Losing Applications Window after machine crash

Hi,
I'm running 10.1.3.3.0 and my machine has a memory problem that causes a blue screen every so often. Sometimes when this happens and I have JDev up, I lose my Navigators and I can't get them back. I also can't to a file|new either. In short JDev is hosed. Is there any way of getting back to where I was without reinstalling JDev? This is very annoying.
Also, if I do a "view|Application navigator" I get a popup titled "Message" with the message "Command not handled."
Thanks,
Joe
Message was edited by:
Joe the Jet

If you have defective memory problems you may very well be getting corrupted files on your disk due to the memory errors messing up data before it's written. I'd recommend you run something like MemTest and get the memory problems fixed ASAP (before doing ANYTHING else). As a short term "fix" you might try slowing down your memory timing in your BIOS to hold you over until you can buy new memory.
Since JDeveloper doesn't really do an "install" it should be very painless to just make a new copy and use the new copy instead of the corrupted one (just don't migrate your settings).

Similar Messages

  • OS 10.6.4 losing application window focus across a bunch of apps

    Hi
    My iMac (10.6.4) has started doing something odd - it loses the application window focus in a range of different applications:
    The application stays in focus, but the current window loses focus. (You can see in the 'Window' menu for that app when it's done it that no window has focus). It happens when you're typing OR when you're doing nothing.
    It's affected at least Safari and iTunes, and i think, Entourage.
    There are no unusual apps running that I'm aware of: at least from the 'Force Quit' menu.
    Any ideas?
    (I'm using wired keyboard and mouse, and have switched USB ports for each, just to test if that was the prob)

    Bob: as you may have seen on the original post I did install the updates.
    That got the programs starting again, but trying to be productive is doing nothing but cause more crashes. I haven't seen something this bad and annoying in years. 
    I tried to simply copy a graphic in AI and place it as a Smart Object into a Photoshop layer. AI immediately crashed and PS froze. Had to do a force quit on PS. 
    Next I tried to do a save as with an AI file and it crashed the program. I'm totally crippled and very frustrated--as is my client needing the work done. 
    Simply put--why are Adobe CS programs crashing? The patch didn't solve the problem and I'm seeing a rash of discussions about crashes. What's the solution? What's the best way to get a real-world Adobe person to help me? 
    Geez what a mess.

  • How do I stop Firefox from opening old tabs/windows after a crash?

    whenever it crashes and i try to reopen the program, it opens all my old tabs and windows. often these are videos which all start playing at once. or worse, it opens the page that made it crash in the first place and crashes again.
    how do i stop this annoying feature?
    if there's no way to stop it, can you recommend a simple browser that doesn't try to think for you?

    hello, enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''browser.sessionstore.resume_from_crash'''. double-click it and change its value to '''false'''.

  • How can I re-open the restore pane that had my saved open windows after a crash? these are not in the history section

    After a "unexpected closure", firefox saves the windows you are using.
    This window did not re-open after an update/re-start (usually, all open firefox windows open after any restart).
    My question is, how can I get this window open again? The visits are not in the history section. I have many, many windows that were marking work, so I need to have that list.

    '''aj34977:''' While it is nice of you to make this comment, you might want to read my first post again. The answer you suggest is actually mentioned there, in my list of things that did not fix the problem.
    This is not to diminish the fact that this worked for you (and no doubt many others) but there are already several posts about that particular solution and -- as stated -- this was about what to do when that (and several other proposed fixes) did not work.

  • Can I prevent Firefox from attempting to restore all windows after a crash (even though I have set it to start with a blank page)?

    Given that some of the open windows are probably what made it crash in the first instance, this is very annoying. Sometimes it gives me an error message apologising for not being able to load the pages, but often it just tries again.

    You can do this by changing a hidden preference.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning that appears, this will then bring up a list of preferences
    # Type '''crash''' into the filter box
    # Double-click on the preference browser.sessionstore.resume_from_crash to change its value to '''false'''

  • ITunes 11.1 on Windows 8 machine crashes when try to connect to the store.

    I've tried to repair iTunes and also uninstalled/reinstalled it, restarted my computer - all without any success. I can get onto the store via my iPhone, just not my computer. Any ideas?

