Looking for tables

In a book titled "Oracle Database 10g:A Beginner's Guide", there is mentioned tables named "customers", "products", "sales", "costs", "promotions". But I can not find those tables in Oracle Database Express Edition.
From where I can get those tables?
Thanks

1) You are asking in the wrong forum. Try the Oracle Database - General or Oracle Database - XE forum
2) Many technical books have a book-related download area hosted by the book publisher. Try the book publisher's site.
3) A good Oracle book that references a schema will describe how to get that schema. Try re-reading the preface/introduction to see whether it is described.
4) It so happens that the tables are part of the XE-installed HR schema. Apparently you either have a botched install or you are not looking at the database correctly. See 1)

Similar Messages

Looking for table that links a PM Reservation to a MM Purchase Requisition

Looking for table that links a PM Reservation to a MM Purchase Requisition

Hi,
Typically the way most SAP systems are configured, there are two scenarios here:
1. The component reserved in the PM order is item category 'N'. This is a non inventory item and must be directly procured for consumption against the PM order at the point of goods receipt. In this case no reservation is created and instead a requisition is directly created (in table EBAN) and the requisition is account assigned directly to the PM order (in table EBKN - field AUFNR).
2. The component reserved in the PM order is item category 'L'. In this case no requisition is directly created, instead a reservation is created against the item in stock (in table RESB). If there is sufficient stock of the item already then the item is consumed when it is goods issued to the PM order from stock using MIGO and there is no requisition created. In the event that there is not sufficient stock of the item for the reservations that exist, when MRP is run, a requisition will be created to replenish the stock, but this requisition will not be assigned to a specific PM order as it could be replenishing stock of the item for several reservations which are all for different orders. So in this scenario there is no direct link from the reservation generated by the PM order to the requisition.

Looking for Table to CSS Converter

I'm asking the Dreamweaver Community for HELP...
I currently own CS3 of Dreamweaver and while there are some
ways to convert tables to a css format manually.
Is anyone using a software or a work-a-round to automate this
process of converting TABLES to CSS automatically.
For example i have DOZENS OF HTML pages that are loaded with
Nested Tables... and all i want to do is run that HTML page through
a TABLE to CSS converter.
And then that’s it... you're done!... no tedious copy
and pasting converting one table at a time.
Does CS3 have something I’m missing that would remedy
this or make Converting Tables to CSS more automated and not
one-at-a-time converting?
Thanks for any suggestions or links.

A well built page with tables is infinitely more
representative of your work
than the train wreck that results when you convert tables to
layers.
Put a 5x5 table on the page, merge and split some of the
cells, add some
content to each cell, and convert to layers. Look at the
incredible mess
you have now in your code. Preview in a browser, and expand
your text size
in the browser. Look at the incredible mess you have in the
browser.
I think your approach is COMPLETELY wrong.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RegGFX" <[email protected]> wrote in
message
news:[email protected]...
> Thanks for helping me find the Convert to Divs button...
i'll test it out.
> I
> went on the web and googled Table2CSS and found some
interesting tools...
> In regards to the question about Converting Tables to
Divs or pure css....
> In reply too:
>
quote:
Question is why do you want to do this? To say that there are
no tables
> in
> the page?
> Well that seems to be the NEW RAGE(actually its not new
though)... create
> websites without TABLES.... google it on the Web and
you'll see all the
> responses. Its almost as big a argument as MAC vs. PC
all though we know
> that
> "Talent" is what drives creativity... the tool is just a
tool to
> accomplish
> your job...but thats for another discussion
> Anyway back to the CSS design vs. Table design website.
>
> I had 2 friends who went on job interviews where they
showed samples of
> their
> websites to 3 different large corporations and all 3
interviews said "we
> want
> to see websites .
WITHOUT tables and using only CSS and or DIVs." as
> samples for their portfolios
> WOW... i thought so....
> I've talked to a number of other friends in large
companies and this is
> the
> going trend now... Design TABLELESS Websites (if you
google that you'll
> find
> that as well) and use only pure CSS. Many company's are
doing this I think
> its
> because knowone can seem to figure out Tables.
>
> Now i personally have been designing websites for a
little over 10 years
> and
> have never had issues with Tables to design a website
although i do
> understand
> the arguments behind load times... I think its because
some out there
> still
> haven't got the nack of how to design a website and
limit the load times
> while
> still using Tables.
>
> So in view of the feed back i've been getting about this
pure CSS website
> and
> no tables trend, I've been converting some of my 10 page
client websites
> to
> PURE CSS just because i got an inside tip that company's
will pay big
> bucks to
> convert their website to PURE CSS and no tables just
becuase another
> I.T.executive consultant said that is the route to go.
>
> Again... for me... its all about knowing how to optimize
your webpages
> whether
> you're doing Tables or Pure CSS.
> Its also about if your website makes the user have to
"THINK TO MUCH"...
> you
> can build a cool website design with out making the user
"Think To Much"
> such
> as How long is this website going to take to load, or
why is it so
> complicated
> to navigate with all these uncessary tables and
etc...but again the "Don't
> Make
> Me Think" syndrome is for yet another discussion
>
> Anyway... thanks for the tip about Dreameweaver's
"Convert" button....
> i've
> tried it and its ok... but it needs alittle refinement
on automation. (for
> example it would be nice if it put the CSS in a TAG up
in the head like a
> Table2Css conversion tool i found.)
>
> Best Regards,
>

