Looking to verify user before form completion

I have a form that we have been using (well trying to use )
for a few months
now...
It works fine as long as the data exists in our database...
quick view of how the system works...
We have a trouble ticket system.. used by our techs to log
calls and keep
track of issues and resolutions.
Well it has the ability to open tickets automatically via
email.
So i created a web form with just the basic information
required to open a
call... this works great.... Now the issue we have is that
since this was
never used til now, not everyone is setup in the ticket
system with accounts
and emails so if someone submits there call and they dont
exist, the call is
still opened.. but not under that person....
I was trying to use the Check User Name in dreamweaver, but
requires to have
an Insert Record behavior setup, we cant insert anything into
the database
without using the client app or via email.... the database is
complex...
so is there any other way to verify the users before they are
allowed to
enter the form?
all i need to do is have them complete a simple form, last
name and first
name and have it check against the ticket system database. if
they exist
they are shown a page with there data to make sure its
correct. If it is..
they click past to complete the form... if anything is wrong
they call our
techs to update the data and then allow them to complete the
form..
What else can i use to do this other than Check User Name
behavior... unless
there is a way to use it without inserting the record.

ok,
Got that part working, now let me ask this....
For the form to be accepted by the ticket system, the name
has to be
submitted in this format: Doe, John
When i verify the account im actually checking against 2
columns, but for
the system to open the ticket correctly you have to submit
the name as 1 not
2 seperate fields...
So is there a way to pass on the 2 fields as 1 on the next
page?
Page #1
Enter First and last name in there own fields...
( Last Name: First Name: )
Page #2
Displays information found or details on why they were not
found
Page #3
Need to pass the first and last name data to this page and
populate 1 field
in the above format Doe, John
"Daniel" <[email protected]> wrote in message
news:[email protected]...
>I have a form that we have been using (well trying to use
) for a few
>months now...
>
> It works fine as long as the data exists in our
database...
>
> quick view of how the system works...
>
> We have a trouble ticket system.. used by our techs to
log calls and keep
> track of issues and resolutions.
>
> Well it has the ability to open tickets automatically
via email.
>
> So i created a web form with just the basic information
required to open a
> call... this works great.... Now the issue we have is
that since this was
> never used til now, not everyone is setup in the ticket
system with
> accounts and emails so if someone submits there call and
they dont exist,
> the call is still opened.. but not under that person....
>
> I was trying to use the Check User Name in dreamweaver,
but requires to
> have an Insert Record behavior setup, we cant insert
anything into the
> database without using the client app or via email....
the database is
> complex...
>
> so is there any other way to verify the users before
they are allowed to
> enter the form?
>
> all i need to do is have them complete a simple form,
last name and first
> name and have it check against the ticket system
database. if they exist
> they are shown a page with there data to make sure its
correct. If it is..
> they click past to complete the form... if anything is
wrong they call our
> techs to update the data and then allow them to complete
the form..
>
> What else can i use to do this other than Check User
Name behavior...
> unless there is a way to use it without inserting the
record.
>

Similar Messages

How to read User ID from the request Form and pre populating in the AD User process form before provisioning

I am trying to read the user Id from the submitted AD User request form( Catalogue AD User form. I need User Id,firstname and lastname inorder to prepopulate the common name as in this format - lastname,firstname (userid) for the user to be provisioned in Active Directory.
So after filling the AD User request form with User Id and Organization and submitting the request, I am trying to
prepopulate the common name in the process form before the provisioning.
The prepopulate adopter for the common name is configured to read the firstname, lastname and userid. firstname and
lastname variables are mapped to User definition and user Id is mapped to Process Data. In this setup I am not getting the
User Id value from process data, it is empty.
Is this a bug with OIM 11g R2 or I need to do it differently in order to read the user Id that user has entered in the
request form for populating the common name?
Thanks

Ghulam Yassen wrote:
How to get USER_ID and IP_AddressWhy exactly do you need this data and what do you plan to do with it?
The data is not reliable and trustworthy. IP addresses can easily be spoofed (a few seconds if you know what to do and how to do it). Also, IP addresses are not static. Users also do not use the same network device to access the database - different devices will have different IP addresses.
The o/s user on the client is supplied by the client driver. This can also be spoofed.
The user can also use a virtualised device - which means that recording the IP and o/s user seen from the server side, is pretty much useless and meaningless.
So if this data is intended to be used for auditing for example - it would be pretty suspect data to use for that purpose.