    Correction: iTunes 11.1.0.126, not 11.0.1.126

  • CS6 Applications crash at launch on new Windows 8 Machine

    I've installed the entire CS6 Creative Suite on a new Windows 8 Machine. Launcing any of the applications other than Acrobat 10 causes a crash. Windows 8 and the Nvidia GTX670 are all up to date. Crash reports for Photshop and Illustrator are as follows:
    Version=1
    EventType=APPCRASH
    EventTime=130049840096886225
    ReportType=2
    Consent=1
    UploadTime=130049840098761275
    ReportIdentifier=37a6f1e2-7397-11e2-bea3-9cb70dad8ba7
    IntegratorReportIdentifier=37a6f1e1-7397-11e2-bea3-9cb70dad8ba7
    NsAppName=Photoshop.exe
    Response.BucketId=23ed3b6a404a94083e867a3519a4b84e
    Response.BucketTable=4
    Response.LegacyBucketId=94924264
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=Photoshop.exe
    Sig[1].Name=Application Version
    Sig[1].Value=13.0.0.0
    Sig[2].Name=Application Timestamp
    Sig[2].Value=4f61c045
    Sig[3].Name=Fault Module Name
    Sig[3].Value=KERNELBASE.dll
    Sig[4].Name=Fault Module Version
    Sig[4].Value=6.2.9200.16451
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=50988aa6
    Sig[6].Name=Exception Code
    Sig[6].Value=c0000005
    Sig[7].Name=Exception Offset
    Sig[7].Value=000000000006cf8c
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.2.9200.2.0.0.256.103
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=4105
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=704a
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=704af58b20ab3754b09b758594d02969
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=b8e1
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=b8e1a366e335c0770c4c14e5a5fd106b
    UI[2]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    UI[3]=Adobe Photoshop CS6 has stopped working
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=Check online for a solution and close the program
    UI[6]=Check online for a solution later and close the program
    UI[7]=Close the program
    LoadedModule[0]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
    LoadedModule[2]=C:\Windows\system32\KERNEL32.DLL
    LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\system32\apphelp.dll
    LoadedModule[5]=C:\Windows\AppPatch\AppPatch64\AcLayers.DLL
    LoadedModule[6]=C:\Windows\system32\msvcrt.dll
    LoadedModule[7]=C:\Windows\system32\USER32.dll
    LoadedModule[8]=C:\Windows\system32\SHLWAPI.dll
    LoadedModule[9]=C:\Windows\SYSTEM32\sfc.dll
    LoadedModule[10]=C:\Windows\SYSTEM32\WINSPOOL.DRV
    LoadedModule[11]=C:\Windows\system32\GDI32.dll
    LoadedModule[12]=C:\Windows\SYSTEM32\sfc_os.DLL
    LoadedModule[13]=C:\Windows\SYSTEM32\SortWindows61.dll
    LoadedModule[14]=C:\Windows\system32\IMM32.DLL
    LoadedModule[15]=C:\Windows\system32\MSCTF.dll
    LoadedModule[16]=C:\Windows\system32\appinit_dll.dll
    LoadedModule[17]=C:\Windows\system32\ADVAPI32.dll
    LoadedModule[18]=C:\Windows\SYSTEM32\sechost.dll
    LoadedModule[19]=C:\Windows\system32\RPCRT4.dll
    LoadedModule[20]=C:\Windows\WinSxS\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.92 00.16384_none_72771d4ecc1c3a4d\gdiplus.dll
    LoadedModule[21]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\ExtendScript.dll
    LoadedModule[22]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\ScCore.dll
    LoadedModule[23]=C:\Windows\SYSTEM32\mscms.dll
    LoadedModule[24]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\MSVCP100.dll
    LoadedModule[25]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\MSVCR100.dll
    LoadedModule[26]=C:\Windows\SYSTEM32\OPENGL32.dll
    LoadedModule[27]=C:\Windows\system32\WS2_32.dll
    LoadedModule[28]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\cg.dll
    LoadedModule[29]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\cgGL.dll
    LoadedModule[30]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\adbeape.dll
    LoadedModule[31]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\AdobeOwl.dll
    LoadedModule[32]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\ahclient.dll
    LoadedModule[33]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\amtlib.dll
    LoadedModule[34]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\AXEDOMCore.dll
    LoadedModule[35]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\MPS.dll
    LoadedModule[36]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\PlugPlug.dll
    LoadedModule[37]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\tbb.dll
    LoadedModule[38]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\AdobeLinguistic.dll
    LoadedModule[39]=C:\Windows\SYSTEM32\combase.dll
    LoadedModule[40]=C:\Windows\system32\SHELL32.dll
    LoadedModule[41]=C:\Windows\system32\ole32.dll
    LoadedModule[42]=C:\Windows\SYSTEM32\USERENV.dll
    LoadedModule[43]=C:\Windows\SYSTEM32\GLU32.dll
    LoadedModule[44]=C:\Windows\SYSTEM32\DDRAW.dll
    LoadedModule[45]=C:\Windows\system32\NSI.dll
    LoadedModule[46]=C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.687 1_none_08e717a5a83adddf\MSVCR90.dll
    LoadedModule[47]=C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.687 1_none_08e717a5a83adddf\MSVCP90.dll
