer if you want the pattern to move along with the layer as the layer moves. Drag the Scale slider or enter a value to specify the size of the pattern. Drag a pattern to position it in the layer; reset the position by using the Snap To Origin button. The Pattern option is not available if no patterns are loaded. Position Specifies the position of a stroke effect as Outside, Inside, or Center. Range Controls which portion or range of the glow is targeted for the contour. Size Specifies the radius and size of blur or the size of the shadow. Soften Blurs the results of shading to reduce unwanted artifacts. Source Specifies the source for an inner glow. Choose Center to apply a glow that emanates from the center of the layer’s content, or Edge toapply a glow that emanates from the inside edges of the layer’s content. Spread Expands the boundaries of the matte prior to blurring.
    Style Specifies the style of a bevel: Inner Bevel creates a bevel on the inside edges of the layer contents; Outer Bevel creates a bevel on the outside edges of the layer contents; Emboss simulates the effect of embossing the layer contents against the underlying layers; Pillow Emboss simulates the effect of stamping the edges of the layer contents into the underlying layers; and Stroke Emboss confines embossing to the boundaries of a stroke effect applied to the layer. (The Stroke Emboss effect is not visible if no stroke is applied to the layer.)
    Technique Smooth, Chisel Hard, and Chisel Soft are available for bevel and emboss effects; Softer and Precise apply to Inner Glow and Outer Glow effects.
    Smooth Blurs the edges of a matte slightly and is useful for all types of mattes, whether their edges are soft or hard. It does not preserve detailed features at larger sizes. Chisel Hard Uses a distance measurement technique and is primarily useful on hard-edged mattes from anti-aliased shapes such as type. It preserves detailed features better than the Smooth technique.
    Chisel Soft Uses a modified distance measurement technique and, although not as accurate as Chisel Hard, is more useful on a larger range of mattes. It preserves features better than the Smooth technique. Softer Applies a blur and is useful on all types of mattes, whether their edges are soft or hard. At larger sizes, Softer does not preserve detailed features.
    Precise Uses a distance measurement technique to create a glow and is primarily useful on hard-edged mattes from anti-aliased shapes
    such as type. It preserves features better than the Softer technique. Texture Applies a texture. Use Scale to scale the size of the texture. Select Link With Layer if you want the texture to move along with the layer as the layer moves. Invert inverts the texture. Depth varies the degree and direction (up/down) to which the texturing is applied. Snap To Origin makes the origin of the pattern the same as the origin of the document (if Link With Layer is deselected) or places the origin in the upper-left corner of the layer (if Link With Layer is selected). Drag the texture to position it in the layer.

  • Looking for Java Reference Manual, Not User Manual

    I'm a mainframe programmer learning Java. I'm going thru "The Complete Reference Java" by Schildt. In the mainframe world, manuals are usually broken into reference manuals (shows just the syntax) and user manuals (shows how to do things). I'm looking for a pure Java reference manual that strips away all of the verbose explanation of how to do things and just lists in an organized way the pure syntax of Java. Does anyone know of such a manual? Everything I've found so far falls more into the user manual category that perhaps contains the syntax somewhere (if you look for it), but is overburdened with tons of explanations. Thanks.

    Thanks. What you provided is a bit like a reference manual and user manual combined into one. It has the complete syntax along with plenty of explanations. BTW, I think I know where Schildt got most of his material for his Complete Java Reference book. It's almost like he took the Java Language Specification book and reorganized it into a tutorial format.

  • Request for Siebel stuff

    Dear all,
    Could anyone post me the link where i can get the documents for getting more familiar with Siebel.
    Actually, i would be start working on some intergration between one sales system and siebel. So,it would be great if someone tells something about siebel.
    regards
    pannar

    Have a look at Bookshelf 8.0
    http://download.oracle.com/docs/cd/B40099_02/homepage.htm
    but you need to get some Siebel Training. Have a look here:
    http://education.oracle.com/
    Look for Siebel Core Consultant Courses
    Axel

  • Looking for app to use for reminder of customers service days

    I am a Chimney Sweep and I'm looking for an app i can have on my iPad & iMac that i can set reminders for customers service days, they could be a year ahead but its reminder for me to then tell the customer its time to have your chimney cleaned.
    Thanks for any help.
    Lee

    Lee,
    Have you looked through the Mac App store yet? If you have and haven't found anything then I'd suggest using a database such as FileMaker Pro to manage that. You may even find a template where someone has created a FileMaker Pro program that you can download and/or buy that does what you want.

