LookupField Query Issue in Workflow LookupSPListItemId Activity

I am using LookupSPListItemId workflow activity to query a list on the basis of Lookupfield column . But it gives error that column does not exist. Please help.

Hi,
Please check the links below:
Common error messages in SharePoint workflow development
http://msdn.microsoft.com/en-us/library/office/dn449112(v=office.15).aspx
Lookup Activities in Visual Studio 2012
http://sp2013workflows.blogspot.kr/2013/07/lookup-activities-in-visual-studio-2012.html
If the issue still exists, I suggest you provide more information for further research.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Similar Messages

CAT2 - Issue with workflow task TS20000460

Reposting the query in ABAP General Section.
CAT2 - Issue with workflow task TS20000460
Waiting for any suggestion?
Edited by: Amit Khare on Sep 10, 2009 3:01 PM
Closing due to no responses.
Edited by: Amit Khare on Sep 10, 2009 3:40 PM

Hi,
Could you figure out why the event linkage is breaking when you make it Gen.Task? I think, there is some problem in your wflow template. May be do a Syntax Check in the testing environment. If that time, some error happens, then by the System Defaults in the Event linkage SWETYPV, it will deactivate the linkage.
I don't think this has got anything to do with you making TS as Gen.Task. Did you see the even trace to see what's the error for linkage breaking ?
More info. would help in identifying the issue.
Regards,
venu

Tax query builder with "workflow status" property

Hi,
is it possible to create a tax query builder with "workflow status" property? For example: folder A only with documents "Relased", folder B only with document "In progress"?
In property meta data I saw that there is a property "cm_workflowState", I made it indexable, but it doesn't work....
thanks,
Paolo

Hi,
Thanks to share your post.
For the issue, I think it may due to the wrong handling of the encoding type “UTF-8”, please refer to the followed article, they may give you a hand:
http://blogs.sun.com/shankar/entry/how_to_handle_utf_8.
http://devlog.info/2008/08/24/php-and-unicode-utf-8/.
Hope this could help you!
Leo

Dataset query issues twice if the dataset is connected to matrix and used in multilookup function

hello everybody.
could not find any information if this is an intended behavior:
dataset query issues twice if the dataset is connected to matrix and used in multilookup function
parameters in both queries are the same
ssrs: 2008 r2, sharepoint 2010 integrated
sharepoint 2010: september 2014 cu
thanks in advance
Sergey Vdovin

Hello, Wendy.
I prepared a very empty sample report for you to demonstrate the problem - with this report, i hope, there is no place to discuss the shrinking of time data retrieval.
There is one dataset, one parameter and one lookup function. The query is executed twice.
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns:cl="http://schemas.microsoft.com/sqlserver/reporting/2010/01/componentdefinition" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>http://t005/ProjectBICenter/DocLib/IntegrationDBVdovin.rsds</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>7e554344-d6c2-48a5-a7f4-1d24608cb4b5</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<CommandText>select 1 as temp, '$' as tempname</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="temp">
<DataField>temp</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="tempname">
<DataField>tempname</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportSections>
<ReportSection>
<Body>
<ReportItems>
<Textbox Name="ReportTitle">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Lookup(1,Fields!temp.Value,Fields!tempname.Value,"DataSet1")</Value>
<Style>
<FontFamily>Verdana</FontFamily>
<FontSize>20pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:WatermarkTextbox>Title</rd:WatermarkTextbox>
<rd:DefaultName>ReportTitle</rd:DefaultName>
<Top>0mm</Top>
<Height>10.16mm</Height>
<Width>139.7mm</Width>
<Style>
<Border>
<Style>None</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</ReportItems>
<Height>57.15mm</Height>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</Body>
<Width>152.4mm</Width>
<Page>
<PageFooter>
<Height>11.43mm</Height>
<PrintOnFirstPage>true</PrintOnFirstPage>
<PrintOnLastPage>true</PrintOnLastPage>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</PageFooter>
<PageHeight>29.7cm</PageHeight>
<PageWidth>21cm</PageWidth>
<LeftMargin>2cm</LeftMargin>
<RightMargin>2cm</RightMargin>
<TopMargin>2cm</TopMargin>
<BottomMargin>2cm</BottomMargin>
<ColumnSpacing>0.13cm</ColumnSpacing>
<Style />
</Page>
</ReportSection>
</ReportSections>
<ReportParameters>
<ReportParameter Name="ReportParameter1">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>1</Value>
</Values>
</DefaultValue>
<Prompt>ReportParameter1</Prompt>
<ValidValues>
<DataSetReference>
<DataSetName>DataSet1</DataSetName>
<ValueField>temp</ValueField>
<LabelField>tempname</LabelField>
</DataSetReference>
</ValidValues>
</ReportParameter>
</ReportParameters>
<rd:ReportUnitType>Mm</rd:ReportUnitType>
<rd:ReportServerUrl>http://t005/ProjectBICenter</rd:ReportServerUrl>
<rd:ReportID>cd1262ef-eca7-4739-a2ce-d3ca832d5cd6</rd:ReportID>
</Report>
Sergey Vdovin