Can user still submit completed Acrobat form if they do not use MS Outlook or MacMail?

Users who submit completed forms via MS Outlook or Apple MacMail are able to successfully submit forms. When a user attempts to submit without these e-mail client softwares, they get a message "Acrobat cannot connect to the server, but will automatically submit your form once the server is online. You can check Tracker for the status of this submission."
Is there an alternative configuration to let these users without e-mail client software still upload to the Acrobat Response File? Please advise and thanks!
Sincerely,
Alex Tiscareno
Database Manager
The San Diego Foundation

Submitting to a server-side script, such as PHP or ASP.net will bypass client-side email software.
For online examples:
http://www.pdfemail.net/examples/

Opening a Crystal Report in B1 8.8 in a User Defined Form representing UDO

Hi Experts,
Is it possible to open a Crystal Report from a User Defined Form representing my UDO?
I had developed a 'Vendor Quotation' UDO and its User Defined Form
I wanted to show the report while clicking the Preview menu in SAP B1 8.8 toolbar.
I have created the Crystal report and used the record selection as {@OVQT.DocEntry} = {DocKey@}
Please help
Also, is it possible to add Print layout and assign a default Print layout to this User Defined Form?
Thanks in advance
Regards
Arun

Hi,
I also face the same problem. I make a master type using UDO. But i want to print it.
In my opinion ( i haven't tried this way ). If we make a UDO ( master or document type ) , we will find the docentry and object field in our UDT. Both of these will connect between SAP form and Crystal report. In crystal report we select the tmsp_doclinetypelayout. It is a store procedure which will connect between SAP form and CR. Before that try to modify this SP by adding the udo object.
Fyi, if i'm not mistake dockey is connected to docentry SAP form.
Thanks
regards
bodhi86

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

I recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

Check this thread out -> iTunes 10.4 & Multimedia Keyboard
It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
pikot wrote:
Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
- You need to open a text editor (like notepad) as an administrator.
- Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
- Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
- Save the file
- Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

How to send an email to external user (offline form) from se38

Hi all
how to send an email to external user (offline form) from se38 and upload the same from recipent.
we have sent mail using scripts and smartforms but couldnt do here. It will be helpful if you can give us any sample code
regards
mohammed

Hi,
Have a look at this thread [Re: Sending PDF forms (created using SFP) as Email Attachment] i explain all the solution with a sample code .
Hope it's help you
regards

Is there a way to ALWAYS prompt user before allowing server restart or shutdown

Is there a way to always prompt the user for credentials (or some other type of prompt) before restarting/shutting down a Windows Server? We are looking for a way to prevent accidentally shutting down a server. I know there is the Shutdown Event Tracker
that prompts for a reason why the server is being restarted, which is good, but the problem we ran into was after one of our Admins installed some software / Windows Updates, he was prompted with a "The server will need to be rebooted before the changes
will be applied. Do you want to restart now?" dialog, and he accidentally hit Yes. When doing this, the Shutdown Event Tracker does not prompt the user (I assume the Windows Update automatically fills in all the fields), it just restarts the server.
So we are looking for a prompt for these scenarios as well.
So basically I'm wondering if there is a way to configure Windows Server to ALWAYS prompt the user before any shutdown or restart event, whether it is from a Windows Update, using the GUI Shutdown buttons, or the commands from a command prompt. Ideally
it would be a credentials prompt, to ensure the user is really being purposeful about restarting the server, and not just quickly clicking a button before thinking about what the prompt is asking for.
- Dan - "Can't never could do anything"