    LoadedModule[48]=C:\Windows\system32\WININET.dll
    LoadedModule[49]=C:\Windows\system32\OLEAUT32.dll
    LoadedModule[50]=C:\Windows\SYSTEM32\WINHTTP.dll
    LoadedModule[51]=C:\Windows\system32\SETUPAPI.dll
    LoadedModule[52]=C:\Windows\SYSTEM32\IPHLPAPI.DLL
    LoadedModule[53]=C:\Windows\system32\PSAPI.DLL
    LoadedModule[54]=C:\Windows\SYSTEM32\profapi.dll
    LoadedModule[55]=C:\Windows\SYSTEM32\DCIMAN32.dll
    LoadedModule[56]=C:\Windows\system32\iertutil.dll
    LoadedModule[57]=C:\Windows\system32\CFGMGR32.dll
    LoadedModule[58]=C:\Windows\system32\DEVOBJ.dll
    LoadedModule[59]=C:\Windows\SYSTEM32\WINNSI.DLL
    LoadedModule[60]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\tbbmalloc.dll
    LoadedModule[61]=C:\Windows\SYSTEM32\SHCORE.dll
    LoadedModule[62]=C:\Windows\SYSTEM32\CRYPTBASE.dll
    LoadedModule[63]=C:\Windows\SYSTEM32\bcryptPrimitives.dll
    LoadedModule[64]=C:\Windows\system32\uxtheme.dll
    LoadedModule[65]=C:\Windows\SYSTEM32\VERSION.dll
    LoadedModule[66]=C:\Windows\SYSTEM32\PROPSYS.dll
    LoadedModule[67]=C:\Windows\SYSTEM32\dnssd.dll
    LoadedModule[68]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1d f_6.0.9200.16384_none_418c2a697189c07f\Comctl32.dll
    LoadedModule[69]=C:\Windows\SYSTEM32\STI.DLL
    LoadedModule[70]=C:\Windows\SYSTEM32\clbcatq.dll
    LoadedModule[71]=C:\Windows\SYSTEM32\CRYPTSP.dll
    LoadedModule[72]=C:\Windows\system32\rsaenh.dll
    LoadedModule[73]=C:\Windows\SYSTEM32\wiatrace.dll
    LoadedModule[74]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.dll
    LoadedModule[75]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\PSViews.dll
    LoadedModule[76]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\PSArt.dll
    LoadedModule[77]=C:\Windows\SYSTEM32\dwmapi.dll
    LoadedModule[78]=C:\Windows\SYSTEM32\DWrite.dll
    LoadedModule[79]=C:\Windows\system32\c_g18030.dll
    LoadedModule[80]=C:\Windows\SYSTEM32\MSIMG32.dll
    LoadedModule[81]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\LogSession.dll
    LoadedModule[82]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\Plug-Ins\Extensions\FastCore.8BX
    LoadedModule[83]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\Plug-Ins\Extensions\MMXCore.8BX
    LoadedModule[84]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\libmmd.dll
    LoadedModule[85]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\Plug-Ins\Extensions\MultiProcessor Support.8BX
    LoadedModule[86]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\PLUGIN.dll
    LoadedModule[87]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\Plug-Ins\ADM\ADMPlugin.apl
    LoadedModule[88]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\AdobeXMP.dll
    LoadedModule[89]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\Plug-Ins\File Formats\Dicom.8BI
    LoadedModule[90]=C:\Windows\SYSTEM32\WSOCK32.dll
    LoadedModule[91]=C:\Windows\SYSTEM32\NETAPI32.dll
    LoadedModule[92]=C:\Windows\SYSTEM32\netutils.dll
    LoadedModule[93]=C:\Windows\SYSTEM32\srvcli.dll
    LoadedModule[94]=C:\Windows\SYSTEM32\wkscli.dll
    LoadedModule[95]=C:\Program Files\Common Files\Adobe\Plug-Ins\CS6\File Formats\Camera Raw.8bi
    LoadedModule[96]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\aif_core.dll
    LoadedModule[97]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\aif_ogl.dll
    LoadedModule[98]=C:\Windows\SYSTEM32\nvoglv64.DLL
    LoadedModule[99]=C:\Windows\system32\WINTRUST.dll
    LoadedModule[100]=C:\Windows\system32\CRYPT32.dll
    LoadedModule[101]=C:\Windows\system32\MSASN1.dll
    LoadedModule[102]=C:\Windows\SYSTEM32\ntmarta.dll
    LoadedModule[103]=C:\Windows\SYSTEM32\powrprof.dll
    LoadedModule[104]=C:\Windows\SYSTEM32\dxgi.dll
    LoadedModule[105]=C:\Windows\SYSTEM32\d3d11.dll
    LoadedModule[106]=C:\Windows\SYSTEM32\DXGIDebug.dll
    LoadedModule[107]=C:\Windows\SYSTEM32\nvwgf2umx.dll
    LoadedModule[108]=C:\Windows\system32\wbem\wbemprox.dll
    LoadedModule[109]=C:\Windows\SYSTEM32\wbemcomn.dll
    LoadedModule[110]=C:\Windows\system32\wbem\wbemsvc.dll
    LoadedModule[111]=C:\Windows\system32\wbem\fastprox.dll
    LoadedModule[112]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\BIB.dll
    LoadedModule[113]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\BIBUtils.dll
    LoadedModule[114]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\ACE.dll
    LoadedModule[115]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\AGM.dll
    LoadedModule[116]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\CoolType.dll
    LoadedModule[117]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\AXE8SharedExpat.dll
    LoadedModule[118]=C:\Windows\SYSTEM32\icm32.dll
    LoadedModule[119]=C:\Windows\System32\msxml6.dll
    LoadedModule[120]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\Plug-Ins\Extensions\ScriptingSupport.8li
    LoadedModule[121]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\ScriptUIFlex.dll
    LoadedModule[122]=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\adobe_caps.dll
    LoadedModule[123]=C:\Windows\SYSTEM32\WindowsCodecs.dll
    LoadedModule[124]=C:\Windows\SYSTEM32\WTSAPI32.dll
