Looping through to the last child in the ADG groupedColumn

I have a ADG with groupedColumns with varying depth(Some AdvancedDataGridColumnGroup having more nested groupings inside while others may or may not have nested groupings).My requirement is that i need to loop through to the last elements (AdvancedDataGridColumn) for each Top level AdvancedDataGridColumnGroups.How do i loop through the groupings to reach the last child.
Regards
Sidd

...I knew it wasn't that hard!
Thanks!

Similar Messages

[svn:osmf:] 14765: Put gate around autoRewind code, to prevent possibility of an infinite loop ( which could happen if you create a SerialElement with the last child a DurationElement of duration zero ).

Revision: 14765
Revision: 14765
Author:   [email protected]
Date:     2010-03-15 13:48:04 -0700 (Mon, 15 Mar 2010)
Log Message:
Put gate around autoRewind code, to prevent possibility of an infinite loop (which could happen if you create a SerialElement with the last child a DurationElement of duration zero).
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/media/MediaPlayer.as

Step by step, how did you arrive at seeing this agreement?

Loop through a csv file and return the number of rows in it?

What would be simplest way to loop through a csv file and
return the number of rows in it?
<cffile action="read" file="#filename#" output="#csvstr#"
>
<LOOP THROUGH AND COUNT ROWS>

ListLen(). Use chr(13) as your delimiter

Grey Screen in iPad Content Viewer when swipe through the last slides of the articles

Some of co-workers and clients reported and issue with the presentations and the viewer: some times grey screens appear when swiping in an presentation from article to article (reproducible only for the last slide of the article).
Pre-conditions:
1. Folio with several articles (3-4 is good).
2. Articles should have different number of slides.
Steps to reproduce:
1. Open folio on iPad and go to the last slide of each article.
2. Swipe from article to article (better from the first one article to the last one)..
Expected outcome: Last slide of the next article is displayed.
Actual outcome: Grey screen is displayed instead of the last article. Some times it's needed to swipe fast to reproduce the issue. Or at least on the last slide you'll see grey screen instead of the content.
Content will be displayed if you scroll up the page. Seems that new (additional) page is added after the last slide of an article and disappeared after scrolling the page.
Notes: Reproducible with the latest version of adobe viewer (i'm using v31(3.4.3.0.96281). NOT reproducible in iPad Content Viewer with version 3.2.1.3.85505.
Maybe somebody knows the root cause of this issue and how to fix it?

I can confirm that I've seen this happen but beyond that, I can't help.

I need to get the tagName after a node of the first child of the Root

Hi All,
I need to get the TagName of the Node immediete after the Root. I won't know what is the TagName, and based on the Tagname only I can process the records.
For example I might receive a SALES object or a MARKETING object wrapped under the root.
eg.
<PARENT>
<SALES>
</SALES>
</PARENT>
or
<PARENT>
<MARKETING>
</MARKETING>
</PARENT>
I tried to using like this
               DocumentBuilder documentBuilder = documentBuilderFactory.newDocumentBuilder();
               File file = new File("c:/example.xml");
               document = documentBuilder.parse(file);
               Node node = document.getDocumentElement().getFirstChild();
               System.out.println("node Name:" +node.getNodeName());
               System.out.println("node Value:" +node.getNodeValue());
It returns only something like #text, but I need the response like 'SALES'.
Can anyone let me know if im missing something somewhere.
thanks in advance,
Harish

That's because the first child of the document element is that whitespace text node between <PARENT> and <SALES>. You need to scan through the children of the document element until you find one that is an Element node.

External USB hard drive won't reformat, won't appear in Finder, error: Unable to write to the last block of the device message