Hi, I would add to Ed that it can cause problem too with scripted task, as if you program in example a planned restart in the night in example, that mean someone must be there to click the button.
The best approch for you would be to give them the RSAT administration kit, so then can manage what they want without being logged on.
Regards, Philippe
Don't forget to mark as answer or vote as
helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Forms Completion Mystery

I use a PC running Win 7 Ultimate (64bit) & Acrobat Pro X. I have created a form Using Acrobat Pro X. I gave the form Reader Extended features & sent it to multiple recipients inside & outside my LAN. When some recipients return what they believe is a completed form, it is blank when I open it, even though they can open/close it multiple times on their desktop & their completed fields display fine. One such recipient uses a MacBook Pro running OSX 10.6.8 & Acrobat 9. I can read fine the forms completed by other Mac recipients running 10.6.6 and Acrobat 9. Any suggestions? Is there a compatibility issue with MacBooks?

There is a knowm issue with the PDF viewer software that Apple provides. If your users use Adobe Reader then they will not have the issue. Here is a link to a forum post that discusses the issue and gives a potential solution:
http://forums.adobe.com/message/2864560#2864560
Paul

I just downloaded the new Firefox 4, rebooted, and viewed you videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

I just downloaded the new Firefox 4, rebooted, and viewed your videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

The Firefox icon is the default feature for Windows Vista and 7 only, it does not apply to Windows XP users.
To have the Firefox icon instead of the Menu Bar:
View > Toolbars and UNCHECK the Menu Bar.
After that, click on the Firefox icon and you'll have the Menu Bar appear again.
http://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing

Error -1073807339 Hex 0xBFFF0015 Timeout expired before operation completed

Hi,
I am getting the Error -1073807339 Hex 0xBFFF0015 Timeout expired before operation completed message box but unlike many users that seemed to have a similar problem, it doesn't happened systematically... I am getting the message box error at random on a measurement and then it just works back fine, until the next time it happens again during a continuous measurement acquisiton.
I am working with a HP 34970A, plugged to the pc with a Agilent 82357A USB to GPIB and LabVIEW 2012 sp1. MAX is up to date, so is the I/0 Libraries of Keysight. Drivers are all installed and updated, Communication with IEEE 488 is enable in the I/0 Libraries, passport tullip also in NI VISA through MAX. I run a small VI that should make a continuous acquisition of four temperature using PT strobes plugged to the HP 34970A and graph them, also writting them on a Excel like document. The waiting time between two measurement is set at first by users. To take the measurment, I am runing an adaptated VI from the HP 34970A drivers. I think the problem comes from my VI's structures but I can't find it myself. I am also very surprised that it actually does work fine most of the time and just randomly crash in a loop...
I attached the VIs if needed.
I hope I was clear enough and that you might have an idea to help me fix this problem.
Thank you in advance.
Attachments:
Main_VI.vi ‏17 KB
Agilent 34970 Temp Scan.vi ‏36 KB

Is there someone here to help me?

User entry form with submit facility

Hi,
I want to create and user entry form, which users can fill there information and submit it. The information i want to insert in table in oracle db and not in webcenter site db.
I am looking in developer guide on page 217 with topic "Code entry form", there they have created a form and inserted data in Employee_info table. I think they have created table somewhere in catalogManager.
Please can anyone tell me, how i can directly connect to my oracle db and proceed with form submit?
Can i create jsp and java file , in the same way we create in our normal application?
Please help.
Thanks

Hi,
You can use most Java code inside a jsp-type CSElement to save the form data in a way that you're familiar with. I'd suggest doing one of the following:
a) Create a separate connection pool on the WebCenter Sites appserver for the oracle database, and use your own code to access this connection pool and store data in the table
or
b) post the form to your "normal application" and have that process the form and store the data, assuming that's where you'll be using the data.
You could also create a non-managed jsp inside the WebCenter Sites appserver, but this could be hard to maintain.
I hope this helps.
Kind regards,
Stephan.