  • Looking for a script to connect bodytext to footnote and cross-references

    Hi,
    Need to do the following:
    I was provided with separate (tagged-text) files: bodytext, (foot)notes and cross-references. Now I am looking for a solution (script?) that can do the following:
    to restore the connection between the body-text, the footnotes and te cross-references after placing these in a document in Indesign.
    The cross-references should appear (in anchored text-frames) in the margin and the notes in a separate frame at the bottom of the page. If possible in the same way as footnotes in Indesign appear, but in a separate frame to be able to do some more formatting than native footnotes would accept.
    I have tested the plugin: Side Heads from InTools, and tis works well with Indesign files tthat contain footnotes. But this doesn't work with separately placed footnotes from a tagged-text-file, as they re not knotted together.
    I can't do any scripting myself.
    I would appreciate any help, and I am looking forward to your response...
    Regards,
    kkingg

    The first thing to do is:
    regexp "match regexp = ([0-9]+)" $_cli_result match count
    if $count eq 0
    exit 0
    end
    The second is a bit more challenging.  I think this will work:
    cli command "show call active voice br"
    foreach line $_cli_result "\n"
    regexp "^([0-9a-zA-Z]+) : " $line match callid
    if $_regexp_result eq 1
      continue
    end
    regexp "^dur 1d" $line
    if $_regexp_result eq 1
      cli command "show call active voice br | section $callid"
      syslog msg "$_cli_result"
    end
    end

  • Looking for best practices using Linux

    I use Linux plataform to all the Hyperion tools, we has been problems with Analyzer V7.0.1, the server hangs up ramdomly.<BR>I'm looking for a Linux best practices using Analyzer, Essbsae, EAS, etc.<BR>I'll appreciate any good or bad comments related Hyperion on Linux OS.<BR><BR>Thanks in advance.<BR><BR>Mario Guerrero<BR>Mexico

    Hi,<BR><BR>did you search for patches? It can be known problem. I use all Hyperion tools on Windows without any big problem.<BR><BR>Hope this helps,<BR>Grofaty

  • Looking for different audit events in Oracle Linux

    Hi,
    I am looking for different audit events in Oracle Linux. I did lot of googling but could not find anything relevant. Can you please share some doc/info if you have.
    Thanks,
    Ravi

    You can probably spent all day searching in https://linux.oracle.com/documentation/ or http://docs.redhat.com/docs/en-US/index.html for information about this topic. Finding relevant information appears to be difficult.
    The information you are looking for is about configuring the Linux Audit subsystem. There are some rules examples in /usr/share/doc/audit*
    I found the following link in Google that seems to provide a reasonable overview:
    http://dgz.dyndns.org/mediawiki/index.php/%28RHEL%29_HOWTO_configure_the_auditing_of_the_system_%28auditd%29

  • Wine Project looking for Photoshop CS users who want Linux support

    If you're not a Linux user, or if you don't like the idea of
    running Photoshop for Windows on Linux, you can stop reading now,
    this message probably won't be interesting to you.
    The Wine project is looking for hardcore Photoshop CS or 7
    users who use Photoshop professionally, all day, every day,
    and who are willing to tell us why they can't do that in Linux
    using Wine yet.
    We know everybody would like Photoshop CS3 or at least
    CS2 support, but support for CS2 and CS3 isn't quite
    ready, so we'd like to focus on our strengths, and support
    Photoshop 7 and CS excellently. Don't worry, we're also
    working on the CS2 and CS3 issues. Getting all the 7 and CS
    issues taken care of builds a stronger foundation for CS2 and CS3.
    If something doesn't work in Photoshop 7 or CS itself,
    or your favorite plugin works in Windows with 7 or CS
    but not in Wine, please let us know how to reproduce
    the problem. To do that, just reply to this post,
    or post in the wine-users mailing list,
    or leave a comment in the wine appdb for Photoshop 7 or CS,
    or file a bug in the Wine Bugzilla,
    whichever you're more comfortable with.
    We'll take it from there; if we can reproduce it, we'll
    file a bug and see if we can get a wine developer to fix it.
    Ideally you'd test with the latest release of Wine
    (currently 0.9.51), but if you're still on a slightly older
    version, don't sweat it, we'll retest on the latest for you.
    Thanks!
    Dan Kegel
    Wine 1.0 Release Manager

