Loss of Access for devices that is resolved only b...

I have an issue where 1 laptop (out of 3 using the hub wirelessly) and 2 wireless printers lose connection to the hub.
This is restored when the hub is rebooted but then lost again if the printers go into power save mode or when the laptop is turned off and powered up the following day.
All other devices (wired PC, laptops x 2, ipods and pad all continue to operate without issue)
The laptop in question connects to the home hub but shows this as an "unidentified network (Public Network)" and prevents Internet connection.
Nothing that I have tried via the Network and Sharing centre and the self diagnosis and repair options resolves the issue and I cannot fathom how to change the home hub connection back to the recognised Home Network connection that it will revert to automatically if the hub is rebooted.
When the hub is rebooted, the laptop will connect automatically with no issues.
The same laptop does see the BT-Fon and BT-Wifi options on the hub and will connect to both of these using the appropriate password even when blocked from accessing the hub as the Home Network.
The printers are both shown as being offline. Restarting the printers does not resolve the issue, but restarting the home hub does.
I am sure the solution is straight forward and relates to either the BT NetProtect/MCAfee but don't know where to start.
All suggestions are gratefully received

This might help to get your laptop to connect to the network.
Go to Control Panel -> Network and Sharing Center -> Change adapter settings -> Then 'Right Click' on your Wireless network and select Status > Wireless Properties > tick the box “Connect automatically when network is in range”. Click OK then close.
On the Network and sharing Center you should see your BTHomeHub network. Make sure that it is showing as a " home network" and not a public network.
As regards BT Netprotect / McAfee this does appear to cause problems and the general advice on this forum is to uninstall it and install another Antivirus product such as Microsoft Security Essentials or AVG Free 2013 or Avast free. If you do decide to uninstall BT Netprotect follow this link and be sure to run the McAfee clean up tool as well.
http://bt.custhelp.com/app/answers/detail/a_id/13523/~/i-don't-want-bt-netprotect-plus-anymore.-how-...

Similar Messages

Not offering 6.1.6 security update for devices that can be updated to ios7 is unethical

As a loyal apple customer for 25 years I'm extremely disappointed that Apple is refusing to offer the security update for a major security flaw for those using newer hardware who don't want to otherwise want to update to ios7. Forcing me to update to ios7 to have a secure phone is beyond unethical. Shame on you Apple.

Apple aren't here, so shaming them here is pointless.
For devices that support iOS 7 the fix is in iOS 7.0.6. For devices that only support iOS 7 the fix is in iOS 6.1.6
It's quite simple to understand. Apple always encourages people to use the latest OS their device supports. I doubt that is going to change.
It's your choice to remain on iOS 6 against Apple's advice. Therefore you accept the consequences of your actions.
You want the fix? Then you use the version of iOS for your device that contains it.
Good luck with your class action lawsuit!!!! Haha!

TS4006 Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

How do I place a still graphic in the same place as a flaash animation for devices that do not suppo

How do I place a graphic in the same place on the site that features a Flash animation for devices that do not support as in IPad?

Why not replace your Flash animation with a web friendly jQuery slideshow or rotating banner?
http://jquery.malsup.com/cycle/
http://wowslider.com/
http://nivo.dev7studios.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Looking for devices that can perform straight forward I/Q demodulation process

Hi guys,
I am looking for a high speed NI board that can perform the quadrature demodulation (for a 20 MHz signal), I have looked through the web but so far I can only find 5620, 5660 and 5142.
cos(wt) ----> Device under Test (DUT) -----> Acos(wt + theta)
cos(wt) is the original tranmitting signal (20 MHz). After it is passed through the DUT, amplitude change (A) and phase shift (theta) is then introduced into the output signal (the frequency still remains the same.) The purpose of this setup is to measure the amplitude change and phase shift, relative to the original signal.
Thus I need a simple I/Q demodulation board that can perform this job. Is there any NI board that one can recommend? Or is there a board that can generate the driving signal and do the IQ domodulation at the same time? I think 5620, 5660 and 5142 can only perform I/Q demodulation process...
Thanks for the help!

Duplicate post. See response here.

Migration Option for Devices that Doesn't Meet Requirements

We have a Family MobileMe Pack and have an iMac with Snow Leopard. When I chose to move 2 accounts that the iMac uses to iCloud, I selected the option to "keep using your email after MobileMe ends" so that these accounts will still work on Mail for the iMac.
When I check the accounts under the Master account, these 2 accounts show (Remove Account) instead of (Migrated to iCloud) as is the case for my kids' accounts.
Now I'm confused as to whether these 2 accounts are really migrated or not. And I'm not sure I can move the Master account to iCloud before these 2 accounts have been migrated. I've read I cannot manage any of the family accounts anymore once the Master account moves to iCloud. But time is running out.
So confused. Any assistance is appreciated. Thanks.

If you have a Family Pack, each sub-account and the master account can be regarded as individual and separate for the purposes of the exercise. In each case all you have to do is go to http://me.com/move and follow the instructions, and it doesn't matter what order you do it in. Because of confusingly worded instructions from Apple some people have got the impression they have to cancel the sub-accounts first: do not do this.
If you migrate the master account first the others will continue to run: obviously what was the master account will not have any control over them nor be able to administer or delete them in the event it wanted to. If you migrate a sub-account while the master account is still running you can't create a new sub-account to fill the gap. Aliases will be maintained but unlike in the MobileMe Family Pack you cannot convert an alias to a full iCloud account.
Apple have provided a facility for MobileMe users whose computers don't meet the requirements to migrate their email only to iCloud. If you choose this option only your email will be migrated to iCloud. It's not entirely clear whether this takes place immediately or waits until July 1, but you can easily check by seeing whether your email is available at http://me.com or athttp://icloud.com - if the latter, the migration has taken place (give it time to take effect before checking).
On July 1 all other data on MobileMe will be deleted, but your email will be accessible at http://icloud.com.
Though Apple have not included this information, you will be able to set mail up manually to access your iCloud email by following the instructions on these pages:
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger
Apple have not stated what will happen if you do not follow this process. It seems safe to assume that in that case your emails will be deleted and you will lose the account.