Verify user pin on a smart card & load a cap file on a card (with eclipse)

I have been able install JCWDE (Java card development Kit) successfully on eclipse.Basically all I need to do is verify user pin on a smart card.As in first set a pin and then verify it.
To begin with I have referred many tutorials (here: http://www.javaworld.com/jw-07-1999/jw-07-javacard.html?page=1) and implemented the wallet code in eclipse.I have the cap file generated and the scripts generated.I am not sure how to load it on the smart card with eclipse.
I tried to deploy the cap file but it keeps saying connected.Also when we initiate the applet I get the same result.
output:
Java Card 2.2.2 APDU Tool, Version 1.3
Copyright 2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
Opening connection to localhost on port 9032.
Connected.
I have also tried : http://www.cs.ru.nl/E.Poll/hw/practical.html ........ but no luck.
I have the wallet.cap ,wallet.exp ,wallet.jca ,wallet.opt create.script, select,cap-download.scripts files already generated in eclipse.
How does a successfully implemented applet code on a smart card work?How does this wallet code work if it is successfully implemented ? Does it have like some GUI which prompts the user to enter the pin?
Wallet code for reference :
package com.sun.javacard.samples.wallet;
import javacard.framework.*;
public class Wallet extends Applet {
/* constants declaration */
// code of CLA byte in the command APDU header
final static byte Wallet_CLA =(byte)0x80;
// codes of INS byte in the command APDU header
final static byte VERIFY = (byte) 0x20;
final static byte CREDIT = (byte) 0x30;
final static byte DEBIT = (byte) 0x40;
final static byte GET_BALANCE = (byte) 0x50;
// maximum balance
final static short MAX_BALANCE = 0x7FFF;
// maximum transaction amount
final static byte MAX_TRANSACTION_AMOUNT = 127;
// maximum number of incorrect tries before the
// PIN is blockedd
final static byte PIN_TRY_LIMIT =(byte)0x03;
// maximum size PIN
final static byte MAX_PIN_SIZE =(byte)0x08;
// signal that the PIN verification failed
final static short SW_VERIFICATION_FAILED =
0x6300;
// signal the the PIN validation is required
// for a credit or a debit transaction
final static short SW_PIN_VERIFICATION_REQUIRED =
0x6301;
// signal invalid transaction amount
// amount > MAX_TRANSACTION_AMOUNT or amount < 0
final static short SW_INVALID_TRANSACTION_AMOUNT = 0x6A83;
// signal that the balance exceed the maximum
final static short SW_EXCEED_MAXIMUM_BALANCE = 0x6A84;
// signal the the balance becomes negative
final static short SW_NEGATIVE_BALANCE = 0x6A85;
/* instance variables declaration */
OwnerPIN pin;
short balance;
private Wallet (byte[] bArray,short bOffset,byte bLength) {
// It is good programming practice to allocate
// all the memory that an applet needs during
// its lifetime inside the constructor
pin = new OwnerPIN(PIN_TRY_LIMIT, MAX_PIN_SIZE);
byte iLen = bArray[bOffset]; // aid length
bOffset = (short) (bOffset+iLen+1);
byte cLen = bArray[bOffset]; // info length
bOffset = (short) (bOffset+cLen+1);
byte aLen = bArray[bOffset]; // applet data length
// The installation parameters contain the PIN
// initialization value
pin.update(bArray, (short)(bOffset+1), aLen);
register();
} // end of the constructor
public static void install(byte[] bArray, short bOffset, byte bLength) {
// create a Wallet applet instance
new Wallet(bArray, bOffset, bLength);
} // end of install method
public boolean select() {
// The applet declines to be selected
// if the pin is blocked.
if ( pin.getTriesRemaining() == 0 )
return false;
return true;
}// end of select method
public void deselect() {
// reset the pin value
pin.reset();
public void process(APDU apdu) {
// APDU object carries a byte array (buffer) to
// transfer incoming and outgoing APDU header
// and data bytes between card and CAD
// At this point, only the first header bytes
// [CLA, INS, P1, P2, P3] are available in