Issues about Windows Azure Active Directory

issues about Windows Azure Active Directory

Hello,
Microsoft Azure forums are over here:
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/home?category=windowsazureplatform%2Cazuremarketplace%2Cwindowsazureplatformctp
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Web Query issues

Hi All,
I have created a web query and assigned it to a role. I have moved the role, web templete and the query from dev to QA was able run the query fine without issues.
The problem I am having is when I make changes to the query and transport it to QA...when I run the query from the role menu it still shows the old query instead of the changed query.
Can someone please explain what are the steps I need to take when I make changes to exsisting web query in dev and move to QA and be able to see the changes. What are all the objects I need to collect. Also would like to know if there are any settings on the role menu or web templete that need to be changed and also any buffers that I need to cleared??
Any help is appriciated and will give max points.
Thanks

BWdesi,
please avoid reposts - it could be that due to network issues the post got posted twice... close one of them as answered and then proceed with the other one...
Web Query issues
Arun

HT4943 I paid to subscribe to Ski Mag and Ski Racing but neither subscription has ever updated beyond the first issue. Subscription is active but there never is a new mag...

I paid to subscribe to Ski Mag and Ski Racing but neither subscription has ever updated beyond the first issue. Subscription is active but there never is a new mag...
They got the money but there is no monthly subscription and it says the subscription will expire in Feb!

Hello ISXDesign,
Thanks for the question, and welcome to Apple Support Communities. I understand that you are having issues redeeming a subscription that you have paid for. The best option will be to report an issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Thanks,
Matt M.

Query issue

I had query issue on planning layout
Sold    mat   price   qty   amount
100      3        5        5          25    layout 1
100      4       10       5          50    layout2
when I should removed material cal has to come like this
100             15        10          75
but I getting value like
100        15       10       150
can u plz tell me how to slove this
regards
raju

Dear Raju,
In the query, for the Calculated Key Figure (Amount)
   Select properties, enhanced and change to:
                      "BEFORE AGGREGATION"
It seems to be doing after aggregation, which is default.
it is aggregating:
    price = 5+10 = 15
    qty   = 5+5 = 10
    Amount = 15 * 10 = 150
Good luck, BB

Query on Planning WorkFlow Process

Hi Guys,
I have a query on Planning WorkFlow Process i.e Two Business Units are willing to do their Budgeting & Forecasting Process in different periods.
I would like to bring first one process for this and I would like to grant access for these two business units accordingly.
Will it be any problem doing like this? If not please suggest me what is the best approach for this.
Thanks,
Suresh.