How to look for the Table Name

Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
Regards

Hi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar

Table to look for change documents for users

Hi friends,
Is there any standard table to look for change documents for a user?change document through SUIM does not give the correct log.
Thanks for you support.

Julius
Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
Regards
Colleen

Maintaining Remote key in look up tables for Production data

Hi,
me
SEE in DEV and QA to maintain the Remote key for Look up tables.First i have exported those look up table values and again imported with mapping Remote keys (clone the field and map it to Remote key.). By this i have maintained the Remote keys to all look up tables. Now for Production what should i do. Is it the same process extract all records from production into our desktop and then again import it using IM, clone the field and map it to Remote key.
1. Is this the right process?
2. What happens if there are huge data present in production how to proceed furthr then?
Required your suggestion please.
Thanks,
Pradeep

HI Pradeep,
I dont see any problem with this method if I am getting it right
You are updating remote keys by reimporting lookup data, and this way you have multiple remote keys for data in lookup table,right?
This will help you to automap entries in Import process for different Remote systems.
I did not get your 2nd point?
Thanks,
Ravi

Code is not working check for solution . The code is not working after look up table.

In this code i am multiplying two binary images , one is a rectangle and another is an image. i am getting the rectangle, but not the image. The image part is not working after the look up table. Waiting for the solution
Attachments:
binary morphology.vi ‏33 KB

Hey. I'm thinking the problem is in theis block:
LOOP AT C_T_DATA INTO WA_MC17I30HDR.
   READ TABLE LT_AFIH
     WITH KEY AUFNR = WA_MC17I30HDR-AUFNR
     INTO WA_AFIH BINARY SEARCH.
   IF SY-SUBRC = 0.
     WA_MC17I30HDR-ZZNPLDA = WA_MHIS-NPLDA.
     MODIFY C_T_DATA FROM WA_MC17I30HDR.
ENDIF.
ENDLOOP.
You are reading LT_AFIH into WA_AFIH. But then you are assigning NPLDS from WA_MHIS. From what I can see, WA_MHIS hasn't been filled with anything. Try changing:
     WA_MC17I30HDR-ZZNPLDA = WA_MHIS-NPLDA.
To:
     WA_MC17I30HDR-ZZNPLDA = WA_AFIH-NPLDA.
Hope that does the trick.
Thanks
Edited by: Siboda_Eric on May 26, 2010 3:49 PM

Looking for a value in a list stored in a database table field

Hello,
I have a field in a database table that contains a comma
separated list on numbers. In my CFQUERY I am attempting to extract
records from the database table where a parsed number is present in
the comma separated list. I have tried the code below, but it is
throwing an error.
variables.publicationID is the number that I am looking for
in the database table field.
publicationList is the name of the database table field
containing the comma separated list of numbers.
where <cfqueryparam value="#variables.publicationID#"
cfsqltype="cf_sql_integer"> in publicationList
Can anybody help?
Many thanks,
smnbin

The only way to do it with the data model you currently have
is as follows:
WHERE publicationList LIKE '#variables.publicationID#' OR
publicationList LIKE '#variables.publicationID#,%' OR
publicationList LIKE '%,#variables.publicationID#,%' OR
publicationList LIKE '%,#variables.publicationID#'
You need to check for 4 cases:
it's the only ID in the list
it's the first ID in the list
it's in the middle of the list
it's the last ID in the list.
The better solution would be to replace this comma-delimited
list with a mapping table, where each row in this mapping table
contains a reference to the main table as well as a single
publicationID.