So I just got a new MacBook Air and since I had an external USB hard drive (TOSHIBA MQ01ABD100 1TB) lying around, I decided to use it for back-up. Since I only have just the one hard drive, I decided to partition it into two - one for Time Machine backups, and one for general files (formatted FAT so I could use it with Windows). However, the partitioning failed and I ended up with a partition named disk1s2. Plus, it won't appear on Finder anymore, but it appears in Disk Utility.
I have tried to reformat it, but I always get the message "Unable to write to the last block of the device".
Here's the info about my drive:
Name: TOSHIBA MQ01ABD100 Media
Type: Disk
Partition Map Scheme: GUID Partition Table
Disk Identifier: disk1
Media Name: TOSHIBA MQ01ABD100 Media
Media Type: Generic
Connection Bus: USB
USB Serial Number: 1220069C
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Ejectable: Yes
Location: External
Total Capacity: 1 TB
Disk Number: 1
Partition Number: 0
S.M.A.R.T. Status: Not Supported
And here's for disk1s2:
Name: disk1s2
Type: Partition
Disk Identifier: disk1s2
Mount Point: Not mounted
File System: Mac OS Extended
Connection Bus: USB
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Capacity: 999.86 GB
Owners Enabled: No
Can Turn Owners Off: Yes
Can Be Formatted: Yes
Bootable: Yes
Supports Journaling: Yes
Journaled: No
Disk Number: 1
Partition Number: 2
Here's what it says when I run diskutil in Terminal:
Device Identifier:        disk1
Device Node:              /dev/disk1
Part of Whole:            disk1
Device / Media Name:      TOSHIBA MQ01ABD100 Media
Volume Name:              Not applicable (no file system)
Mounted:                  Not applicable (no file system)
File System:              None
Content (IOContent):      GUID_partition_scheme
OS Can Be Installed:      No
Media Type:               Generic
Protocol:                 USB
SMART Status:             Not Supported
Total Size:               1.0 TB (1000204884480 Bytes) (exactly 1953525165 512-Byte-Units)
Volume Free Space:        Not applicable (no file system)
Device Block Size:        512 Bytes
Read-Only Media:          No
Read-Only Volume:         Not applicable (no file system)
Ejectable:                Yes
Whole:                    Yes
Internal:                 No
OS 9 Drivers:             No
Low Level Format:         Not supported
I didn't have any data in it prior to the failed partitioning attempt, so there aren't any worries of data recovery. But I'd really like to be able to use this drive again, and save some money (external hard drives are expensive where I live). Anyone with any ideas?

I'd also like to add that repairing the disk using Disk Utility does nothing but tell me to reformat the drive. So I'm stuck in a loop here.

Batch changes don't function. Apt 3.2. From simple commands like "rotate clockwise" to "lift and stamp" the command only affects to the last image in the group selected. Similar problems? Solutions?

Batch changes don't function. From simple commands like "rotate clockwise" to "lift and stamp" the command only affects to the last image in the group selected. Similar problems? Solutions? Suggestions? Thanks, Bruce

Glad it helped. Everyone has been bitten by this at one time or another. Fortunately you only get bit once
Well if you haven't already read it two or three times the User manual is really very good. Apple really did a nice job with it. The on-line version is nice because it is searchable.
After that the Apple Pro Training Series book Aperture 3 is very useful. Its basically split into three parts. The library, adjustments and sharing. In addition if you get all the way through it you can take the Certification test and become, well certified.
Rwboyer who posts here on and off has a good site and a couple of ebooks that I found useful.
good luck

The last day of the month when the report is run

Hi,
I am working on custom outbound idocs for FICO module through INTERFACE Program the third party sytem needs <b> "The last day of the month when the report is run"</b> so is there any sytem field or standard SAP Sytem Table field which can give me that value.plz let me know ASAP.
Other wise should i develop custom logic.

Hi,
Try this way.
Selection-screen
PARAMETERS: p_bldat LIKE bsis-bldat .
INITIALIZATION.
DATA: v_end_date LIKE sy-datum.
CALL FUNCTION 'LAST_DAY_OF_MONTHS'
    EXPORTING
      day_in            = sy-datum
    IMPORTING
      last_day_of_month = v_end_date
    EXCEPTIONS
      day_in_no_date    = 1
      OTHERS            = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
p_bldat = v_end_date.
Thanks,
Anitha

How to find FIRST and the LAST date of the month.

Hello,
I want to find the first and the last date of the current month through query. How is it possible please help.
For example if the current month is july. The first date should be 01-JUL-2006 and the last date would be 31-JUL-2006.
Please help me.
Regards,
Imran Baig

Like this?
SQL> select trunc(sysdate,'MM') "First_Day",
2 last_day(sysdate) "Last_Day" from dual;
First_Day Last_Day
01-JUL-06 31-JUL-06
SQL> select trunc(to_date('10-FEB-04'),'MM' ) "First_Day",
2 last_day(to_date('10-FEB-04')) "Last_Day" from dual;
First_Day Last_Day
01-FEB-04 29-FEB-04

I am using Iphone 5. Since the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal

I am using Iphone 5. SInce the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal or the other way is to turn the device off and then turn it on. the phones also running slow and therefore at times becomes very cumbersome. a few of my friends have also been having the same problems.
I have taken the phone to the service outles but the best they did was to reboot the phone it works fine for a day or two but again the same issue.
Can anyone share any info on it?