    LoadedModule[125]=C:\Windows\SYSTEM32\WINSTA.dll
    LoadedModule[126]=C:\Program Files\Common Files\Adobe\APE\3.3\adbeapecore.dll
    LoadedModule[127]=C:\Windows\SYSTEM32\sxs.dll
    LoadedModule[128]=C:\Program Files\Common Files\Adobe\APE\3.3\adbeapeengine.dll
    LoadedModule[129]=C:\Windows\SYSTEM32\OLEACC.dll
    LoadedModule[130]=C:\Windows\system32\COMDLG32.dll
    LoadedModule[131]=C:\Windows\SYSTEM32\WINMM.dll
    LoadedModule[132]=C:\Windows\SYSTEM32\msi.dll
    LoadedModule[133]=C:\Windows\system32\urlmon.dll
    LoadedModule[134]=C:\Windows\SYSTEM32\DSOUND.dll
    LoadedModule[135]=C:\Windows\SYSTEM32\DNSAPI.dll
    LoadedModule[136]=C:\Windows\SYSTEM32\WINMMBASE.dll
    LoadedModule[137]=C:\Windows\SYSTEM32\dbghelp.dll
    LoadedModule[138]=C:\Windows\system32\mlang.dll
    LoadedModule[139]=C:\Windows\SYSTEM32\Secur32.dll
    LoadedModule[140]=C:\Windows\SYSTEM32\SSPICLI.DLL
    LoadedModule[141]=C:\Windows\system32\schannel.DLL
    LoadedModule[142]=C:\Windows\SYSTEM32\MMDevAPI.DLL
    LoadedModule[143]=C:\Windows\SYSTEM32\wdmaud.drv
    LoadedModule[144]=C:\Windows\SYSTEM32\ksuser.dll
    LoadedModule[145]=C:\Windows\SYSTEM32\AVRT.dll
    LoadedModule[146]=C:\Windows\SYSTEM32\AUDIOSES.DLL
    LoadedModule[147]=C:\Windows\SYSTEM32\msacm32.drv
    LoadedModule[148]=C:\Windows\SYSTEM32\MSACM32.dll
    LoadedModule[149]=C:\Windows\SYSTEM32\midimap.dll
    LoadedModule[150]=C:\Windows\system32\mswsock.dll
    LoadedModule[151]=C:\Program Files (x86)\Common Files\Adobe\CS6ServiceManager\lib\ServiceManager-Launcher_x64.dll
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    FriendlyEventName=Stopped working
    ConsentKey=APPCRASH
    AppName=Adobe Photoshop CS6
    AppPath=C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    NsPartner=windows
    NsGroup=windows8
    Version=1
    EventType=APPCRASH
    EventTime=130049318541040487
    ReportType=2
    Consent=1
    UploadTime=130049318542402054
    ReportIdentifier=c88ebf2f-731d-11e2-bea2-9cb70dad8ba7
    IntegratorReportIdentifier=c88ebf2e-731d-11e2-bea2-9cb70dad8ba7
    WOW64=1
    NsAppName=Illustrator.exe
    Response.BucketId=59e0704e4e7d5717a172d9ad21c6e12e
    Response.BucketTable=1
    Response.LegacyBucketId=-889454903
    Response.type=4
    Response.CabId=-804723362
    Sig[0].Name=Application Name
    Sig[0].Value=Illustrator.exe
    Sig[1].Name=Application Version
    Sig[1].Value=16.0.0.682
    Sig[2].Name=Application Timestamp
    Sig[2].Value=4f6e762b
    Sig[3].Name=Fault Module Name
    Sig[3].Value=KERNELBASE.dll
    Sig[4].Name=Fault Module Version
    Sig[4].Value=6.2.9200.16451
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=50988950
    Sig[6].Name=Exception Code
    Sig[6].Value=c0000005
    Sig[7].Name=Exception Offset
    Sig[7].Value=00054764
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.2.9200.2.0.0.256.103
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=4105
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=5861
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=5861822e1919d7c014bbb064c64908b2
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=f3d5
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=f3d5be0cad2787556264647dc02181c3
    UI[2]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\Illustrator.exe
    UI[3]=Adobe Illustrator CS6 has stopped working
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=Check online for a solution and close the program
    UI[6]=Check online for a solution later and close the program
    UI[7]=Close the program
    LoadedModule[0]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\Illustrator.exe
    LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
    LoadedModule[2]=C:\Windows\SYSTEM32\KERNEL32.DLL
    LoadedModule[3]=C:\Windows\SYSTEM32\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\system32\apphelp.dll
    LoadedModule[5]=C:\Windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.9200. 16384_none_ba245425e0986353\gdiplus.dll
    LoadedModule[6]=C:\Windows\SYSTEM32\IMM32.dll
    LoadedModule[7]=C:\Windows\SYSTEM32\VERSION.dll
    LoadedModule[8]=C:\Windows\SYSTEM32\Secur32.dll
    LoadedModule[9]=C:\Windows\SYSTEM32\SHLWAPI.dll
    LoadedModule[10]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\LogSession.dll
    LoadedModule[11]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\BIB.dll
    LoadedModule[12]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\BIBUtils.dll
    LoadedModule[13]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AGM.dll
    LoadedModule[14]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\CoolType.dll
    LoadedModule[15]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\MPS.dll
    LoadedModule[16]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\ACE.dll
    LoadedModule[17]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AdobeXMP.dll
    LoadedModule[18]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AdobeXMPFiles.dll
    LoadedModule[19]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AXEDOMCore.dll
    LoadedModule[20]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\SPBasic.dll
    LoadedModule[21]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\ARE.dll