Looking for a table (PO)

Hi,
i am programming smartforms and got stuck programming because i can't find the table and the field i am looking for.
In a purchase order on the item level there is a
delivery address (which can also be changed manually).
What i would like to know is in which table this address can be found. (and what the field is called)
thanx

Hi
Go to EKPO and get EKPO-ADRNR.
Pass the EKPO-ADRNR number in the table ADRC.
This will provide the address details.
Reward if this helps
Thanks

BCG Brightness Contrast Gamma - Looking for BCG function returning color table / lookup table coded in pure G and applicable to Intensity Graph or Picture Control

Looking for BCG function returning color table / lookup table coded in
pure G and applicable to 8-bit Intensity Graph or Picture Control. Do
not want to use IMAQ Vision is this particular application. Any
help is appreciated.
Sincerely,
Don

Take a look at this color model software I put together. (Don't concern yourself much with the basic programming at this point.). The color component generator subVI is borrowed from a LabVIEW example.
First look at test_color2.vi. If you adjust the sliders of the various controls, you will see how it works. You can see that for pure B&W images, brightness, contrast, and gamma (which I think I have coded correctly) are all fairly straightforward to modify.
Now look at test_color3.vi. Here we try to adjust BCG for color images using the color model shown here where current color component clusters are carried into the BCG event cases via shift registers. You can see that once color is introduced into the image, it becomes difficult to mix the colorizing with the BCG model. And this is pretty much where I am right now.
Would be interested in comments / suggestions.
Sincerely,
Don
Attachments:
test_color2.llb ‏2251 KB

Looking for idoc tables.

Hello,
I am looking for a list of tables where idoc details are stored.
I know about tables EDIDC and EDID4. But they have header data and segment name data.
There should be few other tables that store the data that's in the segments fields.
say for ex. Material number or other material attributes in Matmas idocs.
Which table holds those detais?
Would appreciate anyones help pl.?
Best Regards,
Shiv.

Hi
The Data is stored in the table EDID4 under application data. YOu can see that only when you increase the width of output to 1000. The Application data is stored as a cluster rather than single fields
The data is stored only in structures of segments at filed level. But this may not be retreivable.
Reward points if useful
Thansk & Regards
Kishore

Looking for Maintenance order detail table

hi,
AFIH - Maintenance order header
I am looking for a Maintenance order detail table, is there any table.....
In this same way like VBAK (Header) and VBAP (Item).
Thanks,
Fract

I think there are many tables not one for the Maintenance Order details.
If you are looking for Object list details then it is OBJK.
If not let us know what details are you looking for.
Thanks,
Chandra Indukuri
Edited by: Chandra Indukuri on Apr 29, 2010 3:50 AM

The new table and Columns to look for in picking headers, etc

Hi,
What are the new tables and columns to look for mapping the following old ones:
1) Pick_Slip_Number from So_Picking_Headers,
2) Sequence_Number from SO_Picking_lines
3) Line_ID from So_Note_References
Thanks and Regards,
Praveen

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ravi alladi ([email protected]):
Actually would it be possible to get a list of all changes in Order Management between 11 and 11i? ie what tables added, what have been modified and which ones are obsolete<HR></BLOCKQUOTE>
Ravi
Actually, we are working on that same analysis. If you receive any responses, please forward to myself as well.
Thank you
Sha Green

OMBPLUS Looking for External Table in Mappings

Hello,
Can I resolve this problem with OMBPLUS?
I would like looking for all the mappings (stage) that have a source as an External Table.
Maybe anyone have a example?
Thanks
christian
Edited by: user11126676 on 14.09.2009 07:19

Something like this should get you on your way
(code assumes that you have logged in and CCd to the project and then the module already)
set maps [OMBLIST MAPPINGS]
foreach map $maps {
        set tabs [ OMBRETRIEVE MAPPING '$map' GET EXTERNAL_TABLE OPERATORS]
        if {[llength $tabs] == 0} {
            puts "Mapping $map does not depend on external tables"
        } else {
            puts "Mapping $map depends on external tables: "
            foreach tab $tabs {
                 puts $tab
}Cheers,
Mike

I'm looking for software for my iMac to use to copy old VHS movies onto DVD and old records (digital turn table) in CDs. Recommendations please?

I'm looking for software for my iMAC to use to copy old VHS movies from a VCR into DVDs and records from my digital turn table into CDs. Any recommendations?

For the VHS movies, try googling Elgato - they make a number of USB devices that are supposed to be able to do this, but check what formatting options they offer : you will want a device that converts directly into .MOV files (to play in QuickTime), or into H.264 for iTunes / iPods, etc.
As for the vinyl records - first you need a device that will convert the analogue output (phono) into a digital form and will connect via FireWire or USB. The Griffin iMic is one such USB device (if still available?). From there you can use the free Audacity download to read in the signal and convert to a suitable format, e.g. MP3. (You will need to use SysPrefs / Sound to switch to an external audio device, instead of your Mac's built-in mic.)
(Wait - you said "digital turntable" - software already on your Mac? How do you use a virtual turntable to play vinyl?? Unless what you really mean is an analogue turntable that has a CD writer in it, or a USB connection to connect the turntable's DAC output to a computer?? In which case, either use your turntable to burn CDs, or connect via USB and the free Audacity software to convert the signal to music tracks and output as MP3.

Looking for tables

Similar Messages

Maybe you are looking for