Hello Suvin,
You can try to check the value for your return sales order with T-code MB51
Go to MB51 Enter Movement type 651 execute..
Next screen Press Ctrl + Shift + F12 . It will take you to next screen..
In this screen use Ctrl + F8, you will get field Column selection Popup..
in that Choose " Amount in LC" & Sales Value.
With this you will get the value. If the value is Zero then it means that the return stock from customer is non valuated.
Note:
T.Code MB52 : Display Warehouse stock of Material in Hand.
App:lication
You use this report to display the total stock of a material (quantity and value) at plant and storage location level. If transit stocks or stock transfer stocks exist at plant level, the system totals these stocks and displays them in the column In Stock Transfer in a stock line without a storage location.
Note that in this report, the stock value of the warehouse stock is calculated using the following simplified formula:
Stock value = quantity x value/valuated stock
Therefore the stock value specified here only has informal characters and does not represent the actual stock value.
Br,
Tushar
Edited by: Tushar Patankar on Jan 11, 2011 6:28 PM

Physical query issued by Obiee when cache is on is different and slow

When the same report runs in OBIEE 10g and cache is OFF it takes less then 1min to get results. If cache is turned ON physical query issued by Obiee is totally different and it takes 2h to get results. Has anyone experienced this with having cache on that some queries are performing poorly.
Thanks,
Tatjana

We are using BI Apps Order Management and Fulfillment Analytics and all tables are cached anyway. Dimensions used are not that huge up to 40K rows. What should I check when it comes to DB query? As I said is different than one generated when cache is disabled although both have the almost the explain plan.

How can we find workflow templates activated ina system ?

how can we find workflow templates activated ina system ?
Could you please tell me a table name for that ?
thanks

Hello ,
I need the active workflow templates regardless of business object,event or template etc
So I used method suggested by Mohammad Anwar and checked the table HRS1205
Here I find a long list of active workflow templates
But further to that I need to find which workflows have been activated and implemented to meet business requirement and put to use in the system.
For this I checked the SWI1 in production system to get an idea of what all workflows are active.This will give day to day data.
But if I need to find the same in HRS1205 table then can I consider those entries of active workflows for which UNAME field is not standard SAP userID but a dialog user ID of any user ?
thank you

Issue in workflow workitem that gets triggered to two users at one time.

Hi All,
Below are the query details:
Module: HR
Area:      Workflow
Process: Hiring
There is an workflow in HR module that is triggered when an hiring action is run against an candidate.
There are two or three maximum approvers which is based on the position to which the candidate is hired.
Issue:
During the hiring process some times the workitem is getting triggered to two users at once.
One is the actual approver who should receive the workitem in his UWL and other is the user of our service center who is no where involved in the approval process.
Analysis Done:
We checked the workflow log and found that the actual approver's ID is getting displayed under agent and workflow is complete. But the other user's ID is no where shown in the log but he has received an workitem in his UWL that makes the issue still confusing.
Awaiting for experts suggestions.

Reply to Susan Questions:
You say that 'the workitem is getting triggered to two users at once' - do you mean that there are two workflow instances that are being kicked off at the same time when the hiring action is performed? Or is it that the workflow is generating two tasks that go to these different users?
Ans : There is a single task attached to the activity.
Is this a custom workflow?
Ans : Yes.
Are you certain that the erroneous task is only going to the user in the service center, or is it perhaps going to everybody (marked as a general task)?
Ans : The task is marked as general but the workitem is received by only one user of the service center at a time.
         As this issue has taken place 4 times in the past year all the 4 receiver were different belonging to different position.
Reply to Pavan Questions:
1. Did you try to check the SPRO settings with respect to Hiring Process ,is there any where based on the position does workflow is forwarding the workitem to the other user.
2. Check the other user Roles and in the Org Structure where he is located , there could be a possibility of wrong position holding.
Ans : We checked the org structure, but org structure of both the centers are different and independent there is no linkage    between the two.
*3. IF you are using custom workflow then check if any standard workflow is also getting triggered. Check *
Ans : Yes this is a custom workflow, but no other Standard workflow is being called.
4. Check in the SWEHR3 is any custom entries maintained.
Ans : No, entries are maintained in SWEHR3.
Additional Info :
The task that triggers the workitem has an send mail step before it.
The send mail activity is to notify receiver that there is an workitem lying in the UWL.This mail is received by the actual user and not by the other one.The next step is the task that creates workitem which gets triggered totwo different IDs.
This scenarios mostly has come up when the number of approver is 1. If the approver is more than 1 the workflow runs fine without deviating the workitem to any worng user.