    LoadedModule[22]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\WRServices.dll
    LoadedModule[23]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AdobeLinguistic.dll
    LoadedModule[24]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\icuin40.dll
    LoadedModule[25]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\icuuc40.dll
    LoadedModule[26]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\dvacore.dll
    LoadedModule[27]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\dvaui.dll
    LoadedModule[28]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\dvaai.dll
    LoadedModule[29]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\dvaworkspace.dll
    LoadedModule[30]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\exo.dll
    LoadedModule[31]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AdobeSplashKit.dll
    LoadedModule[32]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\amtlib.dll
    LoadedModule[33]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AXE8SharedExpat.dll
    LoadedModule[34]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\ahclient.dll
    LoadedModule[35]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\Alcid.dll
    LoadedModule[36]=C:\Windows\SYSTEM32\USER32.dll
    LoadedModule[37]=C:\Windows\SYSTEM32\GDI32.dll
    LoadedModule[38]=C:\Windows\SYSTEM32\COMDLG32.dll
    LoadedModule[39]=C:\Windows\SYSTEM32\ADVAPI32.dll
    LoadedModule[40]=C:\Windows\SYSTEM32\SHELL32.dll
    LoadedModule[41]=C:\Windows\SYSTEM32\ole32.dll
    LoadedModule[42]=C:\Windows\SYSTEM32\MSVCP100.dll
    LoadedModule[43]=C:\Windows\SYSTEM32\MSVCR100.dll
    LoadedModule[44]=C:\Windows\SYSTEM32\MPR.dll
    LoadedModule[45]=C:\Windows\SYSTEM32\msvcrt.dll
    LoadedModule[46]=C:\Windows\SYSTEM32\combase.dll
    LoadedModule[47]=C:\Windows\SYSTEM32\MSCTF.dll
    LoadedModule[48]=C:\Windows\SYSTEM32\SETUPAPI.dll
    LoadedModule[49]=C:\Windows\SYSTEM32\PSAPI.DLL
    LoadedModule[50]=C:\Windows\SYSTEM32\OLEAUT32.dll
    LoadedModule[51]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\icudt40.dll
    LoadedModule[52]=C:\Windows\SYSTEM32\RPCRT4.dll
    LoadedModule[53]=C:\Windows\SYSTEM32\dbghelp.dll
    LoadedModule[54]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\boost_date_time.dll
    LoadedModule[55]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\boost_threads.dll
    LoadedModule[56]=C:\Windows\SYSTEM32\OPENGL32.dll
    LoadedModule[57]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\boost_signals.dll
    LoadedModule[58]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\boost_system.dll
    LoadedModule[59]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\dvaadameve.dll
    LoadedModule[60]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AdobeOwl.dll
    LoadedModule[61]=C:\Windows\SYSTEM32\MSIMG32.dll
    LoadedModule[62]=C:\Windows\SYSTEM32\WINHTTP.dll
    LoadedModule[63]=C:\Windows\SYSTEM32\IPHLPAPI.DLL
    LoadedModule[64]=C:\Windows\SYSTEM32\WININET.dll
    LoadedModule[65]=C:\Windows\SYSTEM32\WS2_32.dll
    LoadedModule[66]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_ 6.0.9200.16384_none_893961408605e985\COMCTL32.dll
    LoadedModule[67]=C:\Windows\SYSTEM32\sechost.dll
    LoadedModule[68]=C:\Windows\SYSTEM32\CFGMGR32.dll
    LoadedModule[69]=C:\Windows\SYSTEM32\DEVOBJ.dll
    LoadedModule[70]=C:\Windows\SYSTEM32\SspiCli.dll
    LoadedModule[71]=C:\Windows\SYSTEM32\GLU32.dll
    LoadedModule[72]=C:\Windows\SYSTEM32\DDRAW.dll
    LoadedModule[73]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\boost_filesystem.dll
    LoadedModule[74]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\boost_regex.dll
    LoadedModule[75]=C:\Windows\SYSTEM32\NSI.dll
    LoadedModule[76]=C:\Windows\SYSTEM32\WINNSI.DLL
    LoadedModule[77]=C:\Windows\SYSTEM32\iertutil.dll
    LoadedModule[78]=C:\Windows\SYSTEM32\CRYPTBASE.dll
    LoadedModule[79]=C:\Windows\SYSTEM32\DCIMAN32.dll
    LoadedModule[80]=C:\Windows\SYSTEM32\SHCORE.DLL
    LoadedModule[81]=C:\Windows\SYSTEM32\bcryptPrimitives.dll
    LoadedModule[82]=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\System\AIRes.dll
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    File[0].CabName=WERInternalMetadata.xml
    File[0].Path=WERE5C2.tmp.WERInternalMetadata.xml
    File[0].Flags=851971
    File[0].Type=5
    File[0].Original.Path=d:\Users\Doug\AppData\Local\Temp\WERE5C2.tmp.WERInternalMetadata.xml
    File[1].CabName=AppCompat.txt
    File[1].Path=WERE769.tmp.appcompat.txt
    File[1].Flags=17629187
    File[1].Type=5
    File[1].Original.Path=d:\Users\Doug\AppData\Local\Temp\WERE769.tmp.appcompat.txt
    File[2].CabName=minidump.mdmp
    File[2].Path=WERE7F7.tmp.mdmp
    File[2].Flags=2949123
    File[2].Type=2
    File[2].Original.Path=d:\Users\Doug\AppData\Local\Temp\WERE7F7.tmp.mdmp
    File[3].CabName=Report.cab
    File[3].Path=Report.cab
    File[3].Flags=196608
    File[3].Type=9
    File[3].Original.Path=Report.cab
    FriendlyEventName=Stopped working
    ConsentKey=APPCRASH
    AppName=Adobe Illustrator CS6
    AppPath=C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\Illustrator.exe
    NsPartner=windows
    NsGroup=windows8