SNMP for devices that do not accept inbound snmp

Hi All,
I have a requirement to monitor a network device (Cisco) which doesn't accept SNMP requests (161) but it will send out snmp traps on port 162.
I have setup my SCOM 2012 R2 server (running on windows 2008 r2) as per many of the blogs guide, but I think the reason that I am not getting any alerts through is that you need to discover the network device via the snmp protocol before you can monitor
it (ucmp not enough).
Has anyone had a similar situation and found a solution? Would a SMNP proxy work?
Please see the bottom comment on this blog where someone else has asked the same question but without a real solution.
http://kevingreeneitblog.blogspot.co.uk/2012/01/scom-2012-network-monitoring-magic.html

Terry,
As you figured out already, you do have to be able to discover the device using SNMP get. Otherwise SCOM will not accept traps.
Yes, you could use a SNMP proxy. There are just forwarders or ones that write the trap into the event log from where you could get them using an event log rule/monitor.
Or you could use System Center Orchestrator and raise an alert in SCOM directly.
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

HT201317 iOS Photo Stream for devices that are at home

When two devices are located at the same house/router, do they still upload to iCloud to/from the iOS device and computer?
Agust

Yes. Why, are you have a problem?

Need text based app for iPhone that backs up only to wired iTunes

I don't mind using iCloud or Dropbox for most of my files, but there is one file I won't use them for. My manually created username and passwords document.
This used to be accomplished by using Apple's Notes on the iPhone which would backup automatically when Notes on the Mac was imbedded in Mail. Since I upgraded to OS X 10.9 Notes on the Mac is a stand alone app and, I guess, will only sync with Mail on the iPhone through the iCloud. Therefore I'm looking for some simple, but reliable app that I can use to create and maintain a simple list on both the iPhone and the Mac that does NOT use cloud based services to sync data.
Yes, I may be paranoid, but I will not compromise this particulat data.
Thanks in advance,
Harry

I would say it's time to switch to a password manager app, such as 1Password. It encrypts your data and will sync between Mac and iOS through Dropbox. The app itself requires a password in order to view the content.
I totally understand your hesitance to put your content in the cloud, but this may be the way to go.
You might want to see if there are any other note-taking apps that will allow you to export the data through iTunes - it won't necessarily "sync" to an app on your Mac but you would at least be able to save the file and transfer back & forth via USB.
Alternatively, downgrade your Mac to an earlier version of OS X.
~Lyssa

I purchased a mac book-pro over 2 years ago and it keeps asking for updates that it will only let me update using the old users apple ID, i cant figur out how to remove it i wint to an apple store and they were stumped

i cant get rid of the other users ID, i have tired to remove this id many many times, it will let me use my ID to do updates but it will nto let me do the updates associated that id the original user. any ideas

Delete all of the applications associated with that Apple ID.
(119669)

How can i find the history of devices that has been connected to my itunes?

i wanna see old device that i once connected to my itunes. is there a way that can check. i have gone to manage my device but thats only for currect devices. im just wanna see back a couple of months.

pvillecisco wrote:
i wanna see old device that i once connected to my itunes. is there a way that can check. i have gone to manage my device but thats only for currect devices
Actually, that is for devices that have been set to automatically download or you have used to redownload previously purchased items.
They will show until you delete them.

Restricting Access for SQ01 User Group

Hi ,
Please let me how to Restrict Access for a User Group to only some of the specific users?
Thank you
Edited by: Vibhor Arora on Apr 12, 2010 7:29 AM

Hi,
Can you please clarify what exactly you want to know, your request can be interpreted in a few different ways.
If you are concerned that people have access to all user groups, then you need to remove access to S_QUERY activity 02 and I think activity 23. They will lose access to all user groups that they are not assigned to via SQ03.

Unable to provision Business Rules access for users

Hi all,
Our analytic server is properly configured in Shared Services : we can correctly create users, provision Essbase access for those users, change password, etc...
An application business rules is visible in the left pane of shared services, but we are not able to provision Business rules access for users.
When we try to provision access for a user, we have only access to the Analytic properties.
What's going wrong ?

It sounds like the user you login to HSS with hasn't been assigned with "Provisioning Mgr" rights to business rules.
Get the HSS admin user to grant you these rights and you should then be able to provision users to use Business RUles.
Gee

May i know what is plugin-container.exe and why it need internet access , noticed that it started only when i visit any website has Flash containt ? is it adobe flash player plugin ? is it safe to use ?

May i know what is Plugin-container,exe and why it need internet access ? noticed that it starts only when visit any website has flash containt on webpage . is this adobe flash player plugin ? is it safe to use ?

See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices. How do I resolve this so I can add this email address to my iPhone?

I'm unable to add the email address for iMessage, that I was using before iOS 7 to my iPhone, because it says that it is "in use by another device," but I have no other devices. How do I resolve this so I can add this email address to my iPhone to send and recieve iMessages?

Sync your iPhone to iTunes, and see if that does the trick. Also you could try a Soft Reset with no Risk to Data. Holding down both the Sleep button and the Home button until the Apple logo appears and then waiting for the Reset to bring you iPhone back to the lock screen. Are you trying to add the email at Settings>Messages>Send and Receive from (2 Addresses) your iPhone number and your email address?

Loss of Access for devices that is resolved only b...

Similar Messages

Maybe you are looking for