Urgent: Issue with Java Embedding Activity

Hi All,
I wrote below code in Java Embedding activity and tried to pass an input paramter to String SR, but i am getting SCAC-50012 Error, some one please help me in this issue
IAgileSession m_session = null;
IAdmin admin = null;
IAgileClass cls = null;
String username="XXXX";
String password="XXXXX";
String URL="XXXXXXX";
String sr=getVariableData("inputVariable","payload","/client:process/client:input");
try {
HashMap params = new HashMap();
params.put(AgileSessionFactory.USERNAME, username);
params.put(AgileSessionFactory.PASSWORD, password);
AgileSessionFactory instance = AgileSessionFactory.getInstance(URL);
m_session = instance.createSession(params);
admin = m_session.getAdminInstance();
cls = admin.getAgileClass( "ProblemReport" );
IServiceRequest psr = (IServiceRequest)m_session.createObject( "ProblemReport", sr);
psr.setValue(ServiceRequestConstants.ATT_COVER_PAGE_DESCRIPTION, "KB-Test-20121299");
} catch (APIException e) {
e.printStackTrace();
} finally {
m_session.close();
Also, I imported all Jar and class files into BPEL.

Hi,
Now the it is compiling perfectly, but when i am passing input parameter in em it is failing at bpel process.
This is the bpel code
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="BPELProcess1"
targetNamespace="http://xmlns.oracle.com/AgileTest/Testing123/BPELProcess1"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:client="http://xmlns.oracle.com/AgileTest/Testing123/BPELProcess1"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:aia="http://www.oracle.com/XSL/Transform/java/oracle.apps.aia.core.xpath.AIAFunctions"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpel2="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap">

<partnerLinks>

<partnerLink name="bpelprocess1_client" partnerLinkType="client:BPELProcess1" myRole="BPELProcess1Provider"/>
</partnerLinks>

<variables>

<variable name="inputVariable" messageType="client:BPELProcess1RequestMessage"/>
</variables>

<sequence name="main">

<receive name="receiveInput" partnerLink="bpelprocess1_client" portType="client:BPELProcess1" operation="process" variable="inputVariable" createInstance="yes"/>
<assign name="Assign1">
<copy>
<from variable="inputVariable" part="payload"
query="/client:process/client:input"/>
<to variable="inputVariable" part="payload"
query="/client:process/client:input"/>
</copy>
</assign>
<bpelx:exec import="org.w3c.dom.Element"/>
<bpelx:exec import="com.agile.api.APIException"/>
<bpelx:exec import="com.agile.api.AgileSessionFactory"/>
<bpelx:exec import="com.agile.api.IAdmin"/>
<bpelx:exec import="com.agile.api.IAgileClass"/>
<bpelx:exec import="oracle.xml.parser.v2.*"/>
<bpelx:exec import="com.agile.api.IAgileSession"/>
<bpelx:exec import="com.agile.api.IServiceRequest"/>
<bpelx:exec import="com.agile.api.ServiceRequestConstants"/>
<bpelx:exec import="java.util.HashMap"/>
<bpelx:exec import="testing123.JavaAPITesting.*"/>
<bpelx:exec import="oracle.soa.common.util.Base64Encoder"/>
<bpelx:exec import="java.util.*"/>
<bpelx:exec import="java.lang.*"/>
<bpelx:exec import="java.math.*"/>
<bpelx:exec name="Java_Embedding1" version="1.5" language="java">
<![CDATA[IAgileSession m_session = null;
            IAdmin admin = null;
            IAgileClass cls = null;
            String username="****";
            String password="*******";
            String URL="*****************************************";
            String sr=(String)getVariableData("inputVariable","payload","/client:process/client:input");
            try {
                    HashMap params = new HashMap();
                    params.put(AgileSessionFactory.USERNAME, username);
                    params.put(AgileSessionFactory.PASSWORD, password);
                    AgileSessionFactory instance = AgileSessionFactory.getInstance(URL);
                    m_session = instance.createSession(params);
                    admin = m_session.getAdminInstance();
                    cls = admin.getAgileClass( "ProblemReport" );
                    IServiceRequest psr = (IServiceRequest)m_session.createObject( "ProblemReport", sr);
                    psr.setValue(ServiceRequestConstants.ATT_COVER_PAGE_DESCRIPTION, "KB-Test-20121299");
            } catch (APIException e) {
e.printStackTrace();
} finally {
m_session.close();
}]]>
</bpelx:exec>
</sequence>
</process>

