Lookup from an ODS

Hi Guys,
I have included few key figures (Cumulatives) into the Inventory Cube. I want to populate the data to them via update routines with a lookup from an ODS from which the values for these key figures are coming. Please help me with a sample routine for this.
Thanks a lot in advance...

Hi,
First of all you should know what is the key infoobject between two infoproviders. then based upon that you can write a simple routine to fetch data for the key figure.
Cheers,
Malli....

Similar Messages

Unable to load data from an ODS to a Cube

Hi all,
I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: "No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.
I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
Thank you very much and kind regards,
MM.
May be this helps...
When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
Thanks again.

Hello MM,
Can you do the following..
make the Total status Red Delete the request from cube.
goto ODS -> Remove the Data Mart Status -> Try loading it again.
The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
Hope it will help!

InfoCube Modelling-Adding data from different ODS's on to the Infocube

Hi Experts,
I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
For Example.
I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
I will make it clear.
I have a record in CUBE already containing Fields- : Delivery no, field_a, field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
Will the value in this info-object get overwritten ?
OR.. will it combine the data from both the ODS's and show it as ONE record ???
Please advice ... How will I solve this scenario ?
Thanking You in Advance
Shyne Sasimohanan

Answer for your question and the suggestion.
the data will look like as given below
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            0           0            0            0
11233          0           0          0             0           1           1           1          1
but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            1           1           1          1
Regards,
Siva A

How to load data from a ODS to CUBE Request ID - by - Request ID?

How to load data from a ODS to CUBE Request ID - by - Request ID?
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "data mart status of request" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

Error while loading data from one ODS to anther ODS

Hi all,
while loading the data from one ODS to another ODS, we are getting error message - Error: No match found in target. No Space on ODS.
I have done a runstat on these tables of the ODS.. but the issue repeated.
Can anyone tell how do we solve this issue.

Check if you get any other Dump message in ST22 to see if it is due to some space availability in the DSO or underlying tables.
Or Post in detail if any other errore message is available.

Error Message when loading an ODS from an ODS

Within a process chain we are loading an ODS from another ODS. This fails with the following message:
Job REQU_49HIKNN81WXVPRI80DC2TVCUF removed from periodical scheduling and terminated
Message no. RSM1170
Diagnosis
An end-date for the job is specified when the job is scheduled (no longer "start after date/time").
When the job is started for the first time, this end-date is applied to ALL subsequent periodical jobs.
This is different to the standard R/3 batch schedulings.
The end-date is checked each time the job is restarted, and if the end-date has passed, the job is removed from the schedule.
This is what has happened in this case.
Procedure
Reschedule the job if you want to keep it running.
Does anyone know where I can see/change the end date for this job or how I reschedule it?

Dear Barry,
1) Just go and make your req Red both n Data target and PC
2)Delete the error request
3)Get the Infopackage from PC header.
4)reshedule it again
Hope it solves your problem
Assign points if helpful
Regards
Bala

Java RFC lookup from XSLT mapping

I tried to implement a generic Java RFC Lookup class to be called as a Java extension from my XSLT mapping. I found the How-To-Guide "Easy RFC lookup from XSLT mappings using a Java helper class" ([Easy RFC lookup pdf site|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14?quicklink=index&overridelayout=true]) and tailored the source code to my XSLT program. I am getting the error "Variable '$inputparam' has not been bound to a value". Can anyone tell me what I am missing? I am not familiar with java at all, and only moderately familiar with XSLT.

> I am getting the error "Variable '$inputparam' has not been bound to a value". Can anyone tell me what I am missing?
At runtime the variable does not get value. You need to assign value to the variable inputparam. Just curious why dont use the RFC lookup graphical which is very easy and no need to handle java programming. You need to configure just reciever RFC communication channel.

Code Sample: Easy RFC Lookup From XSLT Mappings Using a Java Helper Class

Hi everyone,
This is just a shameless plug for my article: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14">Easy RFC Lookup From XSLT Mappings Using a Java Helper Class</a>. I hope you're interested in reading it, and I welcome your comments in this thread.
Kind regards,
Thorsten

Hi Stefan. Thanks for your post. I have already done that. It still does not work. As a base for my java helper class I have usesd Thorstens code.
The problem is quite confusing. I will try to ouline both issues here.
First of all, when try to test from within the Operation Mapping, I always get a java error saying it cannot find the communication channel (it is there and working because I have tested it with the RFCLookup in graphical mapping). I have found a way to work around this, and that is to uncheck the "Use SAP XMLToolkit" checkbox --> switch to test tab, enter my ReceiverService in the parameter tab (header parameter) --> switch back to Definition tab, check the "Use SAP XMLToolkit" checkbox --> switch to Test tab and run the test. Then the XSLT and call to java helper class will work. Of course this is not really something you want to do all the time. Maybe there is a bug.
Secondly, it never works when I try to do it "live". I am using a file adapter to pick up one file, convert it and a file adapter to drop the converted file. I get the following error code in SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>ATJ_Accounting2XML_Accounting.xsl</SAP:P1>
<SAP:P2>http://rd.accounting.logica.com</SAP:P2>
<SAP:P3>fd552c30-bad9-11dd-9761-c21dac1b818c</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>TransformerConfigurationException triggered while loading XSLT mapping ATJ_Accounting2XML_Accounting.xsl; http://rd.accounting.logica.comfd552c30-bad9-11dd-9761-c21dac1b818c-1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Using an XSLT without a call to a java helper class, works just fine.
I am totally at a loss here. Any more input would be much appreciated.
/Patrik

Can we test RFC lookup from IR?