    First, you're using 13.0.0 and haven't installed updates.
    Second, you're crashing in an OS DLL.
    My guess would be a corrupt OS install (due to disk damage or malware).

  • Having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we did

    having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

    Hey robr72339266,
    With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
    But, you cannot use Acrobat on both the machines simultaneously.
    You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
    Please Contact | Adobe to seek help on the same.
    Regards,
    Anubha

  • Deployment of JavaFX Web application on client machine(Windows OS.)

    Problem Statement:
    Deployment of JavaFX Web application on client machine(Windows OS.)
    Error: unable to load the native libarary(JNI Windows dll) i.e. throws java.lang.UnsatisfiedLinkError exception.
    Problem Description:
    I have create the JavaFX application which have dependency on Native library written in Java Native Interface(JNI).
    When the application is deployed on Apache 6.0 Tomcat Server(Copied .html file *.jnlp file and .jar file) and when client machine hit the html page in internet explorer version 8.0 its throws the following error(java.lang.UnsatisfiedLinkError: no JNIHelloWorld in java.library.path)
    Note:
    I have created the jar file which have my "JNIHelloWorld' native library dll in root directory. I have signed the jar with same signature which i have used for signing for my application Jar file.
    I have mentioned the native library jar in JNLP file resource keyword as follows:
    <resources os=Windows>
    <nativelib href="JNIHelloWorld.jar" download="eager" />
    </resources>
    The complete jnlp file content is in "JavaFXApplication.jnlp file:" section below.
    The description of error is as follows:
    Match: beginTraversal
    Match: digest selected JREDesc: JREDesc[version 1.6+, heap=-1--1, args=null, href=http://java.sun.com/products/autodl/j2se, sel=false, null, null], JREInfo: JREInfo for index 0:
    platform is: 1.7
    product is: 1.7.0_07
    location is: http://java.sun.com/products/autodl/j2se
    path is: C:\Program Files\Java\jre7\bin\javaw.exe
    args is: null
    native platform is: Windows, x86 [ x86, 32bit ]
    JavaFX runtime is: JavaFX 2.2.1 found at C:\Program Files\Java\jre7\
    enabled is: true
    registered is: true
    system is: true
         Match: ignoring maxHeap: -1
         Match: ignoring InitHeap: -1
         Match: digesting vmargs: null
         Match: digested vmargs: [JVMParameters: isSecure: true, args: ]
         Match: JVM args after accumulation: [JVMParameters: isSecure: true, args: ]
         Match: digest LaunchDesc: http://10.187.143.68:8282/KPIT/JavaFXApplication20.jnlp
         Match: digest properties: []
         Match: JVM args: [JVMParameters: isSecure: true, args: ]
         Match: endTraversal ..
         Match: JVM args final:
         Match: Running JREInfo Version match: 1.7.0.07 == 1.7.0.07
         *Match: Running JVM args match: have:<> satisfy want:<>*
    *java.lang.UnsatisfiedLinkError: no JNIHelloWorld in java.library.path*
    *     at java.lang.ClassLoader.loadLibrary(Unknown Source)*
    *     at java.lang.Runtime.loadLibrary0(Unknown Source)*
    *     at java.lang.System.loadLibrary(Unknown Source)*     at javafxapplication20.JavaFXApplication20.<clinit>(JavaFXApplication20.java:41)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at java.lang.Class.newInstance0(Unknown Source)
         at java.lang.Class.newInstance(Unknown Source)
         at com.sun.javafx.applet.FXApplet2.init(FXApplet2.java:63)
         at com.sun.deploy.uitoolkit.impl.fx.FXApplet2Adapter.init(FXApplet2Adapter.java:207)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Java Plug-in 10.7.2.11
    Using JRE version 1.7.0_07-b11 Java HotSpot(TM) Client VM
    User home directory = C:\Users\io839
    Please find my native library code and JavaFX application code:
    Native library JNI Code:
    JavaFXApplication.java:
    JNIEXPORT jstring JNICALL Java_javafxapplication_SampleController_printString(JNIEnv *env, jobject envObject)
         string str = "hello JNI";
         jstring jniStr = env->NewStringUTF(str.c_str());
         return jniStr;
    JavaFX Application code:
    JavaFXApplication.java:
    package javafxapplication;
    import javafx.application.Application;
    import javafx.fxml.FXMLLoader;
    import javafx.scene.Parent;
    import javafx.scene.Scene;
    import javafx.stage.Stage;
    public class JavaFXApplication extends Application {
    @Override
    public void start(Stage stage) throws Exception {
    Parent root = FXMLLoader.load(getClass().getResource("Sample.fxml"));
    Scene scene = new Scene(root);
    stage.setScene(scene);
    stage.show();
    * The main() method is ignored in correctly deployed JavaFX application.
    * main() serves only as fallback in case the application can not be
    * launched through deployment artifacts, e.g., in IDEs with limited FX
    * support. NetBeans ignores main().
    * @param args the command line arguments
    public static void main(String[] args) {
    launch(args);
    static{
    System.loadLibrary("JNIHelloWorld");
    SampleController.java file:
    package javafxapplication;
    import java.net.URL;
    import java.util.ResourceBundle;
    import javafx.event.ActionEvent;
    import javafx.fxml.FXML;
    import javafx.fxml.Initializable;
    import javafx.scene.control.Label;
    public class SampleController implements Initializable {
    @FXML
    private Label label;
    private native String printString();
    @FXML
    private void handleButtonAction(ActionEvent event) {
    System.out.println("You clicked me!");
    String str = printString();
    label.setText(str);
    @Override
    public void initialize(URL url, ResourceBundle rb) {
    // TODO
    //String str = printString();
    JavaFXApplication.jnlp file:
    <?xml version="1.0" encoding="utf-8"?>
    <jnlp spec="1.0" xmlns:jfx="http://javafx.com" href="JavaFXApplication.jnlp">
    <information>
    <title>JavaFXApplication20</title>
    <vendor>io839</vendor>
    <description>Sample JavaFX 2.0 application.</description>
    <offline-allowed/>
    </information>
    <resources>
    <jfx:javafx-runtime version="2.2+" href="http://javadl.sun.com/webapps/download/GetFile/javafx-latest/windows-i586/javafx2.jnlp"/>
    </resources>
    <resources>
    <j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se"/>
    <jar href="JavaFXApplication.jar" size="20918" download="eager" />
    </resources>
    <resources os=Windows>
    <nativelib href="JNIHelloWorld.jar" download="eager" />
    </resources>
    <security>
    <all-permissions/>
    </security>
    <applet-desc width="800" height="600" main-class="com.javafx.main.NoJavaFXFallback" name="JavaFXApplication" >
    <param name="requiredFXVersion" value="2.2+"/>
    </applet-desc>
    <jfx:javafx-desc width="800" height="600" main-class="javafxapplication.JavaFXApplication" name="JavaFXApplication" />
    <update check="always"/>
    </jnlp>