Version issue in Workflow

Hi,
I have made changes to a workflow in Development and moved it to Quality.
After transportation in quality, its keeping on generating new version number .
i got almost 20 new versions. Still it is increasing time to time.
What could be the issue ?

hi
When we tranport a req to DEV to Quality ,then new version is created in Quality .
but as you say "one req is being transported but its creating version continuously"
I thing there some problem in transportation process , ask yr Basis person.
and one thing you can check
for any two version (which is created by your request ) compare :
pftc_dis-> go to yr WF ->WF builder -> Basic data ->VersionOverview ->
compare change by , date ,time ,release of these version with yr DEV WF templet data .
the active version should be same as yr DEV WF .
perhaps you will get some clue.
thanks
kakoli

Issue in workflow binding of Table in send mail step

Hi All,
I am working on a Travel Management workflow where mail needs to be sent to the manager along with the trip details.
We are displaying data in tables (html format). Now i need to add another such table with details into this already existing workflow but i am facing issues in binding.
Issue: For already existing tables, the binding is like this,
Export to task,
&TRIP& --> &T_SUMMARY##&
Import to w/f,
&T_SUMMARY##& <--- &T_SUMMARY##&.
But when i am trying to add my table in binding as, &TRIP& --> &T_MILEAGE##&,
I am getting a binding error, &T_MILEAGE##& is not available in the container.
I checked the container both in workflow and in task, both contain multiple declarations of the variable &TRIP& which is of type the BO.
Kindly help me how to proceed further.
Regards,
Jose

Hi Anjan,
The status of note 1658491 is also cannot not be implemented.
I checked the correction given in this note. All changes exists into system.
Following is code of method SEND ( (CL_SWF_UTL_MAIL_FACADE)
*- check if document has recipients at all
       lt_recipients = lo_send_request->recipients( ).
       if lt_recipients is initial.
         lo_send_request->delete( ).
         ls_t100msg-msgid = 'WZ'.
         ls_t100msg-msgty = 'E'.
         ls_t100msg-msgno = 619.
         raise exception type cx_swf_run_wim
           exporting
             t100_msg = ls_t100msg.
       else.
*-       Send document
         call method lo_send_request->send( ).
       endif.
The exception is thrown, because lt_recipients table is blank.
With same parameter the workflow is running successfully if 'Long mail title' is not set in SWPA.
When is field is active, workflow returns message Document <> could not be sent
The method "SELFITEM->SendTaskDescription" does not send mail if Long Mail Title" indicator is set .
Thanks & Regards,
Mounj K

LookupField Query Issue in Workflow LookupSPListItemId Activity

Similar Messages

Maybe you are looking for