I'm glad to hear that they replaced your phone. Any experience I have had with Apple customer service and/or Genius bar has been extremely positive. While I have had positive outcomes from trouble with other phones in the past, they are not as quick and friendly. I had a Motorola phone and a Samsung phone go bad several years ago and warranty work through AT&T required that I wait for a replacement unit and then mail back the original unit to keep from being charged for the device. This usually meant almost a week without a phone. Nice to walk into Apple and walk out with a replacement device. Enjoy your phone.

HT203167 Hi, I recently bought a book (Jeffrey Toobin, The Oath), and the last page of the first two chapters, at least, are missing. Could you advise?

Hi, I recently bought a book (Jeffrey Toobin, The Oath) through iBook on my iPhone, and the last page of the first two chapters, at least, are missing. Could you advise?

Nothing no one here can do. Call the place where you purchased the book from or contact the book author!

END-OF-PAGE not displayed in the last page of the classical report.

Hi all..
The END-OF-PAGE is not displayed in the last page of the classical report.
SY-LINCT value is 30.
Lines displayed in the report per page is 24.
[3 for TOP-OF-PAGE and 3 for END-OF-PAGE]
My Internal table has 6942 records.
It comes 289 pages with 24 records in a page and 290 th page with 6 records.
The END-OF-PAGE is not coming for the 290 th page.
Please help.
Thank You.
Karthi M R.

There are multiple links in SDN on this subject; Please search,
end-of-page

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

Trying to install/format an INTERNAL hard drive using Disk Utility gives me "Error: -69760: Unable to write to the last block of the device". Is that a hardware problem and what could be done about it?

*** PLEASE NOTE*** - This is a query about an INTERNAL HDD not an external one. Thanks.
My Mac is a late 2009 model and the current hard drive recently failed. So I bought a new one, exactly the same, albeit 750gb instead of 500gb. The HDD is a Seagate Momentus 7200. Before the my current drive failed I made a time machine back up to an external USB HDD. I've inserted the HDD into the bottom of my Mac, plugged in the USB and started my machine pressing the 'Option' ([ALT]) key. I go into Disk Utility to try and format the new HDD by creating a new partition but I keep getting the messages,
"Error: -69760: Unable to write to the last block of the device"
or
"POSIX: could not allocate memory"
This is actaully the third HDD I've tried. The first was another Seagate Momentus 7200 500gb, but this time it was a newer model (model number ended in 423AS instead of 420AS - the new one I am trying ends with 420AS, which is the same as the current HDD). I then tried a Western Digital drive but that one didn't even show up in DU. Forums and tech support are suggesting it's faults with the HDDs but surely not three in a row?
Could this be an issue with another part of my Mac?
Is there anything else I can do to format the HDD, have I missed a crucial step?

Did you ever get a resolution to this issue?
I am having that exact error with a new 512GB SSD from Crucial, in a 15" MBP mid-2010.
I really wonder now if the stupid SATA cable could be bad - causing the initial SSD fail. I am replacing it with the EXACT same drive, and getting that "last block" error when i partition in the GUI or from command-line.
thanks!

I found how to delete a series from my ipad, but it still won't download the last episode of the new series I am trying to have. What have I done wrong?

I found how to delete a series from my ipad, but it still won't download the last episode of the new series I am trying to have. What have I done wrong?

What is the GarageBand version that your friend is using?
If it is GarageBand '11, version 6.0.5, you can buy GarageBand '11 as a boxed retail version with the iLIfe '11 bundle, e.g. from Amazon.
Then you can upgrade GarageBand '11 to 6.0.5, using this upgrader from the Support page:
GarageBand 6.0.5
GarageBand 6.0.5 will work well with your system. But if your friend is using the newest GarageBand 10, this will not help. Then ask your friend to send you audio files for each track, so you can recreate the project from the audio. Or your friend could also use GarageBand '11 for the projects you want to share, that will run well in all newer MacOS X versions, even with GarageBand 10.0 installed on the same system.
-- Leonie

Looping through to the last child in the ADG groupedColumn

Similar Messages

Maybe you are looking for