// the APDU buffer.
// The interface javacard.framework.ISO7816
// declares constants to denote the offset of
// these bytes in the APDU buffer
byte[] buffer = apdu.getBuffer();
// check SELECT APDU command
if (apdu.isISOInterindustryCLA()) {
if (buffer[ISO7816.OFFSET_INS] == (byte)(0xA4)) {
return;
} else {
ISOException.throwIt (ISO7816.SW_CLA_NOT_SUPPORTED);
// verify the reset of commands have the
// correct CLA byte, which specifies the
// command structure
if (buffer[ISO7816.OFFSET_CLA] != Wallet_CLA)
ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
switch (buffer[ISO7816.OFFSET_INS]) {
case GET_BALANCE:
getBalance(apdu);
return;
case DEBIT:
debit(apdu);
return;
case CREDIT:
credit(apdu);
return;
case VERIFY:
verify(apdu);
return;
default:
ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
} // end of process method
private void credit(APDU apdu) {
// access authentication
if ( ! pin.isValidated() )
ISOException.throwIt(SW_PIN_VERIFICATION_REQUIRED);
byte[] buffer = apdu.getBuffer();
// Lc byte denotes the number of bytes in the
// data field of the command APDU
byte numBytes = buffer[ISO7816.OFFSET_LC];
// indicate that this APDU has incoming data
// and receive data starting from the offset
// ISO7816.OFFSET_CDATA following the 5 header
// bytes.
byte byteRead =
(byte)(apdu.setIncomingAndReceive());
// it is an error if the number of data bytes
// read does not match the number in Lc byte
if ( ( numBytes != 1 ) || (byteRead != 1) )
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
// get the credit amount
byte creditAmount = buffer[ISO7816.OFFSET_CDATA];
// check the credit amount
if ( ( creditAmount > MAX_TRANSACTION_AMOUNT)
|| ( creditAmount < 0 ) )
ISOException.throwIt(SW_INVALID_TRANSACTION_AMOUNT);
// check the new balance
if ( (short)( balance + creditAmount) > MAX_BALANCE )
ISOException.throwIt(SW_EXCEED_MAXIMUM_BALANCE);
// credit the amount
balance = (short)(balance + creditAmount);
} // end of deposit method
private void debit(APDU apdu) {
// access authentication
if ( ! pin.isValidated() )
ISOException.throwIt(SW_PIN_VERIFICATION_REQUIRED);
byte[] buffer = apdu.getBuffer();
byte numBytes =
(byte)(buffer[ISO7816.OFFSET_LC]);
byte byteRead =
(byte)(apdu.setIncomingAndReceive());
if ( ( numBytes != 1 ) || (byteRead != 1) )
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
// get debit amount
byte debitAmount = buffer[ISO7816.OFFSET_CDATA];
// check debit amount
if ( ( debitAmount > MAX_TRANSACTION_AMOUNT)
|| ( debitAmount < 0 ) )
ISOException.throwIt(SW_INVALID_TRANSACTION_AMOUNT);
// check the new balance
if ( (short)( balance - debitAmount ) < (short)0 )
ISOException.throwIt(SW_NEGATIVE_BALANCE);
balance = (short) (balance - debitAmount);
} // end of debit method
private void getBalance(APDU apdu) {
byte[] buffer = apdu.getBuffer();
// inform system that the applet has finished
// processing the command and the system should
// now prepare to construct a response APDU
// which contains data field
short le = apdu.setOutgoing();
if ( le < 2 )
ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
//informs the CAD the actual number of bytes
//returned
apdu.setOutgoingLength((byte)2);
// move the balance data into the APDU buffer
// starting at the offset 0
buffer[0] = (byte)(balance >> 8);
buffer[1] = (byte)(balance & 0xFF);
// send the 2-byte balance at the offset
// 0 in the apdu buffer
apdu.sendBytes((short)0, (short)2);
} // end of getBalance method
private void verify(APDU apdu) {
byte[] buffer = apdu.getBuffer();
// retrieve the PIN data for validation.
byte byteRead = (byte)(apdu.setIncomingAndReceive());
// check pin
// the PIN data is read into the APDU buffer
// at the offset ISO7816.OFFSET_CDATA
// the PIN data length = byteRead
if ( pin.check(buffer, ISO7816.OFFSET_CDATA,
byteRead) == false )
ISOException.throwIt(SW_VERIFICATION_FAILED);
} // end of validate method
} // end of class Wallet
Any help on this would highly appreciated !! :)