    Here's my original post the cnet article is based on:
    http://google-opensource.blogspot.com/2008/02/google-sponsors-wine-improvements.html
    Here's another post giving more details:
    http://www.winehq.org/pipermail/wine-devel/2008-February/062550.html
    Here's the response of Adobe's Photoshop product manager:
    http://blogs.adobe.com/jnack/2008/02/wine_offers_imp.html
    Here's another nice writeup:
    http://arstechnica.com/news.ars/post/20080219-google-intoxicates-linux-users-with-wine-imp rovements.html
    At the risk of repeating myself: I'm serious. I really want bug
    reports from professional Photoshop users. Leave them here,
    send them to the wine-users mailing list (see http://winehq.org),
    or file one in our bug tracking system (http://bugs.winehq.org),
    any of the three ways is fine.
    Thanks,
    Dan

  • I'm looking for customer references who are using Oracle IFS or OCM

    Dear All,
    I'm looking for customer references who are using Oracle IFS or OCM or Oracle Files for their document management systems. So, if anyone can support me i appreciate.

    We have implemented a document management system using Oracle 9iFS 9.0.2
    I would be happy to let you know of our experiences to date.
    Niels Montanana
    Technology Director
    Practical Law Company
    London, England

  • Looking for good 10g reference book

    I am looking for a recommendation for an all purpose 10g reference book

    Hi,
    a good complete reference of 10g Database can be found at:
    http://www.amazon.com/exec/obidos/ASIN/0072253517/oracleinternetse
    Regards,
    Simon

  • Looking for oracle.siebel.configurator.screen.Configurator

    I'm exploring an upgrade of Siebel 8.1.1.3 to 8.1.1.10. The software upgrade seemed to go without errors, and I believe I need to do an incremental repository merge. However, when I run the command to kick that off (/opt/siebel/config/config.sh -mode dbsrvr) I get an error saying "Could not find the main class: oracle.siebel.configurator.screen.Configurator. Program will exit."
    I'm running Slackware Linux on my test box, I know unsupported, but 8.1.1.3 has worked fine so far. This server has all the Siebel components installed on it in /opt/siebel. I have sourced the siebenv.sh file beforehand. I have examined all the jar files in my siebel install directory and cannot find that class.
    Can someone tell me what I am missing?
    Thanks for any suggestions.

    Hi ,
    1. Have you sourced dbenv.sh before launching DB config wizard?
    Before you run the Database Configuration Wizard, you must source either dbenv.csh (for C shell) or dbenv.sh (for Bourne or Korn shell).
    2. Then run below command  for Siebel Database Configuration Wizard:
    install_path/config/config -mode dbsrvr
    In this path, install_path is the installation path for the installed Siebel Enterprise Server software. for example:
    /siebel/8.1.1.11.0/ses/config/config -mode dbsrvr
    3. Another important point to include here is IRM implementation is different in Siebel 8.1.1.10 and Siebel 8.1.1.11.
    In Siebel 8.1.1.11 you need to launch DB Config wizard to run IRM, refer MOS document 'Innovation Pack 2013: Siebel 8.1.1.11 and 8.2.2.4 Incremental Repository Merge (IRM) - FAQ and Troubleshooting (Doc ID 1623495.2)'.
    BUT for Siebel 8.1.1.10 IRM is not run through DB config wizard.
    Refer- - Siebel CRM 8.1.1.10 and 8.2.2.3 Incremental Repository Merge (IRM) - FAQ and troubleshooting (Doc ID 1549478.2)
    Thanks,
    Shilpi

Maybe you are looking for