Hi All,
Can we test RFC Lookup from IR-Message mapping? If yes How?
Like we can test Graphical mapping in test tab of Message Mapping.
Regards

Hi Sarvesh,
got it...
But when I am displaying queue.
I am getting POPUP window saying -->
Problem When Displaying Queue
Cannot perform RFC lookup
Can you please guide how to resolve this?
Since RFC Lookup in run time uses Receiver RFC adapter.
I tested RFC adapter is configured properly.
Regards

Query regarding the data type for fetcing records from multiple ODS tables

hey guys;
i have a query regarding the data type for fetcing records from multiple ODS tables.
if i have 2 table with a same column name then in the datatype under parent row node i cant add 2 nodes with the same name.
can any one help with some suggestion.

Hi Mudit,
One option would be to go as mentioned by Padamja , prefxing the table name to the column name or another would be to use the AS keyoword in your SQL statement.
AS is used to rename the column name when data is being selected from your DB.
So, the query Select ename as empname from emptable will return the data with column name as empname.
Regards,
Bhavesh

"Providing interactive database lookup from forms" sample doesn't work with Acrobat Reader 7

I have downloaded and tested the Adobe sample "Adobe LiveCycle Designer 7.0, Providing interactive database lookup from forms". Everything works great in Acrobat Professional Full version, however, when I tested it in Acrobat Reader 7.0.5, it generated a "script failed..." message.
Did anybody have the same problem? You can download the sample from here:
http://partners.adobe.com/public/developer/en/livecycle/lc_designer_db_lookup_tip.pdf
Thanks a lot in advance!
Jie

Hi Jie,
Database connectivity is a feature supported in Acrobat only , not Reader--unless the PDF has been extended with Adobe LiveCycle Reader Extensions.
http://www.adobe.com/products/server/readerextensions/main.html
See "Table 3: Form capability support for Adobe Acrobat and Adobe Reader" at:
http://partners.adobe.com/public/developer/en/tips/lc_combine_server_tip.pdf
Evangelos

Data upload problem in delta update from 1st ODS to 2nd ODS

Dear Friends,
I am loading data from one ODS to another. The update mode was full upload. Sometime back an error occurred in activation of the first ODS. The error was: Full updates already available in ODS ,Cannot update init./delta. So currently daily records are pulled but not added i.e. transferred recs = 4000 but added recs = 0.
When I looked for a solution in SDN I found that using program RSSM_SET_REPAIR_FULL_FLAG for 2nd ODS will reset all full uploads to Repair Full Request which I have already done for 2nd ODS. Then initialize once and pull delta.
But problem is that I cannot set update mode to delta as I am pulling some 80,000 records in 2nd ODS from 1st ODS with around 14 lacs records daily based on some data-selection filters in infopkg. But do not see any parameters for data-selction in delta mode.
Please suggest.
Regards,
Amit Srivastava

Dear Sirs,
Due to this error in activation in 2nd ODS daily data upload is failing in 1st ODS.
To correct this I converted all full upload requests in 2nd ODS to Repair full requests.
But now when I scheduled the infopkg today with full upload again data was transferred but not added.
I know I cannot have init./ delta so what possibly can now be done in this scenario. Please help.
Regards,
Amit Srivastava

How to store as single record data coming from different ods to cube

Hi All,
we have the scenario like .
Same contract values are uploaded from 3 ods to cube.In the cube this information is stored as 3 different records.
Is there any option having same contract no and same fiscal period values should be stored as single record in cube.
Thanks in advance.
Regards,
Shradda.

Hi Shradda,
On Performance Side .....consider below points
1. Indexes on Cube ( That delete indexes before load and create them after Load ).
2. Aggregate Design ( Decision on Base Aggregates, roll up Hierarchy , BW Statistics etc ).
3. Partition of InfoCube ( Basically decision on No. of Partition )
4. Data Package Size ( Always try to have larger Data Package so that preaggreation will reduce the no. of Data Records ).
Best is Service.sap.com on BI page u will find material for performance . THat will help you .
To assign points on the left of screen u will get radio buttons for assigning points for each person who has responded .
Regards,
Vijay

Document currency is blank in 2nd ODS after loaded from 1st ODS!

1st ODS contains the document currency field and each record does have the value for it. In the update rule from 1st ODS to 2nd ODS, there is only two fields populated, one is the document currency (the update type is Overwrite for this unit and there are only two update types for this unit: one is Overwrite and the other one is No Update), the other one is a KF field and it's update type is Addition. After performing the initial load from 1st ODS to 2nd ODS, the KF field values are fine, but the Document Currency value is blank for each record. The Document Currency field in the update rule takes the update method of Source field from 1st ODS.
Any clue on why this Document Currency is blank in 2nd ODS and any solution?
Thanks!

hi Ravi,
There should be no any transfer rule from one ODS to another. In the update rule, our 1st post has already clearly stated that the update type is Overwrite for Document Currency. Sorry, we can't give you any reward points since you didn't carefully read our post!
Thanks

Load from 3 ODS to 1 cube

Hello All,
Our requirement is to load the cube from 3 ODSs. Each time we are loading the data from the 3 ODS to Cube the load gets failed due to job getting terminated in the source system.
POP UP for the ERROR:
Express document generated error in data selection Check load from Author.
ERROR TERMINATED:
Job in source system terminated --> Request is set to red.
Message no. RSM078
We think There is Some problem in the data selection from the ODS.
Please suggest us some solution for this.OR a check list for loading the data from 3 ODS to a cube.
Thanks & Regards,
Pallavi.

Check SAP Note: 869445.
Check this:
Job terminated in source system --> Request set to red
Load data into InfoCube 0FIGL_C10
Thanks

Lookup from an ODS

Similar Messages

Maybe you are looking for