Hi,
Thanks a lot for reply.But I am not sure as to how can I delete the simulator.
All I want to do is write a pin on the smart card and verify it.But I am not being able to deploy the cap file or initiate the applet.
Also for passing the pin correct me if I am wrong........ according to what you said and what I have understood
If the code is like this :
public static void install(byte[] bArray, short bOffset, byte bLength) {
// create a Wallet applet instance
new Wallet(bArray, bOffset, bLength);
} // end of install method
byte aLen = bArray[bOffset]; // applet data length
// The installation parameters contain the PIN
// initialization value
pin.update(bArray, (short)(bOffset+1), aLen);
Lets say my pin is : 1234
then I would pass it here.....
new Wallet(bArray, 1234, bLength);

Additional licence for pdf form completion?

Hi,
I apologise if this is the wrong place to ask my question - please redirect me if it is.
Years ago I used Adobe professional (I don't remember the version number) and I could create forms for others to complete, however if the other person did not have Professional the forms did not work.
I now work for a different organisation and would like to revisit this, but in my previous workplace there was a £10,000 licence that had to be purchased in order to allow the functionality for Reader users to be able to complete the forms.
Am I correct in thinking that Adobe X Pro has this functionality built in and no further licencing is required?
Many thanks,
Su

What you're talking about is Reader-enabling your form, which allows Reader to do things it normally cannot, such as saving a filled-in form. Without this additional step, Reader can be used to interact with the fields, print, and submit form data, but cannot save.
If you Reader-enable a document with Acrobat and distribute it to more than 500 users, you can use data from no more than 500 forms that have been returned to you, including hard copies. If the users don't need to save, you don't need to Reader-enable the document. If you don't need the entire filled-in form returned to you, you can set up the form to submit just the form data to you, via web server or email.
If you do need to have the users send the complete filled-in document to you and you need to distribute the form to more than 500 users, you will need to license LiveCycle Reader Extensions. The exact cost depends on your intended usage.

ITunes can't verify my address to complete a purchase. My iTunes account and the credit card account both have the correct info, What's up?

iTunes can't verify my address to complete a purchase. I went to my account (iTunes) and it has all the correct info. I re-entered everything in iTunes just to make sure and then did the same with credit card account. Still no good. Message "We couldn't verify your address. Make sure you've entered the correct blah blah blah" This account is 7 years old! what could the problem be?

Woooooow, that is the most ridiculous thing I've ever seen... I searched my address and apparently they decided to add a "Rd" to the end of my street name... I've NEVER used that before for my address, but as soon as I typed it into my iPad, it FINALLY let me in. SOOOO silly! Just go to this USPS site and type in your addy. It will verify ALL of your entire address and make you ALL of that is typed into your Apple device, because they have become address Nazi's to make sure everything matches. http://zip4.usps.com/zip4/welcome.jsp
Hope this helps everyone else! Thanks, Athena Carey!

Looking to verify user before form completion

Similar Messages

Maybe you are looking for