    No problem.
    Make sure your resources are set at the proper location. Could be that tje jni.jar is under a 'lib' folder?
    Normally you don't have to worry about deployment a lot if you are using like Netbeans 7.2 or higher.
    When you press 'Clean and build' it creates your deployed files in the 'dist' folder.
    You can change specification by adapting the build.xml file.
    Of course lot of different possibilities are available for deployment!
    You can find lot of info here:
    [http://docs.oracle.com/javafx/2/deployment/jfxpub-deployment.htm|http://docs.oracle.com/javafx/2/deployment/jfxpub-deployment.htm]
    Important to know is if you want to work with
    - a standalone application (self-contained or not)
    - with webstart
    - or with applets
    (In my case I'm using webstart, but also Self-Contained Application Packaging (jre is also installed!)

  • Firefox won't open PDF files after I removed older version of PDF-xChange Viewer and installed the lastest version of PDF-xChange Viewer. MS Explorer which I am now force to use works OK. I have checked the Applications window in Tools/Options and it l

    Firefox no longer opens PDF files. Explorer works OK. I have checked the Applications window in the Tools/Options and it says I am using PDF-xChange viewer....It just does not do anything. I get the message in the Download Error window which says...."could not be saved, because you cannot change the contents of that folder. Is the same error which I get when I attempt to open a PDF file on a webpage using the Firefox browser....Explorer works OK so I am now forced to Explorer to read PDF files via a browser.
    == This happened ==
    Every time Firefox opened
    == After removing a old copy of PDF-xChange Viewer and updating to the last version

    The error message suggests that the file (pdf) that you're trying to download cannot be saved in the folder Firefox tries to save it in.
    This can be due to several things - it could be a non-existing folder (could be a problem with the updated application), the hard drive could be too full to store the file (less likely if you can generally surf the net without error messages) or it could contain an error.
    To complicate things a little further, it seems to me that you have (at least) 3 different PDF-handling plugins in Firefox from different programs:
    PDF-XChange Viewer Netscape Gecko Plugin
    Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    Zeon PDF Plugin For Mozilla
    This shouldn't matter too much, thou, as it will most likely simply use either the latest installed or the first one it finds when looking up associations for files of type 'pdf'.
    First, in Tools > Options... > tab General > section File download, select "Save files in" and Browse your way to a (non-writeprotected!) folder on a drive where you're certain there is enough free space - like the Desktop folder to make the files end up on your Windows desktop.
    Second, under Applications as you mention yourself, find all document types related to PDF files, and set these to one of the programs. Check the entire list to be sure there isn't one hiding under one of the other programs' document types (Adobe Acrobat document, PDF X-Change and Zeon).
    Restart Firefox, and try opening a PDF again.
    If it fails once more, try changing the documents again to one of the other programs, like "Use Adobe Acrobat (in Firefox)".
    If it STILL fails, change it to simply "Save file". Then you can simply browse your way to the download folder with Windows Explorer, and doubleclick the PDF file to see which program actually handles PDF files as default on the machine, and if it works properly.
    If Firefox flatly refuses to save the PDF files in a folder which you're certain both exist and has space for the file, some (probably security related) program is most likely interfering with Firefox, preventing it in storing PDF files on the system.

  • After Windows 7 Kernel crash, I cannot start Photoshop CC any longer.

    After Windows 7 Kernel crash and Windows Reboot, I cannot start Photoshop CC any longer. After Photoshop start, Photoshop terminates itsself with a general error messages. I tried to reinstall CC, without deleting the application settings, but didn't help. I thing the application settings must be changed or reset ?
    Thanks in advance
    Best regards.

    Still searching for any Launch log on my PC that give me some more details about the launch error....any idea where ?

  • After most recent update (3.6.10) cannot connect to internet via any browser or application (Windows Vista)

    I recently updated Firefox to 3.6.10 on a Windows Vista machine and have been unable to connect to the internet with any application since. Any help you can provide would be graciously appreciated.
    Upon receiving the "Firefox has updated and needs to restart" message, I continued to browse the internet for a period of time. When I finished what I was doing, I restarted the browser. When it came back up, it failed to connect to the internet. Signal strength from wireless network is "Very Good" and indicates that I am connected to the internet. I have tried the following with no success:
    - Attempted to connect to internet with Internet Explorer
    - Restarted the machine
    - Disabled Windows firewall
    - Checked that Internet Options settings had not changed
    - Connected to different wireless networks
    After each of the above, I tried to connect with IE and Firefox.
    As an amateur it seems that this isn't a Firefox problem, but I have to assume since the connection was good immediately before restarting the program and the completely inoperative after restarting, that it has something to do with the installation. Thank you very much for your time.
    Reed

    PROBLEM SOLVED:
    In Internet Options under Connections > Settings, "Use system settings" was selected. Changing the selection to "Automatically detect proxy settings for this network" in connection settings allowed all applications to connect to the internet.
    Why "System settings" continues to work on my XP system after the update and why it worked on the Vista system before the update but not after the update is a mystery... but as long as it works, who cares

  • Windows 8 apps crash immediately after opening

    Windows 8 apps crash immediately after opening
    when ever i open any app downloaded from windows store some of them crashes immediately.......
    after re-installing it only works for 1-2 days then again same problem  

    Hi,
    Please also check these two blogs to see if any suggestion work for you when the issue happens again:
    Fix Store App in Windows 8.1
    http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx
    What to do if your Windows 8 Modern App fails to start
    http://blogs.technet.com/b/askperf/archive/2013/10/11/what-to-do-if-your-windows-8-modern-app-fails-to-start.aspx
    If the issue still persists, please post back the %TEMP%\winstore.log
    and saved AppModel-Runtime and Apps event logs under Event Viewer>Applications and Services Logs>Microsoft>Windows here for our research.
    Please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
    Kate Li
    TechNet Community Support

  • Problem with After Effects crashing machine when rendering

    Ive been having a repeated problem with after effects crashing when I try to render a sequence.
    The render halts then first After Effects becomes unresponsive then every other applications follows and I have to hard-restart my machine.
    Can anyone help me find out how to stop this happening?

    i - Illl try to answer these bellow...
    What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number.
    Ive just updated it - I have After Effects CC 13.2.0.49
    Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
    Just don'e this - not tried to render since
    What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    Late Mac operating system Yosamete 10.10.1 (14B25)
    If you are getting error message(s), what is the full text of the error message(s)?
    There is no error message
    What were you doing when the problem occurred? What is the exact sequence of steps that you are taking?
    Performing a render, the render gets partially through but stops at different parts and hangs, then the computer hangs and I have to hard reset.
    Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time?
    I had a similar problem two days ago, i thought it could be a problem with some animated png sequences and a "matte feather" effect so i replaced the sequences with non animated versions and it seemed to fix the problem.
    Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected.
    Model Name: Mac Pro
      Model Identifier: MacPro6,1
      Processor Name: 6-Core Intel Xeon E5
      Processor Speed: 3.5 GHz
      Number of Processors: 1
      Total Number of Cores: 6
      L2 Cache (per Core): 256 KB
      L3 Cache: 12 MB
      Memory: 32 GB
      Boot ROM Version: MP61.0116.B07
      SMC Version (system): 2.20f18
      Illumination Version: 1.4a6
      Serial Number (system): F5KM804VF694
      Hardware UUID: A50DAB15-0502-5AAB-85A9-4F1B1B6DD9C1
    AMD FirePro D500:
      Chipset Model: AMD FirePro D500
      Type: GPU
      Bus: PCIe
      Slot: Slot-1
      PCIe Lane Width: x16
      VRAM (Total): 3072 MB
      Vendor: ATI (0x1002)
      Device ID: 0x679e
      Revision ID: 0x0000
      ROM Revision: 113-C3861J-687
      gMux Version: 4.0.11 [3.2.8]
      EFI Driver Version: 01.00.687
    Displays:
    DELL UP2414Q:
      Resolution: 3008 x 1692 @ 30 Hz
      Pixel Depth: 32-Bit Color (ARGB8888)
      Display Serial Number: WWRHC42G085L
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Rotation: Supported
      Connection Type: DisplayPort
      Television: Yes
    What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)?
    AMD FirePro D500 3072 MB graphics
    Not sure how to find out about CUDA or what it is?
    Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)?
    No
    What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
    Apple Prores4444 and some png sequences
    Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2".
    Quick Time player 10.4
    What other software are you running?
    I have the CC suite and use Premier mostly but not running anything else whilst the problem is occurring
    Do you have any third-party effects or codecs installed?
    I have Video Copilot optical flares (though I've tried switching this off.)
    Are you using OpenGL features in After Effects?
    Im not sure?
    Does the problem only happen with your final output, RAM preview, or both?
    Doesn't appear to hang on RAM preview
    Are you using Render Multiple Frames Simultaneously multiprocessing?
    Yes
    Are you using the ray-traced 3D renderer?
    No
    If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help.
    Best Settings - Outputting as Apple Pro Res 4444
    Hope this is helpful,
    thanks,
    Jonathan

  • I want Firefox to open to my homepage every time after it crashes. I do not want it to return to the tabs and applications that caused the crash. I am willing to lose information. How do I do this?

    Firefox crashes or seizes up when there are too many tabs and applications open, and causes my computer to crash or seize up. I use task manager to close Firefox or I restart my computer. Then, when Firefox restarts again, it automatically re-opens all the tabs and applications that caused the computer to seize or crash in first place. This is a waste of my time. I want Firefox to reopen to my homepage even if it crashes. I am willing to lose information to have Firefox reopen to a low-memory homepage. How do I do this?

    Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    * http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
    See also:
    * https://wiki.mozilla.org/Session_Restore#Preferences
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold (user set).
    *Preferences can be reset to the default via the right-click context menu if they are user set
    *Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

Maybe you are looking for

  • SSO b/w portal and webdynpro application customized login??

    Hi, I  have one webdynpro application which has a login screen (Created as Webdynpro view). If user enters user/passord, the same gets checked from a custom table in the db (Method for checking user credtentials has been written in view controller).

  • Can you use your pc's internet on your ipod?

    I cant get on the wifi network on my ipod because its a weird metwork. Is there anyway for me to connect my ipod to my computer and use the internet on my ipod via my pc?

  • Forgotten seucurtiy password for laptop

    I am unable to send any emails or make updates as I have forgotten my security password or it was changed without me knowing. My hint does not help Any ideas how to fix this. Thanks

  • Syntax error at line 32 : `if' is not matched

    Hi, Submitting concurrent program with host (.prog file)executable to send an email with concurrent program out file for support. given full execution permissions and created soft link. code in .prog file: LOGIN=$1 REQUEST_ID=$4 PREQUEST_ID=$5 SUBJEC

  • Adobe captivate video publisher upload button does nothing

    Hi, on 2 different machines, the adobe captivate video publisher upload button does nothing.  Add to that support says it's not available when I called in on a trial product.  Hmmm if you won't help BEFORE I buy, what will happen after?  c'mon... i'v